Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRONICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

The development programme of cathodes and electron guns for the Hollow Electron Lenses of the High Luminosity LHC project1

The High Luminosity LHC project (HL-LHC) foresees the construction and installation of important new equipment to increase the performance of the LHC machine. The Hollow Electron Lens (HEL) is a promising system to control the beam halo. It improves the beam collimation system of the HL-LHC and mitigates possible equipment damage in case of failure scenarios from halo losses. The halo can store up to 30 MJ energy. The specifications for this new device are quite demanding. The source, an electron gun with an annular shaped cathode, has to deliver a current up to 5 A. This is five times higher than the current in the existing electron lenses in Fermi and Brookhaven national laboratories. This note describes the programme carried out to design and test high-perveance guns equipped with two types of high-performance scandate cathodes. The size of the final gun is now considerably smaller than the one of the first prototype, allowing a reduction of diameter and cost of the superconducting magnet system used to steer the electron beam. The tests carried out at FNAL, BVERI and BJUT demonstrated that the developed cathodes fulfil the specifications and can supply a 5 A fully Space Charge Limited (SCL) current.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Optimizing the Design Tunes of the Electron Storage Ring of the Electron-Ion Collider

The Electron-Ion Collider (EIC) presently under construction at Brookhaven National Laboratory will collide polarized high energy electron beams with hadron beams with luminosities up to 10^34cm^{-2}s^{-1} in the center mass energy range of 20-140 GeV. Preliminary beam-beam simulations resulted in an optimum working point of (.08, .06) in the Electron Storage Ring (ESR). However, during the ESR polarization simulation study this working point was found to be less than optimal for electron polarization. In this article, we present beam-beam simulation results in a wide range tune scan to search for optimal ESR design tunes that are acceptable for both beam-beam and polarization performances.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Extraction and Injection in the Electron Injector for the Electron-Ion Collider

The electron injector for the Electron-Ion Collider (EIC) consists of a linear accelerator, a beam accumulation ring, and the Rapid Cycling Synchrotron (RCS) before the electrons are injected into the Electron Storage Ring (ESR) and collided. Extraction out of the RCS is complicated by limited space and the nominal beam pipe aperture, while injection into the ESR is complicated due to the limitation of kicker strength, so that the kickers will not impact the proton beam in the adjacent Hadron Storage Ring (HSR); additionally, the ESR kickers must also provide enough kick to the stored bunch for the swap-out scheme. This paper covers the injection into and extraction out of the RCS, as well as injection into the ESR, detailing layout, optics, and anticipated parameters of the septa and different kickers.

Deitrick, K. [Thomas Jefferson National Accelerato↗
DOE OSTI2023

Electron cloud thresholds at the arcs of the Electron-Ion Collider hadron storage ring

The Electron-Ion Collider is designed to provide high-luminosity collisions. For the highest lu minosity scenario, the hadron storage ring will host a 275 GeV beam consisting of 1160 bunches with 6.9e10 protons per bunch. Previous work has found that some sections of the hadron storage ring will experience electron cloud buildup if their vacuum chamber does not show a sufficiently low secondary electron emission value. This technical note reviews the electron cloud growth thresholds for the updated screen profile and lattice.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Electron cloud predictions for the Hadron Storage Ring of the Electron-Ion Collider and planned mitigations

This paper reports on a collection of electron cloud studies to determine the electron cloud threshold for different sections along the beampipe of the Hadron Storage Ring (HSR) for the Electron-Ion Collider (EIC), presents the results of a study of the interaction of the beam with the electron clouds, and discusses the limitation of potential solutions like scrubbing and Landau damping.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Impact of radiation on electronics and opto-electronics

In this chapter we will present the results of the impact of radiation on electronics and opto-electronics for two of the LHC experiments during Run 1 and Run 2. ATLAS results are presented in Section 6.1; CMS in Section 6.2. In Section 6.3 we will present a comparison between the two experiments, highlighting operational guidelines and proposing solutions to build the electronics and opto-electronics of the future LHC experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

High-brightness electron injectors for high-duty cycle X-ray free electron lasers

The successful development in the last two decades of X-ray free electron lasers (FELs) with their revolutionary brightness performance has been tightly dependent on the parallel development of electron guns and injectors capable of providing the high-brightness electron beams required by FELs lasing at these short wavelengths. The ultimate brightness delivered by a linear accelerator (linac) is already set at its injector and the remaining part of the accelerator can be only designed to preserve the injector performance. The technology to be used for the accelerator part of an X-Ray FEL strongly depends on the duty-cycle at which the FEL operates. Normal-conducting, room-temperature, copper-based radio frequency (RF) technology is typically used for low duty-cycles of up to approximately 10 −3 . For higher duty-cycles and up to continuous wave (CW) operation, the linac must rely on superconductive RF technology because, with the higher duty-cycle, the increasingly higher power dissipated in normal conducting RF structures becomes excessive for the warm technology. The situation changes in the lower energy part of the accelerator, where injector schemes, based on direct current, normal-conducting, and superconducting RF electron guns, are demonstrating the beam quality performance required by high-duty-cycle X-ray FELs. In this paper we start with a description of the requirements for such injectors, followed by an overview of the pursued technologies and schemes, and by a discussion on the main differences in terms of beam dynamics between low and high duty-cycle injectors.

Sannibale, Fernando↗
DOE OSTI2012

Studies of Conventional and ERL-Based Recirculator Electron Cooling for an Electron Ion Collider (Final Report)

We developed novel tools necessary for accurate and efficient modeling, simulation and design optimization of electron cooling options for a future Electron Ion Collider, or any other nuclear physics facility where high luminosity, low transverse and longitudinal emittance are required. The goals are being achieved by the combination of the development of a fast multipole method (FMM)-based algorithm for the N-body simulation required by the Coulomb interaction of ions and electrons, and the well-established transfer map-based methods available in several nonlinear beam dynamics codes. The new method will not only allow long-term tracking of the trajectories of the large number of charged particles necessary to achieve a high-fidelity, low-noise representation of the subtle physics involved in the mechanisms that lead to cooling, but will also make parameter optimization feasible in a context that includes all machine nonlinearities, misalignments, etc. The coding infrastructure is being implemented in COSY Infinity, which is already widely used in the nuclear physics community, and will serve as a resource for many current and future facilities that employ some form of electron cooling.

43 PARTICLE ACCELERATORS↗
DOE OSTI2013

Cooled electronic system with thermal spreaders coupling electronics cards to cold rails

Liquid-cooled electronic systems are provided which include an electronic assembly having an electronics card and a socket with a latch at one end. The latch facilitates securing of the card within the socket or removal of the card from the socket. A liquid-cooled cold rail is disposed at the one end of the socket, and a thermal spreader couples the electronics card to the cold rail. The thermal spreader includes first and second thermal transfer plates coupled to first and second surfaces on opposite sides of the card, and thermally conductive extensions extending from end edges of the plates, which couple the respective transfer plates to the liquid-cooled cold rail. The thermally conductive extensions are disposed to the sides of the latch, and the card is securable within or removable from the socket using the latch without removing the cold rail or the thermal spreader.

42 ENGINEERING↗
DOE OSTI2014

Copolymer semiconductors comprising thiazolothiazole or benzobisthiazole, or benzobisoxazole electron acceptor subunits, and electron donor subunits, and their uses in transistors and solar cells

The inventions disclosed, described, and/or claimed herein relate to copolymers comprising copolymers comprising electron accepting A subunits that comprise thiazolothiazole, benzobisthiazole, or benzobisoxazoles rings, and electron donating subunits that comprise certain heterocyclic groups. The copolymers are useful for manufacturing organic electronic devices, including transistors and solar cells. The invention also relates to certain synthetic precursors of the copolymers. Methods for making the copolymers and the derivative electronic devices are also described.

14 SOLAR ENERGY↗
DOE OSTI2017

System for cooling hybrid vehicle electronics, method for cooling hybrid vehicle electronics

The invention provides a single radiator cooling system for use in hybrid electric vehicles, the system comprising a surface in thermal communication with electronics, and subcooled boiling fluid contacting the surface. The invention also provides a single radiator method for simultaneously cooling electronics and an internal combustion engine in a hybrid electric vehicle, the method comprising separating a coolant fluid into a first portion and a second portion; directing the first portion to the electronics and the second portion to the internal combustion engine for a time sufficient to maintain the temperature of the electronics at or below 175.degree. C.; combining the first and second portion to reestablish the coolant fluid; and treating the reestablished coolant fluid to the single radiator for a time sufficient to decrease the temperature of the reestablished coolant fluid to the temperature it had before separation.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2019

System for cooling hybrid vehicle electronics, method for cooling hybrid vehicle electronics

The invention provides a single radiator cooling system for use in hybrid electric vehicles, the system comprising a surface in thermal communication with electronics, and subcooled boiling fluid contacting the surface. The invention also provides a single radiator method for simultaneously cooling electronics and an internal combustion engine in a hybrid electric vehicle, the method comprising separating a coolant fluid into a first portion and a second portion; directing the first portion to the electronics and the second portion to the internal combustion engine for a time sufficient to maintain the temperature of the electronics at or below 175° C.; combining the first and second portion to reestablish the coolant fluid; and treating the reestablished coolant fluid to the single radiator for a time sufficient to decrease the temperature of the reestablished coolant fluid to the temperature it had before separation.

France, David M.↗
DOE OSTI2018

Study of Electronic, Magnetic, and Thermoelectric Properties of 24 Valence-Electron Fe{sub 2}TiSn Heusler Compound Using Modified Becke-Johnson Scheme

The first-principle investigation of electronic and transport properties of 24 valence-electron Fe{sub 2}TiSn Heusler compound have been carried out using modified Becke-Johnson scheme. The compound possesses Fm-3m structure configuration in the ground state. Spin-polarized electronic calculations reveal Fe{sub 2}TiSn is a semiconductor in both the spin configurations with a total magnetic moment as 0μ{sub B}, which is consistent with the Slater-Pauling rule. The thermoelectric properties were calculated by means of the semiclassical Boltzmann transport theory. The average values of electrical conductivity, thermal conductivity, and Seebeck coefficient at 300, 600, and 900 K temperatures versus chemical potential are reported and discussed in detail. Further, the results show the possibility to create n-type and p-type thermoelectrics within one type of Heusler compound. The large Seebeck coefficient advocates the compounds to be good for thermoelectric applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Electron Tomography and Machine Learning for Understanding the Highly Ordered Structure of Leafhopper Brochosomes

Insects known as leafhoppers (Hemiptera: Cicadellidae) produce hierarchically structured nanoparticles known as brochosomes that are exuded and applied to the insect cuticle, thereby providing camouflage and anti-wetting properties to aid insect survival. Although the physical properties of brochosomes are thought to depend on the leafhopper species, the structure–function relationships governing brochosome behavior are not fully understood. Brochosomes have complex hierarchical structures and morphological heterogeneity across species, due to which a multimodal characterization approach is required to effectively elucidate their nanoscale structure and properties. In this work, we study the structural and mechanical properties of brochosomes using a combination of atomic force microscopy (AFM), electron microscopy (EM), electron tomography, and machine learning (ML)-based quantification of large and complex scanning electron microscopy (SEM) image data sets. This suite of techniques allows for the characterization of internal and external brochosome structures, and ML-based image analysis methods of large data sets reveal correlations in the structure across several leafhopper species. Our results show that brochosomes are relatively rigid hollow spheres with characteristic dimensions and morphologies that depend on leafhopper species. Nanomechanical mapping AFM is used to determine a characteristic compression modulus for brochosomes on the order of 1–3 GPa, which is consistent with crystalline proteins. Altogether, this work provides an improved understanding of the structural and mechanical properties of leafhopper brochosomes using a new set of ML-based image classification tools that can be broadly applied to nanostructured biological materials.

Chemical structure↗
DOE OSTI2023

Electron Microscopy Studies of Soft Nanomaterials

This review highlights recent efforts on applying electron microscopy (EM) to soft (including biological) nanomaterials. We will show how developments of both the hardware and software of EM have enabled new insights into the formation, assembly, and functioning (e.g., energy conversion and storage, phonon/photon modulation) of these materials by providing shape, size, phase, structural, and chemical information at the nanometer or higher spatial resolution. Specifically, we first discuss standard real-space two-dimensional imaging and analytical techniques which are offered conveniently by microscopes without special holders or advanced beam technology. The discussion is then extended to recent advancements, including visualizing three-dimensional morphology of soft nanomaterials using electron tomography and its variations, identifying local structure and strain by electron diffraction, and recording motions and transformation by in situ EM. On these advancements, we cover state-of-the-art technologies designed for overcoming the technical barriers for EM to characterize soft materials as well as representative application examples. Here, the even more recent integration of machine learning and its impacts on EM are also discussed in detail. With our perspectives of future opportunities offered at the end, we expect this review to inspire and stimulate more efforts in developing and utilizing EM-based characterization methods for soft nanomaterials at the atomic to nanometer length scales in academic research and industrial applications.

Imaging↗
DOE OSTI2012

Theoretical analysis of the sequential proton-coupled electron transfer mechanisms for H2 oxidation and production pathways catalyzed by nickel molecular electrocatalysts

The design of electrocatalysts for the oxidation and production of H2 is important for the development of alternative energy sources. This paper focuses on the electrocatalysts, where denotes 1,5-diaza-3,7-diphosphacyclooctane ligands with substituent groups R and R' covalently bound to the phosphorus and nitrogen atoms, respectively. Theoretical methods are used to investigate the mechanism of the step in the catalytic cycle corresponding to – e– → for H2 oxidation and the reverse reaction for H2 production. This step involves electron transfer (ET) between the Ni complex and the electrode as well as proton transfer (PT) between the Ni and the N. The sequential mechanisms, PT–ET and ET–PT, are investigated for the following (R,R’) substituents: (Me,Me), (Ph,Ph), and (Ph,Bz), where Me, Ph, and Bz denote methyl, phenyl, and benzyl substituents. Density functional theory is used to calculate reduction potentials, pKas, and PT pathways, and Marcus theory is used to describe the electrochemical electron transfer, including the effects of solute and solvent reorganization energies. For the (Ph,Ph) and (Ph,Bz) systems, the sequential PT–ET mechanism would require surmounting a large free energy barrier for the initial PT step, followed by thermodynamically favorable or thermoneutral ET. The sequential ET–PT mechanism for these systems would require a relatively large initial applied overpotential, followed by a PT reaction with a relatively low free energy barrier. Consistent with experimental data, the calculated overpotential required for the initial reduction in the ET–PT mechanism is lower for the (Ph,Bz) system than for the (Ph,Ph) system. The concerted mechanism, in which the electron and proton transfer simultaneously without a stable intermediate, may be thermodynamically favorable and is a direction of future research. This material is based upon work supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences under FWP56073.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Precision measurement of electron-electron scattering in GaAs/AlGaAs using transverse magnetic focusing

Electron-electron (e-e) interactions assume a cardinal role in solid-state physics. Quantifying the e-e scattering length is hence critical. In this paper we show that the mesoscopic phenomenon of transverse magnetic focusing (TMF) in two-dimensional electron systems forms a precise and sensitive technique to measure this length scale. Conversely we quantitatively demonstrate that e-e scattering is the predominant effect limiting TMF amplitudes in high-mobility materials. Using high-resolution kinetic simulations, we show that the TMF amplitude at a maximum decays exponentially as a function of the e-e scattering length, which leads to a ready approach to extract this length from the measured TMF amplitudes. The approach is applied to measure the temperature-dependent e-e scattering length in high-mobility GaAs/AlGaAs heterostructures. The simulations further reveal current vortices that accompany the cyclotron orbits - a collective phenomenon counterintuitive to the ballistic transport underlying a TMF setting.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Substituent effects in a series of 1,7-C[subscript 60](R[subscript F])[subscript 2] compounds (R[subscript F] = CF[subscript 3], C[subscript 2]F[subscript 5], n-C[subscrip 3]F[subscript 7], i-C[subscript 3]F[subscript 7], n-C[subscript 4]F[subscript 9], s-C[subscript 4]F[subscript 9], n-C[subscript 8]F[subscript 17]): electron affinities, reduction potentials and E(LUMO) values are not always correlated

A series of seven structurally-similar compounds with different pairs of R{sub F} groups were prepared, characterized spectroscopically, and studied by electrochemical methods (cyclic and square-wave voltammetry), low-temperature anion photoelectron spectroscopy, and DFT calculations (five of the compounds are reported here for the first time). This is the first time that a set of seven R{sub F} groups have been compared with respect to their relative effects on E{sub 1/2}(0/-), electron affinity (EA), and the DFT-calculated LUMO energy. The compounds, 1,7-C{sub 60}(R{sub F}){sub 2} (R{sub F} = CF{sub 3}, C{sub 2}F{sub 5}, i-C{sub 3}F{sub 7}, n-C{sub 3}F{sub 7}, s-C{sub 4}F{sub 9}, n-C{sub 4}F{sub 9} and n-C{sub 8}F{sub 21}), were found to have statistically different electron affinities (EA), at the {+-}10 meV level of uncertainty, but virtually identical first reduction potentials, at the {+-}10 mV level of uncertainty. The lack of a correlation between EA and E{sub 1/2}(0/-), and between E(LUMO) and E{sub 1/2}(0/-), for such similar compounds is unprecedented and suggests that explanations for differences in figures of merit for materials and/or devices that are based on equating easily measurable E{sub 1/2}(0/-) values with EAs or E(LUMO) values should be viewed with caution. The solubilities of the seven compounds in toluene varied by nearly a factor of six, but in an unpredictable way, with the C{sub 2}F{sub 5} and s-C{sub 4}F{sub 9} compounds being the most soluble and the i-C{sub 3}F{sub 7} compound being the least soluble. The effects of the different R{sub F} groups on EAs, E(LUMO) values, and solubilities should help fluorine chemists choose the right R{sub F} group to design new materials with improved morphological, electronic, optical, and/or magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗