Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Nonlinear current-voltage behavior of the isolated resistive switching filamentary channels in CuC nanolayer

Copper-doped amorphous carbon film was prepared by radio frequency reactive magnetron sputtering and their resistive switching behaviors were studied under a conductive atomic force microscope (cAFM). The repetitive scanning over the same area using cAFM with various bias voltages revealed that most of the isolated conductive paths were involved in resistive switching with asymmetric nonlinear I-V characteristics. The observed I-V behavior of nanoscale filamentary channels indicates that electron transfer mechanism of resistive switching filamentary channel in Pt/CuC/Pt is a tunneling between Cu filamentary channel and electrode through the solid electrolyte rather than conduction through fully connected Cu filamentary channel.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photoluminescence Characterization of ZnO Thin Films Grown by RF- Sputtering

This article presents photoluminescence (PL) characterization of ZnO thin films deposited by radio-frequency magnetron sputtering method on sapphire and n-type Si (100) substrates. PL measurements were carried out at room temperature to investigate the energy band gaps and optical quality of the ZnO thin films. In order to draw a specific picture of surface morphology of ZnO thin films, atomic force microscope images were taken. All the results were compared to the results obtained from the bulk ZnO sample. The results revealed that the energy band gap of ZnO thin films grown on n-type Si (100) is higher than ZnO on sapphire. However, energy band gap of bulk ZnO is higher compared to both ZnO on n-type Si (100) and sapphire (Al{sub 2}O{sub 3}). This is probably due to the crystalline quality because good crystallinity increases the radiation recombination and hence increase the intensity of the NBE emission.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of hydrogenation on transport and magnetic properties in homogeneous amorphous Mn{sub x}Ge{sub 1-x}:H films

Homogeneous amorphous Mn{sub x}Ge{sub 1-x}:H films were synthesized under thermal nonequilibrium condition by magnetron co-sputtering technology with hydrogen in Ar atmosphere. Compared to the Mn{sub x}Ge{sub 1-x} films without hydrogen, the Mn{sub x}Ge{sub 1-x}:H films with hydrogen show higher concentration of hole carriers, larger conductivity, and higher saturation magnetization. Moreover, it was found that the anomalous Hall resistivity is proportional to the perpendicular magnetization. These electrical and magnetic properties indicate that the ferromagnetism of the Mn{sub x}Ge{sub 1-x}:H films is intrinsic ferromagnetism mediated by the spin-polarized hole carriers.

36 MATERIALS SCIENCE↗

950 keV X-Band Linac For Material Recognition Using Two-Fold Scintillator Detector As A Concept Of Dual-Energy X-Ray System

One of the advantages of applying X-band linear accelerator (Linac) is the compact size of the whole system. That shows us the possibility of on-site system such as the custom inspection system in an airport. As X-ray source, we have developed X-band Linac and achieved maximum X-ray energy 950 keV using the low power magnetron (250 kW) in 2 {mu}s pulse length. The whole size of the Linac system is 1x1x1 m{sup 3}. That is realized by introducing X-band system. In addition, we have designed two-fold scintillator detector in dual energy X-ray concept. Monte carlo N-particle transport (MCNP) code was used to make up sensor part of the design with two scintillators, CsI and CdWO4. The custom inspection system is composed of two equipments: 950 keV X-band Linac and two-fold scintillator and they are operated simulating real situation such as baggage check in an airport. We will show you the results of experiment which was performed with metal samples: iron and lead as targets in several conditions.

43 PARTICLE ACCELERATORS↗

Formation and Characterization of Silicon Self-assembled Nanodots

Silicon self-assembled quantum dots have been successfully prepared on corning glass (7059) substrate. The samples were fabricated using the common technique RF magnetron sputtering system depend on plasma excitation at varying growth parameters and high temperature of more than 500 deg. C. The measurements of average dots size estimated to be 36 nm is confirmed by using AFM. The PL peak located at 570 nm, informed band gap energy = 2.10 eV larger than bulk material band gap, that confirmed the miniaturized of the dots. To measure the Silicon atomic% deposit on corning glass (7059) substrate EDX has been used.

36 MATERIALS SCIENCE↗

Dielectric properties of aluminum silver alloy thin films in optical frequency range

The dielectric properties of direct current (dc) magnetron sputtering aluminum silver alloy films in optical frequency have been quantitatively studied by variable angle spectroscopic ellipsometry. The structure and surface topography of the alloy films were characterized using scanning probe microscopy and x-ray diffraction. The Drude-Lorentz model was used to simulate the dielectric function of Al-Ag alloy films. Meanwhile, the effective medium theory has been utilized for the treatment of surface roughness. We found that the interband transition around 1.5 eV can be shifted through a variable annealing temperature and a changeable silver percentage of Al-Ag alloys.

36 MATERIALS SCIENCE↗

Simulation and experimental study on compositional evolution of Li-Co in LiCoO{sub 2} thin films during sputter deposition

The compositional evolution in sputter deposited LiCoO{sub 2} thin films is influenced by process parameters involved during deposition. The electrochemical performance of these films strongly depends on their microstructure, preferential orientation and stoichiometry. The transport process of sputtered Li and Co atoms from the LiCoO{sub 2} target to the substrate, through Ar plasma in a planar magnetron configuration, was investigated based on the Monte Carlo technique. The effect of sputtering gas pressure and the substrate-target distance (d{sub st}) on Li/Co ratio, as well as, energy and angular distribution of sputtered atoms on the substrate were examined. Stable Li/Co ratios have been obtained at 5 Pa pressure and d{sub st} in the range 5-11 cm. The kinetic energy and incident angular distribution of Li and Co atoms reaching the substrate have been found to be dependent on sputtering pressure. Simulations were extended to predict compositional variations in films prepared at various process conditions. These results were compared with the composition of films determined experimentally using x-ray photoelectron spectroscopy (XPS). Li/Co ratio calculated using XPS was in moderate agreement with that of the simulated value. The measured film thickness followed the same trend as predicted by simulation. These studies are shown to be useful in understanding the complexities in multicomponent sputtering.

36 MATERIALS SCIENCE↗

Epitaxy, strain, and composition effects on metal-insulator transition characteristics of SmNiO{sub 3} thin films

SmNiO{sub 3} (SNO) thin films were deposited on LaAlO{sub 3} (LAO), SrTiO{sub 3}, SrLaAlO{sub 4}, Si, and Al{sub 2}O{sub 3} (sapphire) substrates by RF magnetron sputtering and studies were conducted to understand how film structure and composition influence the insulator-metal transition properties. It is observed that the compressive strain induces the insulator to metal transition (MIT), while tensile strain suppresses it. In the case of non-epitaxial films, semiconducting behavior is obtained on sapphire over a broad temperature range, while on heavily-doped Si substrate; an MIT is seen in out-of-plane resistance measurement. In addition, thickness dependence on the resistance behavior and nickel oxidation state has been examined for epitaxial SNO films on LAO substrates. Fine control of the MIT by modifications to the mismatch strain and thickness provides insights to enhance the performance and the functionality of these films for emerging electron devices.

36 MATERIALS SCIENCE↗

p-type conduction induced by N-doping in {alpha}-Fe{sub 2}O{sub 3}

A p-type N-doped {alpha}-Fe{sub 2}O{sub 3} was developed by magnetron sputtering of a Fe{sub 2}O{sub 3} target in a plasma containing N{sub 2} and Ar followed by postannealing. Photoelectrochemical measurement under visible light irradiation (>410 nm) showed that N-Fe{sub 2}O{sub 3} exhibits a typical cathodic photocurrent originated from the p-type conduction. X-ray photoemission spectroscopy indicated that the atomic N incorporated substitutionally at O sites was responsible for the p-type conduction. The concentration of acceptors was very close to that for Zn-doped Fe{sub 2}O{sub 3}, a typical p-type {alpha}-Fe{sub 2}O{sub 3}. This finding would stimulate further research on p-type Fe{sub 2}O{sub 3} for solar fuel generation, etc.

36 MATERIALS SCIENCE↗

Epitaxial growth of Heusler alloy Co{sub 2}MnSi/MgO heterostructures on Ge(001) substrates

We prepared Heusler alloy Co{sub 2}MnSi/MgO heterostructures on single-crystal Ge(001) substrates through magnetron sputtering for Co{sub 2}MnSi and electron beam evaporation for MgO as a promising candidate for future generation spin-based functional devices. Structural investigations showed that the Co{sub 2}MnSi/MgO heterostructure was grown epitaxially on a Ge(001) substrate with extremely smooth and abrupt interfaces and showed the L2{sub 1} structure for the Co{sub 2}MnSi film. Furthermore, a sufficiently high saturation magnetization ({mu}{sub s}) value of 5.1 {mu}{sub B}/f.u. at 10 K, which is close to the theoretically predicted {mu}{sub s} of 5.0 {mu}{sub B}/f.u. for half-metallic Co{sub 2}MnSi, was obtained for prepared Co{sub 2}MnSi films.

36 MATERIALS SCIENCE↗

Twin symmetry texture of energetically condensed niobium thin films on sapphire substrate (a-plane Al 2 O 3 )

An energetic condensation technique, cathodic arc discharge deposition, is used to growepitaxialNiobium(Nb)thin films on a-plane sapphire (hexagonal-closed-packed Al 2 O 3 ) at moderate substrate heating temperature (<400 °C). The epitaxial Nb(110)/Al 2 O 3 (1,1,-2,0) thin films reached a maximum residual resistance ratio (RRR) value 214, despite using a reactor-grade Nbcathode source whose RRR was only 30. The measurements suggest that the film’s density of impurities and structural defects are lower when compared to Nb films produced by other techniques, such as magnetron sputtering, e-beam evaporation or molecular-beam-epitaxy. At lower substrate temperature, textured polycrystalline Nbthin films were created, and the films might have twin symmetry grains with {110} orientations in-plane. The texture was revealed by x-ray diffraction pole figures. The twin symmetry might be caused by a combination effect of the Nb/Al 2 O 3 three-dimensional epitaxial relationship (“3D-Registry” Claassen’s nomenclature) and the “Volmer-Weber” (Island) growth model. However, pole figures obtained by electron backscattering diffraction (EBSD) found no twin symmetry on the thin films’ topmost surface (~50 nm in depth). The EBSD pole figures showed only one Nb{110} crystal plane orientation. Finally, a possible mechanism is suggested to explain the differences between the bulk (XRD) and surface (EBSD) pole figures.

36 MATERIALS SCIENCE↗

Epitaxial BaTiO{sub 3}(100) films on Pt(100): A low-energy electron diffraction, scanning tunneling microscopy, and x-ray photoelectron spectroscopy study

The growth of epitaxial ultrathin BaTiO{sub 3} films on a Pt(100) substrate has been studied by scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and x-ray photoelectron spectroscopy (XPS). The films have been prepared by radio-frequency-assisted magnetron sputter deposition at room temperature and develop a long-range order upon annealing at 900 K in O{sub 2}. By adjusting the Ar and O{sub 2} partial pressures of the sputter gas, the stoichiometry was tuned to match that of a BaTiO{sub 3}(100) single crystal as determined by XPS. STM reveals the growth of continuous BaTiO{sub 3} films with unit cell high islands on top. With LEED already for monolayer thicknesses, the formation of a BaTiO{sub 3}(100)-(1 x 1) structure has been observed. Films of 2-3 unit cell thickness show a brilliant (1 x 1) LEED pattern for which an extended set of LEED I-V data has been acquired. At temperatures above 1050 K the BaTiO{sub 3} thin film starts to decay by formation of vacancy islands. In addition (4 x 4) and (3 x 3) surface reconstructions develop upon prolonged heating.

36 MATERIALS SCIENCE↗

Theoretical study on a 0.6 THz third harmonic gyrotron

A theoretical study on a 0.6 THz third harmonic TE{sub 37} mode gyrotron oscillator is reported in this paper in order to develop a compact, reliable, and high power terahertz radiation source. An output power of 4 kW can be generated in the TE{sub 37} mode (0.6 THz) at a resonant magnetic field of 7.86 T by the gyrotron oscillator operating at 55 kV/2 A with an electron beam radius of 0.32 mm. A magnetron injection gun (MIG) with high compression ratio has been designed. The simulation results of MIG show that the velocity ratio {alpha} is 1.37, and the perpendicular velocity spread and parallel velocity spread are 6.1% and 8.9%, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomistic surface erosion and thin film growth modelled over realistic time scales

We present results of atomistic modelling of surface growth and sputtering using a multi-time scale molecular dynamics-on-the-fly kinetic Monte Carlo scheme which allows simulations to be carried out over realistic experimental times. The method uses molecular dynamics to model the fast processes and then calculates the diffusion barriers for the slow processes on-the-fly, without any preconceptions about what transitions might occur. The method is applied to the growth of metal and oxide materials at impact energies typical for both vapour deposition and magnetron sputtering. The method can be used to explain growth processes, such as the filling of vacancies and the formation of stacking faults. By tuning the variable experimental parameters on the computer, a parameter set for optimum crystalline growth can be determined. The method can also be used to model sputtering where the particle interactions with the surface occur at a higher energy. It is shown how a steady state can arise in which interstitial clusters are continuously being formed below the surface during an atom impact event which also recombine or diffuse to the surface between impact events. For fcc metals the near surface region remains basically crystalline during the erosion process with a pitted topography which soon attains a steady state roughness.

36 MATERIALS SCIENCE↗

Circular multilayer zone plate for high-energy x-ray nano-imaging

A circular multilayer zone plate (MZP) was fabricated and its focusing performance was evaluated using 20-keV x-rays. MoSi{sub 2} and Si layers were alternately deposited by DC magnetron sputtering on a wire core; all the interfaces satisfied the Fresnel zone condition. The measured line spread function was converted to a point spread function by tomographic reconstruction. The results suggest that the MZP has the potential to realize the diffraction-limited resolving power, which is calculated to be 35 nm using the diffraction integral. Furthermore, scanning transmission microscopy using the MZP could resolve a 50-nm line-and-space pattern.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermochromic effect at room temperature of Sm{sub 0.5}Ca{sub 0.5}MnO{sub 3} thin films

Sm{sub 0.5}Ca{sub 0.5}MnO{sub 3} thermochromic thin films were synthesized using dc reactive magnetron co-sputtering and subsequent annealing in air. The film structure was studied by x-ray diffraction analysis. To validate the thermochromic potentiality of Sm{sub 0.5}Ca{sub 0.5}MnO{sub 3}, electrical resistivity and infrared transmittance spectra were recorded for temperatures ranging from 77 K to 420 K. The temperature dependence of the optical band gap was estimated in the near infrared range. Upon heating, the optical transmission decreases in the infrared domain showing a thermochromic effect over a wide wavelength range at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial growth of Ti{sub 3}SiC{sub 2} thin films with basal planes parallel or orthogonal to the surface on {alpha}-SiC

The growth of Ti{sub 3}SiC{sub 2} thin films were studied onto {alpha}-SiC substrates differently oriented by thermal annealing of TiAl layers deposited by magnetron sputtering. For any substrate's orientation, transmission electron microscopy coupled with x-ray diffraction showed the coherent epitaxial growth of Ti{sub 3}SiC{sub 2} films along basal planes of SiC. Specifically for the (1120) 4H-SiC, Ti{sub 3}SiC{sub 2} basal planes are found to be orthogonal to the surface. The continuous or textured nature of Ti{sub 3}SiC{sub 2} films does not depend of the SiC stacking sequence and is explained by a step-flow mechanism of growth mode. The ohmic character of the contact was confirmed by current-voltage measurements.

36 MATERIALS SCIENCE↗

Epitaxial Ni{sub 3}FeN thin films: A candidate for spintronic devices and magnetic sensors

A new type of epitaxial ferromagnetic nitride (Ni{sub 3} Fe N = permalloy nitride = 'PyN') compound films were grown on Al{sub 2}O{sub 3}(1120) substrates using reactive triode magnetron sputtering. The results of electron back-scattering diffraction and x-ray diffraction techniques indicate a high quality epitaxial crystalline structure with growth normal of (100). Magnetization measurements of epitaxial PyN films revealed several unique results. (1) A textbook square hysteresis loop that suggest existence of single magnetic domain in these films. (2) A coercive field is tunable from a few mOe up to a few Oe by changing the film thickness. (3) A magnetization that switches (rotate) over a very small field range of {delta}H{sub C} {<=} 0.05 Oe, independent of the film thickness. This small {delta}H indicates a very large resistive sensitivity ({delta}R/{delta}H) of the epitaxial PyN. (4) The epitaxial PyN thermal cycling through several cycles between '2 and 800 K' (-271 Degree-Sign C to +527 Degree-Sign C) shows much less degradation only about 2-5% compared to 40% degradation of a simple Py film. Four-probe transport measurements give an anisotropic magnetoresistance of Almost-Equal-To 6%, sufficiently higher than other known ferromagnetic materials. These interesting properties are ideal for a variety of spintronic devices and magnetic sensors.

36 MATERIALS SCIENCE↗