Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Earth system model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

The Earth Surface Mineral Dust Source Investigation: An Earth Science Imaging Spectroscopy Mission

The Earth Surface Mineral Dust Source Investigation, EMIT, is planned to operate from the International Space Station starting no earlier than the fall of 2021. EMIT will use visible to short wavelength infrared imaging spectroscopy to determine the mineral composition of the arid land dust source regions of the Earth to advance our knowledge of the radiative forcing effect of these aerosols. Mineral dust emitted into the atmosphere under high wind conditions is an element of the Earth system with many impacts to the Earth’s energy balance, atmosphere, surface, and oceans. The Earth’s mineral dust cycle with source, transport, and deposition phases are studied with advanced Earth System Models. Because the chemical composition, optical and surface properties of soil particles vary strongly with the mineral composition of the source, these models require knowledge of surface soil mineral dust source composition knowledge to accurately understand dust impacts on the Earth system now and in the future. At present, compositional knowledge of the Earth’s mineral dust source regions from existing data sets is uncertain as a result of limited measurements. EMIT will use spectroscopically derived surface mineral composition to update the prescribe boundary conditions for state-of-the-art Earth System Models. The EMIT-initialized models will be used to investigate the impact of direct radiative forcing in the Earth system that depends strongly on the composition of the mineral dust aerosols emitted into the atmosphere. These new measurements and related products will be used to address the EMIT science objectives and made available to the science community for additional investigations. An overview of the EMIT science, development, and mission is presented in this paper.

Green, Robert O.↗

Coastal Wetland Carbon Sequestration in a Warmer Climate (Final Report)

Coastal wetlands are global hotspots of carbon storage and locations where carbon and nitrogen cycles have a disproportionately large impact on land, water, and air in comparison to the area they occupy. The extremely high rates of carbon sequestration in these systems are the result of complex feedbacks between vegetation and the physical environment. The plant and microbial interactions that drive these feedbacks are absent in ecosystem- and global-scale Earth System models. The goal of this proposal was to address the uncertain response of the coastal carbon sink to climate change, a critical knowledge gap in coastal carbon research and a significant barrier to incorporating coastal wetlands into Earth System Models. The Salt Marsh Accretion Response to Temperature eXperiment (SMARTX) was designed to understand the ecosystem-scale consequences of warming and elevated CO₂ (eCO₂) in tidal wetlands at the coastal terrestrial-aquatic interface. We successfully designed and built a novel whole-ecosystem warming and eCO₂ experiment in a coastal wetland. The gradient design of the warming treatments (+0, +1.7, +3.4, +5.1 ⁰C) allowed us to discover unexpected non-linear and non-additive responses arising from plant-microbe interactions. We concluded that these non-linear responses to warming were the result of plants and microbes responding to temperature at different thresholds, with important consequences for forecasting terrestrial ecosystem responses to climate change and understanding global trends.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of E3SM Simulated Aerosols and Aerosol‐Cloud Interactions Across GCM and Convection‐Permitting Scales

This paper introduces an Earth system modeling testbed for predicting aerosols and aerosol‐cloud interactions (ACIs) at convection‐permitting scales. Using the Energy Exascale Earth System Model (E3SM) version 2 with a four‐mode Modal Aerosol Module, we conduct simulations at 3.25 km resolution on a regionally refined mesh (RRM) across four regions with distinct aerosol and cloud regimes. Results are compared with the standard 100 km E3SM configuration and evaluated against satellite, aircraft, and ground‐based observations. We find that increasing model resolution improves heavy precipitation simulation but amplifies positive bias in light drizzle at coarse resolution. These resolution‐induced changes affect cloud and aerosol properties to varying degrees across regions. Generally, cloud cover and liquid water path (LWP) show better agreement with satellite retrievals at 3.25 km, though surface‐based comparisons suggest otherwise. Aerosol composition remains poorly represented at both resolutions. The RRM increases Aitken mode aerosol number concentrations via enhanced new particle formation. However, accumulation mode aerosols are decreased at higher resolution as aerosol removals become more efficient. This partially contributes to fewer cloud condensation nuclei (CCN) and lower cloud droplet number concentrations (N d ), which produces larger model biases in some scenarios. These findings suggest that solely increasing horizontal resolution to kilometer scales is insufficient to broadly improve aerosol and cloud predictions without concurrent advancements in physical and chemical process representations. Nonetheless, the RRM moderately improves key ACI relationships such as CCN‐N d correlation, reflecting enhanced aerosol activation representation. The LWP‐N d relationship is also better captured by RRM, suggesting a better characterization of LWP adjustment.

Huang, Meng [Pacific Northwest National Laboratory↗

Impact of numerical choices on water conservation in the E3SM Atmosphere Model version 1 (EAMv1)

Abstract. The conservation of total water is an important numerical feature for global Earth system models. Even small conservation problems in the water budget can lead to systematic errors in century-long simulations. This study quantifies and reduces various sources of water conservation error in the atmosphere component of the Energy Exascale Earth System Model. Several sources of water conservation error have been identified during the development of the version 1 (V1) model. The largest errors result from the numerical coupling between the resolved dynamics and the parameterized sub-grid physics. A hybrid coupling using different methods for fluid dynamics and tracer transport provides a reduction of water conservation error by a factor of 50 at 1∘ horizontal resolution as well as consistent improvements at other resolutions. The second largest error source is the use of an overly simplified relationship between the surface moisture flux and latent heat flux at the interface between the host model and the turbulence parameterization. This error can be prevented by applying the same (correct) relationship throughout the entire model. Two additional types of conservation error that result from correcting the surface moisture flux and clipping negative water concentrations can be avoided by using mass-conserving fixers. With all four error sources addressed, the water conservation error in the V1 model becomes negligible and insensitive to the horizontal resolution. The associated changes in the long-term statistics of the main atmospheric features are small. A sensitivity analysis is carried out to show that the magnitudes of the conservation errors in early V1 versions decrease strongly with temporal resolution but increase with horizontal resolution. The increased vertical resolution in V1 results in a very thin model layer at the Earth's surface, which amplifies the conservation error associated with the surface moisture flux correction. We note that for some of the identified error sources, the proposed fixers are remedies rather than solutions to the problems at their roots. Future improvements in time integration would be beneficial for V1.

54 ENVIRONMENTAL SCIENCES↗

The Effect of Physically Based Ice Radiative Processes on Greenland Ice Sheet Albedo and Surface Mass Balance in E3SM

Abstract A significant portion of surface melt on the Greenland Ice Sheet (GrIS) is due to dark ice regions in the ablation zone, where solar absorption is influenced by the physical properties of the ice, light absorbing constituents (LACs), and the overlying crustal surface or melt ponds. Earth system models (ESMs) typically prescribe the albedo of ice surfaces as a constant value in the visible and near‐infrared spectral regions. This work advances ESM ice radiative transfer modeling by (a) incorporating a physically based radiative transfer model (SNow, ICe and Aerosol Radiation model Adding‐Doubling Version 4; SNICAR‐ADv4) into the Energy Exascale Earth System Model (E3SM), (b) determining spatially and temporally varying bare ice physical properties over the GrIS ablation zone from satellite observations to inform SNICAR‐ADv4, and (c) assessing the impacts on simulated GrIS albedo and surface mass balance associated with modeling of more realistic bare ice albedo. GrIS‐wide bare ice albedo in E3SMv2 is overestimated by ∼4% in the visible and ∼7% in the near‐infrared wavelengths compared to the Moderate Resolution Imaging Spectroradiometer. Our bare ice physical property retrieval method found that LACs, ice crustal surfaces, and melt ponds reduce visible albedo by 30% in the bare ice region of the GrIS ablation zone. The realistic bare ice albedo reduces surface mass balance by ∼145 Gt, or 0.4 mm of sea‐level equivalent between 2000 and 2021 compared to the default E3SM. This work highlights the importance of simulating bare ice albedo accurately and realistically to improve our ability to quantify changes in the GrIS surface mass and radiative energy budgets.

58 GEOSCIENCES↗

Understanding processes that control dust spatial distributions with global climate models and satellite observations

Dust aerosol is important in modulating the climate system at local and global scales, yet its spatiotemporal distributions simulated by global climate models (GCMs) are highly uncertain. In this study, we evaluate the spatiotemporal variations of dust extinction profiles and dust optical depth (DOD) simulated by the Community Earth System Model version 1 (CESM1) and version 2 (CESM2), the Energy Exascale Earth System Model version 1 (E3SMv1), and the Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2) against satellite retrievals from Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), Moderate Resolution Imaging Spectroradiometer (MODIS), and Multi-angle Imaging SpectroRadiometer (MISR). We find that CESM1, CESM2, and E3SMv1 underestimate dust transport to remote regions. E3SMv1 performs better than CESM1 and CESM2 in simulating dust transport and the northern hemispheric DOD due to its higher mass fraction of fine dust. CESM2 performs the worst in the Northern Hemisphere due to its lower dust emission than in the other two models but has a better dust simulation over the Southern Ocean due to the overestimation of dust emission in the Southern Hemisphere. DOD from MERRA-2 agrees well with CALIOP DOD in remote regions due to its higher mass fraction of fine dust and the assimilation of aerosol optical depth. The large disagreements in the dust extinction profiles and DOD among CALIOP, MODIS, and MISR retrievals make the model evaluation of dust spatial distributions challenging. Our study indicates the importance of representing dust emission, dry/wet deposition, and size distribution in GCMs in correctly simulating dust spatiotemporal distributions.

54 ENVIRONMENTAL SCIENCES↗

Predicting the earth's future

The development of earth system models that will simulate the past and present and provide predictions of future conditions is essential now that human activities have the potential to induce changes in the planetary environment. Critical aspects of global change include its pervasiveness and ubiquity, its distribution in several distinct time-scale bands, and the interactions between the atmosphere, ocean, land surface, and the terrestrial and marine biospheres. A model of the earth system on the scale of decades to centuries, developed by the Earth System Science Committee (NASA) with the strategy of dividing by time scale rather than discipline, is presented and the requirements for observations to support the implementation of the model are reviewed.

Dutton, J. A.↗

Impact of numerical choices on water conservation in the E3SM Atmosphere Model Version 1 (EAM V1)

The conservation of total water is an important numerical feature for global Earth system models. Even small conservation problems in the water budget can lead to systematic errors in century-long simulations for sea level rise projection. This study quantifies and reduces various sources of water conservation error in the atmosphere component of the Energy Exascale Earth System Model. Several sources of water conservation error have been identified during the development of the version 1 (V1) model. The largest errors result from the numerical coupling between the resolved dynamics and the parameterized sub-grid physics. A hybrid coupling using different methods for fluid dynamics and tracer transport provides a reduction of water conservation error by a factor of 50 at 1° horizontal resolution as well as consistent improvements at other resolutions. The second largest error source is the use of an overly simplified relationship between the surface moisture flux and latent heat flux at the interface between the host model and the turbulence parameterization. This error can be prevented by applying the same (correct) relationship throughout the entire model. Two additional types of conservation error that result from correcting the surface moisture flux and clipping negative water concentrations can be avoided by using mass-conserving fixers. With all four error sources addressed, the water conservation error in the V1 model is negligible and insensitive to the horizontal resolution. The associated changes in the long-term statistics of the main atmospheric features are small. A sensitivity analysis is carried out to show that the magnitudes of the conservation errors decrease strongly with temporal resolution but increase with horizontal resolution. The increased vertical resolution in the new model results in a very thin model layer at the Earth’s surface, which amplifies the conservation error associated with the surface moisture flux correction. We note that for some of the identified error sources, the proposed fixers are remedies rather than solutions to the problems at their roots. Future improvements in time integration would be beneficial for this model.

Zhang, Kai↗

Implementation and Evaluation of Emission‐Driven Land‐Atmosphere Coupled Simulation in E3SMv2.1

Emissions-driven (prognostic CO 2 ) simulations are essential for representing two-way carbon-climate feedback in Earth System Models. We present an emissions-driven land–atmosphere coupled biogeochemistry (BGC) configuration (BGCLNDATM_progCO2) in version 2.1 of the Energy Exascale Earth System Model (E3SMv2.1). This is the first E3SM configuration that performs land-atmosphere emission-hindcasts. Here, we document its implementation, evaluate the model's performance against observations and other models, and propose a structured evaluation protocol for such emissions-driven simulations. We conducted transient historical simulations (1850–2014) with BGCLNDATM_progCO2 and compare them to reference simulations—a land-atmosphere coupled simulation without BGC and a standalone land simulation with BGC, both using prescribed CO 2 concentrations—and to observations. BGCLNDATM_progCO2 overestimates atmospheric CO 2 concentrations by 11–23 ppm yet stays within the 40-ppm spread CMIP6 emission-driven models and retains physical climate properties comparable to the reference runs. The CO 2 biases are partly attributed to underrepresented oceanic CO 2 uptake and inadequate representations of some terrestrial processes. In general, introducing prognostic CO 2 did not change physical climate metrics at the global scale but had larger regional effects, particularly over land where spatially heterogeneous CO 2 and prognostic leaf area index influenced surface energy balance. Finally, we propose a general evaluation protocol including spin-up assessment, atmospheric CO 2 benchmarking, physical climate evaluation, and land biogeochemical analysis to support scientific rigor and facilitate inter-model comparisons. The new configuration lays the groundwork for future enhancements, including improved terrestrial biogeochemical processes, integrated marine biogeochemistry, and additional human–Earth system interactions. These developments advance E3SM toward fully coupled emissions-driven simulations, enabling more accurate carbon–climate feedback projections and informing mitigation policy by providing physically consistent carbon-budget metrics for mitigation scenarios.

54 ENVIRONMENTAL SCIENCES↗

Geometric remapping of particle distributions in the Discrete Element Model for Sea Ice (DEMSI v0.0)

Abstract. A new sea ice dynamical core, the Discrete Element Model for Sea Ice (DEMSI), is under development for use in coupled Earth system models. DEMSI is based on the discrete element method, which models collections of ice floes as interacting Lagrangian particles. In basin-scale sea ice simulations the Lagrangian motion results in significant convergence and ridging, which requires periodic remapping of sea ice variables from a deformed particle configuration back to an undeformed initial distribution. At the resolution required for Earth system models we cannot resolve individual sea ice floes, so we adopt the sub-grid-scale thickness distribution used in continuum sea ice models. This choice leads to a series of hierarchical tracers depending on ice fractional area or concentration that must be remapped consistently. The circular discrete elements employed in DEMSI help improve the computational efficiency at the cost of increased complexity in the effective element area definitions for sea ice cover that are required for the accurate enforcement of conservation. An additional challenge is the accurate remapping of element values along the ice edge, the location of which varies due to the Lagrangian motion of the particles. In this paper we describe a particle-to-particle remapping approach based on well-established geometric remapping ideas that enforces conservation, bounds preservation, and compatibility between associated tracer quantities, while also robustly managing remapping at the ice edge. One element of the remapping algorithm is a novel optimization-based flux correction that enforces concentration bounds in the case of nonuniform motion. We demonstrate the accuracy and utility of the algorithm in a series of numerical test cases.

58 GEOSCIENCES↗

SERGHEI (SERGHEI-SWE) v1.0: a performance-portable high-performance parallel-computing shallow-water solver for hydrology and environmental hydraulics

The Simulation EnviRonment for Geomorphology, Hydrodynamics, and Ecohydrology in Integrated form (SERGHEI) is a multi-dimensional, multi-domain, and multi-physics model framework for environmental and landscape simulation, designed with an outlook towards Earth system modelling. At the core of SERGHEI's innovation is its performance-portable high-performance parallel-computing (HPC) implementation, built from scratch on the Kokkos portability layer, allowing SERGHEI to be deployed, in a performance-portable fashion, in graphics processing unit (GPU)-based heterogeneous systems. In this work, we explore combinations of MPI and Kokkos using OpenMP and CUDA backends. In this contribution, we introduce the SERGHEI model framework and present with detail its first operational module for solving shallow-water equations (SERGHEI-SWE) and its HPC implementation. This module is designed to be applicable to hydrological and environmental problems including flooding and runoff generation, with an outlook towards Earth system modelling. Its applicability is demonstrated by testing several well-known benchmarks and large-scale problems, for which SERGHEI-SWE achieves excellent results for the different types of shallow-water problems. Finally, SERGHEI-SWE scalability and performance portability is demonstrated and evaluated on several TOP500 HPC systems, with very good scaling in the range of over 20 000 CPUs and up to 256 state-of-the art GPUs.

58 GEOSCIENCES↗

Historical and Future Changes in Air Pollutants from CMIP6 Models

Poor air quality is currently responsible for large impacts on human health across the world. In addition, the air pollutants ozone (O3) and particulate matter less than 2.5 µm in diameter (PM2.5) are also radiatively active in the atmosphere and can influence Earth's climate. It is important to understand the effect of air quality and climate mitigation measures over the historical period and in different future scenarios to ascertain any impacts from air pollutants on both climate and human health. The Coupled Model Intercomparison Project Phase 6 (CMIP6) presents an opportunity to analyse the change in air pollutants simulated by the current generation of climate and Earth system models that include a representation of chemistry and aerosols (particulate matter). The shared socio-economic pathways (SSPs) used within CMIP6 encompass a wide range of trajectories in precursor emissions and climate change, allowing for an improved analysis of future changes to air pollutants. Firstly, we conduct an evaluation of the available CMIP6 models against surface observations of O3 and PM2.5. CMIP6 models consistently overestimate observed surface O3 concentrations across most regions and in most seasons by up to 16 ppb, with a large diversity in simulated values over Northern Hemisphere continental regions. Conversely, observed surface PM2.5 concentrations are consistently underestimated in CMIP6 models by up to 10 µg m−3, particularly for the Northern Hemisphere winter months, with the largest model diversity near natural emission source regions. The biases in CMIP6 models when compared to observations of O3 and PM2.5 are similar to those found in previous studies. Over the historical period (1850–2014) large increases in both surface O3 and PM2.5 are simulated by the CMIP6 models across all regions, particularly over the mid to late 20th century, when anthropogenic emissions increase markedly. Large regional historical changes are simulated for both pollutants across East and South Asia with an annual mean increase of up to 40 ppb for O3 and 12 µg m−3 for PM2.5. In future scenarios containing strong air quality and climate mitigation measures (ssp126), annual mean concentrations of air pollutants are substantially reduced across all regions by up to 15 ppb for O3 and 12 µg m−3 for PM2.5. However, for scenarios that encompass weak action on mitigating climate and reducing air pollutant emissions (ssp370), annual mean increases in both surface O3 (up 10 ppb) and PM2.5 (up to 8 µg m−3) are simulated across most regions, although, for regions like North America and Europe small reductions in PM2.5 are simulated due to the regional reduction in precursor emissions in this scenario. A comparison of simulated regional changes in both surface O3 and PM2.5 from individual CMIP6 models highlights important regional differences due to the simulated interaction of aerosols, chemistry, climate and natural emission sources within models. The projection of regional air pollutant concentrations from the latest climate and Earth system models used within CMIP6 shows that the particular future trajectory of climate and air quality mitigation measures could have important consequences for regional air quality, human health and near-term climate. Differences between individual models emphasise the importance of understanding how future Earth system feedbacks influence natural emission sources, e.g. response of biogenic emissions under climate change.

Air pollutants↗

Biogeochemical Protocols and Diagnostics for the CMIP6 Ocean Model Intercomparison Project (OMIP)

The Ocean Model Intercomparison Project (OMIP) focuses on the physics and biogeochemistry of the ocean component of Earth system models participating in the sixth phase of the Coupled Model Intercomparison Project (CMIP6). OMIP aims to provide standard protocols and diagnostics for ocean models, while offering a forum to promote their common assessment and improvement. It also offers to compare solutions of the same ocean models when forced with reanalysis data (OMIP simulations) vs. when integrated within fully coupled Earth system models (CMIP6). Here we detail simulation protocols and diagnostics for OMIP's biogeochemical and inert chemical tracers. These passive-tracer simulations will be coupled to ocean circulation models, initialized with observational data or output from a model spin-up, and forced by repeating the 1948-2009 surface fluxes of heat, fresh water, and momentum. These so-called OMIP-BGC simulations include three inert chemical tracers (CFC-11, CFC-12, SF [subscript] 6) and biogeochemical tracers (e.g., dissolved inorganic carbon, carbon isotopes, alkalinity, nutrients, and oxygen). Modelers will use their preferred prognostic BGC model but should follow common guidelines for gas exchange and carbonate chemistry. Simulations include both natural and total carbon tracers. The required forced simulation (omip1) will be initialized with gridded observational climatologies. An optional forced simulation (omip1-spunup) will be initialized instead with BGC fields from a long model spin-up, preferably for 2000 years or more, and forced by repeating the same 62-year meteorological forcing. That optional run will also include abiotic tracers of total dissolved inorganic carbon and radiocarbon, CTabio and 14CTabio, to assess deep-ocean ventilation and distinguish the role of physics vs. biology. These simulations will be forced by observed atmospheric histories of the three inert gases and CO2 as well as carbon isotope ratios of CO2. OMIP-BGC simulation protocols are founded on those from previous phases of the Ocean Carbon-Cycle Model Intercomparison Project. They have been merged and updated to reflect improvements concerning gas exchange, carbonate chemistry, and new data for initial conditions and atmospheric gas histories. Code is provided to facilitate their implementation.

Carbon↗

Evaluating Mesoscale Convective Systems Over the US in Conventional and Multiscale Modeling Framework Configurations of E3SMv1

Organized mesoscale convective systems (MCSs) contribute a significant amount of precipitation in the Central and Eastern US during spring and summer, which impacts the availability of freshwater and flooding events. However, current global Earth system models cannot capture MCSs well and misrepresent the statistics of precipitation in the region. In this study, we investigate the representation of MCSs in three configurations of the Energy Exascale Earth System Model (E3SMv1) by tracking individual storms based on outgoing longwave radiation using a new application of TempestExtremes. Our results indicate that conventional parameterizations of convection, implemented in both low (LR; ~150 km) and high (HR; ~25 km) resolution configurations, fail to capture almost all MCS-like events, in-part because they underestimate high-level cloud ice associated with deep convection. On the other hand, the multiscale modeling framework (MMF; cloud-resolving models embedded in each grid-column of ~150 km resolution E3SMv1) configuration represents MCSs and their annual cycle better. Nevertheless, relative to observations, the E3SMv1-MMF spatial distribution of MCSs and associated precipitation is shifted eastward, and the diurnal timing is lagged. A comparison between the large-scale environment in E3SMv1-MMF and ERA5 reanalysis suggests that the biases during the summer in E3SMv1-MMF are associated with biases in low-level humidity and meridional moisture transport within the low-level jet. The fact that conventional parameterizations of convection, even with high-resolution, cannot capture MCSs over the US suggests that methods with explicit representation of kilometer-scale convective organization, such as the MMF, may be necessary for improving the simulation of these convective systems.

54 ENVIRONMENTAL SCIENCES↗

Biogeochemistry simulations for the Salt Marsh Accretion Response to Temperature eXperiment (SMARTX)

Coastal ecosystems have been largely ignored in Earth system models but are important zones for carbon and nutrient processing. Interactions between water, microbes, soil, sediments, and vegetation are important for mechanistic representation of coastal processes and ecosystem function. To investigate the role of these feedbacks, we used a reactive transport model (PFLOTRAN) that has the capability to be connected to the Energy Exascale Earth System Model (E3SM). PFLOTRAN was used to incorporate redox reactions and track chemical species important for coastal ecosystems as well as define simple representations of vegetation dynamics. Our goal was to incorporate oxygen flux, salinity, pH, sulfur cycling, and methane production along with plant-mediated transport of gases and tidal flux. Using porewater profile and incubation data for model calibration and evaluation, we were able to create depth-resolved biogeochemical soil profiles for saltmarsh habitat and use this updated representation to simulate direct and indirect effects of elevated CO2 and temperature on subsurface biogeochemical cycling. We found that simply changing the partial pressure of CO2 or increasing temperature in the model did not fully reproduce observed changes in the porewater profile, but the inclusion of plant or microbial responses to CO2 and temperature manipulations was more accurate in representing porewater concentrations. This indicates the importance of characterizing tightly coupled vegetation-subsurface processes for developing predictive understanding and the need for measurement of plant-soil interactions on the same time scale to understand how hotspots or moments are generated.Included in this data package are PFLOTRAN input (PFLOTRAN input files and chemical database) files for simulating single column biogeochemistry, root, and tide interactions at the Global Change Research Wetland (Kirkpatrick Marsh; Edgewater, MD). The biogeochemical network includes soil organic matter decomposition, nitrogen, iron, and sulfur cycling, and methanogenesis. Reduced species can be oxidized and plant processes include oxygen and nutrient priming, methane release, and nutrient uptake.Inputs:TAI_database.dat - geochemical database for reactions, more information on database structure and variables can be found here https://www.pflotran.org/documentation/user_guide/cards/pages/geochemical_database.htmlswamp.in - input file for biogeochemical network in PFLOTRANswamp_eCO2.in - input file for biogeochemical network in PFLOTRAN with input gas partial pressures/concentrations adjusted for elevated CO2 treatmentsOutputs:swamp_obs_0.tec - hourly porewater concentrations from from multiple depths in the soil columnswamp_eCO2_obs_0.tec - hourly porewater concentrations from multiple depths in the soil column for elevated CO2 treatmentsPFLOTRAN code access: https://github.com/fmyuan/pflotran-elm-interface.git

54 ENVIRONMENTAL SCIENCES↗

Atmospheric Radiation Measurement (ARM) Management Plan

Mission and Vision Statements for the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) Climate Research Facility Mission The ARM Climate Research Facility, a DOE scientific user facility, provides the climate research community with strategically located in situ and remote-sensing observatories designed to improve the understanding and representation, in climate and earth system models, of clouds and aerosols as well as their interactions and coupling with the Earth’s surface. Vision To provide a detailed and accurate description of the Earth atmosphere in diverse climate regimes to resolve the uncertainties in climate and Earth system models toward the development of sustainable solutions for the nation's energy and environmental challenges.

54 ENVIRONMENTAL SCIENCES↗

Green Ocean Amazon 2014/15 Terrestrial Ecosystem Project (Geco). Field Campaign Report

In conjunction with the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) Climate Research Facility GoAmazon campaign, the Terrestrial Ecosystem Science (TES)-funded Green Ocean Amazon (GoAmazon 2014/15) terrestrial ecosystem project (Geco) was designed to: evaluate the strengths and weaknesses of leaf-level algorithms for biogenic volatile organic compounds (BVOCs) emissions in Amazon forests near Manaus, Brazil, and conduct mechanistic field studies to characterize biochemical and physiological processes governing leaf- and landscape-scale tropical forest BVOC emissions, and the influence of environmental drivers that are expected to change with a warming climate.

54 ENVIRONMENTAL SCIENCES↗

Extending a land-surface model with <i>Sphagnum</i> moss to simulate responses of a northern temperate bog to whole ecosystem warming and elevated CO<sub>2</sub>

Abstract. Mosses need to be incorporated into Earth system models to better simulate peatland functional dynamics under the changing environment. Sphagnum mosses are strong determinants of nutrient, carbon, and water cycling in peatland ecosystems. However, most land-surface models do not include Sphagnum or other mosses as represented plant functional types (PFTs), thereby limiting predictive assessment of peatland responses to environmental change. In this study, we introduce a moss PFT into the land model component (ELM) of the Energy Exascale Earth System Model (E3SM) by developing water content dynamics and nonvascular photosynthetic processes for moss. The model was parameterized and independently evaluated against observations from an ombrotrophic forested bog as part of the Spruce and Peatland Responses Under Changing Environments (SPRUCE) project. The inclusion of a Sphagnum PFT with some Sphagnum-specific processes in ELM allows it to capture the observed seasonal dynamics of Sphagnum gross primary production (GPP) albeit with an underestimate of peak GPP. The model simulated a reasonable annual net primary production (NPP) for moss but with less interannual variation than observed, and it reproduced aboveground biomass for tree PFTs and stem biomass for shrubs. Different species showed highly variable warming responses under both ambient and elevated atmospheric CO2 concentrations, and elevated CO2 altered the warming response direction for the peatland ecosystem. Microtopography is critical: Sphagnum mosses on hummocks and hollows were simulated to show opposite warming responses (NPP decreasing with warming on hummocks but increasing in hollows), and hummock Sphagnum was modeled to have a strong dependence on water table height. The inclusion of this new moss PFT in global ELM simulations may provide a useful foundation for the investigation of northern peatland carbon exchange, enhancing the predictive capacity of carbon dynamics across the regional and global scales.

54 ENVIRONMENTAL SCIENCES↗