Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRONIC MODULE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Feasibility of a multigroup Boltzmann–Fokker–Planck solution for electron beam dose calculations

Legacy nuclear-reactor Boltzmann solvers start clinical deployment as an alternative to Monte Carlo (MC) codes and Fermi–Eyges semiemprical models in radiation oncology treatment planning. Today’s certified clinical solvers are limited to photon beams. In this paper, ELECTR, a state-of-the-art multigroup electron cross sections generation module in NJOY is presented and validated against Lockwood’s calorimetric measurements, EGS-nrc and GEANT-4 for 1–20 MeV unidirectional electron beams. The nuclear-reactor DRAGON-5 solver is upgraded to access the library and solve the Boltzmann–Fokker–Planck (BFP) equation. A variety of heterogeneous radiotherapy and radiosurgery phantom configurations were used for validation purpose. Case studies include a thorax benchmark, that of a typical breast Intra-Operative Radiotherapy and a high-heterogeneity patient-like benchmark. For all beams, 100% of the water voxels satisfied the American Association of Physicists in Medicine accuracy criterion for a BFP-MC dose error below 2%. At least, 97.0% of adipose, muscle, bone, lung, tumor and breast voxels satisfied the 2% criterion. The average BFP-MC relative error was about 0.56% for all voxels, beams and materials combined. By irradiating homogeneous slabs from Z = 1 (hydrogen) to Z = 99 (einsteinium), we reported performance and defects of the CEPXS mode [US. Sandia National Lab., SAND-89-1685] in ELECTR for the entire periodic table. For all Lockwood’s benchmarks, NJOY-DRAGON dose predictions are within the experimental data precision for 98% of voxels.

42 ENGINEERING↗
DOE OSTI2011

Q-switching in the electron backward-wave oscillator

The use of Q-switching (periodical modulation of the feedback factor) is proposed for the electron backward-wave oscillator (BWO). This can be a way to realize regimes of a stable generation of periodical short high-power rf pulses with relatively high averaged efficiency. As compared to the conventional regime of the stable generation of a BWO with no feedback, in the Q-switched BWO the averaged electronic efficiency can be increased by an order of magnitude, whereas the peak power of output rf pulses is 40-50 times higher.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2011

A 6 kV arbitrary waveform generator for the Tevatron Electron Lens

This paper reports on a 6 kV modulator built and installed at Fermilab to drive the electron gun anode for the Tevatron Electron Lens (TEL). The TEL was built with the intention of shifting the individual (anti)proton bunch tunes to even out the tune spread among all 36 bunches with the desire of improving Tevatron integrated luminosity. This modulator is essentially a 6 kV arbitrary waveform generator that enables the TEL to define the electron beam intensity on a bunch-by-bunch basis. A voltage waveform is constructed having a 7 μs duration that corresponds to the tune shift requirements of a 12-bunch (anti)proton beam pulse train. This waveform is played out for any one or all three bunch trains in the Tevatron. The programmed waveform voltages transition to different levels at time intervals corresponding to the 395 ns bunch spacing. In addition, complex voltage waveforms can be played out at a sustained rate of 143 kHz over the full 6 kV output range. This paper describes the novel design of the inductive adder topology employing five transformers. It describes the design aspects that minimize switching losses for this multi-kilovolt, high repetition rate and high duty factor application.

43 PARTICLE ACCELERATORS↗
DOE OSTI2018

Lateral Shifts for Spin Electrons in a Hybrid Magnetic-Electric-Barrier Nanostructure Modulated by Spin-Orbit Couplings

We theoretically investigate how to modulate spin-dependent lateral shifts by the spin-orbit coupling (SOC) in a hybrid magnetic-electric-barrier (MEB) nanostructure, which can be experimentally realized by depositing a ferromagnetic (FM) stripe and a Schottky metal (SM) stripe on the top and bottom of the semiconductor heterostructure, respectively. Two kinds of ROCs, Rashba SOC (RSOC) and Dresselhaus SOC (DSOC), are taken into account fully. The Schrödinger equation of the spin electron in the hybrid MEB nanostructure is exactly solved by using the improved transfer-matrix method (ITMM), and the lateral shift and its spin polarization are numerically calculated with the help of the stationary phase method (SPM). Theoretical analysis indicates that the spin polarization effect in the lateral shift still exists in the hybrid MEB nanostructure when the SOCs are considered. Numerical simulations show that both magnitude and sign of the spin polarization effect in lateral shifts vary strongly with the strengths of RSOC and DSOC. These interesting features may offer an effective means to control the behavior of spin-polarized electrons in the semiconductor nanostructure, and such a hybrid MEB nanostructure serves as a SOC-manipulable spatial spin splitter for spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Electronically Nonadiabatic Structural Transformations Promoted by Electron Beams

The use of scanning transmission electron microscopes to manipulate substitutional defects in graphene has recently been demonstrated and modeled using ground state molecular dynamics, but the role of electronic excitations induced through inelastic electron scattering in promoting these transformations has so-far remained unexplored. In this work, probed are the effects of electronic excitation on the structural dynamics of graphene quantum dots of differing edge morphologies that are substitutionally doped with silicon or phosphorous. The ground and excited state potential energy barriers for pyramidal inversion of these nonplanar doped species are evaluated using time-dependent density functional theory. Optically bright excited states in which the barrier is decreased are identified in the low energy region of the electronic spectrum, suggesting that photoexcitation can modulate the reactivity of defects in graphene under electron beam irradiation. Coupling matrix elements between these inversion-favoring excited states and the ground state and time-domain simulations of the material's response to a point charge impulse indicate that focusing an electron beam near the defect can also lead to population of these states, implying that beam electrons incident on a defect can both excite the material to an inversion-favoring state and transfer momentum to the defect to initiate the inversion.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Defect-induced discriminative modulation of the highest occupied molecular orbital energies of graphene

Defects are capable of modulating various properties of graphene, and thus controlling defects is useful in the development of graphene-based devices. Here we present first-principles calculations, which reveal a new avenue for defect engineering of graphene: the modulation by defects on the highest occupied molecular orbital (HOMO) energy of a charged monolayer graphene quantum dot (GQD) is discriminative. When the charge of a GQD increases its HOMO energy also increases. Importantly, when the GQD contains one particular class of defects its HOMO energy is sometimes higher and sometimes lower than that of the corresponding GQD without any defects, but when the GQD contains another class of defects its HOMO energy is always higher or lower than that of the corresponding intact GQD as its excess charge reaches a critical value. This discriminative modulation could allow defect engineering to control secondary electron ejection in graphene, leading to a new way to develop graphene-based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Tunable High-Intensity Electron Bunch Train Production Based on Nonlinear Longitudinal Space Charge Oscillation

High-intensity trains of electron bunches with tunable picosecond spacing are produced and measured experimentally with the goal of generating terahertz (THz) radiation. By imposing an initial density modulation on a relativistic electron beam and controlling the charge density over the beam propagation, density spikes of several-hundred-ampere peak current in the temporal profile, which are several times higher than the initial amplitudes, have been observed for the first time. We also demonstrate that the periodic spacing of the bunch train can be varied continuously either by tuning launching phase of a radiofrequency gun or by tuning the compression of a downstream magnetic chicane. Narrow-band coherent THz radiation from the bunch train was also measured with μJ-level energies and tunable central frequency of the spectrum in the range of ~0.5 to 1.6 THz. Our results pave the way towards generating mJ-level narrow-band coherent THz radiation and driving high-gradient wakefield-based acceleration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2016

A Multi-Frequency Wide-Swath Spaceborne Cloud and Precipitation Imaging Radar

Microwave and millimeter-wave radars have proven their effectiveness in cloud and precipitation observations. The NASA Earth Science Decadal Survey (DS) Aerosol, Cloud and Ecosystems (ACE) mission calls for a dual-frequency cloud radar (W band 94 GHz and Ka-band 35 GHz) for global measurements of cloud microphysical properties. Recently, there have been discussions of utilizing a tri-frequency (KuKaW-band) radar for a combined ACE and Global Precipitation Measurement (GPM) follow-on mission that has evolved into the Cloud and Precipitation Process Mission (CaPPM) concept. In this presentation we will give an overview of the technology development efforts at the NASA Goddard Space Flight Center (GSFC) and at Northrop Grumman Electronic Systems (NGES) through projects funded by the NASA Earth Science Technology Office (ESTO) Instrument Incubator Program (IIP). Our primary objective of this research is to advance the key enabling technologies for a tri-frequency (KuKaW-band) shared-aperture spaceborne imaging radar to provide unprecedented, simultaneous multi-frequency measurements that will enhance understanding of the effects of clouds and precipitation and their interaction on Earth climate change. Research effort has been focused on concept design and trade studies of the tri-frequency radar; investigating architectures that provide tri-band shared-aperture capability; advancing the development of the Ka band active electronically scanned array (AESA) transmitreceive (TR) module, and development of the advanced radar backend electronics.

imaging↗
DOE OSTI2019

Acceleration of electrons in the interaction of a subterawatt laser pulse with a nonuniform plasma

We consider the effect of nonlinear self-focusing and self-modulation processes on the acceleration of electrons in the interaction of a subterawatt femtosecond laser pulse with a gas jet plasma. A three-dimensional particle-in-cell (3D PIC) simulation of the interaction of laser radiation with a low-density nonuniform plasma shows that laser pulse self-focusing that arises when the critical power of relativistic self-focusing determined by the local concentration of plasma electrons exceeds the pulse power results in efficient generation of a plasma wave. Due to a decrease in the phase velocity of the wake plasma wave generated via self-modulation of the laser pulse, electrons are trapped into the accelerating phase of the plasma wave and are accelerated to energies of ∼10 MeV. It is demonstrated that under the conditions for limiting the electrons’ acceleration region by the length of their dephasing, quasi-monoenergetic electron bunches with a characteristic energy of ∼9 MeV can be produced. The effective temperature of the accelerated electrons and their angular distribution, obtained by 3D PIC simulation, are in good agreement with those determined in the experiment. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Detection and Localization of Damaged Photovoltaic Cells and Modules Using Spread Spectrum Time Domain Reflectometry

The operating efficiency of photovoltaic (PV) plants can be improved if damaged or degraded modules can be detected and identified. Currently, string-level power electronics can detect problems with modules or cabling but not locate them, which would facilitate addressing these issues. Here, we investigate the ability of spread spectrum time domain reflectometry (SSTDR) to both detect and locate/identify damaged cells and modules within a series-connected PV string. We tested the ability of SSTDR to detect and locate single-cell mini-modules and full-sized PV modules, which were intentionally damaged by impacts with a hammer (breaking the glass and damaging the silicon below) or by cutting through some or all busbars. Damage to the glass and silicon of cells was detected and located within a small string of minimodules. Busbar damage was detectable only if an open was created by cutting through all intercell busbars. Furthermore, physical impact damage to the glass and silicon of a full-sized PV module could be detected, but further development of signal processing is needed to achieve localization of such damaged modules within a string.

14 SOLAR ENERGY↗
DOE OSTI2021

Controllable X-ray Pulse Trains from Enhanced Self-Amplified Spontaneous Emission

We report the demonstration of optical compression of an electron beam and the production of controllable trains of femtosecond, soft x-ray pulses with the Linac Coherent Light Source (LCLS) freeelectron laser (FEL). This is achieved by enhanced self-amplified spontaneous emission with a 2 μm laser and a dechirper device. Optical compression was achieved by modulating the energy of an electron beam with the laser and then compressing with a chicane, resulting in high current spikes on the beam which we observe to lase. A dechirper was then used to selectively control the lasing region of the electron beam. Field autocorrelation measurements indicate a train of pulses, and we find that the number of pulses within the train can be controlled (from 1 to 5 pulses) by varying the dechirper position and undulator taper. These results are a step toward attosecond spectroscopy with x-ray FELs as well as future FEL schemes relying on optical compression of an electron beam.

Duris, Joseph P↗
DOE OSTI2023

Coherent Phonon-Induced Modulation of Charge Transfer in 2D Hybrid Perovskites

Electron–phonon interactions play an essential role in charge transport and transfer processes in semiconductors. For most structures, tailoring electron–phonon interactions for specific functionality remains elusive. Here, it is shown that, in hybrid perovskites, coherent phonon modes can be used to manipulate charge transfer. In the 2D double perovskite, (AE2T) 2 AgBiI 8 (AE2T: 5,5“-diylbis(amino-ethyl)-(2,2”-(2)thiophene)), the valence band maximum derived from the [Ag 0.5 Bi 0.5 I4] 2– framework lies in close proximity to the AE2T-derived HOMO level, thereby forming a type-II heterostructure. During transient absorption spectroscopy, pulsed excitation creates sustained coherent phonon modes, which periodically modulate the associated electronic levels. Thus, the energy offset at the organic–inorganic interface also oscillates periodically, providing a unique opportunity for modulation of interfacial charge transfer. Density-functional theory corroborates the mechanism and identifies specific phonon modes as likely drivers of the coherent charge transfer. These observations are a striking example of how electron–phonon interactions can be used to manipulate fundamentally important charge and energy transfer processes in hybrid perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Influence of electron beam parameters on coherent electron cooling

Coherent electron cooling (CeC) promises to revolutionize the cooling of high energy hadron beams. The intricate dynamics of the CeC depends both on the local density and energy distribution of the beam. The variations of the local density (beam current) are inevitable in any realistic beam. Hence, in this paper we propose a novel method of beam conditioning. The conditioning provides compensation of effect from such variation by a correlated energy modulation. We use our analytical FEL model for an electron bunch with Gaussian line charge density and cosine-type energy variation along bunch. We analyze the phase variation between the electron density modulation at the exit of the FEL-amplifier and the ions inducing it in the modulator as a function of the peak current and the electron beam energy. Based on this analysis, electron bunch parameters for optimal CeC cooling are found numerically.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Quinary Defect-Rich Ultrathin Bimetal Hydroxide Nanosheets for Water Oxidation

The electronic structure of layered double hydroxides (LDHs) can be modulated by heteroatom doping and creating vacancies. The number of exposed active sites can be enriched by exfoliating the bulk structure into fewer layers. Herein, we successfully achieved multielement doping and exfoliation for Co 3 Fe LDHs by one SF 6 -plasma etching step at room temperature (named as Co 3 Fe LDHs-SF 6 ). The obtained Co 3 Fe LDHs-SF 6 ultrathin nanosheets display outstanding oxygen evolution reaction (OER) activity, which only needs 268 mV overpotential to reach 10 mA cm –2 . Tafel slope and charge transfer resistance are dramatically decreased indicating a faster reaction kinetic rate. Lastly, the excellent OER activity can be attributed to an increased number of active sites and an optimized electronic structure modulated by the incorporation of electron-withdrawing F, electron-donating S, and abundant vacancies resulting in proper adsorption energy to oxygen species.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Water accessibility in a membrane-inserting peptide comparing Overhauser DNP and pulse EPR methods

Water accessibility is a key parameter for the understanding of the structure of biomolecules, especially membrane proteins. Several experimental techniques based on the combination of electron paramagnetic resonance (EPR) spectroscopy with site-directed spin labeling are currently available. Among those, we compare relaxation time measurements and electron spin echo envelope modulation (ESEEM) experiments using pulse EPR with Overhauser dynamic nuclear polarization (DNP) at X-band frequency and a magnetic field of 0.33 T. Overhauser DNP transfers the electron spin polarization to nuclear spins via cross-relaxation. The change in the intensity of the {sup 1}H NMR spectrum of H{sub 2}O at a Larmor frequency of 14 MHz under a continuous-wave microwave irradiation of the nitroxide spin label contains information on the water accessibility of the labeled site. As a model system for a membrane protein, we use the hydrophobic α-helical peptide WALP23 in unilamellar liposomes of DOPC. Water accessibility measurements with all techniques are conducted for eight peptides with different spin label positions and low radical concentrations (10–20 μM). Consistently in all experiments, the water accessibility appears to be very low, even for labels positioned near the end of the helix. The best profile is obtained by Overhauser DNP, which is the only technique that succeeds in discriminating neighboring positions in WALP23. Since the concentration of the spin-labeled peptides varied, we normalized the DNP parameter ϵ, being the relative change of the NMR intensity, by the electron spin concentration, which was determined from a continuous-wave EPR spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2005

Medium power amplifiers covering 90 - 130 GHz for telescope local oscillators

This paper describes a set of power amplifier (PA) modules containing InP High Electron Mobility Transistor (HEMT) Monolithic Millimeter-wave Integrated Circuit (MMIC) chips. The chips were designed and optimized for local oscillator sources in the 90-130 GHz band for the Atacama Large Millimeter Array telescope. The modules feature 20-45 mW of output power, to date the highest power from solid state HEMT MMIC modules above 110 GHz.

coplanar waveguides↗
DOE OSTI2012

Search for annual modulation in low-energy CDMS-II data

We report limits on annual modulation of the low-energy event rate from the Cryogenic Dark Matter Search (CDMS II) experiment at the Soudan Underground Laboratory. Such a modulation could be produced by interactions from Weakly Interacting Massive Particles (WIMPs) with masses ~10 GeV/c^2. We find no evidence for annual modulation in the event rate of veto-anticoincident single-detector interactions consistent with nuclear recoils, and constrain the magnitude of any modulation to <0.06 event [keVnr kg day]^-1 in the 5-11.9 keVnr energy range at the 99% confidence level. These results disfavor an explanation for the reported modulation in the 1.2-3.2 keVee energy range in CoGeNT in terms of nuclear recoils resulting from elastic scattering of WIMPs at >98% confidence. For events consistent with electron recoils, no significant modulation is observed for either single- or multiple-detector interactions in the 3.0-7.4 keVee range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2012

Resolution study of higher-order-mode-based beam position diagnostics using custom-built electronics in strongly coupled 3.9-GHz multi-cavity accelerating module

Beam-excited higher order modes (HOMs) can provide remote diagnostics information of the beam position and cavity misalignment. In this paper we report on recent studies on the resolution with specially selected series of modes with custom-built electronics. This constitutes the first report of measurements of these cavities in which we obtained a resolution of 20 micron in beam offset. Details of the setup of the electronics and HOM measurements are provided.

43 PARTICLE ACCELERATORS↗