Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Concept of Operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Creating Systems Engineering Products with Executable Models in a Model-Based Engineering Environment

Applying systems engineering across the life-cycle results in a number of products built from interdependent sources of information using different kinds of system level analysis. This paper focuses on leveraging the Executable System Engineering Method (ESEM) which automates requirements verification (e.g. power and mass budget margins and duration analysis of operational modes) using executable SysML models. The particular value proposition is to integrate requirements, and executable behavior and performance models for certain types of system level analysis. The models are created with modeling patterns that involve structural, behavioral and parametric diagrams, and are managed by an open source Model Based Engineering Environment (named OpenMBEE). This paper demonstrates how the ESEM is applied in conjunction with OpenMBEE to create key engineering products (e.g. operational concept document) for the Alignment and Phasing System (APS) within the Thirty Meter Telescope (TMT) project, which is under development by the TMT International Observatory (TIO).

MBSE↗
NASA NTRS2014

Comparative Analysis of Static and Dynamic Probabilistic Risk Assessment

Implementation of risk-informed design allows the design team to thoroughly explore the risks of a system while iterating the operations concept, design, and requirements until the system meets mission objects and is achievable within constraints. To arrive at a space system design that is likely to meet all constraints placed upon mass, cost, performance and risk, the system requirements must be understood and traded against each other as early as the conceptual design phase. Depending on the project phase and the goals of the risk analysis, various PRA methodologies could be used to produce quantitative risk estimates to enable such a process. In order to better understand the applicability, advantages, and limitations of various PRA methodologies, a comparative analysis of three bottom-up, component-based PRA approaches was performed. The three methods examined are a traditional static fault tree, a fault tree hybrid, and a dynamic Monte Carlo simulation. Each approach was used to assess a generic reaction control system (RCS) thruster pod and mission. The methods are assessed in terms of the process of modeling a system, the actionable information produced for the design team, and the overall fidelity of the quantitative risk evaluation generated. The paper also discusses the applicability of each methodology to the different phases of system development.

Probablistic↗
NASA NTRS2016

Application of Model-Based Systems Engineering for the Development of the Asteroid Redirect Robotic Mission

Model-Based Systems Engineering (MBSE) can augment existing Systems Engineering (SE) processes to more efficiently deliver enhanced products over the project life cycle. Using a multi-user accessible System Model, MBSE has been successfully deployed for the conceptual and preliminary design development of the Asteroid Redirect Robotic Mission (ARRM). The paper provides an overview and examples of the targeted MBSE deployment for development of the mission operational concept, system description, and functional requirements. The paper also includes description of the challenges and lessons learned.

Sindiy, Oleg V.↗
NASA NTRS2015

Integration of Dynamic Weather Routes Automation with Air/Ground Data Communications

The Dynamic Weather Routes (DWR) toolcontinuously and automatically analyzes airborne flights in en route airspace to identify flights where a route correction could save significant flight time and still avoid weather. A partnership between NASA, American Airlines (AA), and the FAA has enabled testing of DWR in real-world air traffic operations. En route Data Communications (Data Comm) could significantly reduce the controller and pilot workload needed to communicate DWR route changes under today’s voice-based operations and thereby enable more timely and frequent high-value corrections to weather avoidance routes. Sample data from the DWR trial at AA illustrate how Data Comm could improve DWR operations. Two operating concepts that integrate DWR with Data Comm are described:(1) route corrections are initiated by air traffic control and implemented using Airborne Reroutes and Data Comm, and (2) route corrections are initiated by the dispatcher and pilot and implemented via Data Comm. Both concepts align with Federal Aviation Administration (FAA) plans for implementation ofData Comm in en route airspace.

weather avoidance↗
NASA NTRS2017

Current Safety Nets Within the U.S. National Airspace System

There are over 70,000 flights managed per day in the National Airspace System, with approximately 7,000 aircraft in the air over the United States at any given time. Operators of each of these flights would prefer to fly a user-defined “4D” trajectory (4DT), which includes arrival and departure times; preferred gates and runways at the airport; efficient, wind-optimal routes for departure, cruise and arrival phase of flight; and fuel efficient altitude profiles. To demonstrate the magnitude of this achievement a single flight from Los Angeles to Baltimore, accesses over 35 shared or “constrained” resources that are managed by roughly 30 air traffic controllers (at towers, approach control and en route sectors); along with traffic managers at 12 facilities, using over 22 different, independent automation system (including TBFM, ERAM, STARS, ASDE-X, FSM, TSD, GPWS, TCAS, etc.). In addition, dispatchers, ramp controllers and others utilize even more systems to manage each flight’s access to operator-managed resources. Flying an ideal 4DT requires successful coordination of all flight constraints among all flights, facilities, operators, pilots and controllers. Additionally, when conditions in the NAS change, the trajectories of one or more aircraft may need to be revised to avoid loss of flight efficiency, predictability, separation or system throughput. The Aviation Safety Network has released the 2016 airliner accident statistics showing a very low total of 19 fatal airliner accidents, resulting in 325 fatalities1. Despite several high profile accidents, the year 2016 turned out to be a very safe year for commercial aviation, Aviation Safety Network data show. Over the year 2016 the Aviation Safety Network recorded a total of 19 fatal airliner accidents [1], resulting in 325 fatalities. This makes 2016 the second safest year ever, both by number of fatal accidents as well as in terms of fatalities. In 2015 ASN recorded 16 accidents while in 2013 a total of 265 lives were lost. How can we keep it that way and not upset the apple cart by premature insertion of innovative technologies, functions, and procedures? In aviation, safety nets function as the last system defense against incidents and accidents. Current ground-based and airborne safety nets are well established and development to make them more efficient and reliable continues. Additionally, future air traffic control safety nets may emerge from new operational concepts.

Smith, Brian E.↗
NASA NTRS2019

An Update on the CCSDS Optical Communications Working Group Interoperability Standards

International space agencies around the world are working together in the Interagency Operation Advisory Group (IOAG) and the Consultative Committee for Space Data Systems (CCSDS) to develop interoperability standards for optical communications. The standards support optical communication systems for both Near Earth and Deep Space robotic and human-rated spacecraft. The standards generally address both free space links between spacecraft and free space links between spacecraft and ground. This paper will overview the history and structure of the CCSDS Optical Communications Working Group and provide an update on the set of optical communications standards being developed. The paper will address the ongoing work on High Photon Efficiency communications, High Data Rate communications, and Optical On/Off Keying communications. It will also cover the working being done within CCSDS on documenting atmospheric measurement techniques and link operations concepts.

Edwards, Bernard L.↗
NASA NTRS2020

Ground System Milestones: 20 Years of Earth Observing Satellite Mission Operations

Aqua, Aura, and Terra are Earth observing satellites that serve in the Earth Observing System (EOS). Terra, the flagship mission of the EOS, was launched in 1998. Aqua was launched in 2002 and Aura was launched in 2004. Each spacecraft was designed for a 6 year lifespan. Currently, each spacecraft meets all mission and science requirements. As technology advances, the onboard hardware and software remain the same, however, our ground system progresses. In the past twenty years, many changes have taken place. Our goal is to describe the life of the ground system from launch, to present day, and touch on our future plans. The focus of our presentation will be how EOS has and continues to modernize our ground system for the future. We would like to share our experiences and give insight into the operational challenges of a 20 year old ground system. Our hope is for future mission operators and those maintaining potential age defying satellites to use our past experiences and lessons learned for future operational concepts.

Barrett, Grant↗
NASA NTRSDate not supplied

WFIRST CGI: Prism and Polarizer Characterization Modes

As part of its technology demonstration, the WFIRST coronagraph instrument (CGI) will demonstrate point source spectroscopy and polarization measurements of disks. The specific implementation of spectroscopy is a zero-deviation Amici prism and slit to be placed on the planet after high contrast has been achieved by CGI. The polarization optics are a set of Wollaston prisms so that orthogonal polarization states can be measured simultaneously. The CGI spectral characterization mode, being designed and built and Goddard Space Flight Center (GSFC), has a spectral resolution of R50 and is designed to accommodate a 15% bandpass spanning 610-785nm. In order to recover Stokes information, there are two sets of Wollaston prisms clocked 45 degrees with respect to one another with each measurement taken in series. The Wollaston design and optical elements are a contribution by the Japanese Aerospace Exploration Agency, with final alignment and testing being done at GSFC. The spectroscopy mode is designed to target Methane absorption features around 730nm, keeping the spectral resolution as low as possible to improve the signal-to-noise ratio and hence reduce detection time. We highlight the requirements for these modes and address the challenge of on-orbit spectral calibration for a deployable slit in the presence of pointing drifts. Of unique interest is how the observatory error budget couples into good stellar spectrum calibration and subsequent speckle subtraction. We also provide further detail on the optomechanical design, its stability based on thermal and structural predictions, modeled performance, and operations concept. These performance metrics are simulated to demonstrate how a slit located at an arbitrary field point is homed onto the planet and converted to a calibrated spectrum.

Tyler D Groff↗
NASA NTRSDate not supplied

The WFIRST CGI Integral Field Spectrograph: Requirements and Performance Predictions

The WFIRST coronagraphic instrument (CGI) will demonstrate exoplanet spectroscopy using an integral field spectrograph (IFS). The CGI IFS, being designed and built at Goddard Space Flight Center, has a spectral resolution of R50 and is designed to accommodate a 20% bandpass spanning 600- 970 nm. The IFS is principally targeting the abundance of Methane features, with the primary coronagraph band being centered around 770nm. Key to the performance estimates are the achievable signal-to-noise (SNR) ratios and the stability of the microspectra over the course of tens and hundreds of hours. As a technology demonstration for CGI, the ability to close a wavefront control loop around the IFS, maintain a stable dark hole, and provide time resolved data that simultaneously spans spatial and spectral dimensions are crucial demonstrations for future observatories. The IFS is optimized both for coronagraphs and science observations with a potential future starshade. We highlight how the long duration observations, and requirements for both starshades and coronagraphs drive the IFS requirements and the calibrations required both onorbit and on the ground. We also provide further detail on the optomechanical design, its stability based on thermal and structural predictions, anticipated performance, and operations concept of the CGI IFS. The impact of these performance metrics are projected into simulated data products, demonstrating cube extraction of noisy images and the subsequent planet spectrum that can be extracted from them. These demonstrations and performance predictions are key to future missions such as LUVOIR and HabEx, whose principal science case relies on efficient spectroscopy of exoplanets.

Tyler Groff↗
NASA NTRSDate not supplied

Space Communications in Support of the Artemis Program

NASA has been challenged to send the first woman and first person of color to the South Pole of the moon by 2024. Named the Artemis Program, this effort serves as a proving ground for the greater Moon-to-Mars campaign and establishes a lunar outpost by 2028. The Artemis Program relies on simultaneous operation of multiple flight assets separated by large angular distances that require a unique communication strategy and is a departure from the previous Apollo-era architecture. NASA’s Space Communications and Navigation (SCaN) Program is designing a scalable, extensible, and reusable network architecture to provide communication and navigation services in support of lunar exploration. This architecture serves at the foundational infrastructure, paving the way for future exploration of Mars. In pursuance of this new architecture, the SCaN Program is augmenting NASA’s space communications networks by upgrading the current 34-meter beam waveguide antenna systems and incorporating an 18-meter class subnet. This paper presents an overview of NASA’s plans to provide high data rate communication and navigation services for lunar exploration efforts including: operations concepts to support the lunar communications architecture, major network enhancements and new capabilities, and a Mars-forward approach that maximizes the reuse of these capabilities. Capabilities include:(1) Delay/Disruption Tolerant Networking (DTN), (2) Multiple Spacecraft Per Aperture (MSPA, also known as Multiple Spacecraft Per Antenna), and (3) Simultaneous Ka-band uplink and downlink. The mid-2020s era is a historic opportunity to advance NASA’s space communications infrastructure as humans return to the moon and continue to interplanetary exploration, starting with Mars. The space communication infrastructure is a lifeline that supports these endeavors, furthering humankinds’ exploration and understanding of the universe.

Philip A Baldwin↗
NASA NTRSDate not supplied

Implementing Delay/Disruption Tolerant Networking for NASA’s Plankton, Aerosol, Clouds, ocean Ecosystem (PACE) Mission

NASA’s Plankton, Aerosol, Clouds, ocean Ecosystem (PACE) mission will be the first NASA science mission to use Delay/Disruption Tolerant Networking (DTN) for routine operations. The DTN Bundle Protocol (BP) is being integrated into the core Flight Software (cFS) for the transfer of house-keeping files. DTN nodes will also be integrated into the Near Space Network (NSN) ground stations and the PACE Mission Operations Center. This paper will describe the DTN implementations, the PACE DTN operations concept and how this mission is a significant step towards the Solar System Internet.

dtn↗
NASA NTRSDate not supplied

Lessons for Future In-Space Telerobotic Servicing from Robotic Refueling Mission

The Robotic Refueling Mission (RRM) was a multi-phased technology development effort by the National Aeronautics & Space Administration (NASA) and the Canadian Space Agency (CSA). The program leveraged the existing robotic systems and expertise of the International Space Station (ISS) program and the tool design and satellite servicing expertise of NASA’s Exploration & In-space Services (NExIS) Projects Division at Goddard Space Flight Center (GSFC) to evaluate new hardware and techniques for on-orbit telerobotic servicing. Between 2011 and 2021, two external ISS payloads housed over a dozen robotic tools and adapters designed to service a variety of existing and novel satellite interfaces. Robot operators at NASA’s Johnson Space Center (JSC) and CSA used the Special Purpose Dexterous Manipulator (SPDM) to retrieve and operate these tools for tasks such as cutting wires or multi-layer insulation blanketing, removing valve caps, mating electrical connectors, transferring fluids, and performing visual inspections inside a vehicle. Each phase of RRM involved years of preparation. Tool and interface designs were prototyped and evaluated using both NASA and Canadian ground robotic systems. Procedures were developed by GSFC engineers and vetted in partnership with JSC and CSA robot operators. GSFC engineers were trained to provide real-time support during on-orbit operations. These preparatory efforts and the successful on-orbit evaluations yielded an array of lessons for future in-space telerobotic missions. Designing robotic tools for the space environment requires special consideration of materials, indicators, and differences between ground and flight use cases and environments. When there is a limited window for on-orbit operations, devoting time and high-fidelity hardware to ground testing can be critical. Needs during potential troubleshooting are more essential to camera view quality, frame rate, and position requirements more than nominal operations. Detailed hardware manuals, nominal and contingency procedures, along with clearly defined operations team roles and protocols are vital for efficiency. RRM also demonstrated how the ISS can be utilized to increase the technology readiness levels required for future missions and led to additional technology partnerships between NExIS and the ISS program. The lessons from RRM are currently being applied to designs, operations concepts, and ground test methodology for missions such as On-orbit Servicing, Assembly, and Manufacturing1(OSAM-1)and Mars Sample Return.

Zakiya Tomlinson↗
NASA NTRS2022

Vision-Based Precision Approach and Landing for Advanced Air Mobility

Advanced Air Mobility (AAM) aircraft require perception systems for precision approach and landing systems (PALS) in urban, suburban, rural, and regional environments. The current state-of-the-art methods approved for automated approach and landing will be difficult to utilize in support of AAM operational concepts. However, there are technology and systems from other applications and lower-TRL research that use vision, IR, radar, and GPS methods to provide baseline perception and sensing requirements for AAM aircraft approach and landing. This paper focuses on vision-based PAL to demonstrate a closed-loop baseline controller while adhering to the Federal Aviation Administration requirements and regulations. The coplanar algorithm determines pose estimation, which feeds into an Extended Kalman filter. Combining IMU with vision creates a sensor fusion navigation solution for GPS-denied environments. The state estimate leads to glideslope and localizer error computations, which will be pertinent for designing and deriving guidance laws and control laws for AAM PALS. The IMU and vision navigation solution provides promising simulation results for AAM PALS, and higher fidelity simulations will include computer graphics rendering and feature correspondence.

Evan Kawamura↗
NASA NTRS2022

A Systems Model for System-Wide Safety Safety Demonstrator (SD-1): Wildfire Response Operations

The aim of this internship-based project was to contribute to the ongoing development of a systems model for System-Wide Safety’s first Technical Challenge 5 (TC5) series Safety Demonstrator (SD-1), which will be a demonstration of an In-Time Aviation Safety Management System (IASMS) in emerging wildfire response operations. Using Models-Based Systems Engineering (MBSE) principles to develop the model, I organized and traced previously collected stakeholder needs from the Spring 2022 NASA System-Wide Safety Wildland Firefighting Operations Virtual Workshop (https://nari.arc.nasa.gov/sws-wildfire) to system elements, creating connections which can be used in the future by the project engineers to identify and address requirements gaps throughout the system design process. I also identified and modeled preliminary use case scenarios for aerial assets in the demonstrator and, building on previously produced preliminary high-level models of the 8 SD-1 Services, Functions, and Capabilities (SFCs) and their IASMS data flows, worked to model the Real-Time Risk Assessment (RTRA) tool as an implementation of Risk Assessment and Management that can take in multiple sets of data monitored by SFCs. Project deliverables include stakeholder requirements tables and matrices and systems model diagrams produced with MagicDraw software in the SysML Systems Modeling Language, with eventual plans to connect model diagrams to a Department of Defense Operational Viewpoint (OV-1) graphic, a high-level operational concept graphic that will be used to visualize the SD-1 scenarioin a future phase. The system model serves to provide a common understanding of the scope of and activities necessary for the completion of SD-1,and traces how stakeholder needs are to be addressed.

model-based systems engineering↗
NASA NTRS2021

Automated Scheduling of Federated Observations in the NOS Testbed

The advancement of remote and in-situ sensing technology, combined with the emergence of New Space ventures, is producing a variety of new measurements for Earth Science phenomena. New observation techniques must combine and leverage these federated systems. In developing this new paradigm, NASA’s Earth Science Technology Office is developing the New Observing Strategies (NOS) Testbed to validate and demonstrate new operations concepts. As a part of this effort, we have developed a planning and scheduling system to support automated retasking

Chien, Steve↗
NASA NTRS2022

Deep-space Optical Communications Pointing Control Design

This paper provides an overview of pointing control design for NASA’s Deep Space Optical Communications (DSOC) system. DSOC is NASA’s first deep-space laser communications system and includes both a ground system and a space terminal. This paper focus on the pointing control system design and related issues for the Flight Laser Transceiver (FLT), including its key subsystems and components that support the space terminal pointing and control, its operational concept and sequence design, and its control systems design and related analyses. The paper also provides an overview of the achievable system pointing performance that meets the DSOC pointing control design requirements.

Zhu, David↗