Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic Pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

A flutter investigation of all-moveable NASP-like wings at hypersonic speeds

Six alternative all-moving wing configurations applicable to the NASP hypersonic/transatmospheric vehicle have undergone aeroelasticity testing in NASA-Langley's Mach-20-capable Helium Tunnel that yielded data for such parametric variations as airfoil profile and wing planform, wing-pivot flexure stiffness, and mass imbalance. While all wings fluttered at dynamic pressures lower than predicted by second-order piston-theory aerodynamics, this was of limited amplitude, suggesting nonlinear external-flow behavior. Slab airfoils were more stable than diamond-shaped ones; blunt leading edges enhance stability relative to sharp ones, and stiffer pivolts extert a stabilizing influence.

Spain, Charles V.↗
NASA NTRS1993

Actuator and aerodynamic modeling for high-angle-of-attack aeroservoelasticity

Accurate prediction of airframe/actuation coupling is required by the imposing demands of modern flight control systems. In particular, for agility enhancement at high angle of attack and low dynamic pressure, structural integration characteristics such as hinge moments, effective actuator stiffness, and airframe/control surface damping can have a significant effect on stability predictions. Actuator responses are customarily represented with low-order transfer functions matched to actuator test data, and control surface stiffness is often modeled as a linear spring. The inclusion of the physical properties of actuation and its installation on the airframe is therefore addressed in this paper using detailed actuator models which consider the physical, electrical, and mechanical elements of actuation. The aeroservoelastic analysis procedure is described in which the actuators are modeled as detailed high-order transfer functions and as approximate low-order transfer functions. The impacts of unsteady aerodynamic modeling on aeroservoelastic stability are also investigated in this paper by varying the order of approximation, or number of aerodynamic lag states, in the analysis. Test data from a thrust-vectoring configuration of an F/A-18 aircraft are compared to predictions to determine the effects on accuracy as a function of modeling complexity.

Brenner, Martin J.↗
NASA NTRS1993

Interaction of solar wind with the magnetopause-boundary layer and generation of magnetic impulse events

The transport of mass, momentum, energy and waves from the solar wind to the Earth's magnetosphere takes place in the magnetopause-boundary layer region. Various plasma processes that may occur in this region have been proposed and studied. In this paper, we present a brief review of the plasma processes in the dayside magnetopause-boundary layer. These processes include (1) flux transfer events at the dayside magnetopause, (2) formation of plasma vortices in the low-latitude boundary layer by the Kelvin-Helmholtz instability and coupling to the polar ionosphere, (3) the response of the magnetopause to the solar wind dynamic pressure pulses, and (4) the impulsive penetration of solar wind plasma filaments through the dayside magnetopause into the magnetospheric boundary layer. Through the coupling of the magnetopause-boundary layer to the polar ionosphere, those above processes may lead to occurrence of magnetic impulse events observed in the high-latitude stations.

Lee, L. C.↗
NASA NTRS1993

A computational investigation of fuel mixing in a hypersonic scramjet

A parabolized, Navier-Stokes code, SHIP3D, is used to numerically investigate the mixing between air injection and hydrogen injection from a swept ramp injector configuration into either a mainstream low-enthalpy flow or a hypervelocity test flow. The mixing comparisons between air and hydrogen injection reveal the importance of matching injectant-to-mainstream mass flow ratios. In flows with the same injectant-to-mainstream dynamic pressure ratio, the mixing definition was altered for the air injection cases. Comparisons of the computed results indicate that the air injection cases overestimate the mixing performance associated with hydrogen injection simulation. A lifting length parameter, to account for the time a fluid particle transverses through the mixing region, is defined and used to establish a connection of injectant mixing in hypervelocity flows, based on nonreactive, low-enthalpy flows.

Fathauer, Brett W.↗
NASA NTRS1993

Electromagnetic ion cyclotron waves stimulated by modest magnetospheric compressions

AMPTE/CCE magnetic field and particle data are used to test the suggestion that increased hot proton temperature anisotropy resulting from convection during magnetospheric compression is responsible for the enhancement in Pc 1 emission via generation of electromagnetic ion cyclotron (EMIC) waves in the dayside outer equatorial magnetosphere. The relative increase in magnetic field is used to gauge the strength of the compression, and an image dipole model is used to estimate the motion of the plasma during compression. Proton data are used to analyze the evolution of the proton distribution and the corresponding changes in EMIC wave activity expected during the compression. It is suggested that enhancements in dynamic pressure pump the energetic proton distributions in the outer magnetosphere, driving EMIC waves. Waves are expected to be generated most readily close to the magnetopause, and transient pressure pulses may be associated with bursts of EMIC waves, which would be observed on the ground in association with ionospheric transient signatures.

Anderson, B. J.↗
NASA NTRS1993

Numerical study of the performance of swept, curved compression surface scramjet inlets

The paper describes a computational performance-enhancement study in which systematic modifications were applied to a planar-sidewall compression scramjet inlet operating at an entrance Mach number of 4 and at a dynamic pressure of 2040 lbs/sq ft, and the performance of the modified inlet was compared to that of the original geometry by evaluating numerical flowfield solutions. The planar-sidewall compression angle was modified as a function of height using sidewall curvature and simultaneously employing both forward-swept and reverse-swept compression surfaces. The results of calculations illustrate the feasibility of obtaining enhanced performance via contour modifications of a baseline swept-sidewall compression scramjet inlet operating at an entrance Mach number of 4.

Korte, John J.↗
NASA NTRS1993

State-constrained booster trajectory solutions via finite elements and shooting

This paper presents an extension of a FEM formulation based on variational principles. A general formulation for handling internal boundary conditions and discontinuities in the state equations is presented, and the general formulation is modified for optimal control problems subject to state-variable inequality constraints. Solutions which only touch the state constraint and solutions which have a boundary arc of finite length are considered. Suitable shape and test functions are chosen for a FEM discretization. All element quadrature (equivalent to one-point Gaussian quadrature over each element) may be done in closed form. The final form of the algebraic equations is then derived. A simple state-constrained problem is solved. Then, for a practical application of the use of the FEM formulation, a launch vehicle subject to a dynamic pressure constraint (a first-order state inequality constraint) is solved. The results presented for the launch-vehicle trajectory have some interesting features, including a touch-point solution.

Bless, Robert R.↗
NASA NTRS1924

Tests on a model of the D.F.W. airplane T-29 of the "Deutsche Flugzeug derke" (German airplane works)

Experiments similar to those carried out with the A.E.G (Allgemeine Elektrizitats-Gesellschaft) were made in the small wind tunnel of the Gottingen laboratory on a model of the D.F.W. airplane T-29. Three series of tests were carried out on the model with a velocity head (or dynamic pressure) of 5 kg/sq m (1.02 lb/sq ft), during which one of the movable surfaces was deflected at various angles, while both the others were retained in their central positions. Of special interest among the results of the tests is the different run of the elevating moments. The curves for the A.E.G. model, rising to the right, denote stability with the elevator locked, while the slight inclination to the left with the D.F.W model denotes a slight instability. For the maximum C(sub L) values, the stability of A.E.G. model continues to increase and the instability of the D.F.W. model is converted into stability. The rolling moments shown when the angular deflection of the ailerons is 0 degrees are due, in both series of tests, to the unequal distribution of the air velocity over the cross section of the wind tunnel, rather than to a lack of symmetry in the model.

Molthan, Wilhelm↗
NASA NTRS1938

Wind-tunnel Tests of a 2-engine Airplane Model as a Preliminary Study of Flight Conditions Arising on the Failure of the Engine

Wind tunnel tests of a 15-foot-span model of a two-engine low wing transport airplane were made as a preliminary study of the emergency arising from the failure of one engine in flight. Two methods of reducing the initial yawing moment resulting from the failure of one engine were investigated and the equilibrium conditions were explored for two basic modes on one engine, one with zero angle of sideslip and the other with several degrees of sideslip. The added drag resulting from the unsymmetrical attitudes required for flight on one engine was determined for the model airplane. The effects of the application of power upon the stability, controllability, lift, and drag of the model airplane were measured. A dynamic pressure survey of the propeller slipstream was made in the neighborhood of the tail surfaces at three angles of attack. The added parasite drag of the model airplane resulting from the unfavorable conditions of flight on one engine was estimated. From 35 to 50 percent of this added drag was due to the drag of the dead engine propeller and the other 50 to 65 percent was due to the unsymmetrical attitude of the airplane. The mode of flight on one engine in which the angle of sideslip was zero was found to require less power than the mode in which the angle of sideslip was several degrees.

Hartman, Edwin P↗
NASA NTRS1949

Further Experiments on the Flow and Heat Transfer in a Heated Turbulent Air Jet

Measurements have been made of the mean total-head and temperature fields in a round turbulent jet with various initial temperatures. The results show that the jet spreads more rapidly as its density becomes lower than that of the receiving medium, even when the difference is not sufficiently great to cause measurable deviations from the constant-density, dimensionless, dynamic-pressure profile function. Rough analytical considerations have given the same relative spread. The effective "turbulent Prandtl number" for a section of the fully developed jet was found to be equal to the true (laminar) Prandtl number within the accuracy of measurement. (author)

FLOW - JETS↗
NASA NTRS1953

Performance Characteristics of Plane-Wall Two-Dimensional Diffusers

Experiments have been made at Stanford University to determine the performance characteristics of plane-wall, two-dimensional diffusers which were so proportioned as to insure reasonable approximation of two-dimensional flow. All of the diffusers had identical entrance cross sections and discharged directly into a large plenum chamber; the test program included wide variations of divergence angle and length. During all tests a dynamic pressure of 60 pounds per square foOt was maintained at the diffuser entrance and the boundary layer there was thin and fully turbulent. The most interesting flow characteristics observed were the occasional appearance of steady, unseparated, asymmetric flow - which was correlated with the boundary-layer coalescence - and the rapid deterioration of flow steadiness - which occurred as soon as the divergence angle for maximum static pressure recovery was exceeded. Pressure efficiency was found to be controlled almost exclusively by divergence angle, whereas static pressure recovery was markedly influenced by area ratio (or length) as well as divergence angle. Volumetric efficiency. diminished as area ratio increased, and at a greater rate with small lengths than with large ones. Large values of the static-pressure-recovery coefficient were attained only with long diffusers of large area ratio; under these conditions pressure efficiency was high and. volumetric efficiency low. Auxiliary tests with asymmetric diffusers demonstrated that longitudinal pressure gradient, rather than wall divergence angle, controlled flow separation. Others showed that the addition of even a short exit duct of uniform section augmented pressure recovery. Finally, it was found that the installation of a thin, central, longitudinal partition suppressed flow separation in short diffusers and thereby improved pressure recovery

Reid, Elliott G↗
NASA NTRS1956

Theoretical and Experimental Investigation of the Subsonic-Flow Fields Beneath Swept and Unswept Wings with Tables of Vortex-Induced Velocities

The flow-field characteristics beneath swept and unswept wings as determined by potential-flow theory are compared with the experimentally determined flow fields beneath swept and unswept wing-fuselage combinations. The potential-flow theory utilized considered both spanwise and chordwise distributions of vorticity as well as the wing-thickness effects. The perturbation velocities induced by a unit horseshoe vortex are included in tabular form. The results indicated that significant chordwise flow gradients existed beneath both swept and unswept wings at zero lift and throughout the lift range. The theoretical predictions of the flow-field characteristics were qualitatively correct in all cases considered, although there were indications that the magnitudes of the downwash angles tended to be overpredicted as the tip of the swept wing was approached and that the sidewash angles ahead of the unswept wing were underpredicted. The calculated effects of compressibility indicated that significant increases in the chordwise variation of flow angles and dynamic-pressure ratios should be expected in going from low to high subsonic speeds.

Alford, William J., Jr.↗
NASA NTRS1957

Static Longitudinal and Lateral Stability Characteristics at Low Speed of 45 Degree Sweptback-midwing Models Having Wings with an Aspect Ratio of 2, 4, or 6

Results are presented of tests conducted in the Langley stability tunnel to determine the effects of various components and combinations of components on the static longitudinal and lateral stability characteristics at low speed of a series of 45 degree sweptback-midwing-airplane configurations having wings with an aspect ratio of 2, 4, or 6. The tests were made at a dynamic pressure of 24.9 pounds per square foot which corresponds to a Mach number of 0.13 and Reynolds numbers of 1.00 x 10(exp 6), 0.71 x 10 (exp 6), and 0.58 x 10 (exp 6) based on the respective wing mean aerodynamic chords. The angle-of-attack range covered was from -4 degrees to 32 degrees and the sideslip angles used for the lateral-derivative tests were 5 degrees and -5 degrees. An increasing loss in tail contribution to directional stability both with increasing wing aspect ratio and increasing angle of attack was found to be a principal cause of all the complete models becoming directionally unstable in the high angle-of-attack range.

STABILITY, LONGITUDINAL - STATIC↗
NASA NTRS1948

Flight measurement of the stability characteristics of the Douglas D-558-1 airplane (BuAero No. 37971) in sideslips

Measurements have been made of the stability characteristics of the D-558-1 airplane in steadily increasing sideslip at various Mach numbers from 0.50 to 0.80 at 10,000 feet altitude and at Mach numbers from 0.50 to 0.84 at 30,000 feet altitude. The results of these tests show that the apparent directional stability of the airplane is high and increases with increasing Mach number and dynamic pressure. The dihedral effect is positive at all speeds, there is little or no change in pitching moment with sideslip, and the cross-wind force is positive.

STABILITY, LATERAL - STATIC↗
NASA NTRS1926

Flight Tests on Airplanes

This report presents test procedures, methods, and instruments for flight testing of aircraft. Dynamic-pressure gauges are discussed at length.

FLIGHT TESTS↗
NASA NTRS1923

General biplane theory

This report deals with the air forces on biplane cellule. The first part of the report deals with the two-dimensional problem neglecting viscosity. The variation of the section, chord, gap, stagger, and decalage are investigated, a great number of examples are calculated, and all numerical results are given in tables. For the biplane without stagger it is found that the loss of lift in consequence of the mutual influence of the two wing sections is only half as much if the lift is produced by the curvature of the section as it is when the lift is produced by the inclination of the chord to the direction of motion. The second part deals with the influence of the lateral dimensions. It is found that the loss of lift due to induction is almost unchanged, whether the biplane is staggered or not. In the third part conclusions from previous investigations are drawn, viscosity and experimental experience are brought in, and the method is simplified for practical application. Simple formulas give the drag, lift, and moment. In order to make use of the simple formulas more convenient, tables for the dynamical pressure, induced drag, and angle of attack are added so that practically no computation is needed for the application of the results.

Munk, Max M↗
NASA NTRS1939

Design charts for predicting downwash angles and wake characteristics behind plain and flapped wings

Equations and design charts are given for predicting the downwash angles and the wake characteristics for power-off conditions behind plain and flapped wings of the types used in modern design practice. The downwash charts cover the cases of elliptical wings and wings of taper ratios 1, 2, 3, and 5, with aspect ratios of 6, 9, and 12, having flaps covering 0, 40, 70, and 100 percent of the span. Curves of the span load distributions for all these cases are included. Data on the lift and the drag of flapped airfoil sections and curves for finding the contribution of the flap to the total wing lift for different types of flap and for the entire range of flap spans are also included. The wake width and the distribution of dynamic pressure across the wake are given in terms of the profile-drag coefficient and the distance behind the wing. A method of estimating the wake position is also given. The equations and charts are based on theory that has been shown in a previous report to be in agreement with experiment.

Silverstein, Abe↗
NASA NTRS1946

Standard nomenclature for airspeeds with tables and charts for use in calculation of airspeed

Symbols and definition of various airspeed terms that have been adopted as standard by the NACA subcommittee on aircraft structural design are presented. The equations, charts, and tables required in the evaluation of true airspeed, calibrated airspeed, equivalent airspeed, impact and dynamic pressures, and Mach and Reynolds numbers have been compiled. Tables of the standard atmosphere to an altitude of 65,000 feet and a tentative extension to an altitude of 100,000 feet are given along with the basic equations and constants on which both the standard atmosphere and the tentative extension are based.

Aiken, William S , Jr↗