Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geostationary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Optimization in the design of a 12 gigahertz low cost ground receiving system for broadcast satellites. Volume 2: Antenna system and interference

The antenna characteristics are analyzed of a low cost mass-producible ground station to be used in broadcast satellite systems. It is found that a prime focus antenna is sufficient for a low-cost but not a low noise system. For the antenna feed waveguide systems are the best choice for the 12 GHz band, while printed-element systems are recommended for the 2.6 GHz band. Zoned reflectors are analyzed and appear to be attractive from the standpoint of cost. However, these reflectors suffer a gain reduction of about one db and a possible increase in sidelobe levels. The off-axis gain of a non-auto-tracking station can be optimized by establishing a special illumination function at the reflector aperture. A step-feed tracking system is proposed to provide automatic procedures for searching for peak signal from a geostationary satellite. This system uses integrated circuitry and therefore results in cost saving under mass production. It is estimated that a complete step-track system would cost only $512 for a production quantity of 1000 units per year.

Ohkubo, K.↗

A new method for satellite orbit determination using an operational worldwide transponder network

The method utilizes computer programs developed for the forthcoming ATS-F/NIMBUS-F tracking and data relay experiment where the basic tracking measurements are multiple path round-trip propagation times and rates. This method of orbit computation has recently been successfully evaluated by tracking a geostationary satellite (ATS-3) using an existing VHF (150 MHz) network of automatic transponders. A master station sequentially interrogates each transponder via the ATS-3. The master site is located at Schenectady, N. Y. and four automatic transponders were located at Shannon, Reykajavik, Buenos Aires, and Seattle respectively. Data at hourly intervals were collected during a 24 hour period on April 18-19, 1973. After correcting this data for known systematic errors it was provided as input to an orbit determination program where all satellite motions during signal propagation are rigorously accounted for. The resulting estimated ATS-3 orbit yielded observational residuals on the order of 100 meters. By using more than one satellite the present scheme is further capable of accurately locating several stationary or mobile terminals as part of the overall orbital solution.

Lynn, J. J.↗

Task four report: Telemetry, command, and data handling

An overview of the telemetry, command, and data handling features of four spacecraft developed under GSFC management is presented. Two of these spacecraft ATS and SMS, are designed for geostationary orbit; the other two OSO and ERTS, are designed for low earth orbits. The program time spans for these spacecraft are as shown. The programs are seen to be near contemporary, especially in the 1973, 1974 period. All of the spacecraft listed were developed under GSFC control and are thus subject to the standards set forth in the Aerospace Data System Standard developed by GSFC. These standards must be adhered to by all spacecraft programs under GSFC control or utilizing STDN unless waivers have been granted. The standards were developed to maximize the utilization of the large amount of standard equipment at each STDN ground facility. The standards impose bounds on both the command and telemetry formats to be compatible with the STDN ground station unless valid and acceptable reasons are raised to deviate from these restraints.

Source record↗

Role of sudden commencements in triggering magnetospheric substorms

Sudden commencement events are examined in terms of available auroral-zone and low-latitude magnetic field, data, interplanetary plasma and magnetic field data, and magnetospheric electron flux and magnetic field data from the geostationary satellite ATS 1.

Newell, R. E.↗

The role of satellites in snow and ice measurements

Earth-orbiting polar satellites are desirable platforms for the remote sensing of snow and ice. Geostationary satellites at a very high altitude (35,900 km) are also desirable platforms for many remote sensors, for communications relay, for flood warning systems, and for telemetry of data from unattended instrumentation in remote, inaccessible places such as the Arctic, Antarctic, or mountain tops. Optimum use of satellite platforms is achieved only after careful consideration of the temporal, spatial, and spectral requirements of the environmental mission. The National Environmental Satellite Service will maintain both types of environmental satellites as part of its mission.

Wiesnet, D. R.↗

Orbital positioning of domestic satellites

An important factor in establishing domestic or regional communication satellite systems which share a given frequency band is the positioning of the satellites in the arc of the geostationary orbit that is visible to the area to be served. A description is given of the results of orbit spacing studies performed with respect to the eight different space systems proposed to provide U.S. domestic communication services. Some tentative guidelines which may be of general use are proposed. Four sets of computer models were studied, taking into account quasi-homogeneous models, a five-system model, a heterogeneous model with 3-degree spacings, and a heterogeneous model with unequal spacings and with coordination.

Gubin, S.↗

Experimental investigation of aeronautical and maritime communications and surveillance using satellites

The experimental program described included an evaluation of every significant factor affecting the accuracy of position fixing by range measurements from geostationary satellites. The tone-code ranging technique was found to provide a precision of roughly 0.1 n mi at mid-lattitudes with one range measurement at L-band and one at VHF. The factors which introduce bias errors were studied analytically and experimentally, and means of rectifying the bias errors were developed. An operational system at L-band may be expected to provide position fix accuracy of 0.1 n mi over large regions of the earth. The ranging technique developed within this program is digital, and uses a single signalling waveform and a single modem for communications and ranging.

Anderson, R. E.↗

Multiple beam communicating satellites with remote beam steering and beam shaping

Multiple beam phased arrays are shown to enhance the performance of several anticipated geostationary communications satellite programs because of the greater efficiency and flexibility of the phased array. It is shown that the efficiency of arrays can be significantly greater than corresponding multiple feed dishes and that the problems of crossover loss and performance degradation with parts failures are thereby avoided. On an open loop basis, it is shown that a multiple beam array can provide higher EIRP over a coverage area. On a closed loop basis, it is shown that an adaptive array can provide nulling of unwanted signals while simultaneously providing gain in the direction of a desired signal.

Sielman, P. F.↗

Correlation of Kp with the substorm-injected plasma boundary

The local time position of the low-energy substorm-injected plasma boundary in the dusk to midnight region of the magnetosphere as observed by the geostationary satellite ATS 5 is found to be correlated with the interpolated Kp index. Considering the time resolution of Kp, the correlation is found to be quite close but dependent on season. An estimate of the overall shape and position of the low-energy boundary within this region of the magnetosphere as a function of Kp is found by using a fit to the authors' winter data correlation in conjunction with a fit of data presented by Carpenter (1967) concerning the Kp-related radial positioning of the plasmapause boundary in the postmidnight region. This analysis results in a spiral structure, the scale of which depends on Kp.

Mauk, B. H.↗

In-harbor and at-sea electromagnetic compatibility survey for maritime satellite L-band shipboard terminal

Geostationary maritime satellites, one over the Pacific and one over the Atlantic Ocean, are planned to make available high-speed communications and navigation (position determination) services to ships at sea. A shipboard satellite terminal, operating within the authorized maritime L-band, 1636.5 to 1645.0 MHz, will allow ships to pass voice, teletype, facsimile, and data messages to shore communication facilities with a high degree of reliability. The shore-to-ship link will also operate in the maritime L-band from 1535.0 to 1543.5 MHz. A significant number or maritime/commercial ships are expected to be equipped with an L-band satellite terminal by the year 1980, and so consequently, there is an interest in determining electromagnetic compatibility between the proposed L-band shipboard terminal and existing, on-board, shipboard communications/electronics and electrical systems, as well as determining the influence of shore-based interference sources. The shipboard electromagnetic interference survey described was conducted on-board the United States Line's American Leader class (15,690 tons) commercial container ship, the "American Alliance" from June 16 to 20, 1974. Details of the test plan and measurements are given.

Source record↗

Investigation of transient earth resources phenomena: Continuation study

Calculated sensitivity requirements for an earth resource satellite in a geostationary orbit are reported. Radiance levels at the satellite sensor were computed for twenty top-priority Synchronous Earth Observatory Satellite (SEOS) applications. The observation requirements were reviewed and re-evaluated in terms of spectral band definition, spectral signatures of targets and backgrounds, observation time, and site location. With these data and an atmospheric attenuation and scattering model, the total radiances observed by the SEOS sensor were calculated as were the individual components contributed by the target, target variations, and the atmosphere.

Goldman, G. C.↗

NOAA requirements and programs

Service programs in NOAA that contemplate using the Geostationary Operational Environmental Satellite (GEOS) Data Collection System (DCS) are considered. The GEOS DCS will be operated by the National Environmental Satellite Service of NOAA as an integral part of the national operation environmental satellite program. This plan is concerned with that part of the GEOS program connected with collection and relay of data from remote locations. Service programs include: (1) hydrological data collection; (2) oceanographic data collection; (3) marine observations from data buoys; (4) Tsunami warning service; and (5) meteorological service.

Flanders, A. F.↗

Orbit-spectrum sharing between the fixed-satellite and broadcasting-satellite services with applications to 12 GHz domestic systems

A systematic, tutorial analysis of the general problem of orbit-spectrum sharing among inhomogeneous satellite system is presented. Emphasis is placed on extrapolating and applying the available data on rain attenuation and on reconciling differences in the results of various measurements of the subjective effects of interference on television picture quality. An analytic method is presented for determining the approximate values of the intersatellite spacings required to keep mutual interference levels within prescribed limits when many dissimilar satellites share the orbit. A computer model was developed for assessing the interference compatibility of arbitrary configurations of large numbers of geostationary satellite systems. It is concluded that the band from 11.7 c GHz can be shared effectively by broadcasting-satellite and fixed-satellite systems. Recommendations for future study are included.

Reinhart, E. E.↗

Wind estimates from cloud motions: Phase 1 of an in situ aircraft verification experiment

An initial experiment was conducted to verify geostationary satellite derived cloud motion wind estimates with in situ aircraft wind velocity measurements. Case histories of one-half hour to two hours were obtained for 3-10km diameter cumulus cloud systems on 6 days. Also, one cirrus cloud case was obtained. In most cases the clouds were discrete enough that both the cloud motion and the ambient wind could be measured with the same aircraft Inertial Navigation System (INS). Since the INS drift error is the same for both the cloud motion and wind measurements, the drift error subtracts out of the relative motion determinations. The magnitude of the vector difference between the cloud motion and the ambient wind at the cloud base averaged 1.2 m/sec. The wind vector at higher levels in the cloud layer differed by about 3 m/sec to 5 m/sec from the cloud motion vector.

Hasler, A. F.↗

Results of the 3 November 1974 Applications Technology Satellite-6 (ATS-6) trilateration test

The highly successful 24 hour trilateration tracking and orbit determination test conducted on 3 November 1974 is described. In this test a new method of accurately computing geostationary spacecraft orbits was applied to the Applications Technology Satellite (ats-6). A single tracking station interrogates several strategically deployed ground based transponders via the synchronous satellite whose orbit is to be determined. The ATS-6 tracking data measurement noise over the 24 hour period was observed to be 0.3 mm/sec in range rate and 1.5 meters in range. By means of overlap orbit computation using 2 separate tracking data bases, the ATS-6 total position and velocity uncertainties were determined to reach a minimum of 30 meters and 0.2 cm/sec respectively. The maximum position and velocity uncertainty over this same time period was determined to be approximately 250 meters and 2 cm/sec respectively. A position determination using simultaneous tracking of the NASA-GSFC site by ATS-6 and ATS-3 was also performed. Station location recovery was to an accuracy on the order of 100 meters over the first 10 hours of tracking.

Schmid, P. E.↗

Plasmaspheric effects on one way satellite timing signals

The effects of the ionospheric retardation of satellite-emitted timing signals was presented. The retardation at the navigation frequencies, which is proportional to the total ionospheric electron content (TEC), was determined by Faraday polarization measurements of VHF emissions of a geostationary satellite. The polarization data yielded TEC up to approximately 1200 km only, since the measurement technique is based on the Faraday effect which is weighted by the terrestrial magnetic field.

Gorman, F. J., Jr.↗

L-band, 1.2 m parabolic antenna-noise temperature measurement

Extensive antenna-noise temperature measurements at 1.6 GHz (L-band) were made using a 1.2 m (4 ft. diameter) parabolic dish antenna mounted on the flying bridge of a modern 15,690-ton, commercial-container ship. Both in-harbor and at-sea radiometer measurements were made that indicated a steady background, antenna-noise temperature value slightly less than 70 degrees Kelvin (K) at elevation angles of 5 percent, and greater, at 1.6 GHz. A comparison of theoretical and measured values indicate excellent agreement within about 5K for at-sea data. These measurements are helpful to RF equipment designers of maritime, L-band shipboard terminals for operation with the two, geostationary, maritime satellites, Marisat-A and -B.

Taylor, R. E.↗

High power ferrite microwave switch

A high power ferrite microwave switch was developed along with associated electronic driver circuits for operation in a spaceborne high power microwave transmitter in geostationary orbit. Three units were built and tested in a space environment to demonstrate conformance to the required performance characteristics. Each unit consisted of an input magic-tee hybrid, two non-reciprocal latching ferrite phase shifters, an out short-slot 3 db quadrature coupler, a dual driver electronic circuit, and input logic interface circuitry. The basic mode of operation of the high power ferrite microwave switch is identical to that of a four-port, differential phase shift, switchable circulator. By appropriately designing the phase shifters and electronic driver circuits to operate in the flux-transfer magnetization mode, power and temperature insensitive operation was achieved. A list of the realized characteristics of the developed units is given.

Bardash, I.↗