Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRAPHITIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Examination of the solidification macrostructure of spheroidal and flake graphite cast irons using DAAS and ESBD

This investigation focuses on the study of the solidification macrostructure of sand cast flake and spheroidal graphite cast irons. The macrostructure is revealed by using a special technique developed earlier by the authors, called Direct Austempering After Solidification. The observations make use of conventional metallography and Electron Back Scattering Diffraction. The latter technique allows a more detailed observation of the morphology of the austenite grains and the microstructure of the matrix. The results of Electron Back Scattering Diffraction validate the observations made using the macrographic technique. It is verified that the solidification of both flake and spheroidal graphite cast irons is dominated by the growth of large austenite dendrites that form a grain pattern similar to that usually found in most metallic alloys.

36 MATERIALS SCIENCE↗

Anisotropy in thermal conductivity of graphite flakes–SiC{sub p}/matrix composites: Implications in heat sinking design for thermal management applications

Within the frame of heat dissipation for electronics, a very interesting family of anisotropic composite materials, fabricated by liquid infiltration of a matrix into preforms of oriented graphite flakes and SiC particles, has been recently proposed. Aiming to investigate the implications of the inherent anisotropy of these composites on their thermal conductivity, and hence on their potential applications, materials with matrices of Al–12 wt.% Si alloy and epoxy polymer have been fabricated. Samples have been cut at a variable angle with respect to the flakes plane and thermal conductivity has been measured by means of two standard techniques, namely, steady state technique and laser flash method. Experimental results are presented and discussed in terms of current models, from which important technological implications for heat sinking design can be derived. - Highlights: • Anisotropy in thermal conductivity of graphite flakes-based composites is evaluated. • Samples are cut in a direction forming a variable angle with the oriented flakes. • For angles 0° and 90°, thermal conductivity does not depend on sample geometry. • For intermediate angles, thermal conductivity strongly depends on sample geometry. • “Thin” samples must be thicker than 600 μm, “thick” samples must be encapsulated.

36 MATERIALS SCIENCE↗

Preparation and characterization of low-temperature expandable graphite

The low-temperature expandable graphite was successfully prepared with perchloric acid, phosphoric acid and KMnO{sub 4} by chemical process. The optimum weight ratio of perchloric acid to phosphoric acid in mixed acid was 1:0.2, and the weight ratio of the mixed acid, KMnO{sub 4} and natural flake graphite was preferably 1.5:0.1:1. The expanded volume can reach 260 mL/g at a relatively low temperature of 300 deg. C. Meanwhile, the prepared samples were characterized by means of Fourier transform infrared, thermogravimetry-differential scanning calorimetry and X-ray diffraction.

36 MATERIALS SCIENCE↗

Well-crystallized nitrogen-rich graphitic carbon nitride nanocrystallites prepared via solvothermal route at low temperature

A solvothermal method has been successfully applied to prepare crystalline carbon nitride from C{sub 3}N{sub 3}Cl{sub 3} and NaN{sub 3} in CCl{sub 4} at 180 deg. C without any catalyst. The final product was a reddish brown powder. X-ray diffraction pattern indicated that the prepared powder was well-crystallized graphitic carbon nitride. The atomic N/C ratio determined by combustion method was 1.63, indicating a high nitrogen concentration. XPS and FTIR studies showed that graphite-like sp{sup 2} bonded structure existed in the sample. Nanometer scale spherical particles and crinkly lamellas were found in the TEM morphologies.

36 MATERIALS SCIENCE↗

Graphite oxide-mediated synthesis of porous CeO{sub 2} quadrangular prisms and their high-efficiency adsorptive performance

Graphical abstract: - Highlights: • Porous CeO{sub 2} quadrangular prisms have been prepared via graphite oxide-mediated synthesis. • Dual-pore hierarchical systems are formed with the pore distributions around 4 nm and 30 nm. • Porous CeO{sub 2} exhibits a rapid adsorption to Rhodamine B with a removal efficiency of ∼99%. • Porous CeO{sub 2} retains the same performances in different pH solutions. - Abstract: We report a graphite oxide-mediated approach for synthesizing porous CeO{sub 2} through a facile hydrothermal process followed by thermal annealing in air. The phase structure, morphology, microstructure and porosity of the products have been revealed by a combination of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and N{sub 2} adsorption. The as-prepared CeO{sub 2} products show well-defined quadrangular prism morphology, and they are composed of interconnected nanoparticles with diameters around 30–100 nm. In particular, the dual-pore hierarchical systems are created in the CeO{sub 2} quadrangular prisms with the pore distributions around 4 nm and 30 nm. The dye sorption capacity of the porous CeO{sub 2} is investigated, which exhibits a rapid adsorption to rhodamine B with a high removal efficiency of ∼99%. Moreover, the CeO{sub 2} absorbent retains the same performances in different pH solutions.

36 MATERIALS SCIENCE↗

Nickel doped graphitic carbon nitride nanosheets and its application for dye degradation by chemical catalysis

Highlights: • Nickel doped Graphitic carbon nitride (GCN) was synthesized chemically. • Mott-Schottky was done to calculate the flat band potentials and donor densities of pure and doped samples. • Toxic Methyl Orange dye was degraded efficiently by doped samples in the presence of NaBH{sub 4} accompanied by hydrogen evolution. • Enhancement of catalytic activity with increasing doping concentration was studied in presence of varying amount of NaBH{sub 4}. • A plausible mechanism for catalytic degradation was discussed in details. - Abstract: A facile synthesis of transition metal-nickel doped graphitic carbon nitride (NiGCN) nanosheets with varying doping concentrations has been reported. X-Ray diffraction and Fourier transformed infrared spectroscopic study were performed to analyse the structural phase formation and different bonds present in the samples, whereas, field emission and transmission electron microscopic study provided the morphological information. The thermal stability of the samples was measured from the TG-DTA analysis. Photoluminescence spectroscopy was performed to elucidate the emissive property of the samples. The flat band potential of the samples was measured by Mott-Schottky analysis. First principle study was carried out to delineate the probable doping site of the Ni atom along with the effect of doping on the pure material. The samples were effectively utilized to degrade toxic methyl orange (MO) dye from water in the presence of sodium borohydride (NaBH{sub 4}) without exploiting any visible light source. The plausible catalysis mechanism following a series of several chemical reactions has been discussed in details.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Damage tolerance in the graphite cores of UK power reactors and implications for new build

The United Kingdom has been operating graphite-moderated gas-cooled commercial nuclear power reactors for more than 60 years. Both Generation I Magnox reactors and Generation II Advanced Gas-cooled Reactors have operated beyond their nominal design lifetimes and the safety cases for continued operation have had to address the issue of damage tolerance of the graphite cores. This review describes the designs of the reactors and the methodologies employed for their assessment. Emerging issues arising from extended operation and ageing of the cores are discussed together with the evolution of assessment methodologies to address predicted and observed damage. The UK nuclear regulator perspective is summarised and some conclusions are drawn on the implications for new build.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Simulated laser-induced breakdown spectra of graphite and synthetic shergottite glass under Martian conditions

We report the results of a simulation of the laser-induced breakdown spectra of graphite and synthetic shergottite glass in an atmosphere similar to that of Mars using a 1-D, Lagrangian hydrodynamic model, a spherical geometry description of the laser ablation and plume expansion and a local thermodynamic equilibrium (LTE) approach for the emission spectra. We compare the LIBS spectra of two calibration targets on board of the Curiosity rover to the simulated ones calculated under nominally the same conditions as those encountered on Mars. The simulations provide an additional way, to laboratory based comparative studies, to better understand the effects of laser parameters and atmospheric pressures. We report on the effect of laser irradiance and ambient pressure on the electron and ion temperature, electron number density, and fluid velocity parameters characterizing the plasma. Lastly, we show the effects of laser irradiance and ambient pressure on the simulated emission spectra of graphite and shergottite and compare them to those acquired by ChemCam. The agreement between the two is good, particularly for the prominent emission lines.

74 ATOMIC AND MOLECULAR PHYSICS↗

Rapid Production of Graphite Without Contamination for Biomedical AMS

The application of AMS to the detection of 14 C makes possible a new class of sensitive experiments in molecular biology. Such experiments inherently produce large numbers of samples for the determination of biological variability in molecular interactions. The samples vary in 14 C concentration over many orders of magnitude. We added TiH 2 to aid the reduction of CO 2 by zinc in a sealed tube to reproducibly make graphite without sample cross-contamination. The CO 2 is transferred from a combustion tube to the reaction tube through a disposable plastic manifold. The sealed tubes are heated to a single-reaction temperature in a muffle furnace. The process is complete within 5 h. Bulk isotopic fractionation in the finished graphite is less than 0.5%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrolyte volume effects on electrochemical performance and solid electrolyte interphase in Si-graphite/NMC lithium-ion pouch cells

This study aims to explore the correlations between electrolyte volume, electrochemical performance, and properties of the solid electrolyte interphase in pouch cells with Si-graphite composite anodes. The electrolyte is 1.2 M LiPF 6 in ethylene carbonate:ethylmethyl carbonate with 10 wt.% fluoroethylene carbonate. Single layer pouch cells (100 mAh) were constructed with 15 wt.% Si-graphite/LiNi 0.5 Mn 0.3 CO 0.2 O 2 electrodes. It is found that a minimum electrolyte volume factor of 3.1 times the total pore volume of cell components (cathode, anode, and separator) is needed for better cycling stability. Less electrolyte causes increases in ohmic and charge transfer resistances. Lithium dendrites are observed when the electrolyte volume factor is low. The resistances from the anodes become significant as the cells are discharged. As a result, solid electrolyte interphase thickness grows as the electrolyte volume factor increases and is non-uniform after cycling.

25 ENERGY STORAGE↗

Chemical Evolution in Silicon–Graphite Composite Anodes Investigated by Vibrational Spectroscopy

Silicon–graphite composites are under development for the next generation of high-capacity lithium-ion anodes, and vibrational spectroscopy is a powerful tool to identify the different mechanisms that contribute to performance loss. With alloy anodes, the underlying causes of cell failure are significantly different in half-cells with lithium metal counter electrodes compared to full cells with standard cathodes. However, most studies which take advantage of vibrational spectroscopy have only examined half-cells. In this work, a combination of FTIR and Raman spectroscopy describes several factors that lead to degradation in full pouch cells with LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) cathodes. The spectroscopic signatures evolve after longer term cycling compared to the initial formation cycles. Several side-reactions that consume lithium ions have clear FTIR signatures, and comparison to a library of reference compounds facilitates identification. Raman microspectroscopy combined with mapping shows that the composite anodes are not homogeneous but segregate into graphite-rich and silicon-rich phases. Lithiation does not proceed uniformly either. A basis analysis of Raman maps identifies electrochemically inactive regions of the anodes. In conclusion, the spectroscopic results presented here emphasize the importance of improving electrode processing and SEI stability to enable practical composite anodes with high silicon loadings.

25 ENERGY STORAGE↗

Highly Graphitic Mesoporous Fe,N-Doped Carbon Materials for Oxygen Reduction Electrochemical Catalysts

The synthesis, characterization, and electrocatalytic properties of mesoporous carbon materials doped with nitrogen atoms and iron are reported and compared for the catalyzed reduction of oxygen gas at fuel cell cathodes. Mixtures of common and inexpensive organic precursors, melamine, and formaldehyde were pyrolyzed in the presence of transition-metal salts (e.g., nitrates) within a mesoporous silica template to yield mesoporous carbon materials with greater extents of graphitization than those of others prepared from small-molecule precursors. In particular, Fe,N-doped carbon materials possessed high surface areas (~800 m 2 /g) and high electrical conductivities (~19 S/cm), which make them attractive for electrocatalyst applications. The surface compositions of the mesoporous Fe,N-doped carbon materials were postsynthetically modified by acid washing and followed by high-temperature thermal treatments, which were shown by X-ray photoelectron spectroscopy to favor the formation of graphitic and pyridinic nitrogen moieties. Such surface-modified materials exhibited high electrocatalytic oxygen reduction activities under alkaline conditions, as established by their high onset and half-wave potentials (1.04 and 0.87 V, respectively vs reversible hydrogen electrode) and low Tafel slope (53 mV/decade). These values are superior to many similar transition-metal- and N-doped carbon materials and compare favorably with commercially available precious-metal catalysts, e.g., 20 wt % Pt supported on activated carbon. As a result, the analyses indicate that inexpensive mesoporous Fe,N-doped carbon materials are promising alternatives to precious metal-containing catalysts for electrochemical reduction of oxygen in polymer electrolyte fuel cells.

36 MATERIALS SCIENCE↗

Sublimation Kinetics for Individual Graphite and Graphene Nanoparticles (NPs): NP-to-NP Variations and Evolving Structure-Kinetics and Structure-Emissivity Relationships

A single nanoparticle (NP) mass spectrometry method was used to measure sublimation rates as a function of nanoparticle temperature (T NP ) for sets of individual graphite and graphene NPs. Initially, the NP sublimation rates were ~400 times faster than that for bulk graphite, and there were large NP-to-NP variations. Over time, the rates slowed substantially, though remaining well above the bulk rate. The initial activation energies (E a values) were correspondingly low and doubled as a few monolayer’s worth of material were sublimed from the surfaces. The high initial rates and low E a values are attributed to large numbers of edge, defect, and other low coordination sites on the NP surfaces, and the changes are attributed to atomic-scale “smoothing” of the surface by preferential sublimation of the less stable sites. The emissivity of the NPs also changed after heating, most frequently increasing. Here, the emissivity and sublimation rates were anti-correlated, leading to the conclusion that high densities of low-coordination sites on the NP surfaces enhances sublimation but suppresses emissivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oriented graphite layer formation in Ti/C and TiC/C multilayers deposited by high current pulsed cathodic arc

Ti/C and TiC/C multilayers with periods ranging from 2 to 18 nm were grown by filtered high current pulsed cathodic arc. The growth was monitored in situ by ellipsometry and cantilever stress measurements. The ellipsometry results reveal that the optical properties of the carbon vary as a function of thickness. Correspondingly, the stress in each carbon layer as measured in situ exhibits two well defined values: initially the stress is low and then takes on a higher value for the remainder of the layer. Transmission electron microscopy shows that the initial growth of carbon on Ti or TiC layer is oriented with graphitic basal planes aligned parallel to the interface. After 2-4 nm of growth, the graphitic structure transforms to amorphous carbon. Electron energy loss spectroscopy shows that the carbon layer simultaneously undergoes a transition from sp{sup 2} rich to sp{sup 3} rich material.

36 MATERIALS SCIENCE↗

Caesium Free Negative Ion Sources for Neutral Beam Injectors: a Study of Negative Ion Production on Graphite Surface in Hydrogen and Deuterium Plasma

Negative ion generation on HOPG graphite surface has been studied in hydrogen and deuterium plasma. We measure Ion Distribution Function (IDF) of negative ions coming from graphite surface bombarded by positive ions in H{sub 2}/D{sub 2} plasmas. We showed that negative ions flux was proportional to positive ion flux and was strongly dependant on impinging energy. IDF study shows two generation mechanisms are involved: sputtering of adsorbed H/D as negative ions and, in a less important way, double electron capture. We compare H{sub 2}/D{sub 2} plasmas, and point out isotopic effect between H{sup -} and D{sup -} production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temperature-dependent H{sub 2} gas-sensing properties of fabricated Pd nanowires using highly oriented pyrolytic graphite

Horizontal palladium (Pd) nanowires and Pd nanoparticles were successfully fabricated directly on highly oriented pyrolytic graphite depending on the electrodeposition time using palladium nitrate [Pd(NO{sub 2}){sub 3}] solution at room temperature, and the temperature-dependent hydrogen (H{sub 2}) sensing properties of these structures were investigated in the concentration range of 50-5000 ppm. Pd nanowires and Pd nanoparticles were fabricated on a graphite surface by applying triple-pulsed potential with varying the electrodeposition time from 400 to 600 s. The fabricated Pd nanowires were characterized by scanning electron microscopy and energy-dispersive x-ray spectroscopy. It was found that the nanowire arrays were continuous, parallel to each other and ordered after an electrodeposition time of 600 s. The diameters of the Pd nanowires and Pd nanoparticles are observed in the range of 70-180 nm. The H{sub 2} sensing properties of these structures were determined with variation in resistance measurements. It was observed that the limit of detection is lower than 50 ppm H{sub 2}, the sensor response was approximately 2% for 1000 ppm H{sub 2} at room temperature, and the sensor response was decreased with increasing temperature.

36 MATERIALS SCIENCE↗

Growth Of Graphitic Polyhedra, SiC Platelets, And Carbon Nanotubes Filled With SiC Nanowires By Laser Ablation

Three characteristic silicon/carbon nanostructures, i.e., graphitic polyhedral (GP) particles, silicon carbide (SiC) platelets, and carbon nanotubes (CNTs) filled with SiC nanowires, were synthesized by the laser ablation of Si-C targets in the presence of high-pressure Ar gas up to 0.9 MPa. The growth of nanostructures was controlled merely by adjusting the Si content in graphite and the ambient Ar gas pressure. Deposits containing GP particles were purified by heat treatment at 550 deg. C in a pure oxygen atmosphere for 1 h. CNTs filled with SiC nanowires were grown without a catalyst. Unlike previous studies of CNTs filled with metals or compounds, all the CNTs checked by transmission electron microscopy contained SiC nanowires and no unfilled CNTs were produced. We discuss the growth mechanisms of the three nanostructures.

36 MATERIALS SCIENCE↗

Generation of an amorphous graphite substrate by cumulative deuterium bombardment using molecular dynamics with full nonbonded interactions

A deuterated amorphous carbon target is generated from a fresh graphite layer via hyperthermal irradiation with deuterium ions using molecular dynamics (MD) simulations. We use interatomic potentials that include nonbonded (long-range) interactions for maximum accuracy and simulate cumulative bombardment up to doses of 5.80 x 10{sup 16} ions cm{sup -2} at 1000 K. The graphite target goes through several stages of erosion and swelling, leading to complete amorphization and significant density loss. The calculations show a transition from graphitelike hybridization to a mixture of diamondlike and linear hybridizations with dose. It is concluded that the current sample sizes obtained directly by cumulative irradiation affordable with MD are not sufficiently large to be used for sputtering calculations under steady-state conditions.

36 MATERIALS SCIENCE↗