Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Structure and Stability of GeAu{sub n}, n = 1-10 clusters: A Density Functional Study

The structures of Germanium doped gold clusters GeAu{sub n} (n = 1-10) have been investigated using ab initio calculations based on density functional theory (DFT). We have obtained ground state geometries of GeAu{sub n} clusters and have it compared with Silicon doped gold clusters and pure gold clusters. The ground state geometries of the GeAu{sub n} clusters show patterns similar to silicon doped gold clusters except for n = 5, 6 and 9. The introduction of germanium atom increases the binding energy of gold clusters. The binding energy per atom of germanium doped cluster is smaller than the corresponding silicon doped gold cluster. The HUMO-LOMO gap for Au{sub n}Ge clusters have been found to vary between 0.46 eV-2.09 eV. The mullikan charge analysis indicates that charge of order of 0.1e always transfers from germanium atom to gold atom.

74 ATOMIC AND MOLECULAR PHYSICS↗

Magnetometry and transport data complement polarized neutron reflectometry in magnetic depth profiling

Exchange coupled magnetic hard layer/soft layer thin films show a variety of complex magnetization reversal mechanisms depending on the hierarchy of interaction strengths within and between the films. Magnetization reversal can include uniform rotation, soft layer biasing, as well as exchange spring behavior. We investigate the magnetization reversal of a CoPt/Permalloy/Ta/Permalloy heterostructure. Here, Stoner-Wohlfarth-type uniform magnetization rotation of the virtually free Permalloy layer and exchange spring behavior of the strongly pinned Permalloy layer are found in the same sample. We investigate the complex magnetization reversal by polarized neutron reflectometry, magnetometry, and magneto-transport. The synergy of combining these experimental methods together with theoretical modeling is key to obtain the complete quantitative depth resolved information of the magnetization reversal processes for a multilayer of mesoscopic thickness.

36 MATERIALS SCIENCE↗

Phase evolution and magnetocaloric effect of melt-spun Mn{sub 3}Sn{sub 2-xM{sub x}} (M = B, C; x = 0-0.5) ribbons

The effects of B and C substitution for Sn on phase components, Curie temperature T{sub C}, and magnetocaloric effect of melt-spun Mn{sub 3}Sn{sub 2-x}M{sub x} (M B, C; x = 0-0.5) ribbons have been investigated. X-ray diffraction (XRD) results show that the main phase in the as-spun Mn{sub 3}Sn{sub 2-xM{sub x}} (M = B, C; x 0-0.5) ribbons is Mn{sub 3}Sn{sub 2} of Ni{sub 3}Sn{sub 2}-type (Pnma). Minor Mn{sub 2}B (when x {>=} 0.1) or Mn{sub 5}C{sub 2} (when x > 0.1) secondary phase is formed, and their amounts increase with increasing B and C concentration, respectively. The Curie temperature T{sub C} of these ribbons varies in the temperature range of 240-250 K. The peak values of the maximal magnetic entropy change, -{Delta}S{sub M}{sup max}, are about 13.6-18.3 mJ/cm{sup 3} K for B-substituted ribbons and 13.6-17.5 mJ/cm{sup 3} K for C-substituted ribbons, respectively, at a maximum applied field of 50 kOe. These values are about one fifth that of Gd (81.4 mJ/cm{sup 3} K). However, the relatively broader temperature range of the half maximum of {Delta}S{sub M} peak ({approx}100 K), low-cost and nontoxic elements still make Mn{sub 3}Sn{sub 2}-based ribbons the promising candidates for magnetic refrigeration applications close to room temperature.

36 MATERIALS SCIENCE↗

Temperature dependence of magnetic behaviour in very fine grained, spark plasma sintered NiCuZn ferrites

Recently, using spark plasma sintering technique, a family of very fine grained, fully dense NiCuZn ferrites have been produced, which show constant permeability up to several 10 MHz. These ferrites can be used for filtering purposes in high frequency applications where a wide frequency band is required. In this paper, we study the magnetization processes taking place in these nano grained materials, in the frequency interval of 100 kHz to 5 MHz. Using a fluxmetric hysteresis graph, permeability, loss, and BH loops are measured at different temperatures, from -5 deg. C to 110 deg. C. Results are compared to the behavior of micrometric grain size ferrites, which are commonly used for power electronic and high frequency applications.

36 MATERIALS SCIENCE↗

Phase transformation and crystallization kinetics of a-Ge/Cu bilayer for blue-ray recording under thermal annealing and pulsed laser irradiation

Similar phase formation and crystallization behaviors have been observed in the a-Ge/Cu bilayer under thermal annealing and pulsed laser irradiation. The Cu{sub 3}Ge phase would form prior to the crystallization of a-Ge. The crystallization temperature and activation energy for crystallization of a-Ge were reduced to 310 deg. C and 2.75 eV, respectively, due to the fast Ge diffusion in the already formed germanide phases. The reaction exponent m of {approx}2.0 for the a-Ge/Cu bilayer corresponds to a crystallization process in which grain growth occurs with nucleation, and the nucleation rate decreases with the progress of the grain growth process. Under pulsed laser irradiation, the maximum data-transfer-rates of 44, 56, 74, and 112 Mbit/s can be achieved in the write-once blue-ray disk at the recording powers of 3, 4, 5, and 6 mW, respectively. The a-Ge/Cu bilayer also demonstrated sufficient optical contrast and adequate absorptance for low power and high speed write-once blue-ray recording.

36 MATERIALS SCIENCE↗

Optimization of Ti addition in Fe for Fe-Ti-N thin films

In this work we studied the magnetic and structural properties of Fe{sub 1-x}Ti{sub x}(x=0, 0.02, 0.05, 0.07) thin films prepared with dc-magnetron sputtering. It was found that the inter-atomic spacing increases as the amount of Ti is increased indicating that Ti is getting dissolved substitutionally in Fe lattice. We found that the addition of 5% Ti is best suited for its usage in Fe-Ti-N alloys.

36 MATERIALS SCIENCE↗

Silicon ion irradiation effects on the magnetic properties of ion beam synthesized CoPt phase

Ion beam mixing of Pt/Co bilayers using self ion (Pt{sup +}) beam results in formation of CoPt phase. Upon ion beam annealing the ion mixed samples using 4 MeV Si{sup +} ions at 300 deg. C, diffusion of Co towards the Pt/Co interface is observed. The Si{sup +} ion beam rotates the magnetization of the CoPt phase from in plane to out of plane of the film.

36 MATERIALS SCIENCE↗

Non-destructive evaluation of degradation in EB-PVD thermal barrier coatings by infrared reflectance spectroscopy

At room temperature and atmospheric conditions infrared reflectance spectroscopy and X-ray diffraction were employed for the detection of the phase transformation and residual stress within thermal barrier coatings (TBC). The TBC's samples initially consisted of the porous ceramic topcoat deposited by electron beam plasma vapor deposition, a bond coat and a superalloy substrate. Reflectance spectroscopy scans were performed from 7497 cm{sup -1} to 68 cm{sup -1} to analysis the fingerprint region as well as the chemical bonding region. These regions should indicate if a detectable change within the TBC response is a result of thermal degradation of the microstructure and the changes in yttrium dispersion throughout the yttrium stabilized zirconium. The thermal degradation was induced by thermal cycling the samples to 1100 Degree-Sign C and then cooling them in an atmospheric environment. X-ray diffraction was also used to detect the phase composition within the TBC samples and see if either would clearly identify failure prior to actual spallation. The eventual measurability and quantify-ability of the phase changes within the TBC's may be used as an effective non-destructive evaluation (NDE) technique that would allow personnel in the field to know when servicing of the turbine blade was necessary.

36 MATERIALS SCIENCE↗

Three-dimensional imaging of copper pillars using x-ray tomography within a scanning electron microscope: A simulation study based on synchrotron data

While microelectronic devices are frequently characterized with surface-sensitive techniques having nanometer resolution, interconnections used in 3D integration require 3D imaging with high penetration depth and deep sub-micrometer spatial resolution. X-ray tomography is well adapted to this situation. In this context, the purpose of this study is to assess a versatile and turn-key tomographic system allowing for 3D x-ray nanotomography of copper pillars. The tomography tool uses the thin electron beam of a scanning electron microscope (SEM) to provoke x-ray emission from specific metallic targets. Then, radiographs are recorded while the sample rotates in a conventional cone beam tomography scheme that ends up with 3D reconstructions of the pillar. Starting from copper pillars data, collected at the European Synchrotron Radiation Facility, we build a 3D numerical model of a copper pillar, paying particular attention to intermetallics. This model is then used to simulate physical radiographs of the pillar using the geometry of the SEM-hosted x-ray tomography system. Eventually, data are reconstructed and it is shown that the system makes it possible the quantification of 3D intermetallics volume in copper pillars. The paper also includes a prospective discussion about resolution issues.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Self-calibration of a W/Re thermocouple using a miniature Ru-C (1954 °C) eutectic cell

Previous successful investigations of miniature cobalt-carbon (Co-C, 1324 °C) and palladium-carbon (Pd-C, 1492 °C) high temperature fixed-point cells for thermocouple self-calibration have been reported [1-2]. In the present work, we describe a series of measurements of a miniature ruthenium-carbon (Ru-C) eutectic cell (melting point 1954 °C) to evaluate the repeatability and stability of a W/Re thermocouple (type C) by means of in-situ calibration. A miniature Ru-C eutectic fixed-point cell with outside diameter 14 mm and length 30 mm was fabricated to be used as a self-calibrating device. The performance of the miniature Ru-C cell and the type C thermocouple is presented, including characterization of the stability, repeatability, thermal environment influence, ITS-90 temperature realization and measurement uncertainty.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spin reorientation via antiferromagnetic coupling

Spin reorientation in antiferromagnetically coupled (AFC) Co/Pd multilayers, wherein the thickness of the constituent Co layers was varied, was studied. AFC-Co/Pd multilayers were observed to have perpendicular magnetic anisotropy even for a Co sublayer thickness of 1 nm, much larger than what is usually observed in systems without antiferromagnetic coupling. When similar multilayer structures were prepared without antiferromagnetic coupling, this effect was not observed. The results indicate that the additional anisotropy energy contribution arising from the antiferromagnetic coupling, which is estimated to be around 6 × 10{sup 6} ergs/cm{sup 3}, induces the spin-reorientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultra-thin L1{sub 0}-FePt for perpendicular anisotropy L1{sub 0}-FePt/Ag/[Co/Pd]{sub 30} pseudo spin valves

Perpendicular anisotropy L1{sub 0}-FePt/Ag/[Co/Pd]{sub 30} pseudo spin valves (PSVs) with ultra-thin L1{sub 0}-FePt alloy free layer possessing high anisotropy and thermal stability have been fabricated and studied. The thickness of the L1{sub 0}-FePt layer was varied between 2 and 4 nm. The PSV became increasingly decoupled with reduced L1{sub 0}-FePt thickness due to the larger difference between the coercivity of the L1{sub 0}-FePt and [Co/Pd]{sub 30} films. The PSV with an ultra-thin L1{sub 0}-FePt free layer of 2 nm displayed a high K{sub u} of 2.21 × 10{sup 7} ergs/cm{sup 3}, high thermal stability of 84 and a largest giant magnetoresistance of 0.54%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low temperature spin dynamics in Cr{sub 7}Ni-Cu-Cr{sub 7}Ni coupled molecular rings

Proton Nuclear Magnetic Resonance (NMR) relaxation measurements have been performed down to very low temperature (50 mK) to determine the effect of coupling two Cr{sub 7}Ni molecular rings via a Cu{sup 2+} ion. No difference in the spin dynamics was found from nuclear spin lattice relaxation down to 1.5 K. At lower temperature, the {sup 1}H-NMR line broadens dramatically indicating spin freezing. From the plot of the line width vs. magnetization, it is found that the freezing temperature is higher (260 mK) in the coupled ring with respect to the single Cr{sub 7}Ni ring (140 mK)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the spin-twist structure on the spin-wave dynamics in Fe{sub 55}Pt{sub 45}/Ni{sub 80}Fe{sub 20} exchange coupled bi-layers with varying Ni{sub 80}Fe{sub 20} thickness

We have investigated optically induced ultrafast magnetization dynamics of a series of Fe{sub 55}Pt{sub 45}/Ni{sub 80}Fe{sub 20} exchange spring bi-layers with varying Ni{sub 80}Fe{sub 20} thickness. Rich spin-wave spectra are observed; whose frequency shows a strong dependence on the Ni{sub 80}Fe{sub 20} layer thickness. Micromagnetic simulations based on a simplified magnetic microstructure were able to reproduce the experimental data qualitatively. The spin twist structure introduced in the Ni{sub 80}Fe{sub 20} layer gives rise to new modes in the composite system as opposed to the bare Ni{sub 80}Fe{sub 20} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron diffraction study of MnNiGa{sub 2}—Structural and magnetic behaviour

MnNiGa{sub 2} crystallizes in the L21 (Heusler) structure and has a ferromagnetic ordering temperature T{sub C} ∼ 192 K. Rietveld refinement of the neutron diffraction patterns indicates that the Ga atoms occupy the equivalent 8c position, while Mn and Ni share the 4a (0, 0, 0) and 4b (0.5, 0.5, 0.5) sites with a mixed occupancy of Mn and Ni atoms. It is found that that ∼83% of Mn and ∼17% Ni are located at the 4a site while ∼83% of Ni and ∼17% Mn occupy the 4b site. There is no evidence of a magneto-volume effect around T{sub C}. In agreement with this finding, our detailed critical exponent analyses of isothermal magnetization curves and the related Arrott plots confirm that the magnetic phase transition at T{sub C} is second order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low temperature crystal structure and magnetic properties of RAl{sub 2}

Low temperature crystal structure and magnetic properties of RAl{sub 2} (R = Pr and Nd) have been studied using temperature dependent powder x-ray diffraction, magnetization, and heat capacity measurements. Unlike PrAl{sub 2}, NdAl{sub 2} retains cubic MgCu{sub 2}-type structure from room temperature down to 5 K, which is also confirmed from first principles electronic structure calculations. The magnetization measurements show both PrAl{sub 2} and NdAl{sub 2} order ferromagnetically at T{sub C} = 32 K and 77 K, respectively. However, the magnetization measurements show the former is a hard ferromagnet compared to the latter which is a soft ferromagnetic material. The magnetic entropy change obtained from heat capacity measurements at ΔH = 30 kOe for PrAl{sub 2} and NdAl{sub 2} are 3.15 J mol{sup −1} K{sup −1} and 1.18 J mol{sup −1} K{sup −1}, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗