Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Material extrusion with integrated compression molding of NdFeB/SmFeN nylon bonded magnets using small- and large-scale pellet-based 3D-printers

High-density bonded rare-earth magnets are manufactured using pellet-fed additive manufacturing (AM)/material extrusion and an integrated additive manufacturing-compression molding (AM-CM) process. Neodymium iron boron – samarium iron nitride in polyamide 12 (NdFeB-SmFeN/PA12) of 93 % weight fraction (65 % volume fraction) are used for the study. The mechanical properties (tensile strength and modulus), magnetic properties (maximum energy density, coercivity, remanence) are reported. Manufacturing parameters such as layer height, barrel temperatures, screw speed and gantry feed rate are optimized to obtain the highest possible density of the magnets using a small-scale desktop material extrusion printer. Large scale integrated additive manufacturing-compression molding (AM-CM) is then utilized to increase the density of the magnets by reducing porosity defects common in the material extrusion process. The density of as-printed magnets was 5.2 g/cm 3 with a BH max value of 124.14 kJ/m 3 , tensile strength of 20 MPa and a modulus of 2 GPa. AM-CM increased the density of the compound by 5.5 % (5.49 g/cm 3 ). The reduction in porosity was confirmed using X-ray tomography (XCT). Improvement in mechanical strength of the material was also observed, with an increase in tensile strength of 25 % (25.09 MPa) and increase in tensile modulus of 275 % (5.49 GPa). Scanning electron microscopy showed increased particle-matrix adhesion with the integrated AM-CM process.

36 MATERIALS SCIENCE↗

Water requirements of short rotation poplar coppice: Experimental and modelling analyses across Europe

Poplars are among the most widely used short rotation woody coppice (SRWC) species but due to their assumed high water use, concerns have been raised with respect to large-scale exploitation and potentially detrimental effects on water resources. Here we present a quantitative analysis of the water requirements of poplar SRWC using experimental data and a soil water balance modelling approach at three different sites across Europe. We used (i) eddy covariance (EC) measurements (2004–2006) at an irrigated SRWC grown on a previous rice paddy in northern Italy, (ii) Bowen ratio and energy balance (BREB) measurements (2008–2015) and EC (2011–2015) at a SRWC in rain-fed uplands in the Czech Republic, and (iii) EC measurements (2010–2013) at a SRWC on a previous agricultural land with a shallow water table in Belgium. Without any calibration against water balance component measurements, simulations by the newly developed soil water balance model R-4ET were compared with evapotranspiration (ET) measurements by EC and BREB with a resulting mean root mean square error (RMSE) of 0.75 mm day -1 . In general, there was better agreement between EC and the model (RMSE = 0.66 mm day -1 ) when EC data were adjusted for lack of energy balance closure. A comparison of the simulated and measured soil water content yielded a mean RMSE of 0.03 m 3 m -3 . The mean annual crop coefficient, i.e. the ratio between actual and reference ET, was 0.82 (ranging from 0.65 to 0.95) while the monthly maxima reached 1.16. These values indicated that ET of poplar SRWC was significantly lower than ET of a well-watered grass cover at the annual time scale, but exceeded ET of the reference cover at shorter time scales during the growing season. We show that the model R-4ET is a simple, yet reliable tool for the assessment of water requirements of existing or planned SRWC. For very simple assessments on an annual basis, using a crop coefficient of 0.86 (adjusted to a sub-humid climate), representing an average value across the three sites in years with no evident drought stress, is supported by this analysis.

54 ENVIRONMENTAL SCIENCES↗

Supplemental dietary full-fatted and defatted Desmodesmus sp. exerted similar effects on growth performance, gut health, and excreta hydrothermal liquefaction of broiler chicks

This study determined effects of full-fatted (C046, 41% crude protein) and lipid extracted (LEA, 39% crude protein) microalgae Desmodesmus sp. on growth performance, gut health, and excreta hydrothermal liquefaction of broiler chickens. Two experiments were conducted by feeding day-old Cornish male chicks: 1) a corn-soybean meal basal diet (control) 2) control +5% C046, or 3) control +5% LEA for 2 weeks. Growth performance was measured weekly in both experiments. Blood, liver, and duodenum samples of chickens were collected for biochemical analyses, and excreta samples were collected for hydrothermal liquefaction (300 °C, 60 min) at the end of Experiment 2. Compared with the control, supplemental dietary C046 and LEA enhanced average daily gain (13% to 40%, p < 0.05) in both experiments, and improved feed efficiency (15% and 11%, p < 0.01) in Experiment 2. The C046 and LEA diets enhanced the duodenum (19% to –2 fold, p < 0.05), but decreased the liver (17 to 78%, p < 0.05) mRNA abundances of interleukins-1, 6 and 8 and (or) tumor necrosis factor-α, respectively, compared with the controls. Meanwhile, the two types of biomass enhanced the protein amounts of claudin-1 in the duodenum (5–34%, p < 0.05) than the controls. Hydrothermal liquefaction of the excreta derived from the three diets showed no major differences in total bio-crude oil (average of 23%), hydrochar yield (average of 12%), or elemental compositions. However, the heating values of the resultant two bio-crude oils from the microalgae-fed chicken excreta (average of 34 MJ/kg) were 16% greater than those from the control chickens (29 MJ/kg). In conclusion, supplementing the full- and de-fatted Desmodesmus sp. microalgal biomass in the starter diets for broiler chickens produced largely similar improvements of growth performance, gut health, and excreta-derived oil quality.

09 BIOMASS FUELS↗

Excessive Aurantiochytrium acetophilum docosahexaenoic acid supplementation decreases growth performance and breast muscle mass of broiler chickens

We report Docosahexaenoic acid (DHA) is an n-3 polyunsaturated fatty acid with health-promoting potential. This study was to investigate effects of supplemental DHA from Aurantiochytrium acetophilum on growth performance, health status, meat quality, and protein synthesis signaling of broiler chickens. Day-old male chicks were housed in an environmental control room (6 cages/treatment, 8 chicks/cage), and fed a corn-soybean meal basal diet supplemented with the DHA-rich A. acetophilum biomass (Heliae, Gilbert, AZ) at 0, 1, 2, and 4% (0, 1.7, 3.4 and 6.8 g DHA/kg diet) for 6 weeks. Growth performance was measured weekly. Blood samples were collected at weeks 3 and 6 (2 chicks/cage). Four tissues were sampled (2 chicks/cage) for biochemical and meat quality analyses. Data were analyzed by one-way ANOVA and regression. Compared with the control, the 4% A. acetophilum diet decreased (p < 0.05) body weight gain (19%) and gain to feed ratio (19%) during weeks 4–6. The A. acetophilum supplementation dose-dependently decreased (p < 0.05, R 2 = 0.21–0.54) plasma alanine amino transferase activity and glucose concentrations, but had little effect on plasma activity of alkaline phosphatase or concentrations of inorganic phosphorus and uric acid at weeks 3 and 6. Compared with the control, the 4% A. acetophilum diet decreased (p < 0.05) breast muscle weight by 21%, and down-regulated (p < 0.05) mRNA levels of mammalian target of rapamycin and ribosomal s6 protein (S6), and protein levels of phosphorylated S6 to S6 and phosphorylated S6 kinase beta 1 to S6 kinase beta 1. The A. acetophilum supplementation linearly increased (p < 0.01) lipid peroxidation (R 2 = 0.62–0.90) and hardness and chewiness (R 2 = 0.34–0.44) of breast and thigh muscles. In conclusion, supplemental 4% (6.8 g DHA/kg), but not 1 or 2%, of A. acetophilum impaired growth performance, breast muscle mass accumulation, and(or) protein synthesis signaling of broilers.

59 BASIC BIOLOGICAL SCIENCES↗

Impacts of feeding three strains of microalgae alone or in combination on growth performance, protein metabolism, and meat quality of broiler chickens

Variations in nutrient compositions, especially amino acid (AA) profiles, among microalgal species may enable a superior feeding outcome from a combined than singular supplementation in poultry diets. Therefore, a feeding trial was conducted to compare the effects of three strains of microalgal biomass supplemented alone or in combination to replace 5 % (starter) and 10 % (grower) soybean meal (on weight-to-weight basis) on growth performance, protein metabolism, and meat quality of broiler chickens. Day-old Cornish Cross male chicks (total = 180) were divided into 5 groups (6 cages/treatment, 6 birds/cage) and fed a corn-soybean meal basal diet (BD), BD + H117 (Chlorella sp., H117), BD + C985 (Tetraselmis sp., C985), BD + Nannochloropsis oceanica (NO), and BD + H117 + C985 + NO (Combination). Feeding any of the microalgae diets did not alter growth performance nor meat quality including texture, pH, color, and water holding capacity of breast and thigh meats. However, the breast weight percentages were decreased (P < 0.05) by feeding the C985, NO, and Combination diets. Compared with the BD, the 4 microalgal diets led to higher (P < 0.05) plasma uric acid and protein concentrations at weeks 3 and (or) 6. The mRNA levels of MAFbx, MURF1, FOXO1, and calpastatin in the breast and thigh muscles were altered by the microalgal diets but not those of genes associated with other quality traits. In conclusion, replacing 5 % or 10 % soybean meal with three sources of microalgae in broiler diets decreased breast weights percentage but not absolute weight. Furthermore, feeding chickens with the combination of three microalgae did not restore the breast loss and induced different expressions of genes related to muscle hypertrophy or atrophy.

59 BASIC BIOLOGICAL SCIENCES↗

Design and scale-up of 3D printed bat houses with biomass-derived polymer composites

Biomass (e.g., pine sawdust, especially high–ash content pine sawdust) is commonly disposed of as waste. Combining biomass with polymers to make composite feedstocks for 3D printing has been explored as a method to reduce or repurpose the biomass waste. Although not all biocomposite properties are known, the wood-based polylactic acid (PLA) composite has promising qualities for applications in ecological settings. In this work, pine wood–PLA composite feedstock was used to 3D print supplemental roost structures for endangered tree-roosting bats, which often face a paucity of suitable naturally occurring roosts. This material combination was selected because it is estimated to degrade faster than the synthetic material systems that are used widely in supplemental bat roosting structures to aid in the conservation of tree roosting bats. The layered, rough surface created by the 3D printing process serves as a surface that bats can grip while roosting. Computer-aided design (CAD) models were generated based on natural roost structures, and a full-size bat house was successfully additively manufactured using a pellet-fed large-scale 3D printing system. The 3D printed hexagon exhibited a tensile strength of 22–23 MPa and a Young’s modulus of 3202–3218 MPa in the x-direction. It has been demonstrated that the 3D printed bat house can be installed on a tree in a stable fashion. This successful demonstration of a bat roost manufactured using a bioderived composite should promote its use in other fish and wildlife structures and broader industrial applications such as construction and automobiles.

3D printing↗

Thermal Decomposition of Bulk K-CoMoSx Mixed Alcohol Catalyst Precursors and Effects on Catalyst Morphology and Performance

Cobalt molybdenum sulfide-type mixed alcohol catalysts were synthesized via calcination of precipitated bulk sulfides and studied with temperature programmed decomposition analysis. Precursors containing aqueous potassium were also considered. Precipitates thermally decomposed in unique events which released ammonia, carbon dioxide, and sulfur. Higher temperature treatments led to more crystalline and less active catalysts in general with ethanol productivity falling from 203 to 97 g (kg cat){sup -1} h{sup -1} when the calcination temperature was increased from 375 to 500 C. The addition of potassium to the precursor led to materials with crystalline potassium sulfides and good catalytic performance. In general, less potassium was required to promote alcohol selectivity when added before calcination. At calcination temperatures above 350 C, segregated cobalt sulfides were observed, suggesting that thermally decomposed sulfide precursors may contain a mixture of molybdenum and cobalt sulfides instead of a dispersed CoMoS type of material. When dimethyl disulfide was fed to the precursor during calcination, crystalline cobalt sulfides were not detected, suggesting an important role of free sulfur during decomposition.

09 BIOMASS FUELS↗

Hydroconversion of liquid hydrocarbons in a staged autothermal reactor

An autothermal staged reactor was assembled containing a top stage of Rh-Ce/alpha-Al2O3 which generated heat and H-2 by reacting CH4 and air that passed through a downstream stage containing 0.5 wt% Pt/gamma-Al2O3 mixed with either HBEA, HZSM-5, or USY in a heat-integrated non-isothermal reactor. The H-2 produced subsequently reacts in a 20:1 ratio with a co-feed of hexane or decane or 2-decanone fed to the reactor between the stages. The large-sized pores of HBEA and USY allowed deoxygenation of 2-decanone to form decene isomers which can crack or cyclize to form up to a 36% yield of methylated and ethylated monoaromatics. The medium-sized pores of HZSM-5 restricted decene formation from 2-decanone by catalyzing cracking reactions to C2-6 compounds which can cyclize to form aromatics. By contrast, the reactor effluent from non-oxygenated reactants decane and hexane contained less than 5% aromatics. Thus, we extend the scope of staged autothermal reactor functionality to hydrocracking and hydroisomerization of higher saturated and oxygenated hydrocarbons. (C) 2012 Elsevier B.V. All rights reserved.

Blass, SD↗

n-Butane dehydrogenation over Pt/Mg(In)(Al)O

The thermal dehydrogenation of butane to butene and hydrogen was explored over Pt nanoparticles supported on calcined hydrotalcite containing indium, Mg(In)(Al)O. Previous work has shown that upon reduction in H 2 at temperatures above 673 K, bimetallic Pt-In particles of are formed, as evidenced by XANES and EXAFS. The performance of Pt/Mg(In)(Al)O for butane dehydrogenation was found to be highly dependent on the bulk In/Pt ratio. The optimal ratio was found to be between 0.33 and 0.88, yielding >95% selectivity to butenes. Hydrogen co-fed with butane was shown to suppress coke formation and catalyst deactivation, a ratio of H 2 /C 4 H 10 = 2.5 providing the best catalytic performance. Regeneration of catalysts after removal of accumulated carbon and reduction in H 2 restored the original catalyst activity and selectivity. Butane dehydrogenation above 803 K resulted in higher formation of butadiene, a known precursor to coke. No evidence for butane cracking was found to occur on Pt/Mg(In)(Al)O due to moderately basic nature of the support. This study shows that Pt/Mg(In)(Al)O exhibits superior performance for butane dehydrogenation compared to supported Pt catalysts promoted with Sn, Ge, Pb, and In prepared by successive incipient wetness impregnation of the Pt and promoter precursors.

Butane dehydrogenation↗

Spectroscopic insight into carbon speciation and removal on a Cu/BEA catalyst during renewable high-octane hydrocarbon synthesis

Conversion of methanol and dimethyl ether (DME) to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu oxide during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Analysis of heat release dynamics in an internal combustion engine using multifractals and wavelets

In this paper we analyze data from previously reported experimental measurements of cycle-to-cycle combustion variations in a lean-fueled, multi-cylinder spark-ignition (SI) engine. We characterize the changes in the observed combustion dynamics with as-fed fuel air ratio using conventional histograms and statistical moments, and we further characterize the shifts in combustion complexity in terms of multifractals and wavelet decomposition. Changes in the conventional statistics and multifractal structure indicate trends with fuel air ratio that parallel earlier reported observations. Wavelet decompositions reveal persistent, non-stochastic oscillation modes at higher fuel air ratios that were not obvious in previous analyses. Recognition of these long-time-scale, non-stochastic oscillations is expected to be useful for improving modelling and control of engine combustion variations and multi-cylinder balancing.

Sen, Asok K↗

Multi-level computational exploration of advanced combustion engine operating strategies

Advanced combustion engine (ACE) research is typically carried out on single-cylinder research engines. These engines are designed to tightly control fueling and conditions at intake valve closure (IVC) and to precisely measure in-cylinder conditions and emissions. However, to be able to measure and control engine operation so precisely, these research engines typically do not feature intake and exhaust tracts that resemble those in production engines, specifically in regards to turbomachinery, heat exchangers, and exhaust gas recirculation (EGR) systems. For this reason, these research engines are effective for understanding in-cylinder combustion parameters such as heat release rate, burn duration, combustion efficiency, pollutant formation, and exhaust valve opening (EVO) conditions. Here, this paper applies high fidelity simulations to determine the feasibility of achieving a chosen single cylinder engine operating point on a production type homogeneous charge compression ignition (HCCI) engine, using a partial fuel stratification (PFS) strategy. To accomplish this, a Converge 3 dimensional (3D) – computational fluid dynamics (CFD) model of the experimental combustion chamber and intake and exhaust runners was created to simulate the experimental engine. This model was used to simulate an operating point achieved experimentally, as well as to determine the sensitivity of the operating point to variations in intake pressure, intake temperature, injection timing, injected mass, and EGR fraction. The results from these simulations were fed into a 1-dimensional engine simulation created in AVL Boost, featuring production-type intake and exhaust systems, including turbomachinery and heat exchangers necessary to create the required IVC conditions. This full engine simulation was used to assess the cycle efficiency of the engine at the experimental operating condition, and to assess whether changes to this operating point in intake temperature, intake pressure, direct injection timing, or fueling are beneficial to the cycle efficiency and engine-out emissions. In addition, the sensitivity of promising engine operating points to injection timing and injection mass are determined to evaluate the potential stability of these operating points.

33 ADVANCED PROPULSION SYSTEMS↗

Renewable diesel via hydrothermal liquefaction of oleaginous yeast and residual lignin from bioconversion of corn stover

A major barrier to profitable bioconversion of cellulosic biomass to hydrocarbon fuel precursors is the difficulty in breaking down feedstock lignin into carbon substrates that can be easily metabolized by industrial microbes. Hydrothermal liquefaction (HTL) of cellulosic biomass effectively breaks down and converts lignin into biocrude oil products, but provides relatively low yields of biocrude from feedstock carbohydrates. In the present study, bioconversion and HTL were integrated into a new hybrid system that employs the best of both processes to produce high quality fuel in high quantity. Bioreactor cultivation of the oleaginous yeast Lypomyces starkeyi produced dry cell mass yields up to 0.43 g/g of sugar and yields of intracellular triglyceride lipids (measured as fatty acid methyl esters) of up to 0.26 g/g of sugar in pretreated corn stover hydrolysate or simulated hydrolysate media. The lipid-rich bioreactor broth was mixed with pretreated corn stover lignin, and then co-fed to an HTL reactor to produce 0.40 g of biocrude oil per gram of feed on a dry weight basis. Optimizing the separation of HTL biocrude and the HTL aqueous phase could significantly increase the biocrude yield. Hydrotreating of the biocrude produced a high quality, renewable hydrocarbon fuel blendstock, with the majority of the product boiling in the distillate range. The estimated cost of production could be reduced to $3/gasoline gallon equivalent through addressing identified research gaps. Our results provide a proof-of-concept for a new hybrid biorefinery design that could enhance domestic production of renewable diesel, jet, and marine fuel in the United States.

Biomass, Continuous hydrothermal liquefaction, Bio↗

Robust trajectory-constrained frequency control for microgrids considering model linearization error

Grid supportive modes integrated within inverter-based resources can improve the frequency response of renewable-rich microgrids. The synthesis of grid supportive modes to guarantee frequency trajectory constraints under a predefined disturbance set is challenging but essential. To tackle this challenge, a numerical optimal control (NOC)-based control synthesis methodology is proposed. Without loss of generality, a wind-diesel fed microgrid is studied, where we aim to design grid supportive functions in the wind turbine. In the control design, linearized models are used, and the linearization-induced errors are quantitatively analyzed by reachability and interval arithmetics and represented in the form of interval uncertainties. Then, the NOC problem can be formulated into a robust mixed-integer linear program. The control structure is strategically configured into two levels to realize online deployment. The proposed control is verified on the modified 33-node microgrid with a full-order three-phase nonlinear model in Simulink. In conclusion, the simulation results show the effectiveness of the proposed control paradigm and the necessity of considering linearization-induced uncertainty.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Experimental demonstration of a 5 kW th granular-flow reactor for solar thermochemical energy storage with aluminum-doped calcium manganite particles

A two-step cycle was discussed for solar thermochemical energy storage based on aluminum-doped calcium manganite reduction/oxidation reactions for direct integration into Air Brayton cycles. The two steps encompassed 1) the storage of concentrated solar direct irradiation via the thermal reduction of aluminum-doped calcium manganite and 2) the delivery of heat to an Air-Brayton cycle via re-oxidation of oxygen-deficient aluminum-doped calcium manganite. The re-oxidized aluminum-doped calcium manganite was fed back to the first step to complete the cycle. A 5 kWth solar thermochemical reactor operating under vacuum was fabricated and tested to examine the first cycle reduction step. Reactor operating conditions and high-flux solar simulator control were tuned for continuous reactor operation with particle temperatures > 1073 K. Continuous operation was achieved using intermittent, dense granular flows. A maximum absorption efficiency of 64.7% was shown, accounting for both sensible and chemical heat storage.

25 ENERGY STORAGE↗

Twin-screw granulation: Mechanistic understanding of the effect of material properties on key granule quality attributes through the analysis of mixing dynamics and granulation rate mechanisms

This study focuses on understanding the effect of material properties on granule quality attributes through the analysis of mixing dynamics and granulation rate mechanisms. Powder wettability, binder viscosity, and liquid-to-solid (L/S) ratio were the factors that were investigated in this study. Further, the mixing occurring inside the twin-screw granulator (TSG) was quantitatively assessed by obtaining the axial dispersion coefficient from the experimentally measured residence time distribution (RTD) curves. It was observed that the quality of the nuclei fed to the kneading zone significantly affected the mixing dynamics. The quality of nuclei was governed by nucleation kinetics, which in turn was principally affected by the liquid saturation of the nuclei and the ratio of drop penetration time and encounter time, which in turn were affected by the L/S ratio and binder viscosity respectively. The hydrophobicity of the blend mainly affected the extent of nucleation. The type of nuclei entering the kneading zone and mixing dynamics in the TSG also determined whether the granulation growth mechanism was “layering-dominant” or “viscous-dominant”. It was also shown that the resultant granule quality attributes were a reflection of the growth mechanisms. Ultimately, a mechanistic link between material properties, mixing dynamics, granulation rate mechanisms, and granule quality attributes was established.

36 MATERIALS SCIENCE↗