Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ductility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Chain rigidity controlled aggregation ability and solid-state microstructures for efficient stretchable conjugated polymer films

Stretchable conjugated polymer films with good electrical performance under mechanical deformation are highly desirable for soft electronics. However, the mechanical and electrical properties of these films, particularly in conjugated polymer:elastomer blends, are not fully understood at molecular level. Here, this study explores the relationships among molecular structure, aggregation ability, film microstructure, and the electrical/mechanical properties of three diketopyrrolopyrrole-based conjugated polymers (P1, P2, P3) with decreasing backbone rigidity and their corresponding polymer:elastomer blends. The most flexible polymer P3 shows strong aggregation, which forms highly crystalline fibers to produce fragile neat film and produces large isolated crystallites restricting charge transport in blend film. As chain rigidity increases, the P1 and P2 polymers show weaker aggregation, and produce smaller crystallites in neat films with enhanced ductility. P1 and P2 based blend films display nanocrystallites polymer networks with dispersed elastomer domains. As a result, we achieved near-constant charge mobility before and after stretching under 50 % strain for P2-based blend films with well-controlled pathways for both charge transport and energy dissipation. This study demonstrates the critical role of backbone rigidity in regulating the properties of stretchable conjugated polymer films, paving the way for more reliable and deformable materials in soft electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tuning gas separation performance of polyimide membranes with macrocyclic crown ether units

Membrane-based gas separation is an energy-efficient alternative to conventional thermally-driven separation processes. However, polymer membranes face the permeability-selectivity trade-off challenge, which stems from the broad size distribution of free volume voids. Here, this study reports a molecular design strategy to address this challenge through incorporating macrocyclic crown ether (CE) moieties into the backbone of Matrimid® polyimide, a commercial gas separation membrane. A series of CE-containing Matrimid®-like copolyimides were synthesized with systematically varied CE molar contents ranging from 3 to 20%. These copolyimides formed ductile, defect-free thin films suitable for membrane fabrication. Gas permeation tests revealed a non-monotonic relationship between permeability/selectivity and CE content. Notably, the copolyimide with only 5% CE demonstrated a 61% increase in CO 2 /CH 4 selectivity and a 13% increase in CO 2 permeability relative to pristine Matrimid®. Higher CE contents did not yield further performance improvements, which is likely due to the competing effects of chain packing disruption and π–π interactions among CE moieties at high content. This hypothesis was supported by wide-angle X-ray scattering (WAXS) analysis, density measurements, and fractional free volume calculations. These findings highlight the potential of macrocyclic crown ether incorporation strategies in fine tuning the microstructure of commercial polyimide gas separation membranes to surpass the traditional permeability-selectivity trade-off.

CO2 separation↗
DOE OSTI2024

Thermally stable and self-healable lignin-based polyester

The increased use of plastics and the associated environmental impact has catalyzed research on the development of bio-derived polymers. Bio-based polyesters have gained increased attention due to the abundance of their starting materials and ease of processing. Lignin is naturally occurring in biomass with rich carbon content, whose functionality and rigidity make it an ideal bio-derived candidate for bio-based polyesters. Herein, a lignin-based polyester with good thermal stability and self-repairability was synthesized from carboxylated lignin and epoxidized soybean oil. The synthesized lignin/epoxidized soybean oil (ESO) vitrimer was brittle such that its mechanical performance could not be recorded. However, when polyethylene glycol (PEG) was incorporated as a plasticizer, polymer samples exhibited acceptable ductility. From thermomechanical analysis of the synthesized polyesters, the plasticizer did not impair thermal stability of polymers, but greatly enhanced mechanical properties. Notably, all samples exhibited stability at high temperatures, and good glass transition temperatures (51.0 ± 0.9–78.0 ± 1.2 °C). The highest tensile strength (3.983 ± 0.1 MPa) and storage modulus (1463.67 ± 12.6 MPa) were recorded for the polyester containing 6 % w/w PEG. Moreover, the polymer samples exhibited self-healing capability at 180 °C. This work expands on valorization of lignin through the synthesis of bio-derived materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Conversion of real-world aluminum scrap streams into high-performance Al–Mg–Si–Cu automotive alloys using shear assisted processing and extrusion

The conversion of post-consumer aluminum (Al) scrap into usable Al alloys without adding primary Al is challenging because of excess impurities. In this work, >99% post-consumer Twitch, used beverage cans (UBCs), and remelt scrap ingots (RSIs) were used as feedstock materials. As-cast and solution heat-treated feedstock billets were extruded using Shear Assisted Processing and Extrusion (ShAPE) at ~510°C, followed by press quenching. To explore the development of the microstructure, texture, and underlying mechanisms and how they contribute to the overall strengthening in as-extruded and artificially aged samples, scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) were used to collect microstructure and texture data. The enhanced strength and ductility were corroborated with the microstructural features and crystallographic texture. Simple shear $\textrm{A}/\bar{\textrm{A}}$, $\textrm{A}_1^*/\textrm{A} _2^*$ texture components along with weak $\textrm{C}$ and $\textrm{B}/\bar{\textrm{B}}$ texture components were formed during extrusion; the texture was strengthened after heat treatment. The refined second-phase particles helped to retain the deformed microstructure and texture. The contributions of dislocation and precipitate strengthening were maximized when billets were solution-heat-treated prior to extrusion. This is attributed to the formation of effective supersaturated solid solutions during the ShAPE process, which precipitate out during the peak age treatment. Overall, the highest yield strength of 305 MPa, ultimate tensile strength of 350 MPa, and elongation of 12% were achieved in artificially aged samples, which are comparable to those of Al 6082-T6.

Al alloy↗
DOE OSTI2020

Tuning the Mechanical Properties of Shape Memory Metallic Glass Composites with Brick and Mortar Designs

We use molecular dynamics simulations to characterize the tensile deformation and failure of shape memory alloy-bulk metallic glass composites (BMGCs). As the failure in BMGCs shifts from the MG matrix to the second phase different strategies are required to further improve their mechanical properties. Results show that a staggered brick BMGC displays enhanced ductility with mild strength loss following a homogeneously distributed plasticity. This demonstrates that judiciously designed BMGCs can effectively synergize the mechanical properties of metallic glasses and shape memory alloys by effectively distributing stress and preventing the generation of critical shear bands and premature failure while preserving strength.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning the mechanical properties of nanoglass-metallic glass composites with brick and mortar designs

We use molecular dynamics simulations to characterize the tensile deformation and failure of metallic glass (MG)-nanoglass (NG) composites designed with a brick and mortar architecture consisting of a 3 nm-grain-size NG matrix and a MG second phase. Results show that the overall strength of the matrix is significantly improved by the second phase without sacrificing the large NG matrix ductility. The mechanical synergy of the two phases is optimized by arranging the MG bricks in a staggered way, which effectively delocalizes the plastic deformation, hindering the buildup of local stress hot spots and the generation of critical shear bands.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular dynamics simulation of vacancy and void effects on strain-induced martensitic transformations in Fe-50 at.% Ni model concentrated solid solution alloy

Strain-induced martensitic transformations can improve the strength and ductility of some face centered cubic (FCC) metals and alloys. Irradiation-induced defects such as vacancies, dislocation loops, and voids activate martensitic transformations over a wider range of mechanical loading conditions than in pristine material. Furthermore, the mechanisms underlying irradiation-enabled martensite transformations remain unclear. In this work, we use molecular dynamics simulations to study the effect of vacancies and voids on strain-induced martensitic transformations in a model concentrated solid solution alloy Fe-50 at.% Ni. It has been found that single vacancies have no resolvable effect on the transformation because they reduce the stacking fault energy by a relatively insignificant margin and do so only if the vacancy is located on the stacking fault plane. Voids, however, activate the martensite transformation through shear strain accumulation around the void due to dislocation pileup. The larger the void, the more pronounced this effect.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Strength stability at high temperatures for additively manufactured alumina forming austenitic alloy

Several fast-spectrum nuclear reactors designed to generate high power (~450 MWe) rely on forced convection of media such as supercritical CO 2 , sodium, or liquid lead to cool the nuclear core, operating at temperatures up to 600 °C. Cost-effective, high-strength Fe-based alumina forming austenitic (AFA) alloys are a promising candidate for the fabrication of critical nuclear components. This study investigated laser powder bed fusion (LPBF) processing of an AFA alloy composition optimized for improved creep resistance. Electron microscopy revealed an elongated grain structure along the build direction with a fine sub-grain cellular structure decorated with (Cr,Fe,Nb) 23 C 6 carbide precipitates at the intercellular boundaries. Finally, at temperatures of 20–900 °C, the LPBF alloy's superior tensile properties compared to its arc-melted counterpart and other advanced steels (e.g., SS316) were attributed to the distribution of nano-sized carbide precipitates, whereas the high ductility was attributed to the LPBF alloy's elongated grain structure.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Defect engineering in nickel via electrodeposition following low temperature annealing

Electrodeposited nickel coatings are characterized by high densities of crystalline defects including dislocations, growth twins, and hydrogen bubbles/voids, arising from the non-equilibrium nature of deposition. While these metastable features influence as-deposited properties, their evolution under low temperature annealing remains unexplored. Here, in this study, we demonstrate that low temperature annealing (200 °C) induces significant microstructural rearrangement without grain growth, enabling defect engineering through thermally assisted dislocation motion and twin boundary migration. Notably, we observe faceted twin boundaries and dislocation organization into extended networks, which have been rarely reported under such annealing conditions. These transformations are attributed to hydrogen-assisted defect mobility, facilitated by the release or redistribution of hydrogen trapped during deposition. These structural transformations correlate with a significant enhancement in mechanical properties, including a twofold increase in yield strength and improved ductility. Our findings highlight the role of trapped hydrogen in mediating low-temperature defect mobility and twin boundary evolution, offering a unique pathway for microstructural tuning of metallic coatings through controlled annealing.

36 - MATERIALS SCIENCE↗
DOE OSTI2021

Silver-carbon-nanotube composite metallization for increased durability of silicon solar cells against cell cracks

One of the ways to reduce the cost of solar electricity is to reduce the degradation rate of solar modules and extend their lifetime well beyond 30 years. The extended module lifetime translates to increased bankability of utility-scale PV projects. In this work, we specifically address cell-crack-induced degradation by introducing crack-tolerant metallization. Herein, we make use of low-cost, multi-walled carbon nanotubes embedded in commercial screen-printable silver pastes as a highly integratable engineering solution. When the carbon nanotubes are appropriately functionalized and incorporated into commercial silver pastes, the resulting metal contacts on solar cells, after screen-printing and firing, show exceptional fracture toughness. These composite metal contacts possess increased ductility, electrical gap-bridging capability greater than 50 µm, and “self-healing” to regain electrical continuity even after cycles of complete electrical failure under large strain. While providing crack-tolerant mechanical properties, the composite paste delivers similar beginning-of-life cell performance as the conventional silver paste.

14 SOLAR ENERGY↗
DOE OSTI2022

Mechanical and tribological properties of anodic Al coatings as a function of anodizing conditions

Enhanced wear and corrosion resistance properties are vital for numerous functional and decorative applications. Anodizing is a process frequently used to generate stable oxide coatings on metal surfaces, including aluminium (Al). In this work, we present an evaluation of process variables for optimized anodized coating properties using existing methods and as a baseline for novel coating development. A representative relatively pure Al alloy was chosen as a model system with a goal of finding conditions to achieve high wear coatings with retained ductility. AA5052 alloy coupons were anodized in two different electrolytes (sulfuric and phosphoric acid) to study the effects of anodizing conditions on the mechanical and tribological properties of the anodic coatings. Porosity was evaluated with microscopy, coating hardness was determined via nanoindentation, and tribological properties were characterized using a pin-on-disk tribometer. These measurements were correlated and a loading evaluation was performed to assess the optimum nanoindentation parameters for the use of representative coupons without the need for special processing prior to anodizing. The porosity and coating thickness were found to depend on the anodizing time and the type of electrolyte. Thicker and harder anodic coatings were generated in sulfuric acid compared to phosphoric acid. Porosity studies of the anodic coatings generated in phosphoric acid revealed that coating porosity decreased as the anodizing time increased. Both electrolytes generated anodic coatings with improved tribological properties (friction coefficient and dimensional wear rate), and an optimum processing time was identified for best wear properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental evaluation of direct current magnetron sputtered and high-power impulse magnetron sputtered Cr coatings on SiC for light water reactor applications

Two types of physical vapor deposition Cr coatings were deposited on chemical vapor deposited SiC coupons using conventional direct current magnetron sputtering (DCMS) and high-power impulse magnetron sputtering (HiPIMS) to mitigate the corrosion of SiC, an advanced fuel and structural material in light water nuclear reactor cores. Coating microstructure was characterized using scanning electron microscopy and scanning transmission election microscopy. X-ray diffraction analysis was conducted for phase identification and qualitative analysis of residual stresses. The mechanical integrity of the coatings was evaluated using scratch testing, micro-indentation, and nano-indentation tests. Additionally, the microstructure of the DCMS coating consisted of fine columnar grains with nanoscale intercolumnar channels, while the HiPIMS microstructure was denser and free of any columnar defects. The DCMS coating showed a small tensile residual stress, while the HiPIMS coating was under compressive stress. Both types of coatings showed good mechanical integrity in terms of ductility and adhesion to the substrate. Corrosion performance of the coatings was assessed with a 30-day high temperature water autoclave test. Both types of coatings formed a protective Cr 2 O 3 surface layer 20-30 nm thick during the autoclave test. In the DCMS coating, the columnar defects provided permeation pathways for water penetration resulting in oxide formation in the intercolumnar regions in the interior of the coating. Overall, both types of Cr coatings offer promise for the mitigation of hydrothermal corrosion of SiC in light water reactor operating environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Environmental life cycle impacts of small wastewater treatment plants: Design recommendations for impact mitigation

The objective of this study was to quantify potential mitigation of environmental impacts from the operation and construction of wastewater treatment plants (WWTP) from implementing specific design recommendations. The study investigated small WWTPs, many of which are serving slow growing or declining populations. Life Cycle Assessment methodology was used to evaluate and compare the inventory and environmental impacts of nine small WWTP case studies. Detailed inventory data was collected from the facilities’ engineering design plans and utility bills. One recommended practice was to avoid significant overdesign by planning for no lower than a 75% capacity utilization by the facilities’ end-of-life. A theoretical correction to a 75% capacity utilization was estimated to mitigate 0.4% of lifetime electricity usage and 1% of secondary process concrete for every 1% reduction in design average flow rate. Relatedly, a 0.4% mitigation in the Carcinogenic and Global Warming impacts could be achieved for every 1% reduction in design average flow toward a 75% capacity utilization. Other suggested practices were focused on conveyance, namely, to minimize non-process facility area and to use polyvinyl chloride pipe instead of ductile iron pipe where possible. Furthermore, the latter practice was estimated to mitigate between 1.1 and 4.8% of the Carcinogenic impact in the nine case studies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

A Chemocatalytic Route to Stereoregular Poly(3-hydroxyhexanoate) and Its Statistical and Tri-Block Copolymers

Poly(3-hydroxyhexanoate) (P3HHx)-based poly(3- hydroxyalkanoate)s (PHAs) are biologically produced, commercially implemented PHAs, but little is known in the open literature about the structure and property characterizations of discrete, authentic homopolymer P3HHx, and its copolymers with poly(3- hydroxybutyrate) (P3HB). Here, we introduce a chemocatalytic route to stereoregular (both isotactic and syndiotactic) P3HHx and PHA copolymers with P3HB, including statistical copolymer P3HBHx with various levels of 3HHx incorporation and discrete hard−soft−hard triblock copolymer P3HB-b-P3HHx-b-P3HB, and present extensive characterizations of their structures, thermal properties, and mechanical performance. The synthesis is efficiently achieved by one-pot polymerization of eight-membered di(n-propyl) and dimethyl (for copolymerization) diolides catalyzed by chiral molecular catalysts. Notably, P3HBHx can be rapidly produced in quantitative yield and exhibits high molar mass (M n up to 551 kg/mol) as well as both high modulus (up to 1.39 GPa) and ductility (up to 445%), while P3HB-b-P3HHx-b-P3HB further extends application temperature windows by possessing a unique combination of low T g (−18 °C) and high T m (154 °C) values. These findings highlight the stereomicrostructural and architectural versatility of chemocatalytic routes to PHAs, which, in turn, can be utilized to largely tune the PHA thermal properties and mechanical performance.

Biopolymers↗
DOE OSTI2023

Medium-Range Ordering in the Ionic Glass Electrolytes LiPON and LiSiPON

In this work, we provide an in-depth structural characterization of the amorphous ionic glasses LiPON and LiSiPON with high Li content. Based on ab initio molecular dynamics simulations, the structure of these materials is an inverted structure with either isolated polyanion tetrahedra or polyanion dimers in a Li+ matrix. Based on neutron scattering data, this type of inverted structure leads to a significant amount of medium-range ordering in the structure, as demonstrated by two sharp diffraction peaks and a periodic structural oscillation in the density function G(r). While this medium-range ordering is commonly observed in liquids and metallic glasses, it has not previously been observed in oxides. On a local scale, adding N and Si increases the number of anion bridges and polyanion dimer structures, leading to higher ionic conductivity. In the medium-range ordering, the addition of Si leads to more disorder in the polyanion substructure but a significant increase in the ordering of the O substructure. Finally, we demonstrate that this inverted structure with medium-range ordering results in a glassy material that is both mechanically stiff and ductile on the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Simulations of the Biodegradation of Citrate Based Polymers for Artificial Scaffolds Using Accelerated Reactive Molecular Dynamics

Here, we explore the reactivity and mechanical properties of poly(1,6-hexanediol-co-Citric acid) via ReaxFF molecular dynamics simulations. We implement an accelerated scheme within the ReaxFF framework to study the hydrolysis reaction of the polymer which is provided with sufficient amount of energy known as the restrain energy after a suitable pre-transition state configuration is obtained to overcome the activation energy barrier and the desired product is obtained. The validity of the ReaxFF force field is established by comparing the ReaxFF energy barriers of ester and ether hydrolysis with benchmark DFT values in literature. We perform chemical and mechanical degradation of polymer chain bundles at 300 K. We find that ester hydrolyzes faster than ether due to lower activation energy barrier of the reaction. The selectivity of the bond-boost scheme has been demonstrated by lowering the boost parameters of the accelerated simulation which almost stops the ether hydrolysis. Mechanical degradation of pre-hydrolyzed and intermittent hydrolyzed polymer bundles is performed along the longitudinal direction at two different strain rates. We find that the tensile modulus of the polymers are increases with increase in strain rates which shows that polymers show a strain dependent behavior. The tensile modulus of the Polyester-ether is higher than Polyester yet reaches yield-stress faster than Polyester. This makes Polyester more ductile than Polyester-ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Sulfurized Polyacrylonitrile (SPAN): Changes in Mechanical Properties during Electrochemical Lithiation

Sulfurized polyacrylonitrile (SPAN) is a promising material for stable lithium-sulfur (Li-S) batteries that can potentially satisfy the demand for high-density energy storage devices for electric vehicles (EVs). However, important physical and chemical properties of the SPAN cathode material are not yet well understood. For example, the SPAN mechanical behavior that depends on the structure and chemistry of the material generated during synthesis, and the mechanical response evolution during battery discharge have been scarcely investigated. This work addresses the effects of electrochemical lithiation on the SPAN mechanical integrity via uniaxial tensile loading tests using molecular dynamics with the ReaxFF potential. Here, we evaluate the volume expansion, Young’s modulus, yield strength, and ultimate tensile strength with increasing lithium contents. Our results show how the degree of graphitization of the carbonized skeleton impacts the SPAN ability to withstand the volume expansion-induced structural stresses upon lithiation. We describe the fracture mechanisms and find out a ductility loss with increasing lithium contents

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗