Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLICATION FACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Electron ptychography achieves atomic-resolution limits set by lattice vibrations

Transmission electron microscopes use electrons with wavelengths of a few picometers, potentially capable of imaging individual atoms in solids at a resolution ultimately set by the intrinsic size of an atom. However, owing to lens aberrations and multiple scattering of electrons in the sample, the image resolution is reduced by a factor of 3 to 10. By inversely solving the multiple scattering problem and overcoming the electron-probe aberrations using electron ptychography, we demonstrate an instrumental blurring of less than 20 picometers and a linear phase response in thick samples. The measured widths of atomic columns are limited by thermal fluctuations of the atoms. As a result, our method is also capable of locating embedded atomic dopant atoms in all three dimensions with subnanometer precision from only a single projection measurement.

42 ENGINEERING↗

Estimating big bluestem albedo from directional reflectance measurements

Multidirectional reflectance factor measurements acquired in the summer of 1986 are used to make estimates of big bluestem grass albedo, evaluating the variation of albedo with changes in solar zenith angle and phenology. On any given day, the albedo was observed to increase by at least 19 percent as solar zenith angle increased. Changes in albedo were found to correspond to changes in the green leaf area index of the grass canopy. Estimates of albedo made using reflectance data acquired within only one or two azimuthal planes and at a restricted range of view zenith angle were evaluated and compared to 'true' albedos derived from all available reflectance factor data. It was found that even a limited amount of multiple direction reflectance data was preferable to a single nadir reflectance factor for the estimation of prarie grass albedo.

Irons, J. R.↗

Glucocorticoids indirectly decrease colon cancer cell proliferation and invasion via effects on cancer-associated fibroblasts

Highlights: • Indirect effects of glucocorticoid treatment on cancer cells via CAFs are described. • Glucocorticoids decrease expression of MMP-2 by CAFs. • Glucocorticoids neutralize growth-promoting and pro-invasive effects of CAFs. • In vivo, glucocorticoid treatment inhibits tumor progression. Cancer-associated fibroblasts (CAFs) support cancer growth, invasion, and metastasis. Glucocorticoids (GCs), drugs often administered together with chemotherapy, are steroidal ligands of the glucocorticoid receptor (GR), a transcription factor which upon activation regulates expression of multiple genes involved in suppression of inflammation. We have previously shown that in dexamethasone (Dex)-treated CAFs derived from colon cancer, production and secretion of several factors related to cancer progression, such as tenascin C (TNC) and hepatocyte growth factor (HGF), were strongly suppressed. In this study we show that GCs can neutralize the cancer cell-promoting properties of CAFs. Conditioned medium from solvent-treated CAFs (CM{sup CTRL}) stimulates proliferation, motility and stretched morphotype of GR-deficient HCT8/E11 colon cancer cells. Yet, HCT8/E11 proliferation and stretched morphotype are impaired upon treatment with conditioned medium from Dex-treated CAFs (CM{sup DEX}), but HCT8/E11 cell migration is slightly increased under these conditions. Moreover, expression and potential activity of MMP-2 is also reduced in CM{sup DEX} compared with CM{sup CTRL}. These combined in vitro results concur with the results from in vivo chick chorioallantoic membrane assays, where the co-cultures of CAFs with colon cancer cells displayed impaired tumor formation and cancer cell invasion due to Dex administration. Combined, GC treatment influences cancer cell behavior indirectly through effects on CAFs.

60 APPLIED LIFE SCIENCES↗

Association between long-term exposure to ambient air pollution and diabetes mortality in the US

Highlights: • The NIH-AARP Diet and Health Study was linked with latest prediction models for PM{sub 2.5}, NO{sub 2}, and O{sub 3}. • Long-term exposures to PM{sub 2.5} and NO{sub 2} are significantly associated with elevated diabetes mortality risk. • The associations were significantly modified by BMI and total fruit consumption. Recent mechanistic and epidemiological evidence implicates air pollution as a potential risk factor for diabetes; however, mortality risks have not been evaluated in a large US cohort assessing exposures to multiple pollutants with detailed consideration of personal risk factors for diabetes.

54 ENVIRONMENTAL SCIENCES↗

Integrating human factors issues into critical portable detection usage - 121

There are multiple situations where portable detection systems are used to quantify distributed radionuclides. Such applications include holdup measurements in decommissioning activities, other routine usage and safeguards applications. Human factors dominate equipment deployment and operation and have significant impact upon the resulting data collection and its quality. Equipment use includes simultaneous positioning and targeting the object/region being quantified, observation and reporting of incoming data, often in difficult conditions and often while dressed in protective equipment. We examine the human interface with the equipment and other human factors where balance, perception, situational awareness and personnel health level influence the physical control and positioning of the detector. All these aspects impact both the measurement outcome and the Total Measurement Uncertainty (TMU). In this work, we are developing approaches and solutions to: 1. Initiate an inclusive program to assess and evolve human factors aspects of the interface to provide real time feedback tailored to a specific field operator profile. 2. Develop a measurement system human interface on a 'bench top' detection system to allow for both audio and visual I/O for auditory attention and situational (objective and subjective) awareness across varied end user characteristics. 3. Assess and develop an enhanced health assessment plan to identify and monitor pertinent auditory and balance characteristics for operator(s) interface and physical control of the gamma detector. Use the plan to verify personnel ability for effective deployment. We take a multidisciplinary approach to maximize accuracy, efficiency, and safety for the end-user to optimize project and measurement performance. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

GATA3 acetylation at K119 by CBP inhibits cell migration and invasion in lung adenocarcinoma

Highlights: • GATA3 interacts with and is acetylated by the acetyltransferase CBP. • The major acetylated site of GATA3 in lung adenocarcinoma cells is lysine 119. • GATA3 is deacetylated by Class I deacetylases HDAC1, HDAC2 and HDAC3. • The acetylation status of GATA3-K119 is critical to lung adenocarcinoma progression. GATA3 is a transcriptional factor involved in the development of multiple organs. Post translational modifications of GATA3 are critical to its function. Here, we report that GATA3 interacts with and is acetylated by the acetyltransferase CBP. Class I deacetylases HDAC1, HDAC2 and HDAC3 deacetylate GATA3. The major acetylated site of GATA3 in lung adenocarcinoma cells was determined at lysine 119 (AcK119). Functionally, GATA3-acetylation mimics K119Q mutant was found to inhibit lung adenocarcinoma cell migration and invasion with concomitant downregulation of EMT-controlling transcriptional factors Slug, Zeb1 and Zeb2. Taken together, we demonstrated that GATA3 acetylation at lysine 119 by CBP hinders the migration and invasion of lung adenocarcinoma cells.

60 APPLIED LIFE SCIENCES↗

Lessons Learned from Performing a Human Factors Engineering Validation of an Upgraded Digital Control System in a Nuclear Power Plant Control Room

The United States' fleet of nuclear power plants (NPPs) have exceeded their original 40-year licenses and many are seeking license renewals to continue operations into the future. To support continued operation the Department of Energy's (DOE) Light Water Reactor Sustainability Program (LWRS) provides support for utilities to maintain and upgrade their power production capabilities. Control room modernization is one focus area, which aims to modernization the analog control rooms with digital controls and human-system interfaces (HSIs). The Turbine Control System (TCS) is a non-safety related system undergoing modernization efforts at multiple plants and utilities. Considerable human factors research efforts, comprised of expert reviews and operator in the loop studies were performed to develop human factors compliant and usable TCS. This report documents the final phase of the human factors engineering program used to design and validate the new digital TCS. According to the NUREG-0711 review guide, one of the last steps of human factors engineering program prior to implementation is human factors validation. This report details the method, results and conclusions from the human factors validation study of a collaborating utilities TCS slated to be implemented in one of their plants. One control room team consisting of two control room supervisors and two reactor operators participated in the validation. All team members had participated in the BNP TCS training program foregoing the TCS validation. Performance measures included task performance, situation awareness and workload, expert observation of any negative influences of human-system interface features on control room team performance, and interviews with the participating operators. Performance criteria were based on the performance scores and the topics identified by interviews and expert observations. The results showed that the crew using the new TCS clearly could achieve their overall objectives in the test scenarios with sufficient situation awareness. The new TCS compared to the old system provided clear improvements of the control room work regarding shell and chest warming and regarding valve and other system testing. However, a number of Human Engineering Discrepancies (HEDs) were identified. HEDs were prioritized (level 1, 2 or 3) according to potential safety, plant availability, operability or personnel performance consequences. Since no priority 1 HEDs were identified there is no HFE reason not to continue implementation of the TCS. The TCS upgrade is acceptable if the Priority 2 HEDs are resolved and dispositioned in a satisfactory way. Priority 3 HEDs should be noted and considered for future modifications.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

THE MERGER HISTORY, ACTIVE GALACTIC NUCLEUS, AND DWARF GALAXIES OF HICKSON COMPACT GROUP 59

Compact group galaxies often appear unaffected by their unusually dense environment. Closer examination can, however, reveal the subtle, cumulative effects of multiple galaxy interactions. Hickson Compact Group (HCG) 59 is an excellent example of this situation. We present a photometric study of this group in the optical (Hubble Space Telescope), infrared (Spitzer), and X-ray (Chandra) regimes aimed at characterizing the star formation and nuclear activity in its constituent galaxies and intra-group medium. We associate five dwarf galaxies with the group and update the velocity dispersion, leading to an increase in the dynamical mass of the group of up to a factor of 10 (to 2.8 Multiplication-Sign 10{sup 13} M{sub Sun }), and a subsequent revision of its evolutionary stage. Star formation is proceeding at a level consistent with the morphological types of the four main galaxies, of which two are star-forming and the other are two quiescent. Unlike in some other compact groups, star-forming complexes across HCG 59 closely follow mass-radius scaling relations typical of nearby galaxies. In contrast, the ancient globular cluster populations in galaxies HCG 59A and B show intriguing irregularities, and two extragalactic H II regions are found just west of B. We age-date a faint stellar stream in the intra-group medium at {approx}1 Gyr to examine recent interactions. We detect a likely low-luminosity active galactic nucleus in HCG 59A by its {approx}10{sup 40} erg s{sup -1} X-ray emission; the active nucleus rather than star formation can account for the UV+IR spectral energy distribution. We discuss the implications of our findings in the context of galaxy evolution in dense environments.

79 ASTRONOMY AND ASTROPHYSICS↗

Distributed-memory lattice H-matrix factorization

We parallelize the LU factorization of a hierarchical low-rank matrix (H-matrix) on a distributed-memory computer. This is much more difficult than the H-matrix-vector multiplication due to the dataflow of the factorization, and it is much harder than the parallelization of a dense matrix factorization due to the irregular hierarchical block structure of the matrix. Block low-rank (BLR) format gets rid of the hierarchy and simplifies the parallelization, often increasing concurrency. However, this comes at a price of losing the near-linear complexity of the H-matrix factorization. In this work, we propose to factorize the matrix using a “lattice H-matrix” format that generalizes the BLR format by storing each of the blocks (both diagonals and off-diagonals) in the H-matrix format. These blocks stored in the H-matrix format are referred to as lattices. Thus, this lattice format aims to combine the parallel scalability of BLR factorization with the near-linear complexity of H-matrix factorization. We first compare factorization performances using the H-matrix, BLR, and lattice H-matrix formats under various conditions on a shared-memory computer. Our performance results show that the lattice format has storage and computational complexities similar to those of the H-matrix format, and hence a much lower cost of factorization than BLR. In conclusion, we then compare the BLR and lattice H-matrix factorization on distributed-memory computers. Our performance results demonstrate that compared with BLR, the lattice format with the lower cost of factorization may lead to faster factorization on the distributed-memory computer.

97 MATHEMATICS AND COMPUTING↗

Rewiring the specificity of extracytoplasmic function sigma factors

Significance Bacterial phenotypes require the concerted expression of multiple genes, usually coordinated by a transcriptional regulator. Although the functions of many genes in sequenced bacterial genomes can be inferred, the regulatory networks that coordinate their expression are only known in a few model systems. Using a bioinformatic and experimental approach, we solve the DNA-specificity code of extracytoplasmic function sigma factors (ECF σs), a major class of bacterial regulators. We develop and use a high-stringency pipeline to predict the genes regulated by 67% of ECF σs in >10,000 species, providing a comprehensive look at the role of a broadly distributed family of gene regulatory proteins. This conceptual and computational framework is potentially applicable to other bacterial regulators.

59 BASIC BIOLOGICAL SCIENCES↗

Parallel Memory-Independent Communication Bounds for SYRK

In this paper, we focus on the parallel communication cost of multiplying a matrix with its transpose, known as a symmetric rank-k update (SYRK). SYRK requires half the computation of general matrix multiplication because of the symmetry of the output matrix. Recent work (Beaumont et al., SPAA '22) has demonstrated that the sequential I/O complexity of SYRK is also a constant factor smaller than that of general matrix multiplication. Inspired by this progress, we establish memory-independent parallel communication lower bounds for SYRK with smaller constants than general matrix multiplication, and we show that these constants are tight by presenting communication-optimal algorithms. The crux of the lower bound proof relies on extending a key geometric inequality to symmetric computations and analytically solving a constrained nonlinear optimization problem. Here, the optimal algorithms use a triangular blocking scheme for parallel distribution of the symmetric output matrix and corresponding computation.

Communication costs↗

Effect of Multiple Scattering on the Compton Recoil Current Generated in an EMP, Revisited

Multiple scattering has historically been treated in EMP modeling through the obliquity factor. The validity of this approach is examined here. A simplified model problem, which correctly captures cyclotron motion, Doppler shifting due to the electron motion, and multiple scattering is first considered. The simplified problem is solved three ways: the obliquity factor, Monte-Carlo, and Fokker-Planck finite-difference. Because of the Doppler effect, skewness occurs in the distribution. It is demonstrated that the obliquity factor does not correctly capture this skewness, but the Monte-Carlo and Fokker-Planck finite-difference approaches do. Here, the obliquity factor and Fokker-Planck finite-difference approaches are then compared in a fuller treatment, which includes the initial Klein-Nishina distribution of the electrons, and the momentum dependence of both drag and scattering. It is found that, in general, the obliquity factor is adequate for most situations. However, as the gamma energy increases and the Klein-Nishina becomes more peaked in the forward direction, skewness in the distribution causes greater disagreement between the obliquity factor and a more accurate model of multiple scattering.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

The Shifting Role of mRUE for Regulating Ecosystem Production

To design a comprehensive view of ecosystem resource use, in this work we integrated parallel resource use efficiency observations into a multiple-resource use efficiency (mRUE) framework using a dynamic factor analysis model. Results from 56 site-years of eddy covariance data and mRUE factors for a site in the US Midwest show temporal dynamics and coherence (using Pearson’s R) among resources are associated with interannual variation in precipitation. Loading factors are derived from mRUE observations and quantify how strongly data are connected to the underlying ecosystem state. Water and light resource use loading factors are coherent at annual timescales (Pearson’s R of 0.86), whereas declining patterns of carbon use efficiency loading factors highlight the ecosystem’s trade-off between carbon uptake and respiration during the growing season. At annual and monthly timescales, influence decreases from ~85 to ~65% for loading factors for carbon use, while influence of light use loading factors peaks to ~60% at growing season timescales. Quantifying variation in ecosystem function provides novel insights into the temporal dynamics of changing significance of multiple resources to ecosystem function.

54 ENVIRONMENTAL SCIENCES↗

Comparison of Multisine Peak Factor Minimization Algorithms for Aircraft System Identification

Two phase-optimized multisine peak factor minimization algorithms are presented and evaluated. The first algorithm minimizes peak factor by iteratively clipping the peaks of generated multisine signals. The second algorithm optimizes peak factor indirectly through minimization of an approximation of the infinity norm of the multisine. Algorithm performance was evaluated as a function of different signal properties, including the number of harmonics, harmonic spacing, and number of snow harmonics (extra harmonics included for further reduction of the peak factor). The two algorithms are compared against results obtained by minimizing peak factor directly using a simplex algorithm, which has been a common approach when designing phase-optimized multisines for system identification flight tests. Sample results show that the clipping and infinity norm algorithms produced multisine signals with comparable peak factors that were lower than that of the simplex algorithm. However, the clipping algorithm runs an order of magnitude faster than the other two algorithms, which also makes it practical to repeat the algorithm multiple times to achieve even lower peak factors.

system identification↗

Comparison of Multisine Peak Factor Minimization Algorithms for Aircraft System Identification(Presentation)

Two phase-optimized multisine peak factor minimization algorithms are presented and evaluated. The first algorithm minimizes peak factor by iteratively clipping the peaks of generated multisine signals. The second algorithm optimizes peak factor indirectly through minimization of an approximation of the infinity norm of the multisine. Algorithm performance was evaluated as a function of different signal properties, including the number of harmonics, harmonic spacing, and number of snow harmonics (extra harmonics included for further reduction of the peak factor). The two algorithms are compared against results obtained by minimizing peak factor directly using a simplex algorithm, which has been a common approach when designing phase-optimized multisines for system identification flight tests. Sample results show that the clipping and infinity norm algorithms produced multisine signals with comparable peak factors that were lower than that of the simplex algorithm. However, the clipping algorithm runs an order of magnitude faster than the other two algorithms, which also makes it practical to repeat the algorithm multiple times to achieve even lower peak factors.

flight test↗

Quantifying wildfire drivers and predictability in boreal peatlands using a two-step error-correcting machine learning framework in TeFire v1.0

Abstract. Wildfires are becoming an increasing challenge to the sustainability of boreal peatland (BP) ecosystems and can alter the stability of boreal carbon storage. However, predicting the occurrence of rare and extreme BP fires proves to be challenging, and gaining a quantitative understanding of the factors, both natural and anthropogenic, inducing BP fires remains elusive. Here, we quantified the predictability of BP fires and their primary controlling factors from 1997 to 2015 using a two-step correcting machine learning (ML) framework that combines multiple ML classifiers, regression models, and an error-correcting technique. We found that (1) the adopted oversampling algorithm effectively addressed the unbalanced data and improved the recall rate by 26.88 %–48.62 % when using multiple datasets, and the error-correcting technique tackled the overestimation of fire sizes during fire seasons; (2) nonparametric models outperformed parametric models in predicting fire occurrences, and the random forest machine learning model performed the best, with the area under the receiver operating characteristic curve ranging from 0.83 to 0.93 across multiple fire datasets; and (3) four sets of factor-control simulations consistently indicated the dominant role of temperature, air dryness, and climate extreme (i.e., frost) for boreal peatland fires, overriding the effects of precipitation, wind speed, and human activities. Our findings demonstrate the efficiency and accuracy of ML techniques in predicting rare and extreme fire events and disentangle the primary factors determining BP fires, which are critical for predicting future fire risks under climate change.

54 ENVIRONMENTAL SCIENCES↗

Source identification by non-negative matrix factorization combined with semi-supervised clustering

Machine-learning methods and apparatus are provided to solve blind source separation problems with an unknown number of sources and having a signal propagation model with features such as wave-like propagation, medium-dependent velocity, attenuation, diffusion, and/or advection, between sources and sensors. In exemplary embodiments, multiple trials of non-negative matrix factorization are performed for a fixed number of sources, with selection criteria applied to determine successful trials. A semi-supervised clustering procedure is applied to trial results, and the clustering results are evaluated for robustness using measures for reconstruction quality and cluster separation. The number of sources is determined by comparing these measures for different trial numbers of sources. Source locations and parameters of the signal propagation model can also be determined. Disclosed methods are applicable to a wide range of spatial problems including chemical dispersal, pressure transients, and electromagnetic signals, and also to non-spatial problems such as cancer mutation.

97 MATHEMATICS AND COMPUTING↗

Source identification by non-negative matrix factorization combined with semi-supervised clustering

Machine-learning methods and apparatus are provided to solve blind source separation problems with an unknown number of sources and having a signal propagation model with features such as wave-like propagation, medium-dependent velocity, attenuation, diffusion, and/or advection, between sources and sensors. In exemplary embodiments, multiple trials of non-negative matrix factorization are performed for a fixed number of sources, with selection criteria applied to determine successful trials. A semi-supervised clustering procedure is applied to trial results, and the clustering results are evaluated for robustness using measures for reconstruction quality and cluster separation. The number of sources is determined by comparing these measures for different trial numbers of sources. Source locations and parameters of the signal propagation model can also be determined. Disclosed methods are applicable to a wide range of spatial problems including chemical dispersal, pressure transients, and electromagnetic signals, and also to non-spatial problems such as cancer mutation.

Alexandrov, Boian S.↗