Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISCHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

A nonlinear electromagnetics model of an asymmetrically-driven, low pressure capacitive discharge

It is well-known that standing waves having radially center-high voltage profiles exist in high frequency driven capacitive discharges. Capacitive sheaths can also nonlinearly excite driving frequency harmonics near the series resonance that can be spatially near-resonant, and therefore enhance the on-axis power deposition. The powered-electrode/plasma/grounded-electrode sandwich structure of an asymmetrically excited cylindrical discharge forms a three electrode system in which both z-symmetric and z-antisymmetric radially propagating wave modes can exist. We develop a nonlinear electromagnetics model for this system with radially- and time-varying sheath widths, incorporating both symmetric and antisymmetric modes, and the plasma skin effect. Waves generated in the electrostatic wave limit are also treated. The discharge is modeled as a uniform density bulk plasma with either homogeneous or Child law sheaths at the electrodes, incorporating their nonlinear voltage versus charge relations. The model includes a finite power source resistance and a self-consistent calculation of the dc bias voltages. The resulting set of nonlinear partial differential equations is solved numerically to determine the symmetric and antisymmetric mode amplitudes and the nonlinearly-excited radially-varying harmonics. Two examples driven at lower frequency (30 MHz) or at higher frequency (60 MHz) are examined. The first case displays the excited dominant ninth harmonic near the series resonance frequency with the fundamental frequency having a weak standing wave. The higher frequency case shows a more obvious standing wave effect, enhanced by the nonlinear harmonics. Finally, the symmetric and antisymmetric modes are of similar amplitudes over the driving electrode, summing to give a larger bottom sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser beam coupling with capillary discharge plasma for laser wakefield acceleration applications

One of the most robust approaches, demonstrated to date, of accelerating electron beams by laser-plasma sources is the utilization of plasma channels generated by the capillary discharges. Although the spatial structure of the installation is simple in principle, there may be some important effects caused by the open ends of the capillary, by the supplying channels etc., which require a detailed 3D modeling of the processes. In the present work, such simulations are performed using the code MARPLE. First, the process of capillary filling with cold hydrogen before the discharge is fired, through the side supply channels is simulated. Second, the simulation of the capillary discharge is performed with the goal to obtain a time-dependent spatial distribution of the electron density near the open ends of the capillary as well as inside the capillary. Lastly, to evaluate the effectiveness of the beam coupling with the channeling plasma wave guide and of the electron acceleration, modeling of the laser-plasma interaction was performed with the code INF&RNO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transport modeling of convection dominated helicon discharges in Proto-MPEX with the B2.5-Eirene code

Data-constrained interpretative analyses of plasma transport in convection dominated helicon discharges in the Proto-MPEX linear device, and predictive calculations with additional Electron Cyclotron Heating/Electron Bernstein Wave (ECH/EBW) heating, are reported. The B2.5-Eirene code, in which the multi-fluid plasma code B2.5 is coupled to the kinetic Monte Carlo neutrals code Eirene, is used to fit double Langmuir probe measurements and fast camera data in front of a stainless-steel target. The absorbed helicon and ECH power (11 kW) and spatially constant anomalous transport coefficients that are deduced from fitting of the probe and optical data are additionally used for predictive simulations of complete axial distributions of the densities, temperatures, plasma flow velocities, particle and energy fluxes, and possible effects of alternate fueling and pumping scenarios. The somewhat hollow electron density and temperature radial profiles from the probe data suggest that Trivelpiece-Gould wave absorption is the dominant helicon electron heating source in the discharges analyzed here. There is no external ion heating, but the corresponding calculated ion temperature radial profile is not hollow. Rather it reflects ion heating by the electron-ion equilibration terms in the energy balance equations and ion radial transport resulting from the hollow density profile. With the absorbed power and the transport model deduced from fitting the sheath limited discharge data, calculated conduction limited higher recycling conditions were produced by reducing the pumping and increasing the gas fueling rate, resulting in an approximate doubling of the target ion flux and reduction of the target heat flux.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scaling of spoke rotation frequency within a Penning discharge

A rotating plasma spoke is shown to develop in two-dimensional full-sized kinetic simulations of a Penning discharge cross-section. Electron cross-field transport within the discharge is highly anomalous and correlates strongly with the spoke phase. Similarity between collisional and collisionless simulations demonstrates that ionization is not necessary for spoke formation. Parameter scans with discharge current I d , applied magnetic field strength B , and ion mass m i show that the spoke frequency scales with √ eE r L n /m i , where E r is the radial electric field, L n is the gradient length scale, and e is the fundamental charge. As a result, this scaling suggests that the spoke may develop as a non-linear phase of the collisionless Simon-Hoh instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of self-bias on cylindrical capacitive discharge for processing of inner walls of tubular structures—Case of SRF cavities

Cylindrical capacitive discharge is a convenient medium for generating reactive ions to process inner walls superconductive radio-frequency (SRF) cavities. These cavities, used in particle accelerators, present a three-dimensional structure made of bulk Niobium, with axial cylindrical symmetry. Manufactured cavity walls are covered with Niobium oxides and scattered particulates, which must be removed for desired SRF performance. Cylindrical capacitive discharge in a mixture of Ar and Cl 2 is a sole and natural non-wet acid choice to purify the inner surfaces of SRF cavities by reactive ion etching. Coaxial cylindrical discharge is generated between a powered inner electrode and the grounded outer electrode, which is the cavity wall to be etched. Plasma sheath voltages were tailored to process the outer wall by providing an additional dc current to the inner electrode with the help of an external compensating dc power supply and corrugated design of the inner electrode. The dc bias potential difference is established between two electrodes to make the set-up favorable for SRF wall processing. To establish guidelines for reversing the asymmetry and establishing the optimal sheath voltage at the cavity wall, the dc self-bias potential and dc current dependence on process parameters, such as gas pressure, rf power and chlorine content in the Ar/Cl 2 gas mixture was measured. In conclusion, the process is potentially applicable to all concave metallic surfaces.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fast sweeping probe system for characterization of spokes in E × B discharges

In this work, we developed a rapidly swept, back-to-back 100 kHz Langmuir probe system using a tunable compensating network to study the temporal evolution of low frequency oscillations in Penning discharges, Hall Thrusters, and other E × B discharges. Experimental validation of the probe system is performed at low and high sweeping frequencies in a stable Penning discharge. Then application of the probe system to measurements of plasma parameter fluctuations in a low frequency (4 kHz) rotating spoke and an analysis method using the Hilbert transform are shown. We proposs that the rotating spoke oscillation conducts approximately a third of the cross field current in our Penning device.

47 OTHER INSTRUMENTATION↗

Multi-mode ionization instability induced striations in RF driven He/H 2 O atmospheric pressure plasma (APP) discharges

Previously [E. Kawamura et al., Plasma Sources Sci. Technol. 25, 054009 (2016) and E. Kawamura et al., J. Phys. D: Appl. Phys. 50, 145204 (2017)], one dimensional (1D) particle-in-cell (PIC) simulations of 1 to 4mm gap, He/2%H 2 O atmospheric pressure plasma discharges showed an ionization instability resulting in bulk striations. Assuming that the ionization rate coefficient K iz is related to the root mean square electric field E by K iz &prop; E q , a striation theory showed that q<0 is a necessary condition for the instability. A local calculation yielded q>0, implying that nonlocal electron kinetics are required for the instability. Wider gaps can fit in a wider range of wavelengths, resulting in multi-mode striations. Previously, we assumed a single mean q value for each discharge, and did not calculate q for each mode separately. Here, we develop a wavelength resolved global striation model and apply it to 1D PIC simulations of 4mm gap discharges with input currents J rf = 0.04 to 0.30A/cm 2 . We first examine a base case at 0.23A/cm 2 and observe a mixture of unstable modes within a window of wavelengths λ. At shorter λ, the modes are suppressed by diffusion. At longer λ, we observe a transition to locality in which q becomes less negative with increasing λ, approaching its local positive value and stabilizing the modes. The window of unstable modes shifts to shorter λ with increasing J rf , causing the modes to be suppressed by diffusion at higher J rf . At lower J rf , the decrease in bulk plasma density with decreasing J rf suppresses the striations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical simulation of streamer evolution in surface dielectric barrier discharge with electrode-array

Atmospheric pressure surface dielectric barrier discharges (SDBDs) may be composed of streamers fast propagating along a dielectric surface in ambient air, producing reactive oxygen and nitrogen species, and inducing a force on the neutral gas, which can find applications, respectively, in plasma medicine and aerodynamics. In this work, a two-dimensional self-consistent fluid model was developed to study SDBDs with an electrode-array. Emphasis was placed on the interaction of counter-propagating streamers and discharge uniformity for different applied voltages and geometric configurations of the electrode-array. When two counter-propagating streamers collide, the streamers come to a stop within a certain (ultimate) distance between the streamer heads. Optimizing the applied voltages is a convenient way to improve uniformity, making the streamer heads reach a minimum distance between each other. Shortening the electrode spacing can simultaneously shorten the streamer length and the ultimate distance between streamers. Under certain discharge parameters (such as applied voltage), there exists an optimum electrode spacing maximizing uniformity.

42 ENGINEERING↗

Microtearing instabilities and electron thermal transport in low and high collisionality NSTX discharges

Microtearing mode (MTM) real frequency, growth rate, magnetic fluctuation amplitude and resulting electron thermal transport are studied in systematic NSTX scans of relevant plasma parameters. Here, the dependency of the MTM real frequency and growth rate on plasma parameters, suitable for low and high collision NSTX discharges, is obtained by using the reduced MTM transport model. The plasma parameter dependencies are compared and found to be consistent with the results obtained from MTM using the Gyrokinetic GYRO code. The scaling trend of collision frequency and plasma beta is found to be consistent with the global energy confinement trend observed in the NSTX experiment. The strength of the magnetic fluctuation is found to be consistent with the gyrokinetic estimate. In earlier studies, it was found that the version of the Multi-Mode (MM) anomalous transport model, which did not contain the effect of MTMs, provided an appropriate description of the electron temperature profiles in standard tokamak discharges and not in spherical tokamaks. When the MM model, which involves transport associated with MTMs, is incorporated in the TRANSP code and is used in the study of electron thermal transport in NSTX discharges, it is observed that the agreement with the experimental electron temperature profile is substantially improved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Combined microwave and laser Rayleigh scattering diagnostics for pin-to-pin nanosecond discharges

In this work, the temporal decay of electrons produced by an atmospheric pin-to-pin nanosecond discharge operating in the spark regime was measured via a combination of microwave Rayleigh scattering (MRS) and laser Rayleigh scattering (LRS). Due to the initial energy deposition of the nanosecond pulse, a variation in the local gas density occurs on the timescale of electron decay. Thus, the assumption of a constant collisional frequency is no longer applicable when electron number data are extracted from MRS measurements. Furthermore, to recalibrate MRS measurements throughout the electron decay period, temporally resolved LRS measurements of the local gas density were performed over the event duration. The local gas density was calculated to be 30% of the ambient level during the later stages of electron decay, and it recovers at about 1 ms after discharge. A shock front traveling approximately 500 m/s was additionally observed. Coupled with plasma volume calibration via temporally resolved intensified charge-coupled device imaging, the corrected decay curves of the electron number and electron number density are presented with a measured peak electron number density of 4.5 × 1015 cm -3 and a decay rate of ~(0.1–0.35) × 10 7 s -1 . A hybrid MRS and LRS diagnostic technique can be applied for a broad spectrum of atmospheric-pressure microplasmas where a variation in the gas number density is expected due to energy deposition in the discharge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Linear ion-scale microstability analysis of high and low-collisionality NSTX discharges and NSTX-U projections

Linear gyrokinetic simulations were conducted to investigate ion-gyroradius-scale micro-instability predictions for high-beta NSTX discharges and NSTX-U projections that span over an order of magnitude variation in collisionality. A complex mix of microtearing modes and hybrid trapped electron modes/kinetic ballooning modes (TEM/KBM) is predicted for all experimental or projected conditions. Ion temperature gradient (ITG) instabilities are typically stable in the NSTX discharges investigated, consistent with the observed neoclassical ion thermal transport. ITG thresholds inferred from the simulations are typically much higher than the experimental NSTX gradients, as well as the projected gradients in the NSTX-U scenario, which assumed ion temperatures limited by neoclassical transport only. The analysis suggests ITG instabilities are unlikely to contribute significant anomalous thermal losses in high-beta, lower collisionality NSTX-U scenarios. On the other hand, the NSTX experimental profiles and NSTX-U projections are predicted to be very close to the predicted onset of unstable KBM at most radii investigated. The proximity of the various discharges to the KBM instability threshold implies it may play an important role in setting profile shapes and limiting global energy confinement. Here, it remains to be understood and predicted how KBM contributes to multi-channel transport (thermal and particle transport, for both ions and electrons) in a way that is consistent with experimental inferences.

36 MATERIALS SCIENCE↗

Field reversal in low pressure, unmagnetized radio frequency capacitively coupled argon plasma discharges

In general, the radio frequency (rf) electric field within a sheath points toward the metal electrode in low pressure, unmagnetized rf electropositive capacitively coupled plasma (CCP) glow discharges. This is due to the large ratio of electron to ion mobility and the formation of an ion sheath. In this work, we studied, using fully kinetic particle-in-cell simulations, a reversed electric field induced by the strong secondary electron emission during the phase of sheath collapse in a high-voltage rf-driven low pressure CCP glow discharge. We explored the transition behavior of the formation of field reversal as a function of driving voltage amplitude and found that field reversal starts to form at around 750 V, for a discharge with an electrode spacing of 4 cm at 10 mTorr argon pressure driven at 13.56 MHz. Accordingly, the energy distribution function of electrons incident on the electrode shows peaks from around 3 to 10 eV while varying the driving voltage from 150 to 2000 V, showing potentially beneficial effects in plasma material processing where relatively directional electrons are preferred to solely thermal diffusion electrons.

Physics↗

Divertor detachment characterization in negative triangularity discharges in DIII-D via 2D edge-plasma transport modeling

Edge fluid modeling of the first divertor-plasma detachment experiments in negative triangularity (NT) discharges in the DIII-D tokamak is presented using the 2D multifluid edge transport code UEDGE, including cross-field particle drifts. Experiments were performed where the lower single-null magnetic equilibrium had a strong NT (δ≈−0.5), that is, where the magnetic X-point is at a larger major radius than the core magnetic axis. Divertor-plasma detachment was induced by increasing the core plasma density in DIII-D via intrinsic gas puffing. Here density scans are performed with UEDGE to reach a detached plasma and to quantitatively recover the experimental rollover of the ion saturation current on the outer divertor target plate. The simulations cover experiments with both signs of the toroidal magnetic field, B T , where the ion magnetic Grad-B drifts are directed into (forward B T ) and out of (reverse B T ) the divertor region. Consistent with experiments with neutral beam power injection, the NT simulations reproduce: 40% higher density is needed to reach detachment onset with forward B T compared with reverse B T , and the absence of deep detachment is found with reverse B T . Similarly, comparison between Ohmic discharges in NT and positive triangularity (PT) shaping confirms that a substantially higher density is needed to achieve detachment in NT than in PT, with NT requiring an line-average density of at least the Greenwald density or higher. Simulation results suggest that higher densities are needed to reach detachment in negative compared to PT because these discharges have a shorter midplane-to-target distance along the total magnetic field B, a shorter outer divertor poloidal leg length (0.06 m vs 0.2 m), and reduced radial transport [near-scrape-off layer (SOL) D ⊥ /χ ⊥ =0.3/0.5 vs D ⊥ /χ ⊥ =1.0/1.0, all in (m 2 /s)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-pulse-repetition-rate UV lasers with the inductance-capacitance discharge stabilisation

Compact high-pulse-repetition-rate XeF and KrF excimer lasers and an N{sub 2} laser with plate electrodes and the inductive-capacitance discharge stabilisation are studied. The composition and pressure of the active medium of lasers are optimised for obtaining the maximum output energy and maximum pulse repetition rate at comparatively low (no more than 19 m s{sup -1}) active-medium flow rates in the interelectrode gap. The pulse repetition rate achieved 4-5 kHz for the relative root-mean-square deviation of the laser pulse energy less than 2%. It is found that the energy of the N{sub 2}-laser pulses changes periodically under the action of acoustic perturbations appearing at high pulse repetition rates. It is shown that the use of the inductance-capacitance stabilisation of the discharge provides the increase in the maximum pulse repetition rate by 0.5-1.5 kHz (depending on the active medium type). It is found that the stability of the output energy and maximum pulse repetition rate depend on the location of preionisation sparks with respect to the gas flow direction. Some ways for the development of the technology of plate electrodes and inductance-capacitance discharge stabilisation are proposed. (lasers)

42 ENGINEERING↗

On stability of self-sustained volume discharge in working mixtures of non-chain electrochemical HF laser

Burning voltage of a self-sustained volume discharge (SSVD) is studied as a function of the specific energy deposition in SF{sub 5} with C{sub 2}-H{sub 6} and H{sub 2} mixtures, which are working media of a non-chain electrochemical HF laser. It is established that the voltage rises linearly with increasing the specific energy deposition, the relative voltage rise in the SF{sub 6}-C{sub 2}H{sub 6} mixtures being noticeably higher than in pure SF{sub 6} and SF{sub 6}-H{sub 2} mixtures. An assumption is suggested and substantiated on determining the role of molecule dissociation by the electron impact leading to the observed voltage rise. From experimental data we have found approximate energy expenditures of producing dissociation fragments including atomic fluorine in a discharge in pure SF{sub 6}: E-tilde {sub d}(F)= 5{+-}1 eV. The values of E{sub d} well agree with literature data obtained by other experimental methods. A conclusion is drawn that the dissociation process is the main mechanism limiting the current density, which implies SSVD realisation without preliminary gas ionisation in working mixtures of a non-chain HF laser and determines a higher stability of the volume discharge in mixtures of SF{sub 6} with hydrocarbons (deuterocarbons) as compared to mixtures with hydrogen (deuterium). A method is suggested and substantiated for numerical estimation of the limitation effect of the current density and its influence on the SSVD stability. (control of radiation parameters)

74 ATOMIC AND MOLECULAR PHYSICS↗

Feasibility of Recycling Discharged Microreactor Heavy Metal in Light Water and Sodium-Cooled Fast Reactors: A Neutronics Analysis

Nuclear microreactors (MRs) offer unique advantages, such as rapid deployment, potability, low maintenance requirements, and operational flexibility. Their compact size makes them a promising solution for decentralized power generation, particularly in remote areas, military bases, and disaster-stricken regions. However, MRs face challenges, including unutilized fissile material at the end of life, economic inefficiency, increased heavy metal (HM) waste complicating disposal, and the accumulation of plutonium (Pu) with high 239 Pu concentrations raising proliferation risks. Here, this study investigated the neutronics feasibility of a novel three-stage fuel cycle where discharged HM from MRs is recycled and burned in light water reactors and sodium-cooled fast reactors. This approach converts discharged HM into valuable fuel, enhancing the efficiency of MR deployments while improving the safeguardability of their final waste products. Neutronics analysis demonstrated that the safety characteristics of reactor designs in each stage were minimally impacted by the proposed cycle. For two representative MR designs, a fast-spectrum MR with solid pellet fuel and a thermal-spectrum MR with TRISO (TRi-structural-ISOtropic) fuel compacts, the proposed fuel cycle reduced the uranium disposal mass flow rate by ~60%, decreased the 235 U enrichment of the discharge fuel to ~1 wt%, eliminated plutonium disposal, and increased the cumulative fuel burnup to ~580 gigawatt-day per metric ton of initial heavy metal (GWd/t-iHM) or 60% fissions per initial metal atom. Despite the significant differences between the two MR designs, the performance and infrastructure requirements of the developed fuel cycles were remarkably similar, indicating its generalizability to a broader class of MRs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Confinement degradation by Alfvén-eigenmode induced fast-ion transport in steady-state scenario discharges

Here, analysis of neutron and fast-ion D α data from the DIII-D tokamak shows that Alfvén eigenmode activity degrades fast-ion confinement in many high β N , high q min , steady-state scenario discharges. (β N is the normalized plasma pressure and q min is the minimum value of the plasma safety factor.) Fast-ion diagnostics that are sensitive to the co-passing population exhibit the largest reduction relative to classical predictions. The increased fast-ion transport in discharges with strong AE activity accounts for the previously observed reduction in global confinement with increasing q min ; however, not all high q min discharges show appreciable degradation. Two relatively simple empirical quantities provide convenient monitors of these effects: (1) an 'AE amplitude' signal based on interferometer measurements and (2) the ratio of the neutron rate to a zero-dimensional classical prediction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-dimensional optical and laser-based diagnostics of low-temperature ionized plasma discharges

In this paper, a review of work centered on the utilization of multi-dimensional optical diagnostics to study phenomena arising in radiofrequency plasma discharges is given. The diagnostics range from passive techniques such as optical emission to more active techniques utilizing nanosecond lasers capable of both high temporal and spatial resolution. In this review, emphasis is placed on observations that would have been more difficult, if not impossible, to make without the use of such diagnostic techniques. Examples include the sheath structure around an electrode consisting of two different metals, double layers that arise in magnetized hydrogen discharges, or a large region of depleted argon 1s 4 levels around a biased probe in an rf discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗