Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MATRIX MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Energy of interaction between carbon impurities in paramagnetic γ-iron

The energies of interaction between carbon impurity atoms in paramagnetic fcc iron (austenite) are calculated using electron density functional theory. Point defects in the paramagnetic matrix are described using a statistical approach that takes into account local magnetic fluctuations and atomic relaxation in the environment of impurity atoms. It is shown that, in addition to local deformations, magnetism significantly contributes to the energies of dissolution and interaction of carbon atoms. The values of the carbon-carbon interaction energy are indicative of a significant repulsion between these atoms in the first and second coordination spheres. The results of calculations are consistent with estimates obtained from experimental data on the activity of carbon impurity atoms in iron.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Infrared photoluminescence from GeSi nanocrystals embedded in a germanium–silicate matrix

We investigate the structural and optical properties of GeO/SiO{sub 2} multilayers obtained by evaporation of GeO{sub 2} and SiO{sub 2} powders under ultrahigh vacuum conditions on Si(001) substrates. Both Raman and infrared absorption spectroscopy measurements indicate the formation of GeSi nanocrystals after postgrowth annealing at 800°C. High-resolution transmission electron microscopy characterizations show that the average size of the nanocrystals is about 5 nm. For samples containing GeSi nanocrystals, photoluminescence is observed at 14 K in the spectral range 1500–1600 nm. The temperature dependence of the photoluminescence is studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dispersion of Lifetimes of Excited States of Single Molecules in Organic Matrices at Ultralow Temperatures

Fluorescence excitation spectra of single terrylene molecules in transparent naphthalene and polyethylene matrices at ultralow (30–100 mK) temperatures have been studied under the conditions where the widths of zero-phonon spectral lines are determined only by the lifetime T{sub 1} of the excited electronic state. The experimentally observed dispersion of T{sub 1} values for identical molecules is attributed to local field effects, which are responsible for the dependence of T{sub 1} on the effective value of refractive index n of the matrix, which is characteristic of the localization region of each molecule. It has been shown that the dependence T{sub 1}(n) for ensembles of point emitters in organic matrices is satisfactorily explained within the model of a “virtual cavity” around the emitter inside a continuous medium, as well as within the developed quantum kinetic approach including various contributions of the local environment to the lifetime T{sub 1}. The recalculation of average T{sub 1} values to the corresponding n values with the use of the expressions obtained for T{sub 1}(n) has shown that the difference of the calculated refractive indices of naphthalene and polyethylene from the well-known tabulated n values is less than 1%.

74 ATOMIC AND MOLECULAR PHYSICS↗

Experimental Study of Spontaneous Emission in the Bragg Multiple Quantum Wells Structure of InAs Monolayers Embedded in a GaAs Matrix

Time-resolved photoluminescence of a Bragg structure of InAs-monolayer quantum wells in GaAs matrix was experimentally studied with. Comparison of luminescence patterns from the side and from the surface of a sample showed that Bragg-type ordering of quantum wells leads to a substantial alteration of the photoluminescence spectra including appearance of additional radiative modes. The sample side spectrum contains a single line corresponding to a ground state of an exciton. The surface spectrum at high excitation levels a new radiation line appears whose frequency and propagation angle correspond to the Bragg condition for quantum wells. A numerical calculation of the modal Purcell factor explains why the radiative emission amplification occurs only at a set of specific angles and frequencies, as opposed to the whole range that satisfies the Bragg condition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Specific Features of the Electron Spin Resonance of an Iron Impurity in HgSe Crystals

The electron-spin-resonance spectra of transition metal ions Fe in the HgSe matrix are analyzed. The spectra have an appearance typical of the Fe{sup 3+} ion, i.e., they consist of five fine-structure lines with a splitting that corresponds to a weak crystal field. The spectra are observed at temperatures of up to 50 K. The spectral lines are deformed and have a Dyson shape. An analysis of the temperature dependences of the line amplitudes shows that a transition from paramagnetic ordering to ferromagnetic ordering occurs with decreasing temperature, with the Curie temperature T ≈ 7 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature Coefficient of Movement of the Resonance Level of Iron in Pb{sub 1 – x} {sub – y}Sn{sub x}Fe{sub y}Te Alloys

The phase and elemental composition and the temperature dependences of the resistivity and Hall coefficient (temperature range 4.2 K ≤ T ≤ 300 K, magnetic fields B ≤ 0.07 T) are studied in Pb{sub 1 – x– y}Sn{sub x}Fe{sub y}Te alloys with varying matrix composition and iron-impurity concentration along single-crystal ingots synthesized by the Bridgman–Stockbarger method. The distributions of tin and iron along ingots are obtained. Anomalous temperature dependences of the Hall coefficient related to the Fermi-level pinning by the resonance level of iron located in the valence band of the alloys are found. The experimental results are analyzed within the model of transformation of the electronic structure, involving iron level movement with respect to the top of the valence band with increasing tin concentration and temperature. The temperature coefficient of the iron level movement with respect to the midgap is determined. Possible diagrams of transformation of the electronic structure with increasing temperature in alloys with the normal spectrum (0.06 ≤ x ≤ 0.35) are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Equilibrium and Surface Properties of a Binary System Containing Nanoparticles

A consistent description of phase equilibrium and surface phenomena in binary systems containing monodisperse spherical nanoparticles of arbitrary (including nanoscale) size is presented in the context of the classical method with separating surfaces. Using the obtained relations, we have calculated the composition of coexisting phases and interface layer, and interfacial tension on the boundary between nanoparticles and the matrix at different temperatures in Ti-Mo system. The results of the calculations are consistent with the available experimental data.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Emission Properties of Metal Porous Cathodes Modified by Nanocarbon

The results of studying the emissive ability, structure, and elemental composition of the surface of an impregnated cathode with a fine-grained tungsten matrix with addition of polyhedral multilayer carbon nanostructures of the fulleroid type (0.2−0.7 wt %), impregnated with barium-calcium aluminate with addition of sulfoadduct of carbon nanoclusters (0.1−0.2 wt %), are presented. The tests in diode prototypes showed that these cathodes provide a current density of 20 A/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Peculiarities of Phase Transformations of Polymer Solutions in Deformable Porous Matrices

Methods of equilibrium chemical thermodynamics have been used to simulate laws of the influence of geometric factors (pore shape and volume) on the phase equilibria is stratifying polymer solutions in porous matrices. Using the example of the phase separation in a liquid polybutadiene–polystyrene system, it is established that deformation of the porous matrix determining the geometric characteristics of pores can be used to control the mutual solubilities of components and the volumes and thermodynamic stability of coexisting equilibrium phases. Significant deformations of the matrix lead to suppression of the phase separation in pores and make any solution compositions possible (up to equimolar mixtures).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Possibility of Synthesizing Nanosize Molybdenum Carbide in Atmospheric Electrodischarge Plasma

The results of experimental studies indicating the possibility of obtaining molybdenum carbide crystalline phases in a dc arc discharge plasma initiated inside a hollow graphite cathode in the air gaseous atmosphere under normal atmospheric conditions are presented. According to the X-ray diffraction data, two molybdenum carbide phases are identified in the powder synthesis product: Mo{sub 1.2}C{sub 0.8} and Mo{sub 2}C, as well as graphite and metallic molybdenum. According to the transmission electron microscopy data, molybdenum carbide particles are in the carbon matrix and are characterized by dimensions mostly not exceeding 5–10 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Examination of Hybrid Metal Coatings for Mitigation of Fission Product Release and Corrosion Protection of LWR SiC/SiC

There is a need to increase the safety margins of current and future light water reactors (LWRs) due to the unfortunate events at Fukushima Daiichi Nuclear Plant. Safety is crucial to restore public confidence in nuclear energy, acknowledged as an economical, high-­density energy solution to climate change. The development of accident-­tolerant fuel (ATF) concepts is crucial to this endeavor. The objective of ATF is to delay the consequences of accident progression, being inset in high temperature steam and maintaining high thermomechanical strength for radionuclide retention. The use of advanced SiCf-­SiC composite as a substitute for zircaloy-­based cladding is being considered. However, at normal operations, SiC is vulnerable to the reactor coolant and may corrode at an unacceptable rate. As a ceramic-­matrix composite material, it is likely to undergo microcracking operation, which may compromise the ability to contain gaseous fission products. A proposed solution to both issues is the application of mitigation coatings for use in normal operations. At Oak Ridge National Laboratory (ORNL), three coating technologies have been investigated with industry collaborators and vendors. These are electrochemical deposition, cathodic arc physical vapor deposition (PVD hereafter) and vacuum plasma spray (VPS). The objective of this document is to summarize these processing technologies, the resultant as-­processed microstructures and properties of the coatings. In all processes, substrate constraint resulted in substantial tensile stresses within the coating layer. Each technology must mitigate this tensile stress. Electrochemical coatings use chromium as the coolant facing material, and are deposited on a nickel or carbon “bond coat”. This is economical but suffers microcracking in the chromium layer. PVD-­based coatings use chromium and titanium in both metallic form and nitrides, and can be deposited defense-­in-­depth as multilayers. This vapor method eliminated tensile stress during processing and coatings were up to ~30 μm thick without microcracking. VPS produced coatings based on Zircaloy-2, which has a proven reactor-­compatibility. The tensile stresses appearred to be partially mitigated by annealing. Analysis showed that VPS coatings required further optimizations to prevent adverse reactions with the substrate and need a minimum thickness of ~50 μm. In addition, development of coatings are constrained by neutronic depletion analysis, which clearly indicated enrichment as an issue if the coating is too thick. Based on the present work, the cathodic arc PVD technology was considered ready for the extensive testing and evaluation on cladding materials due to their ability to mitigate the excessive tensile stresses and the reasonable coating quality achieved. The VPS Zircaloy-­2 coating technology required additional development toward mitigation of issues related to the substrate reaction and porosity. In the future, PVD and VPS will have be scaled upon successful development and demonstration. Electrochemical coatings, which are proven scalability, currently require development to mitigate issues related to the tensile stress after deposition.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Status Summary of FY16 Atom Probe Tomography Studies on UCSB ATR-2 Irradiated RPV Steels

The University of California Santa Barbara-2 RPV Steel Irradiation experiment was awarded in 2010 by the Nuclear Science User Facility (formerly ATR NSUF) through a competitive peer review proposal process. The experiment involved irradiation of nearly 1300 samples distributed over 13 capsules. The major objective of this experiment was to better understand embrittlement behavior of reactor pressure steels at doses beyond which available data exists yet may be achieved if reactor operating licenses are extended beyond 60 years. The experiment was instrumented during irradiation and active temperature control was used to maintain the temperature at the design temperature. Six samples were selected from a large matrix of materials to perform atom probe tomography (APT) to look at formation of high dose phases. The nature and formation behavior of these phases is discussed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Additively Manufactured, Net Shape Powder Metallurgy Cans for Valves Used in Energy Production

Additive manufacturing (AM) has the potential to enable a paradigm shift in fabricating complex net shape components with yields over 90%, significantly increasing productivity, decreasing energy consumption during manufacturing and improving downstream energy efficiency. ORNL has developed a technology for producing large-scale additively manufactured polymer matrix composite components at deposition rates on the order of 100 lbs. per hour. This project utilized tools, dies and molds made from this technology to enable the net shape forming of cans for the powder metallurgy (PM) manufacturing of valves used in energy production plants. This approach has the potential to develop affordable valves with superior performance to castings. It will also lead to increased strength values, decreased wall thickness size, and the potential for higher yields (less machining). This project is critical for evaluating new methodologies for the fabrication of additively manufactured tooling, molds and dies that could be used across multiple industries. In the first phase of this project, a new methodology of creating a Powder Metallurgy and Hot Isostatic Pressing (PM-HIP) container by hydroforming sheet metal over additively manufactured (AM) dies was evaluated. The goal in this stage of development was to evaluate some of the new polymer matrix composite materials designed for deposition on large scale additive manufacturing systems as candidates for hydroforming steel and aluminum sheet to make thin gauge net shape components. In order to meet this objective, most research was performed on subscale tools in order to evaluate the processing pressures, material options, and gauge thicknesses most relevant to this approach. In addition, full scale AM tools (30% over final component geometry) were produced to demonstrate scalability, but were not used in testing. The first phase of this project has proven this concept has merit, but future studies are required to address minor tool failures that occurred in phase one due to geometry, cost of the process over other techniques, and demonstration of a full-scale tool that could then be used in (HIP). Lastly, this project provides the PM community a new approach in using hydroforming for the manufacturing of cans, a process that was not highly utilized for this purpose previously.

42 ENGINEERING↗

Fuel/Basket Degradation and Waste Package Pressure Effects Modeling (Progress Report)

Progress is reported on development and testing of the Fuel/Basket Degradation Model, and the Waste Package Breach Model. The work follows on reported FY19 model development (SNL-ICG 2019). Modeling has addressed questions framed in the deliverable description: 1) how fuel/basket damage, including from seismic ground motion, could impact reactivity; 2) whether dynamic degradation processes (e.g., caused by seismic ground motion) should be targets for further model development; and 3) what are the key model parameters and how do they affect the likelihood and energy of criticality events. For basket structure made from aluminum-based metal-matrix composite material, basket collapse would coincide with loss of neutron absorbers, and would occur within a few hundred years after waste package breach. Degradation models discussed in this report have thus far focused on a generic 32-PWR (pressurized water reactor fuel) basket with aluminum-based plates

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Summary of LWRS Research in Addressing RPV Research Gaps in NRC EMDA Report

Reactor Pressure Vessels (RPVs) are critical components in nuclear reactors, housing the reactor core and coolant under extreme conditions of temperature, pressure, and radiation. These harsh environments contribute to the degradation of RPV materials over time, presenting challenges for extending reactor operations beyond their original design lifespans. The NRC Expanded Materials Degradation Assessment (EMDA) report volume 3 have been instrumental in guiding research to support extending the operational life of light water reactors (LWRs) up to 80 years. It provides a comprehensive framework to address technical challenges related to aging and degradation mechanisms in RPVs. The LWRS program has played a key role in advancing this research, supporting projects such as the UCSB ATR-2 Experiment, material testing from Zion and Palisades reactors, and the development of advanced mini-compact tension testing techniques. These efforts have been crucial in identifying and addressing gaps in our understanding of RPV aging, contributing to the successful subsequent license renewals of eight LWR units in the U.S. The EMDA report volume 3, built on the Phenomena Identification and Ranking Table (PIRT) analysis from earlier versions of the EPRI Materials Degradation Matrix (MDM) and Issue Management Tables (IMTs), provides a detailed assessment of RPV degradation mechanisms. However, as EPRI has updated the MDM and IMT, it is important to revisit research priorities and methodologies to reflect these changes. The revised MDM and IMT may introduce new factors affecting long-term RPV performance and safety, highlighting the need for continued research and updated guidance to ensure the reliable and safe operation of reactors beyond 80 years.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Enhancing CMC Temperature Performance in High Hydrogen Environments using Field Assisted Sintering Technology

This final report summarizes the developments in field assisted sintering technology (FAST) for rapid fabrication of ceramic matrix composite (CMC) materials with integrated environmental barrier coatings (EBCs), as well as their performance in a representative gas turbine combustor environment including stagnant flame zones, and high velocity product zones. CMCs are a possible high temperature tolerant material system for gas turbine engines, which are currently the dominant source of electric power production and the primary source of aircraft propulsion. However, CMCs are costly and time-consuming (on the order of weeks to months) to fabricate, and CMCs based on silicon carbide (SiC) ceramics are susceptible to water vapor degradation requiring the use of specialized EBCs. The manufacturing technique known as FAST can create consolidated parts in as little as a few hours using high pressure and temperature, and may be useful to integrate EBCs into CMCs directly during consolidation.

08 HYDROGEN↗