Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inclusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

An experimental, theoretical, and kinetic modeling study of post-flame oxidation of ammonia

The post -flame oxidation rate of ammonia was investigated in a novel atmospheric pressure flow reactor at temperatures of 1280 ± 16 K and as a function of residence time and mixture composition (1-10% O 2 , dry and moist). The experimental results, as well as selected data from literature, were analyzed using an updated detailed chemical kinetic model. The medium temperature, very lean conditions enhance the importance of reactions of the nitroxyl (HNO) intermediate. High-level theory was used to calculate the rate constant for HNO + NH 2 , indicating that this step is significantly faster than values used in literature. Furthermore, a trajectory based approach was used to determine collision efficiencies for selected bath gases for HNO + M. The experimental results show that the NH 3 oxidation rate increases with temperature and O 2 concentration, while the presence of water vapor slightly inhibits reaction. Formation of NO and N 2 O was strongly promoted at higher levels of O 2 . Modeling results agreed well with the measurements, except at the lowest level of O 2 . The predicted oxidation rate of NH 3 was shown to result from a delicate balance between chain branching and terminating steps involving NH 2 , H 2 NO, and HNO. Recent theoretical work on reactions of these species by Klippenstein and coworkers and Stagni et al. was instrumental in improving modeling predictions. After initiation, NO reached a pseudo -steady-state level, where the pathways to NO were largely balanced by the NH 2 + NO reaction. Nitric oxide was partly oxidized to NO 2 , with the NH 2 + NO 2 reaction responsible for most of the N 2 O formation. Novelty and significance statement: This study provides the first detailed kinetic analysis of the lean postflame oxidation of ammonia, based on time -resolved flow reactor data in a novel reactor. In addition to the post -flame oxidation rate of ammonia, data for formation of NO and N 2 O were compared with modeling predictions. The medium temperature, very lean conditions enhance the importance of reactions of the HNO and H 2 NO intermediates. Inclusion in the model of results from recent high-level theoretical work, including present calculations for HNO + NH 2 and HNO + M, was crucial for capturing the observed behavior. It is argued that the post -initiation steady-state NH 3 oxidation rates constitute important data for model validation, along with ignition delays and laminar flame speeds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The impact of anisotropic thermal expansion on the isothermal annealing of polycrystalline α -uranium

Although grain growth impacts microstructural evolution in a wide variety of materials systems, the effect of anisotropic thermal expansion on grain boundary mobility and texture evolution has not been widely studied. Anisotropic thermal expansion occurs in multiple non-cubic metals, and the thermomechanical processing behavior of these materials can be better understood with further study into the impact of thermal expansion on grain boundary mobility and texture evolution. In this work, we develop a mesoscale phase field model of grain growth that includes the effect of anisotropic thermal expansion, which is applied to study polycrystalline α-uranium, a highly anisotropic metal. Three-dimensional simulations on polycrystalline a-uranium with and without thermal expansion eigenstrains are performed to study the grain boundary mobility and texture evolution as a function of temperature. A strain-free temperature of 933 K is selected, and the system is studied at within the range of 873 – 933 K at intervals of ten degrees, resulting in increasing thermal eigenstrain with decreasing temperature. We also estimate a grain boundary mobility prefactor and activation energy based on existing experimental data of isothermal annealing of α-uranium. The grain boundary mobility is found to display significant deviation from Arrhenius behavior with the inclusion of thermal expansion eigenstrain as the amount of thermal eigenstrain (and thus elastic strain energy within the system) increases. This result explains an experimentally observed grain boundary mobility deviation from Arrhenius behavior. Furthermore, the texture evolution is affected, such that the grain orientations become less random with increasing thermal eigenstrain, which could explain experimentally observed texture behavior. These results indicate that the effect of thermal expansion should be considered when predicting the thermomechanical processing behavior of α-uranium and other materials with anisotropic thermal expansion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Parallel derivative-free optimization for simulation-based design of behind-the-meter energy systems

In this work, the integrated design and dispatch of behind-the-meter or distributed resources (e.g. stationary battery storage and solar PV generation) is considered. A simulation-based framework is employed, generating high-fidelity results with closed-loop predictive control at a fine resolution, at the expense of high computational cost (several minutes to a few hours per design point). To address this challenge, parallel derivative-free design methods are considered. Four methods are compared, including state-of-the-art surrogate-based methods (Radial-Basis Functions and Gaussian processes) and sampling strategies, an evolutionary-based method, and a simple sequential grid refinement method. As a case study, two types of design problem with increasing complexity are considered, namely, the design of behind-the-meter resources (three design variables) and the inclusion of grid capacity (four design variables). The second yields a constrained design problem for which violations can only be determined after solving the computationally expensive simulation. For the three-dimensional case, all methods present a good performance, achieving a solution within 1% of the optimum after the first iteration, with the sequential grid refinement exhibiting the fastest convergence and achieving the best final objective value. This indicates that the parallel evaluation of multiple sampling points may be more important than the choice of method for small decision spaces. For the four-dimensional constrained case, the Genetic Algorithm presents the best tradeoff between performance and computational effort, while the rough objective function terrain generated by constraint violation penalties reduces the performance of surrogate-based methods. Contour plots with flat regions indicate flexibility in the optimal design and highlight the importance of characterizing the solution space.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Hydro-mechanical coupled modeling of hydraulic fracturing using the mesh fragmentation technique

The inclusion of special interface elements between standard finite elements is becoming a common technique to model discontinuities in porous media using the finite element method (FEM). Recently, it was proved that high aspect ratio (HAR) elements can reproduce very satisfactorily the main features of behavior observed in a single hydraulically-induced fracture. In this paper, the mesh fragmentation technique (MFT) is proposed to extend the application of HAR elements to simulate more general problems involving the formation of hydraulic fractures in rocks by introducing this type of element in-between the standard FE of a typical mesh. The proposed framework makes use of standard FE techniques. Therefore, it is relatively easy to upgrade an existing FE program for continuous porous media to deal with evolving discontinuities. The proposed approach is verified and validated against available analytical and numerical solutions. The crack patterns predicted by the MFT are also compared with the ones observed in the laboratory. The formation of multiple fractures is also analyzed. In all cases, the proposed technique was able to properly capture the main features of rock behavior subjected to hydraulic fracturing.

58 GEOSCIENCES↗
DOE OSTI2020

Simulation of axial tensile well deformation during reservoir compaction in offshore unconsolidated methane hydrate-bearing formation

Sand production encountered in the 2013 offshore field gas production tests at the Nankai Trough, Japan, could be attributed to well failure during reservoir compaction. In this study, well integrity under various reservoir compaction patterns for the Nankai Trough case is examined using a well-formation finite element model. Here, the modelling details include the inclusion of a cement sheath as well as the modelling of construction processes (such as cement shrinkage). Well elongation in the overburden layer becomes significant when the reservoir subsidence is localized near the wellbore under large depressurization. Results show that the maximum plastic deviatoric strain level in the cement could reach 0.7% when the maximum reservoir subsidence reaches 0.85 m and cement shrinkage is limited. When cement shrinkage rises to 0.75%, the maximum plastic deviatoric strain increases to 2.4% as the cement accumulates additional plastic strain during shrinkage due to its deformation being constrained by the casing. In order to prevent the cement from failure, it might be effective to hold the pressure drawdown at a low level (e.g., several MPa) until the hydrate dissociation front advances to a certain radius from the well (e.g., a couple of tens of metres).

58 GEOSCIENCES↗
DOE OSTI2024

Pathways to formulate lightweight and ultra-lightweight 3D printable cementitious composites

Here, this paper studies the pathways to formulate lightweight and ultra-lightweight 3D printable cementitious composites. A hybrid approach was proposed by combining the advantages of traditional chemical-induced foaming (foaming approach) and lightweight particulate inclusions (synthetic foam approach). A comprehensive experimental program was conducted to evaluate the effects of foaming agents and fly ash cenosphere (FAC) on the printability, microstructure, mechanical and thermal properties of 3D printed samples. The results showed that the hybrid approach could produce a mixture with a density as low as 470 kg/m 3 while ensuring good flowability and buildability owing to the lubricating effect of foaming and supporting skeleton formed by FAC. In addition, a three-step homogenization procedure was also developed to predict the effective elastic modulus and thermal conductivity of 3D printable cementitious composites and cementitious foam. The findings of the study highlighted the effectiveness of the hybrid approach in formulating 3D printable ultra-lightweight cementitious composites in thermal insulation and acoustic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermal and mechanical performance of gypsum composites containing fly ash cenosphere encapsulated phase change materials

Utilizing phase change materials (PCMs) within construction materials improves the thermal energy storage capabilities in the built environment. Notably, integrating PCMs into drywalls presents a promising avenue to reduce building energy use. However, incorporating PCMs into drywalls poses challenges, particularly reduced mechanical properties and workability limitations as it can adversely affect the hardening and cohesiveness of gypsum composites. To address these challenges, this study explores a novel strategy to incorporate PCMs into gypsum composites through fly ash cenosphere-encapsulated PCM, namely CenoPCM, aiming to enhance the mechanical properties and thermal conductivity over existing commercial counterparts. An experimental program was conducted to study the impact of the inclusion of CenoPCM on the mechanical and thermal performance of gypsum composites, and the results were compared to those of commercially available polymerencapsulated PCM benchmark (Micronal). The findings highlighted that PCM-charged samples exhibited up to 95.90 J/g (CenoPCM) of latent heat with 70 % CenoPCM loading. The results of mechanical tests also showed that CenoPCM outperformed its polymer-encapsulated counterpart, achieving 55 % higher mechanical strength on average. Here, this improvement is attributed to the rigid shell of fly ash cenosphere (FAC) serving as a PCM carrier, providing a skeleton-like structure to gypsum composites for higher load-bearing capacity. Additionally, hotbox tests demonstrated that the CenoPCM-charged wall panels yielded a 20 % higher thermal conductivity and a 22 % increased time lag compared to Micronal PCM-charged panels, indicating its potential to shift the peak load in buildings.

Ceno PCM↗
DOE OSTI2022

Discovering the nanoscale origins of localized corrosion in additive manufactured stainless steel 316L by liquid cell transmission electron microscopy

Here, we use liquid cell scanning transmission electron microscopy (STEM) to directly characterize the nanoscale origins of corrosion initiation in Additive manufacturing (AM) 316 L stainless steel. Under applied anodic potentials, we found that the dislocation cellular boundaries were preferentially corroded and that regions of localize corrosion occurred along the cellular boundaries. We directly observed the earliest stages of corrosion by controlling the biasing parameters to decelerate the corrosion processes. The results show that highly localized corrosion occurs via inclusion dissolution along dislocation cell boundaries. More widespread corrosion initiates at the dislocation cell boundaries and spreads throughout the dislocation networks.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Reverse martensitic transformation on the corrosion behavior of a 2304 lean duplex stainless steel

This study investigates the influence of the reverse martensitic transformation on the corrosion behavior of 2304 lean duplex stainless steel (LDSS) at low temperatures (400–600°C). The steel underwent cold rolling, followed by isochronal annealing for 0.5 h. Phase transformations and microstructures were analyzed using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Corrosion resistance was evaluated using a syringe cell with cyclic potentiodynamic polarization in 0.6 M NaCl solution and double-loop electrochemical potentiokinetic reactivation in 0.5 M H 2 SO 4 + 0.001 M KSCN solution. A bimodal breakdown potential behavior, associated with either pitting or transpassivity, was observed in the as-received (AR) and samples annealed at 400°C. Pitting in the AR sample was associated with Al–Mg–Si–Ca–O inclusions, while pitting on the samples annealed at 400°C was linked to local reduced passive film resistance. Severe cold rolling enhanced the pitting resistance of 2304 LDSS. Selective electrochemical etching revealed preferential corrosion at phase interfaces and within the austenite phase. Additionally, annealing at 500°C to 600°C led to a marked decrease in pitting resistance and increased sensitization. Electron backscatter diffraction analysis of the corroded pits in the annealed specimens indicated that pits tend to nucleate and grow in α'-martensite/austenite regions. Furthermore, the nanostructure formed during low-temperature reversion, characterized by dislocation-cell martensite with high dislocation density and stacking faults, may adversely affect corrosion resistance due to heterogeneities associated with alloying element redistribution.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Efficient Fourier transforms for transverse momentum dependent distributions

Hadron production at low transverse momenta in semi-inclusive deep inelastic scattering can be described by transverse momentum dependent (TMD) factorization. This formalism has also been widely used to study the Drell-Yan process and back-to-back hadron pair production in $e^+e^-$ collisions. These processes are the main ones for extractions of TMD parton distribution functions and TMD fragmentation functions, which encode important information about nucleon structure and hadronization. One of the most widely used TMD factorization formalism in phenomenology formulates TMD observables in coordinate $b_\perp$-space, the conjugate space of the transverse momentum. The Fourier transform from $b_\perp$-space back into transverse momentum space is sufficiently complicated due to oscillatory integrands that it requires a careful and computationally intensive numerical treatment in order to avoid potentially large numerical errors. Within the TMD formalism, the azimuthal angular dependence is analytically integrated and the two-dimensional $b_\perp$ integration reduces to a one-dimensional integration over the magnitude $b_\perp$. In this paper we develop a fast numerical Hankel transform algorithm for such a $b_\perp$-integration that improves the numerical accuracy of TMD calculations in all standard processes. Libraries for this algorithm are implemented in Python 2.7 and 3, C++, as well as FORTRAN77. All packages are made available open source.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Time-discretization of a plasma-neutral MHD model with a semi-implicit leapfrog algorithm

The semi-implicit leapfrog time-discretization is a workhorse algorithm for initial-value MHD codes to bridge between vastly separated time scales. Inclusion of atomic interactions with neutrals breaks the functional structure of the MHD equations that exploited by the leapfrog. In this work, we address how to best integrate atomic physics into the semi-implicit leapfrog. Following the Crank-Nicolson method, one approach is to time-center the atomic interactions in the linear solver and use a Newton method to include the nonlinear contributions. Alternatively, another family of methods are based on operator-splitting the terms associated with the atomic interactions using a Strang-splitting technique. These methods naturally break equations into constituent ODE and PDE parts and preserve the structure exploited by the semi-implicit leapfrog. We study the accuracy and efficiency of these methods through a battery of 0D and 1D cases and show that a second-order-in-time Douglas-Rachford inspired coupling between the ODE and PDE advances is effective in reducing the time-discretization error to be comparable to that of Crank-Nicolson with Newton iteration of the nonlinear terms. Splitting ODE and PDE parts results in independent matrix solves for each field which reduces the computational cost considerably and provides parallelization over species relative to Crank-Nicolson.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

A universal implementation of radiative effects in neutrino event generators

Due to the similarities between electron-nucleus (eA) and neutrino-nucleus scattering (νA), eA data can contribute key information to improve cross-section modeling in eA and hence in νA event generators. However, to compare data and generated events, either the data must be radiatively corrected or radiative effects need to be included in the event generators. We implemented a universal radiative corrections program that can be used with all reaction mechanisms and any eA event generator. Our program includes real photon radiation by the incident and scattered electrons, and virtual photon exchange and photon vacuum polarization diagrams. It uses the “extended peaking” approximation for electron radiation and neglects charged hadron radiation. This method, validated with GENIE, can also be extended to simulate νA radiative effects. This work facilitates data-event-generator comparisons used to improve νA event generators for the next-generation of neutrino experiments. Program Title: emMCRadCorr CPC Library link to program files:https://doi.org/10.17632/hmsxg82vnf.1 Developer's repository link:https://github.com/e4nu/emMCRadCorr Licensing provisions: AGPLv3 Programming language:C++ Nature of problem: Radiative effects can significantly modify the event kinematics and the resulting cross-sections. Such effects must be accounted for when comparing event generators to eA data. Existing radiative correction codes are tailored to specific processes and topologies, and are limited to a restricted phase space defined by the spectrometer acceptance. Therefore, a more general approach is required to apply radiative corrections to semi-inclusive and exclusive eA measurements. Solution method: Our program incorporates real photon radiation from both the incident and scattered electrons, as well as virtual photon exchange and photon vacuum polarization effects. It employs the “extended peaking” approximation for electron radiation while neglecting contributions from charged hadron radiation. The code is fully decoupled from event generator codes and can be used for all event generators in the market.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Response to a comment on Dessert et al. “The dark matter interpretation of the 3.5 keV line is inconsistent with blank-sky observations”

The dark matter explanation of the 3.5 keV line is strongly disfavored by our work in Dessert et al. (2020). Boyarsky et al. (2004) questions that conclusion: modeling additional background lines is claimed to weaken the limit sufficiently to re-allow a dark matter interpretation. Here, we respond as follows. (1) A more conservative limit is obtained by modeling additional lines; this point appeared in its entirety in our work in Dessert et al. (2020), though we also showed that the inclusion of such lines is not necessary. (2) Despite suggestions in Boyarsky et al. (2004), even the more conservative limits strongly disfavor a decaying dark matter origin of the 3.5 keV line.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Second-generation downscaled earth system model data using generative machine learning

The second-generation Sup3rCC dataset provides high-resolution meteorological data generated through the downscaling of multiple earth system models (ESMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6). This downscaling is performed through application of a generative machine learning approach called Super-Resolution for Renewable Resource Data (sup3r). This dataset builds on the first-generation Sup3rCC data by applying improved bias correction methods and adding downscaled precipitation to the output variables. As with the first Sup3rCC version, the data still include temperature, wind speed and direction at multiple heights, pressure, three components of downwelling solar radiation, and relative humidity—all at 4-kilometer (km) hourly resolution over the contiguous United States. This is a 25x spatial enhancement and 24x temporal enhancement of the source 100-km daily-average ESM data. This extension of the Sup3rCC dataset includes data from six ESMs from two shared socioeconomic pathways (SSPs) totaling 400 years of data with multiple future projections of changing meteorological conditions. The scenario selection was based on a structured evaluation of historical ESM skill and comprehensive representation of possible trajectories of future climate change in temperature, humidity, precipitation, solar irradiance, and near-surface wind speeds. The inclusion of multiple future projections is intended to enable users to assess key drivers of un 36 certainty and variability. All data are double-bias corrected, resulting in a product that can be used out-of-the-box for energy system analysis with minimal historical bias. The potential applications of Sup3rCC data extend to various topics in renewable energy resource assessment, energy systems modeling, and grid resilience studies. High-resolution future meteorological projections are critical for evaluating the effects of changing meteorological conditions on renewable energy generation, energy demand, and for optimizing energy storage and grid infrastructure. The 4-km hourly resolution of the downscaled data enables understanding of spatial and temporal variability at the scales necessary for energy system operational planning. In addition, the dataset can support risk assessments by providing detailed information on possible future extreme weather events and long-term meteorological variability at scales relevant to energy infrastructure. By offering an enhanced representation of possible future meteorological conditions, the second-generation Sup3rCC dataset enables more precise modeling of energy resilience and adaptation strategies in response to changing meteorological conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Chemical mixture exposure patterns and obesity among U.S. adults in NHANES 2005–2012

The effect of chemical exposure on obesity has raised great concerns. Real-world chemical exposure always imposes mixture impacts, however their exposure patterns and the corresponding associations with obesity have not been fully evaluated. To discover obesity-related mixed chemical exposure patterns in the general U.S. population. Sparse Decompositional Regression (SDR), a model adapted from sparse representation learning technique, was developed to identify exposure patterns of chemical mixtures with exclusion (non-targeted model) and inclusion (targeted model) of health outcomes. We assessed the relationships between the identified chemical mixture patterns and obesity-related indexes. We also conducted a comprehensive evaluation of this SDR model by comparing to the existing models, including generalized linear regression model (GLM), principal component analysis (PCA), and Bayesian kernel machine regression (BKMR). Eight core exposure patterns were identified using the non-targeted SDR model. Patterns of high levels of MEP, high levels of naphthalene metabolites (ΣOH-Nap), and a pattern of high exposure levels of MCOP, MCNP, and MCPP were positively associated with obesity. Patterns of high levels of BP3, and a pattern of higher mixed levels of MPB, PPB, and MEP were found to have negative associations. Associations were strengthened using the targeted SDR model. In the single chemical analysis by GLM, BP3, MBP, PPB, MCOP, and MCNP showed significant associations with obesity or body indexes. The SDR model exceeded the performance of PCA in pattern identification. Both SDR and BKMR identified a positive contribution of ΣOH-Nap and MCOP, as well as a negative contribution of BP3 and PPB to obesity. Our study identified five core exposure patterns of chemical mixtures significantly associated with obesity using the newly developed SDR model. The SDR model could open a new avenue for assessing health effects of environmental mixture contaminants.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A multi-objective optimization model for cropland design considering profit, biodiversity, and ecosystem services

More sustainable agricultural methods are needed to alleviate the decreases in biodiversity and ecosystem services that have occurred because of industrial agriculture. One such method is the inclusion of alternative crops into croplands that can support biodiversity, reduce erosion and chemical runoff, and sequester carbon in the soil. However, the question of where such crops should be planted to balance competing economic and environmental objectives remains open. To this end, we develop a mixed-integer quadratically constrained program to optimize the layout of a cropland considering economic, biodiversity, greenhouse gas emissions, and water quality objectives. We include spatially varying fertilization as a decision variable in addition to crop establishment location. We further include the effect of core area and edges between different crops on biodiversity. To demonstrate the applicability of the model, we apply it to an example field, showing how the optimal cropland design changes as a decision-maker prioritizes different objectives and as edges have different impacts on biodiversity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Electrodeposition of Fe–Ni alloy on Au(111) substrate: Metastable BCC growth via hydrogen evolution and interactions

The electrodeposition of Fe–Ni alloy is usually complicated by the effects of anomalous codeposition and hydrogen evolution. Although the influence of the deposition conditions on the alloy composition has been studied extensively, very few works considered the influence of growth conditions on the phase constitution. In this work, various electrodeposition conditions were investigated to grow Fe–Ni alloy films (<30 nm) with similar compositions in the Invar-to-equiatomic range on Au (111) substrate. Highly (110) oriented BCC phase Fe–Ni with a Ni fraction (ca. 40 at.% Ni) well beyond the equilibrium solubility limit (5 at.% Ni) was obtained with a significant alloy deposition partial current. An increase in the fraction of the BCC phase was found to be associated with a higher alloy deposition partial current, but not necessarily with an increase in the hydrogen evolution partial current. Motivated by the findings from this work, the formation of the metastable BCC phase is speculated to depend on the competing kinetics between the inclusion and desorption of hydrogen adatoms at the electrodeposited growth front.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanically and thermally robust microporous copolymer separators for lithium ion batteries

Next generation, multifunctional separators can enhance energy storage, power, and safety performance of lithium ion batteries but must be simple to fabricate and incorporate with existing roll-to-roll manufacturing. Here, this study presents a strategy to facilely prepare these separators using UV-initiated polymerization-induced phase separation (PIPS), wherein microporous polymer separators are fabricated directly from constituent monomers and ethylene carbonate (EC) porogen. This enables a wide compositional design space as co-monomers with specific chemical functionality can be readily incorporated into the PIPS precursor mixture. Herein, 1,4-butanediol diacrylate (BDDA) was copolymerized with poly(ethylene glycol) diacrylate (PEGDA) to increase the acrylate conversion in the photopolymerization and improve mechanical properties. By tuning the ratio of PEGDA and EC, separators with high porosity (41.3%) and effective ionic conductivity (2.09 mS cm –1 ) were prepared. Inclusion of PEGDA was essential to increasing the elastic modulus to > 345 MPa, which is required for cell assembly by roll-to-roll manufacturing. All separators prepared were shown to enable reversible cycling of lithium metal/LiNi 0.5 Mn 0.3 Co 0.2 O 2 half-cells for 100 cycles. Unlike conventional polyolefin separators, which were shown to melt at 160 °C and shrink by up to 29.8% at elevated temperatures, the PIPS separators possess exceptional, safety-enhancing thermomechanical properties, undergoing no phase transitions or thermal shrinkage.

25 ENERGY STORAGE↗