Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Interface properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Performance of High Temperature Operational Amplifier, Type LM2904WH, under Extreme Temperatures

Operation of electronic parts and circuits under extreme temperatures is anticipated in NASA space exploration missions as well as terrestrial applications. Exposure of electronics to extreme temperatures and wide-range thermal swings greatly affects their performance via induced changes in the semiconductor material properties, packaging and interconnects, or due to incompatibility issues between interfaces that result from thermal expansion/contraction mismatch. Electronics that are designed to withstand operation and perform efficiently in extreme temperatures would mitigate risks for failure due to thermal stresses and, therefore, improve system reliability. In addition, they contribute to reducing system size and weight, simplifying its design, and reducing development cost through the elimination of otherwise required thermal control elements for proper ambient operation. A large DC voltage gain (100 dB) operational amplifier with a maximum junction temperature of 150 C was recently introduced by STMicroelectronics [1]. This LM2904WH chip comes in a plastic package and is designed specifically for automotive and industrial control systems. It operates from a single power supply over a wide range of voltages, and it consists of two independent, high gain, internally frequency compensated operational amplifiers. Table I shows some of the device manufacturer s specifications.

Patterson, Richard↗
DOE OSTI2022

Insight of BaCe 0.5 Fe 0.5 O 3– δ twin perovskite oxide composite for solid oxide electrochemical cells

One-pot synthesized twin perovskite oxide composite of BaCe 0.5 Fe 0.5 O 3–δ (BCF), comprising cubic and orthorhombic perovskite phases, shows triple-conducting properties for promising solid oxide electrochemical cells. Phase composition evolution of BCF under various conditions was systematically investigated, revealing that the cubic perovskite phase could be fully/partially reduced into the orthorhombic phase under certain conditions. The reduction happened between the two phases at the interface, leading to the microstructure change. As a result, the corresponding apparent conducting properties also changed due to the difference between predominant conduction properties for each phase. Based on the revealed phase composition, microstructure, and electrochemical properties changes, a deep understanding of BCF's application in different conditions (oxidizing atmospheres, reducing/oxidizing gradients, cathodic conditions, and anodic conditions) was achieved. Triple-conducting property (H + /O 2– /e – ), fast open-circuit voltage response (~16–~470 mV) for gradients change, and improved single-cell performance (~31% lower polarization resistance at 600°C) were comprehensively demonstrated. Besides, the performance was analyzed under anodic conditions, which showed that the microstructure and phase change significantly affected the anodic behavior.

08 HYDROGEN↗
NASA NTRS1988

The crack problem in bonded nonhomogeneous materials

The plane elasticity problem for two bonded half planes containing a crack perpendicular to the interface was considered. The effect of very steep variations in the material properties near the diffusion plane on the singular behavior of the stresses and stress intensity factors were studied. The two materials were thus, assumed to have the shear moduli mu(o) and mu(o) exp (Beta x), x=0 being the diffusion plane. Of particular interest was the examination of the nature of stress singularity near a crack tip terminating at the interface where the shear modulus has a discontinuous derivative. The results show that, unlike the crack problem in piecewise homogeneous materials for which the singularity is of the form r/alpha, 0 less than alpha less than 1, in this problem the stresses have a standard square-root singularity regardless of the location of the crack tip. The nonhomogeneity constant Beta has, however, considerable influence on the stress intensity factors.

Erdogan, Fazil↗
NASA NTRS1991

The crack problem in bonded nonhomogeneous materials

The plane elasticity problem for two bonded half planes containing a crack perpendicular to the interface was considered. The effect of very steep variations in the material properties near the diffusion plane on the singular behavior of the stresses and stress intensity factors were studied. The two materials were thus, assumed to have the shear moduli mu(o) and mu(o) exp (Beta x), x=0 being the diffusion plane. Of particular interest was the examination of the nature of stress singularity near a crack tip termination at the interface where the shear modulus has a discontinuous derivative. The results show that, unlike the crack problem in piecewise homogeneous materials for which the singularity is of the form r/alpha, 0 less than alpha less than 1, in this problem the stresses have a standard square-root singularity regardless of the location of the crack tip. The nonhomogeneity constant Beta has, however, considerable influence on the stress intensity factors.

Erdogan, F.↗
DOE OSTI2023

Neural Network Enhanced RKPM for Electrochemical-Mechanical Coupled Damage Modeling of Energy Storage Materials

Energy storage materials undergo significant charge cycling, which makes understanding their reliability and durability fundamental in predicting performance and service life. Strong electrochemical-mechanical coupling and highly anisotropic material properties contribute to the formation and propagation of micro-cracking, largely along material interfaces and grain boundaries. For Li-ion batteries, for example, lithium moving between electrodes during charging and discharging process causes expansion and contraction of grains, and the strongly anisotropic and nonlinearly [Li]-dependent grain material properties can cause grains to expand into and contract away from each other, leading to chemo-mechanical cracking. In the first part of this work, a RKPM based computational framework for solving the coupled solid-phase lithium conservation with Fickian diffusion and the lithium concentration dependent anisotropic mechanical problem subjected to a highly nonlinear Butler-Volmer boundary condition is introduced. The choice of RKPM completeness conditions for lithium concentration and mechanical deformation fields, and the variational consistency condition for the domain integration of the coupled problem is first determined. In the second part of this work, a neural network-enhanced reproducing kernel particle method (NN-RKPM) [1] is leveraged to accurately capture damage and crack propagation throughout the material, by learning the location, orientation, and sharpness of discontinuity while allowing for a coarser nodal distribution than that is necessary for capturing sharp solution transitions using traditional mesh-based methods. NN-RKPM is used to inform how crack opening and closure in turn affect the coupled chemical equations and material microstructure.

damage modeling↗
DOE OSTI2025

Revealing the Origin and Nature of the Buried Metal‐Substrate Interface Layer in Ta/Sapphire Superconducting Films

Abstract Despite constituting a smaller fraction of the qubit's electromagnetic mode, surfaces and interfaces can exert significant influence as sources of high‐loss tangents, which brings forward the need to reveal properties of these extended defects and identify routes to their control. Here, we examine the structure and composition of the metal‐substrate interfacial layer that exists in Ta/sapphire‐based superconducting films. Synchrotron‐based X‐ray reflectivity measurements of Ta films, commonly used in these qubits, reveal an unexplored interface layer at the metal‐substrate interface. Scanning transmission electron microscopy and core‐level electron energy loss spectroscopy identified an intermixing layer (≈0.65 ± 0.05 nm) at the metal‐substrate interface containing Al, O, and Ta atoms. Density functional theory modeling reveals that the structure and properties of the Ta/sapphire heterojunctions are determined by the oxygen content on the sapphire surface prior to Ta deposition for two atomic terminations of sapphire. Using a multimodal approach, we gained deeper insights into the interface layer between the metal and substrate, which suggests that the orientation of deposited Ta films depend on the surface termination of sapphire. The observed elemental intermixing at the metal‐substrate interface influences the thermodynamic stability and electronic behavior of the film, which may also affect qubit performance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Polyolefin blends with co-continuous architectures enabled by dynamic covalent crosslinking

Blending polymers produces brittle materials due to macrophase separation and poor interfacial adhesion, which is exemplified by mixtures of polyolefins. This presents a formidable challenge for the mechanical recycling of mixed plastic waste. Here, we demonstrate that dynamic covalent crosslinking of immiscible polyolefin blends creates macrophase separated co-continuous architectures, yet they display excellent mechanical properties, which challenges the conventional wisdom regarding morphology-property relationships in polymer blend compatibilization. We find that the position and orientation of dynamic crosslinks and their influence on crystallinity are key to understanding the structure-morphology-property relationships. In particular, high-resolution microscopy imaging reveals alignment of crystallite planes with strong orientational preference, particularly at polymer-polymer interfaces, which contribute to material performance. We further demonstrate that changes in crosslinker density and valency allow the properties of binary and ternary polyolefin blends to be tuned in a modular fashion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thermal conductance of interfaces between titanium nitride and group IV semiconductors at high temperatures

Measuring the temperature dependence of material properties is a standard method for better understanding the microscopic origins for that property. Surprisingly, only a few experimental studies of thermal boundary conductance at high temperatures exist. This lack of high temperature data makes it difficult to evaluate competing theories for how inelastic processes contribute to thermal conductance. To address this, we report time domain thermoreflectance measurements of the thermal boundary conductance for TiN on diamond, silicon-carbide, silicon, and germanium between 120 and 1000 K. In all systems, the interface conductance increases monotonically without stagnating at higher temperatures. For TiN/SiC interfaces, G ranges from 330 to 1000 MW/m2-K, with a room temperature conductance of 750 MW/m2-K. The interface conductance for TiN/diamond ranges from 140 to 950 MW/m2-K. Notably, for all four interfacial systems, the conductance continues to increase with temperature even after all phonon modes in the vibrationally soft material are thermally excited. This observation suggests that inelastic processes are significant contributors to the thermal conductance in all four interfacial systems, regardless of whether the materials forming the interface are vibrationally similar or dissimilar. Our study fills a notable gap in the literature for how interfacial conductance evolves at high temperatures and tests burgeoning theories for the role of inelastic processes in interfacial thermal transport.

Physics↗
DOE OSTI2020

Water-Dependent Blending of Pectin Films: The Mechanics of Conjoined Biopolymers

Biodegradable pectin polymers have been recommended for a variety of biomedical applications, ranging from the delivery of oral drugs to the repair of injured visceral organs. A promising approach to regulate pectin biostability is the blending of pectin films. To investigate the development of conjoined films, we examined the physical properties of high-methoxyl pectin polymer-polymer (homopolymer) interactions at the adhesive interface. Pectin polymers were tested in glass phase (10–13% w/w water content) and gel phase (38–41% w/w water content). The tensile strength of polymer-polymer adhesion was measured after variable development time and compressive force. Regardless of pretest parameters, the adhesive strength of two glass phase films was negligible. In contrast, adhesion testing of two gel phase films resulted in significant tensile adhesion strength (p < 0.01). Adhesion was also observed between glass phase and gel phase films—likely reflecting the diffusion of water from the gel phase to the glass phase films. In studies of the interaction between two gel phase films, the polymer-polymer adhesive strength increased linearly with increasing compressive force (range 10–80 N) (R 2 = 0.956). In contrast, adhesive strength increased logarithmically with time (range 10–10,000 s) (R 2 = 0.913); most of the adhesive strength was observed within minutes of contact. Fracture mechanics demonstrated that the adhesion of two gel phase films resulted in a conjoined film with distinctive physical properties including increased extensibility, decreased stiffness and a 30% increase in the work of cohesion relative to native polymers (p < 0.01). Scanning electron microscopy of the conjoined films demonstrated cross-grain adhesion at the interface between the adhesive homopolymers. These structural and functional data suggest that blended pectin films have emergent physical properties resulting from the cross-grain intermingling of interfacial pectin chains.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

Advanced Materials for Energy-Water Systems: The Central Role of Water/Solid Interfaces in Adsorption, Reactivity, and Transport

The structure, chemistry, and charge of interfaces between materials and aqueous fluids play a central role in determining properties and performance of numerous water systems. Sensors, membranes, sorbents, and heterogeneous catalysts almost uniformly rely on specific interactions between their surfaces and components dissolved or suspended in the water-and often the water molecules themselves-to detect and mitigate contaminants. Deleterious processes in these systems such as fouling, scaling (inorganic deposits), and corrosion are also governed by interfacial phenomena. Despite the importance of these interfaces, much remains to be learned about their multiscale interactions. Developing a deeper understanding of the molecular- and mesoscale phenomena at water/solid interfaces will be essential to driving innovation to address grand challenges in supplying sufficient fit-for-purpose water in the future. In this Review, we examine the current state of knowledge surrounding adsorption, reactivity, and transport in several key classes of water/solid interfaces, drawing on a synergistic combination of theory, simulation, and experiments, and finally, provide an outlook for prioritizing strategic research directions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Feature engineering descriptors, transforms, and machine learning for grain boundaries and variable-sized atom clusters

Abstract Obtaining microscopic structure-property relationships for grain boundaries is challenging due to their complex atomic structures. Recent efforts use machine learning to derive these relationships, but the way the atomic grain boundary structure is represented can have a significant impact on the predictions. Key steps for property prediction common to grain boundaries and other variable-sized atom clustered structures include: (1) describing the atomic structure as a feature matrix, (2) transforming the variable-sized feature matrix to a fixed length common to all structures, and (3) applying a machine learning algorithm to predict properties from the transformed matrices. We examine how these steps and different combinations of engineered features impact the accuracy of grain boundary energy predictions using a database of over 7000 grain boundaries. Additionally, we assess how different engineered features support interpretability, offering insights into the physics of the structure-property relationships.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Nanoscale viscosity of confined polyethylene oxide

Complex fluids near interfaces or confined within nanoscale volumes can exhibit substantial shifts in physical properties compared to bulk, including glass transition temperature, phase separation, and crystallization. Because studies of these effects typically use thin film samples with one dimension of confinement, it is generally unclear how more extreme spatial confinement may influence these properties. In this work, we used x-ray photon correlation spectroscopy and gold nanoprobes to characterize polyethylene oxide confined by nanostructured gratings (<100nm width) and measured the viscosity in this nanoconfinement regime to be ~500 times the bulk viscosity. Here, this enhanced viscosity occurs even when the scale of confinement is several times the polymer's radius of gyration, consistent with previous reports of polymer viscosity near flat interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Modified Dirac Fermions in the Crystalline Xenon and Graphene Moiré Heterostructure

Abstract The interface between two‐dimensional (2D) crystals often forms a Moiré superstructure that imposes a new periodicity, which is a key element in realizing complex electronic phases as evidenced in twisted bilayer graphene. Acombined angle‐resolved photoemission spectroscopy measurements and first‐principles calculations reveal the formation of a Moiré superstructure between a 2D Dirac semi‐metallic crystal, graphene, and a 2D insulating crystal of noble gas, xenon. Incommensurate diffraction pattern and folded Dirac cones around the Brillouin zone center imply the formation of hexagonal crystalline array of xenon atoms. The velocity of Dirac fermions increases upon the formation of the 2D xenon crystal on top of graphene due to the enhanced dielectric screening by the xenon over‐layer. These findings not only provide a novel method to produce a Moiré superstructure from the adsorption of noble gas on 2D materials, but also to control the physical properties of graphene by the formation of a graphene‐noble gas interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

A Condensed Constrained Nonconforming Mortar-Based Approach for Preconditioning Finite Element Discretization Problems

This paper presents and studies an approach for constructing auxiliary space preconditioners for finite element problems using a constrained nonconforming reformulation that is based on a proposed modified version of the mortar method. The well-known mortar finite element discretization method is modified to admit a local structure, providing an element-by-element or subdomain-by-subdomain assembly property. This is achieved via the introduction of additional trace finite element spaces and degrees of freedom (unknowns) associated with the interfaces between adjacent elements or subdomains. The resulting nonconforming formulation and a reduced-via-static-condensation Schur complement form on the interfaces are used in the construction of auxiliary space preconditioners for a given conforming finite element discretization problem. Overall, the properties of these preconditioners are studied and their performance is illustrated on model second order scalar elliptic problems utilizing high order elements.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Real-time Characterization of the Fine Structure and Dynamics of an Electrical Double Layer at Electrode-electrolyte Interfaces

The chemisorption of species from supporting electrolytes on electrode surfaces is ubiquitous in electrochemical systems and affects the dynamics and mechanism of various electrochemical reactions. The understanding of chemical structure and property of the resulting electrical double layer is vital but limited. In this work, we operando probed the electrochemical interface between a gold electrode surface and a common supporting electrolyte, phosphate buffer, using our newly developed in situ liquid secondary ion mass spectrometry. We surprisingly found that on the positively charged gold electrode surface sodium cations were anchored in the stern layer in a partially dehydrated form by formation of compact ion pairs with the accumulated phosphate anions. The resulting strong and dense adsorption phase was further revealed to retard the electro-oxidation reaction of ascorbate. This finding addressed one major gap in the fundamental science of electrode-electrolyte interfaces that where and how the cations reside in the double layer to impose effects on electrochemical reactions, providing insights into engineering of better electrode-electrolyte interfaces in electrochemical processes.

Zhang, Yanyan↗
DOE OSTI2024

Solid-state polymer-particle hybrid electrolytes: Structure and electrochemical properties

Solid-state electrolytes (SSEs) are challenged by complex interfacial chemistry and poor ion transport through the interfaces they form with battery electrodes. Here, we investigate a class of SSE composed of micrometer-sized lithium oxide (Li 2 O) particles dispersed in a polymerizable 1,3-dioxolane (DOL) liquid. Ring-opening polymerization (ROP) of the DOL by Lewis acid salts inside a battery cell produces polymer-inorganic hybrid electrolytes with gradient properties on both the particle and battery cell length scales. These electrolytes sustain stable charge-discharge behavior in Li||NCM811 and anode-free Cu||NCM811 electrochemical cells. On the particle length scale, Li 2 O retards ROP, facilitating efficient ion transport in a fluid-like region near the particle surface. On battery cell length scales, gravity-assisted settling creates physical and electrochemical gradients in the hybrid electrolytes. By means of electrochemical and spectroscopic analyses, we find that Li 2 O particles participate in a reversible redox reaction that increases the effective CE in anode-free cells to values approaching 100%, enhancing battery cycle life.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The complexity of { 11 2 ¯ 1 } twin interface structure and energetics in HCP materials

Here, the quest for a deeper understanding of the mechanical properties of HCP alloys has been an ongoing effort. Due to the lack of a sufficient number of slip systems, twin nucleation and migration originate as a substantial plastic deformation mechanism in HCP metals. The paper uncovers the energetics and atomistic mechanism of the {$11\overline{2}1$} < $11\overline{2}6$ > which is one of the most prominent twin modes in HCP materials that has not been fully understood. In view of corrugated {$11\overline{2}1$} interfaces, the positioning of lattice/motif atoms needs to be clarified. First, we establish the initial twin boundary (TB) structure unambiguously via the lattice offsets resulting in volume invariancy and correct relative positioning of the twin variants. Secondly, the TB migration mechanism is determined from a crystallographic (zero net shuffle, $Σ\vec{s}$ = 0) and energetic standpoints (minimum energy path). The Generalized Planar Fault Energy (GPFE) curves are calculated for Ti, Hf, Mg, and Zr. Such GPFE curves for this twin mode are calculated for the first time, and point to unusually high unstable energies (300-850 mJ/m 2 ), and low migration barriers (<60 mJ/m 2 ) for twinning accompanied with large shuffle magnitudes, |$\vec{s}$|, comparable to the Burger’s vector (|$\vec{s}$| ≅ $b_e$ > 0.44Å)

36 MATERIALS SCIENCE↗