Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GaN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Origin of reduced efficiency in GaN-based micro-LEDs studied by scanning near-field optical microscopy

The quantum efficiency of micro-light emitting diodes (micro-LEDs) is lower than that of large area LEDs. This efficiency reduction is typically attributed to the nonradiative Shockley–Read–Hall recombination at the surface defects and current leakage through the sidewall region without a clear distinction between these effects. In this work, we attempt to find out which of these phenomena is most critical for the reduced efficiency of micro-LEDs. This has been done by mapping electroluminescence (EL) and photoluminescence (PL) and measuring PL dynamics in blue GaN micro-LEDs fabricated by dry etching. It has been found that in the as-etched device, the EL intensity is much lower than in devices with KOH etching and atomic layer deposition of SiO 2 . This effect is especially pronounced close to the sidewalls. On the other hand, PL decay times are similar in as-etched and passivated devices, both in their center and at the sidewalls. This allows concluding that the main mechanism of the reduced efficiency of micro-LEDs fabricated by dry etching is the current leakage in the sidewall region and not the nonradiative recombination. The KOH etching has been found to be the most efficient means to eliminate the current leakage.

36 MATERIALS SCIENCE↗

Application of the bond valence method in the non-isovalent semiconductor alloy (GaN) 1–x (ZnO) x

This paper studies the bond valence method (BVM) and its application in the non-isovalent semiconductor alloy (GaN) 1-x (ZnO) x . Particular attention is paid to the role of short-range order (SRO). A physical interpretation based on atomic orbital interaction is proposed and examined by density-functional theory (DFT) calculations. Combining BVM with Monte-Carlo simulations and a DFT-based cluster expansion model, bond-length distributions and bond-angle variations are predicted. The correlation between bond valence and bond stiffness is also revealed. Lastly the concept of bond valence is extended into the modelling of an atomistic potential.

36 MATERIALS SCIENCE↗

Fabrication and field emission properties of vertical, tapered GaN nanowires etched via phosphoric acid

The controlled fabrication of vertical, tapered, and high-aspect ratio GaN nanowires via a two-step top-down process consisting of an inductively coupled plasma reactive ion etch followed by a hot, 85% H 3 PO 4 crystallographic wet etch is explored. The vertical nanowires are oriented in the $[0001]$ direction and are bound by sidewalls comprising of $\{33\bar{6}2\}$ semipolar planes which are at a 12° angle from the [0001] axis. High temperature H3PO4 etching between 60 °C and 95 °C result in smooth semipolar faceting with no visible micro-faceting, whereas a 50 °C etch reveals a micro-faceted etch evolution. High-angle annular dark-field scanning transmission electron microscopy imaging confirms nanowire tip dimensions down to 8–12 nanometers. The activation energy associated with the etch process is 0.90 ± 0.09 eV, which is consistent with a reaction-rate limited dissolution process. The exposure of the $\{33\bar{6}2\}$ type planes is consistent with etching barrier index calculations. The field emission properties of the nanowires were investigated via a nanoprobe in a scanning electron microscope as well as by a vacuum field emission electron microscope. Finally, the measurements show a gap size dependent turn-on voltage, with a maximum current of 33 nA and turn-on field of 1.92 V nm -1 for a 50 nm gap, and uniform emission across the array.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

UV hybrid photon detector based on GaN photocathodes and Si low gain avalanche diode

Photon detectors featuring single-photon sensitivity play a crucial role in various scientific domains, including high-energy physics, astronomy, and quantum optics. Fast response time, high quantum efficiency, and minimal dark counts are the characteristics that render them ideal candidates for detecting individual photons with exceptional signal-to-noise ratios, at frequencies in the range of hundreds of MHz. Here, in this study, we report on our first design and operational results on a Hybrid Photon Detector (HPD) that combines the high quantum efficiency of a Gallium Nitride (GaN) photocathode and the low noise characteristics of a Si-based Low-Gain Avalanche Diode (LGAD). This hybrid detection scheme has the potential to reach single-photon detection sensitivity with high quantum efficiency, low noise levels and capable of operating at hundreds of MHz repetition rates.

47 OTHER INSTRUMENTATION↗

Scatterings and Quantum Effects in ( Al , In ) N / GaN Heterostructures for High-Power and High-Frequency Electronics

Charge transport in the wide-band-gap ( Al , In ) N / GaN heterostructures with high carrier density approximately 2 × 10 13 cm - 2 is investigated over a large range of temperature ( 270 mK ≤ T ≤ 280 K ) and magnetic field ( 0 ≤ B ≤ 18 T ). We observe the first evidence of weak localization in the two-dimensional electron gas in this system. From the Shubnikov–de Haas (SdH) oscillations a relatively light effective mass of 0.23 m e is determined. Furthermore, the linear dependence with temperature ( T < 20 K ) of the inelastic scattering rate ( τ i - 1 ∝ T ) is attributed to the phase breaking by electron-electron scattering. Also in the same temperature range the less-than unit ratio of quantum lifetime to Hall transport time ( τ q / τ t < 1 ) is taken to signify the dominance of small-angle scattering. Above 20 K, with increasing temperature scattering changes from acoustic phonon to optical phonon scattering, resulting in a rapid decrease in carrier mobility and increase in sheet resistance. Furthermore, suppression of such scatterings will lead to higher mobility and a way forward to high-power and high-frequency electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carbon complexes in highly C-doped GaN

We investigate the properties of heavily C-doped GaN grown by hydride vapor phase epitaxy using both optical experiments and hybrid density functional theory calculations. Previous work has established that carbon acceptors (C N ) give rise to a yellow luminescence band near 2.2 eV along with a blue luminescence band near 2.9 eV. Photoluminescence measurements show the yellow band shifting as a function of carbon concentration, suggesting a change in the behavior of carbon species as carbon content increases. With hybrid density functional theory we calculate the electrical and optical behavior of carbon centers containing multiple carbon impurities, which may arise in heavily doped material. We compare the behavior of these complexes to the isolated centers, and find that the dicarbon donor-acceptor (C Ga –C N ) complex is a candidate to explain the shift in the yellow luminescence peak. Tricarbon complexes have high formation energies and modest binding energies, and also give rise to optical transitions that are inconsistent with the observed spectra. We also identify the split dicarbon interstitial on the gallium site as a low-energy species with a large binding energy that may act to compensate carbon acceptors. Here, local vibrational modes are calculated for carbon impurity centers, and we compare these results to recent experiments. Dicarbon and tricarbon complexes involving C Ga and C N exhibit modes that are only slightly higher than the isolated species, while carbon interstitials and related complexes give rise to vibrational modes much higher than C Ga and C N .

36 MATERIALS SCIENCE↗

Quantum dot to quantum wire transition of m-plane GaN islands

Structural studies of m-plane GaN quantum dots and quantum wires are presented. A shape transition responsible for the evolution of quantum dots into quantum wires is put in evidence and shown to depend on the amount of material deposited. In addition, it is established that vertical correlation of successive nanostructure planes may also induce the dot-wire shape transition. Consistent with theoretical predictions, it is proposed that the shape transition results from an elastic energy minimization process made possible by an easy adatom diffusion along [11-20] direction.

36 MATERIALS SCIENCE↗

Ferrimagnetic Fe-Doped GaN: An Unusual Magnetic Phase in Dilute Magnetic Semiconductors

Most dilute magnetic semiconductors exist either in ferromagnetic (e.g., GaAs:Mn) or antiferromagnetic (ZnSe:Mn) phases at low temperature. This alignment persists even after carriers are introduced, although the preference may change as a function of doping. Using first-principles calculations, we found that the stable magnetic phase of GaN:Fe is ferrimagnetic under hole doping, in which the nearest Fe atoms have antiparallel spins with different magnetic moments. This unusual behavior is explained by the Stoner model combined with a band coupling model. Furthermore, the consequences of the formation of the ferrimagnetic phase in diluted magnetic systems are discussed.

36 MATERIALS SCIENCE↗

Metallicity of InN and GaN surfaces exposed to NH{sub 3}.

A systematic study of energies and structures of InN and GaN (0001) surfaces exposed to NH{sub 3} and its decomposition products was performed with first-principles methods. A phenomenological model including electron counting contributions is developed based on calculated DFT energies and is used to identify low-energy structures. These predictions are checked with additional DFT calculations. The equilibrium phase diagrams are found to contain structures that violate the electron counting rule. Densities of states for these structures indicate n-type conductivity, consistent with available experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intervalley energy of GaN conduction band measured by femtosecond pump-probe spectroscopy

Time-resolved transmission and reflection measurements were performed for bulk GaN at room temperature to evaluate the energy of the first conduction band satellite valley. From this, the measurements showed clear threshold-like spectra for transmission decay and reflection rise times. The thresholds were associated with the onset of the intervalley electron scattering. Transmission measurements with pump and probe pulses in the near infrared produced an intervalley energy of 0.97 ± 0.02 eV. Ultraviolet pump and infrared probe reflection provided a similar value. Comparison of the threshold energies obtained in these experiments allowed estimating the hole effective mass in the upper valence band to be 1.4m 0 .Modeling of the reflection transients with rate equations has allowed estimating electron–LO (longitudinal optical) phonon scattering rates and the satellite valley effective mass.

36 MATERIALS SCIENCE↗

Resonant optical spectroscopy and coherent control of C r 4 + spin ensembles in SiC and GaN

Spins bound to point defects are increasingly viewed as an important resource for solid-state implementations of quantum information technologies. In particular, there is a growing interest in the identification of new classes of defect spin that can be controlled optically. Here we demonstrate ensemble optical spin polarization and optically detected magnetic resonance (ODMR) of the S = 1 electronic ground state of chromium (Cr 4+ ) impurities in silicon carbide (SiC) and gallium nitride (GaN). Polarization is made possible by the narrow optical linewidths of these ensembles (< 8.5 GHz), which are similar in magnitude to the ground state zero-field spin splitting energies of the ions at liquid helium temperatures. We therefore are able to optically resolve individual spin sublevels within the ensembles at low magnetic fields using resonant excitation from a cavity-stabilized, narrow-linewidth laser. Additionally, these near-infrared emitters possess exceptionally weak phonon sidebands, ensuring that > 73% of the overall optical emission is contained with the defects’ zero-phonon lines. Lastly, these characteristics make this semiconductor-based, transition metal impurity system a promising target for further study in the ongoing effort to integrate optically active quantum states within common optoelectronic materials.

36 MATERIALS SCIENCE↗

Quasiparticle and hybrid density functional methods in defect studies: An application to the nitrogen vacancy in GaN

Defects in semiconductors can play a vital role in the performance of electronic devices, with native defects often dominating the electronic properties of the semiconductor. Understanding the relationship between structural defects and electronic function will be central to the design of new high-performance materials. In particular, it is necessary to quantitatively understand the energy and lifetime of electronic states associated with the defect. In this work, we apply first-principles density functional theory (DFT) and many-body perturbation theory within the GW approximation to understand the nature and energy of the defect states associated with a charged nitrogen vacancy on the electronic properties of gallium nitride (GaN), as a model of a well-studied and important wide gap semiconductor grown with defects. We systematically investigate the sources of error associated with the GW approximation and the role of the underlying atomic structure on the predicted defect state energies. Additionally, analysis of the computed electronic density of states (DOS) reveals that there is one occupied defect state 0.2 eV below the valence band maximum and three unoccupied defect states at energy of 0.2–0.4 eV above the conduction band minimum, suggesting that this defect in the +1 charge state will not behave as a carrier trap. Furthermore, we compare the character and energy of the defect state obtained from GW and DFT using the HSE approximate density functional and find excellent agreement. This systematic study provides a more complete understanding of how to obtain quantitative defect energy states in bulk semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Piezoelectric Electron-Phonon Interaction from Ab Initio Dynamical Quadrupoles: Impact on Charge Transport in Wurtzite GaN

First-principles calculations of $\textit{e}$-ph interactions are becoming a pillar of electronic structure theory. However, the current approach is incomplete. The piezoelectric (PE) $\textit{e}$-ph interaction, a long-range scattering mechanism due to acoustic phonons in noncentrosymmetric polar materials, is not accurately described at present. Current calculations include short-range $\textit{e}$-ph interactions (obtained by interpolation) and the dipolelike Frölich long-range coupling in polar materials, but lack important quadrupole effects for acoustic modes and PE materials. Here we derive and compute the long-range $\textit{e}$-ph interaction due to dynamical quadrupoles, and apply this framework to investigate $\textit{e}$-ph interactions and the carrier mobility in the PE material wurtzite GaN. In this work, we show that the quadrupole contribution is essential to obtain accurate $\textit{e}$-ph matrix elements for acoustic modes and to compute PE scattering. Our work resolves the outstanding problem of correctly computing $\textit{e}$-ph interactions for acoustic modes from first principles, and enables studies of $\textit{e}$-ph coupling and charge transport in PE materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combined structure-factor phase measurement and theoretical calculations for mapping of chemical bonds in GaN

For non-centrosymmetric crystals, the refinement of charge-density maps requires highly accurate measurements of structure-factor phase, which can now be obtained using the extinction-free convergent-beam electron microdiffraction method. We report here accurate low-order structure-factor phases and amplitudes for gallium nitride (GaN) in the wurtzite structure. The measurement accuracy is up to 0.1% for amplitude and 0.2 for phases. By combining these with high-order structure factors from electronic structure calculation, charge-density maps were obtained. Fine bonding features suggest that the Ga—N bonds are polar and covalent, with charge transfer from Ga to N; however, the polarity effect is extremely small.

36 MATERIALS SCIENCE↗

Comparison of Si, SiC, and GaN based Isolation Converters for Onboard Charger Applications

This paper presents a comparison of isolation converters based on Si, SiC, or GaN switching devices for level-2 integrated onboard chargers. The isolation converters all employ a dual active bridge for bidirectional power flow for the charger and a buck converter tapped off the same transformer for powering the 14V vehicle loads. Design trade-offs and operating constraints are discussed and performance metrics in terms of efficiency and power density and experimental results are included.

Su, Gui-Jia↗

Analysis of a GaN-Based CRM Totem-Pole PFC Converter Considering Current Sensing Delay

High-frequency soft-switched gallium-nitride (GaN) based critical conduction mode (CRM) totem-pole power factor correction (PFC) converter is one of the most potential candidates in data center power supplies. However, the high-speed cycle-by-cycle zero current detection (ZCD) brings challenges to zero-voltage-switching (ZVS) control. Current sensing delay (CSD) exists, and the ZCD circuit is sensitive to high di/dt switching noise. In this paper, mechanisms of the ZCD time error are elaborated, and impacts of the current sensing delay on converter switching frequency, inductor current, input current third harmonic distortion (THD), and power loss are analyzed. Qualification time is added within the controller for immunity to the swiching noise, and a CSD embedded converter model is proposed to compensate the ZCD time delay. Also, loss modeling of the CRM totem-pole PFC is conducted to aid in analysis of the proposed theory. A 1.5 kW single-phase CRM totem-pole PFC prototype is tested. Experimental results validiate the analysis, modeling, and the proposed compensation method for current sensing delay.

Sun, Jingjing↗

A GaN-Based Active Power Decoupling Approach for Enhancing the Efficiency and Reliability of Residential PV Microinverters

It is a common sense that, the reliability of a system is dictated by the life-time of its weakest component. In terms of a single-phase solar photovoltaic (PV) system, including PV panel and the microinverter, the reliability of the system is confined by the electrolytic dc-link capacitor at the input of its microinverter. To enhance the reliability of the system by providing the possibility of employing film capacitors, with higher life-time rather than their electrolytic counterparts, this paper presents a novel modeling, design, and control of a PV-side active power decoupling (APD) approach. Besides, GaN FETs are employed to achieve a superior efficiency and power density of the APD. The proposed methodology is verified through a thorough design, loss modeling, and numerical analysis.

14 SOLAR ENERGY↗

Constrained GAN-Generated X-Ray CT Data For Self-Supervised And Foundation-Model Segmentation Of Concrete Microstructures

Three-dimensional characterization of materials using X-ray computed tomography (XCT) is challenging due to the complexity of internal structures, noise, and variations in resolution. Traditional computer vision models often struggle to accurately segment these images, particularly in domain-specific applications like materials science. While supervised deep learning approaches have been developed to address the limitations of conventional algorithms, they typically require large amounts of labeled training data and often fail to generalize across different datasets. Self-supervised, few-and zero-shot learning methods have gained prominence in natural image processing and segmentation tasks, but their application to scientific imaging remains limited due to the unique structural complexity, noise, and textural artifacts present in materials science data. In this work, we investigate how domain adaptation, leveraging physics-based and GAN-generated synthetic data, impacts segmentation performance. We introduce a modified Contrastive Unpaired Translation (CUT) model designed to generate realistic labeled data, which can be used for training, pre-training, and fine-tuning segmentation models for real XCT microstructure data. We evaluate the performance of two segmentation approaches: a self-supervised network (SSL-ALPNet) and a foundation model (Segment Anything Model), assessing their improvements when pre-trained and/or fine-tuned on the synthesized data. Our results demonstrate that leveraging synthetic data significantly enhances segmentation performance, particularly in challenging materials science applications.

Ziabari, Amir [ORNL] (ORCID:000000034776457X)↗