Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GAS CHROMATOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Research and Development of Non-Spectroscopic MEMS-Based Sensor Arrays for Targeted Gas Detection

The ability to monitor the integrity of gas volumes is of interest to the stockpile surveillance community. Specifically, the leak detection of noble gases, at relevant concentration ranges and distinguished from other chemical species that may be simultaneously present, is particularly challenging. Aside from the laboratory-based method of gas chromatography-mass spectrometry (GC-MS), where samples may be collected by solid-phase microextraction (SPME) or cryofocusing, the other major approaches for gas-phase detection employ lasers typically operating in the mid-infrared wavelength region. While mass spectrometry can readily detect noble gases - the helium leak detector is an obvious example - laser-based methods such as infrared (IR) or Raman spectroscopy are completely insensitive to them as their monatomic nature precludes a non-zero dipole moment or changes in polarizability upon excitation.

47 OTHER INSTRUMENTATION↗

Valorisation of forestry waste by pyrolysis in an auger reactor

Pyrolysis of forestry waste has been carried out in an auger reactor to study the influence of operational variables on the reactor performance and the properties of the related products. Pine woodchips were used for the first time as raw material and fed continuously into the reactor. Ten experiments were carried out under inert atmosphere at: (i) different reaction temperature (1073, 973, 873, 823 and 773 K); (ii) different solid residence time (5, 3, 2 and 1.5 min); and (iii) different biomass flow rate (3.9, 4.8 and 6.9 kg/h). Results show that the greatest yields for liquid production (59%) and optimum product characterisation were obtained at the lowest temperature studied (773 K) and applying solid residence times longer than 2 min. Regarding bio-oil properties, GC/MS qualitative identification show that the most abundant compounds are volatile polar compounds, phenols and benzenediols; and very few differences can be observed among the samples regardless of the pyrolysis operating conditions. On the whole, experimental results demonstrate that complete reaction of forest woodchips can be achieved in an auger reactor in most of the experimental conditions tested. Moreover, this study presents the initial steps for the future scaling up of the auger reactor with the aim of converting it into a mobile plant which will be able to remotely process biomass such as energy crops, forestry and agricultural wastes to obtain bio-oil that, in turn, can be used as energy vector to avoid high transport costs.

09 BIOMASS FUELS↗

Biotransformation of 2,3,3,3-tetrafluoropropene (HFO-1234yf) in rabbits

2,3,3,3-Tetrafluoropropene (HFO-1234yf) is a non-ozone-depleting fluorocarbon replacement with a low global warming potential and is developed as refrigerant. Due to lethality observed after high concentration inhalation exposures of HFO-1234yf in a developmental toxicity study with rabbits, the biotransformation of HFO-1234yf was investigated in this species. Female New Zealand White rabbits were exposed to air containing 2000; 10,000; or 50,000 ppm (n = 3/concentration) HFO234yf. All inhalation exposures were conducted for 6 h in a dynamic exposure chamber. Animals were individually housed in metabolic cages after the end of the exposures and urines were collected at 12 h intervals for 60 h. For metabolite identification, urine samples were analyzed by {sup 1}H-coupled and {sup 1}H-decoupled {sup 19}F-NMR and by LC/MS-MS or GC/MS. Metabolites were identified by {sup 19}F-NMR chemical shifts, signal multiplicity, {sup 1}H-{sup 19}F coupling constants and by comparison with synthetic reference compounds. In urine samples of rabbits exposed to 2000; 10,000; or 50,000 ppm HFO-1234yf, the predominant metabolite was N-acetyl-S-(3,3,3-trifluoro-2-hydroxypropanyl)-L-cysteine and accounted for app. 48% of total {sup 19}F-NMR signal intensities. S-(3,3,3-Trifluoro-2-hydroxypropanyl)mercaptolactic acid, 3,3,3-trifluoro-1,2-dihydroxypropane, 3,3,3-trifluoro-2-propanol and inorganic fluoride were also present as urinary metabolites. In incubations of rabbit liver S9 fractions containing glutathione, NADPH and HFO-1234yf, 3,3,3-trifluoro-1,2-dihydroxypropane, S-(3,3,3-trifluoro-2-hydroxypropanyl)glutathione, 3,3,3-trifluoro-2-propanol and inorganic fluoride were identified as metabolites of HFO-1234yf by {sup 19}F-NMR. The quantity of recovered metabolites in urine suggest a low extent (< 0.1% of dose received) of biotransformation of HFO-1234yf in rabbits, and 95% of all metabolites were excreted within 12 h after the end of the exposures (t{sub 1/2} app. 9.5 h). The obtained results indicate that HFO-1234yf is metabolized in rabbits by a CYP450-mediated epoxidation at low rates and glutathione conjugation of the epoxide. The differences in urinary metabolite patterns between rats and rabbits seen with HFO-1234yf are likely due to species-specific processing of glutathione S-conjugates. Rabbits also show a larger extent of biotransformation of HFO-1234yf.

60 APPLIED LIFE SCIENCES↗

Design of a facility for the in situ measurement of catalytic reaction by neutron scattering spectroscopy

Catalysis is a critical enabling science for future energy needs. The next frontier of catalysis is to evolve from catalyst discovery to catalyst design, and for this next step to be realized, we must develop new techniques to better understand reaction mechanisms. To do this, we must connect catalytic reaction rates and selectivities to the kinetics, energetics, and dynamics of individual elementary steps and relate these to the structure and dynamics of the catalytic sites involved. Neutron scattering spectroscopies offer unique capabilities that are difficult or impossible to match by other techniques. Additionally, the current study presents the development of a compact and portable instrumental design that enables the in situ investigation of catalytic samples by neutron scattering techniques. The developed apparatus was tested at the Spallation Neutron Source (SNS) in Oak Ridge National Laboratory and includes a gas handling panel that allows for computer hookups to control the panel externally and online measurement equipment such as coupled GC-FID/TCD (Gas Chromatography-Flame Ionization Detector/Thermal Conductivity Detector) and MS (Mass Spectrometry) to characterize offgassing while the sample is in the neutron scattering spectrometer. This system is flexible, modular, compact, and portable enabling its use for many types of gas-solid and liquid-solid reactions at the various beamlines housed at the SNS.

47 OTHER INSTRUMENTATION↗

Extraction of Sulfur Mustard Metabolites from Urine Samples and Analysis by Liquid Chromatography-High-Resolution Mass Spectrometry (LC-HRMS)

The following procedure describes the extraction of sulfur mustard metabolites (principally 1,1’-sulfonylbis[2-(methylthio)ethane] (SBMTE)) and related chemicals from urine and subsequent analysis by liquid chromatography with detection by high resolution mass spectrometry (LC-HRMS) to determine signatures present in a contaminated urine sample. Positive identification of such signatures in urine may signify patient exposure to sulfur mustard (HD). A future SOP will detail analysis of these metabolites by gas chromatography-tandem mass spectrometry (GC-MS/MS).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The development of a volatile organics concentrator for use in monitoring Space Station water quality

A breadboard concept of a volatile organics concentrator (VOC) is manufactured and tested for optimized water-quality analysis in a space environment. The VOC system is attached to a gas chromatograph/mass spectrometer to analyze the volatile chemicals relevant to the operation of Space Station Freedom. The preliminary tests include: (1) comparisons with analyses based on direct on-column injections of standards; (2) analyses of iodinated volatile organics; (3) comparisons of nitrogen vs helium as the chromatography carrier gas; and (4) measurements of collection efficiency. The VOC can analyze EPA method-624 analytes at comparable detection using flame-ionization detection and can analyze volatile iodinated compounds. The breadboard has good reproducibility and can use nitrogen as a carrier gas; good results are noted for the collection and concentration levels and for water removal.

Bodek, Itamar↗

Structural characterization and biological activity of an α-glucan from the mollusk Marcia hiantina (Lamarck, 1818)

Marcia hiantina (Mollusca, Bivalvia) (Lamarck, 1818), is an edible clam mainly distributed along the tropical coastal regions. Recent researches have demonstrated that clams can possess compounds, including polysaccharides, with a wide range of biological actions including antioxidant, immunomodulatory and antitumor activities. Here an α-glucan was isolated from M. hiantina by hot water, purified by anion exchange chromatography, and its structure was characterized by a combination of multiple nuclear magnetic resonance (NMR) methods (1D 1 H, 1 H- 1 H COSY, 1 H- 1 H TOCSY, 1 H- 1 H NOESY, 1 H- 13 C HSQC and 1 H- 13 C HSQC-NOESY spectra), gas chromatography-mass spectrometry, and high performance size exclusion chromatography (HPSEC). The analysis from NMR, monosaccharide composition, methylation analyses and HPSEC combined with multi angle light scattering (MALS) of M. hiantina-derived α-glycan confirmed a branched polysaccharide exclusively composed of glucose (Glc), mostly 4-linked in its backbone, branched occasionally at 6-positions, and having a molecular weight of ~ 570 kDa. The mollusk α-glucan was subjected to four cell-based assays: (i) viability of three cell lines (RAW264.7, HaCaT, and HT-29), (ii) activity on lipopolysaccharide (LPS)-induced prostaglandin production in RAW264.7 cells, (iii) inhibitory activities of in H 2 O 2 - and LPS-induced reactive oxygen species (ROS) production in HMC3 cells, and (iv) HaCaT cell proliferation. Furthermore, results have indicated no cytotoxicity, potent inhibition of both H 2 O 2 - and LPS-induced ROS, and potent cell proliferative activity.

59 BASIC BIOLOGICAL SCIENCES↗

Gravitational effects on plant growth hormone concentration

Dolk's (1936) finding that more growth hormone diffuses from the lower side of a gravity-stimulated plant shoot than from the upper side is presently confirmed by means of both an isotope dilution assay and selected ion monitoring-gas chromatography-mass spectrometry, and it is established that the asymmetrically distributed hormone is indole-3-acetic acid (IAA). This is the first physicochemical demonstration that there is more IAA on the lower sides of a geostimulated plant shoot. It is also found that free IAA primarily occurs in the conductive vascular tissues of the shoot, while IAA esters predominate in the growing cortical cells. A highly sensitive gas chromatographic isotope dilution assay shows that the hormone asymmetry also occurs in the nonvascular tissue.

Bandurski, R. S.↗

TATB thermal decomposition: Expanding the molecular profile with cryo-focused pyrolysis GC-MS

Understanding the molecular composition of high explosives during thermal decomposition is vital for predicting the sensitivity, safety, and performance of explosive materials. The thermal decomposition of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) has been linked to the formation of furazans through a series of dehydration reactions of the NO2 and NH2 groups on the phenyl ring, along with breakdown into small molecules (≤120 amu). Molecular identification of compounds formed in this transformation of the furazans to light gases has been lacking. To address this, we have applied a pseudo-confined sampling system in a cryo-focused pyrolysis gas chromatography-mass spectrometry (pyGC-MS) system to molecularly identify these intermediates. By design, sublimation of TATB, which has complicated MS analyses of thermal degradation, was significantly reduced and additional compounds were identified with potential structural information. In addition to the known furazan compounds, one of these compounds forms from the loss of oxygen from benzo-trifurazan (F3) and produces an open ring structure that may be the first step in the formation of lower molecular weight furazan breakdown products. The loss of a nitro group from benzo-monofurazan (F1) was also discovered and implicates the formation of oxidizing NO2 gas in the thermal decomposition mechanism. So these findings are vital for understanding the proper heat flow from energetic materials on a molecular level, necessary when measuring enthalpy and developing decomposition models based on kinetic parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance Evaluation of the Operational Air Quality Monitor for Water Testing Aboard the International Space Station

In the history of manned spaceflight, environmental monitoring has relied heavily on archival sampling. For short missions, this type of sample collection was sufficient; returned samples provided a snapshot of the presence of chemical and biological contaminants in the spacecraft air and water. However, with the construction of the International Space Station (ISS) and the subsequent extension of mission durations, soon to be up to one year, the need for enhanced, real-time environmental monitoring became more pressing. The past several years have seen the implementation of several real-time monitors aboard the ISS, complemented with reduced archival sampling. The station air is currently monitored for volatile organic compounds (VOCs) using gas chromatography-differential mobility spectrometry (Air Quality Monitor [AQM]). The water on ISS is analyzed to measure total organic carbon and biocide concentrations using the Total Organic Carbon Analyzer (TOCA) and the Colorimetric Water Quality Monitoring Kit (CWQMK), respectively. The current air and water monitors provide important data, but the number and size of the different instruments makes them impractical for future exploration missions. It is apparent that there is still a need for improvements in environmental monitoring capabilities. One such improvement could be realized by modifying a single instrument to analyze both air and water. As the AQM currently provides quantitative, compound-specific information for target compounds present in air samples, and many of the compounds are also targets for water quality monitoring, this instrument provides a logical starting point to evaluate the feasibility of this approach. In this presentation, we will discuss our recent studies aimed at determining an appropriate method for introducing VOCs from water samples into the gas phase and our current work, in which an electro-thermal vaporization unit has been interfaced with the AQM to analyze target analytes at the relevant concentrations at which they are routinely detected in archival water samples from the ISS.

Wallace, William T.↗

Precision and sensitivity of the measurement of 15N enrichment in D-alanine from bacterial cell walls using positive/negative ion mass spectrometry

Sensitive detection of cellular components from specific groups of microbes can be utilized as 'signatures' in the examination of microbial consortia from soils, sediments or biofilms. Utilizing capillary gas chromatography/mass spectrometry and stereospecific derivatizing agents, D-alanine, a component localized in the prokaryotic (bacterial) cell wall, can be detected reproducibly. Enrichments of D-[15N]alanine determined in E. coli grown with [15N]ammonia can be determined with precision at 1.0 atom%. Chemical ionization with methane gas and the detection of negative ions (M - HF)- and (M - F or M + H - HF)- formed from the heptafluorobutyryl D-2 butanol ester of D-alanine allowed as little as 8 pg (90 fmol) to be detected reproducibly. This method can be utilized to define the metabolic activity in terms of 15N incorporation at the level of 10(3)-10(4) cells, as a function of the 15N-14N ratio.

Non-NASA Center↗

Elucidating the Role of Hydrogen Bond Donor and Acceptor on Solvation in Deep Eutectic Solvents Formed by Ammonium/Phosphonium Salts and Carboxylic Acids

Deep eutectic solvents (DESs) constitute a rapidly emerging class of sustainable liquids that have been widely studied and employed in chemical separations, catalysis, and electrochemistry. The unique physicochemical and solvation properties of DESs can be highly tailored by choosing the appropriate hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD). Understanding the role of the HBA and HBD on the multiple solvation interactions in DESs is important to enable their judicious selection for particular applications. As such, this work constitutes the first study to exploit chromatography to measure solute–solvent interactions of DESs using a wide array of known probe molecules. The constituent components of 20 DESs, formed by ammonium and phosphonium-based salts and carboxylic acids, are systematically modulated to delineate the contribution of the HBA and HBD toward individual solvation properties. Solute–solvent interactions measured in this study are used to interpret and explain the performance of DESs in desulfurization of fuels and extraction of natural products. The results from this study can be used to predict and understand the performance of DESs in various chemical processes where solvation interactions heavily influence outcomes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence from carbon isotope measurements for diverse origins of sedimentary hydrocarbons

The organic matter found in sedimentary rocks must derive from many sources; not only from ancient primary producers but also from consumers and secondary producers. In all of these organisms, isotope effects can affect the abundance and distribution of 13C in metabolites. Here, by using an improved form of a previously described technique in which the effluent of a gas chromatograph is continuously analysed isotopically, we report evidence of the diverse origins of sedimentary organic matter. The record of 13C abundances in sedimentary carbonate and total organic carbon can be interpreted in terms of variations in the global carbon cycle. Our results demonstrate, however, that isotope variations within sedimentary organic mixtures substantially exceed those observed between samples of total organic carbon. Resolution of isotope variations at the molecular level offers a new and convenient means of refining views both of localized palaeoenvironments and of control mechanisms within the global carbon cycle.

Non-NASA Center↗

The chemical activities of the Viking biology experiments and the arguments for the presence of superoxides, peroxides, gamma-Fe2O3 and carbon suboxide polymer in the Martian soil

The evolution of N2, Ar, O2, and CO2 from Martian soil as a function of humidity in the Gas Exchange Experiment are correlated with the mean level of water vapor in the Martian atmosphere. All but O2 are associated with desorption. The evolution of oxygen is consistent with the presence of alkaline earth and alkali metal superoxides; and their peroxides and the gamma-Fe2O3 in the soil can account for the generation of radioactive gas in the Labeled Release Experiment. The slower evolution of CO2 from both the Gas Exchange Experiment and the Labeled Release Experiment are associated with the direct oxidation of organics by gamma-Fe2O3. The Pyrolytic Release Experiment's second peak may be carbon suboxide as demonstrated by laboratory experiments. A necessary condition is that the polymer exists in the Martian soil. We ascribe the activity of the surface samples to the reaction of Martian particulates with an anhydrous CO2 atmosphere activated by uv and ionizing radiations. The surface particles are ultimately altered by exposure to small but significant amounts of water at the sites. From the working model, we have predicted the peculiar nature of the chemical entities and demonstrated that the model is justified by laboratory data. The final confirmation of this model will entail a return to Mars, but the nature and implications of this chemistry for the Martian surface is predicted to reveal even more about Mars with further simulations in the laboratory.

long duration↗

Investigation on the Charging Process of Li2O2-Based Air Electrodes in Li-O2 Batteries with Organic Carbonate Electrolytes

The charge processes of Li-O2 batteries were investigated by analyzing the gas evolution by in situ gas chromatography-mass spectroscopy (GC/MS) technique. The mixture of Li2O2/Fe3O4/Super P carbon/polyvinylidene fluoride (PVDF) was used as the starting air electrode material and 1M LiTFSI in carbonate-based solvents was used as electrolyte. It was found that Li2O2 is reactive to 1-methyl-2-pyrrolidinone and PVDF binder used in the electrode preparation. During the 1st charge (up to 4.6 V), O2 was the main component in the gases released. The amount of O2 measured by GC/MS was consistent with the amount of Li2O2 decomposed in the electrochemical process as measured by the charge capacity, indicative of the good chargeability of Li2O2. However, after the cell was discharged to 2.0 V in O2 atmosphere and re-charged to ~ 4.6 V in the second cycle, CO2 was dominant in the released gases. Further analysis of the discharged air electrode by X-ray diffraction and Fourier transform infrared spectroscopy indicated that lithium-containing carbonate species (lithium alkyl carbonate and/or Li2CO3) were the main reaction products. Therefore, compatible electrolyte and electrodes as well as the electrode preparation procedures need to be developed for long term operation of rechargeable Li-O2 or Li-air batteries.

25 ENERGY STORAGE↗

Automated single-ion peak fitting as an efficient approach for analyzing complex chromatographic data

Chromatography provides important detail on the composition of environmental samples and their chemical processing. However, the complexity of these samples and their tendency to contain many structurally and chemically similar compounds frequently results in convoluted or poorly resolved data. Data reduction from raw chromatograms of complex environmental data into integrated peak areas consequently often requires substantial operator interaction. This difficulty has led to a bottleneck in analysis that increases analysis time, decreases data quality, and will worsen as advances in field-based instrumentation multiply the quantity and informational density of data produced. In this work, we develop and validate an automated approach to fitting chromatographic data within a target retention time window with a combination of multiple idealized peaks (Gaussian peaks either with or without an exponential decay component). Herein we compare this single-ion peak fitting approach to drawn baseline integration methods of more than 70,000 peaks collected by field-based chromatographs spanning across a wide range of volatilities and functionalities. Accuracy of peak fitting under real-world conditions is found to be within 10%. The quantitative parameters describing the fit (e.g. coefficients, fit residuals, etc.) are found to provide valuable information to increase the efficiency of quality control and provide constraints to accurately integrate peaks that are significantly convoluted with neighboring peaks. Implementation of the peak fitting method is shown to yield accurate integration of peaks otherwise too poorly resolved to separate into individual compounds and improved quantitative metrics to determine the fidelity of the data reduction process, while substantially decreasing the time spent by operators on data reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-Induced Diels-Alder Reactions in C 6 H 6 -C 6 F 6 Cocrystal towards Graphane Structure

Pressure-induced polymerization (PIP) of aromatics is a novel method to construct sp 3 -carbon frameworks, and nanothreads with diamond-like structures were synthesized by compressing benzene and its derivatives. Here, by compressing benzene-hexafluorobenzene cocrystal (CHCF), we identified H-F-substituted graphane with a layered structure in the PIP product. Based on the crystal structure determined from the in situ neutron diffraction and the intermediate products identified by the gas chromatography-mass spectrum, we found that at 20 GPa CHCF forms tilted columns with benzene and hexafluorobenzene stacked alternatively, which leads to a [4+2] polymer, and then transfers to short-range ordered hydrogenated-fluorinated graphane. The reaction process contains [4+2] Diels-Alder, retro-Diels-Alder, and 1-1' coupling, and the former is the key reaction in the PIP. In conclusion, our studies confirmed the elemental reactions of the CHCF for the first time, which provides a novel insight into the PIP of aromatics.

36 MATERIALS SCIENCE↗

A pyrolysis study of allylic hydrocarbon fuels

The pyrolysis of selected C 3 –C 5 allylic hydrocarbons has been studied using a single-pulse shock tube. A new single-pulse shock tube has been designed and constructed by recommissioning an existing conventional shock tube. This facility enables the investigation of high-temperature chemical kinetics with an emphasis on combustion chemistry. The modifications performed on the existing shock tube are described, and the details of the sampling system to analyze the species concentration using a gas chromatography-mass spectrometry-flame ionization detection (GC-MS with a flame ionization detector) system are also provided. This facility is characterized and validated by performing cyclohexene pyrolysis experiments. Furthermore, the performance of the shock tube is demonstrated by reproducing previous literature measurements on the pyrolysis of isobutene. Postvalidation, this setup is used to study the pyrolysis of trans-2-butene and 2-methyl-2-butene (2M2B). A newly developed mechanism, NUIGMech1.0, is used to simulate the experimental data of propene, isobutene, 2-butene, and 2M2B, allylic hydrocarbon fuels. A description using two different kinetic simulation approaches is provided using our isobutene experiments as a reference. We found no significant differences between the two methods. Additionally, the contribution of different reaction classes on fuel consumption is detailed and the influence of geometry on fuel consumption and first aromatic ring: benzene is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗