Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Electronic structure of HgBa{sub 2}Ca{sub n-1}Cu{sub n}O{sub 2n+2} (n= 1, 2, 3) superconductor parent compounds from periodic hybrid density functional theory

The electronic structure of HgBa{sub 2}Ca{sub n-1}Cu{sub n}O{sub 2n+2} (n= 1, 2, and 3) high T{sub c} superconductor parent compounds has been investigated by means of periodic hybrid density functional theory. Similar to other cuprates, these materials are predicted to exhibit an antiferromagnetic ground state with well localized S= 1/2 magnetic centers at the Cu{sup 2+} sites. However, the presence of the HgO{sub 2} structural units largely defines the nature of states dominating the energy range around Fermi energy. This results in a complex charge transfer character of the insulating gap which decreases when increasing the number of CuO{sub 2} planes in the unit cell, to the point that in the HgBa{sub 2}Ca{sub 2}Cu{sub 3}O{sub 8} compound it becomes so small that one can claim that the resulting material is metallic. Nevertheless, the metallic character arises from the HgO{sub 2} structural units and coexists with the antiferromagnetic order arising from the localized spins at the Cu{sup 2+} sites.

36 MATERIALS SCIENCE↗

Ethanol Sensitivity of Cu{sub 1-x}Sn{sub x}O(x = 0.00, 0.03, and 0.05) Nanoflakes

Cu{sub 1-x}Sn{sub x}O(x = 0.00, 0.03, and 0.05) nanoflakes were synthesized by a simple wet chemical method and X-Ray diffraction (XRD) result confirms the monoclinic structure of CuO with no secondary phases due to Sn doping. The scanning electron microscopic images indicate the formation of nanoflakes. The fundamental Raman modes were observed at 273, 318, 610, and 1084 cm{sup -1} for undoped CuO sample and theses modes were slightly shifted towards lower frequency side for Sn-doped samples, which indicates the inclusion of Sn in CuO. In addition, XRD and Raman studies infer the decrease of crystallinity in doped samples, which is reflected in the sensitivity towards ethanol. The ethanol sensitivity (resistivity measurement) increases with ethanol gas concentration and decreases with Sn-doping in CuO nanoflakes.

36 MATERIALS SCIENCE↗

Influence of Al/CuO reactive multilayer films additives on exploding foil initiator

An investigation on the influence of Al/CuO reactive multilayer films (RMFs) additives on exploding foil initiator was performed in this paper. Cu film and Cu/Al/CuO RMFs were produced by using standard microsystem technology and RF magnetron sputtering technology, respectively. Scanning electron microscopy characterization revealed the distinct layer structure of the as-deposited Al/CuO RMFs. Differential scanning calorimetry was employed to ascertain the amount of heat released in the thermite reaction between Al films and CuO films, which was found to be 2024 J/g. Electrical explosion tests showed that 600 V was the most matching voltage for our set of apparatus. The explosion process of two types of films was observed by high speed camera and revealed that compared with Cu film, an extra distinct combustion phenomenon was detected with large numbers of product particles fiercely ejected to a distance of about six millimeters for Cu/Al/CuO RMFs. By using the atomic emission spectroscopy double line technique, the reaction temperature was determined to be about 6000-7000 K and 8000-9000 K for Cu film and Cu/Al/CuO RMFs, respectively. The piezoelectricity of polyvinylidene fluoride film was employed to measure the average velocity of the slapper accelerated by the explosion of the films. The average velocities of the slappers were calculated to be 381 m/s and 326 m/s for Cu film and Cu/Al/CuO RMFs, respectively, and some probable reasons were discussed with a few suggestions put forward for further work.

36 MATERIALS SCIENCE↗

Evolution of temperature dependent properties of oriented YBaCo{sub 4}O{sub 7} thin films

Bulk YBaCo{sub 4}O{sub 7} was synthesized using a ceramic route in air. Thin films of this compound were grown on (100) oriented LaAlO{sub 3} substrate using a Pulsed Laser Deposition technique. X-ray diffraction results of thin film indicate that the film has (110) orientation. Electrical resistivity measurements, in 300K to 100K temperature range showed that the film is insulating, similar to that of the bulk. Spectroscopic ellipsometric measurements on thin films in the energy range 1.5 to 5 eV and at temperatures from 300 K to 400 K showed that the direct band gap s 2.45 eV at ambient temperature while its value increases with increase in temperature. The increase in band gap with temperature is attributed to the Moss-Burstein effect.

36 MATERIALS SCIENCE↗

The wavelength dependent photovoltaic effects caused by two different mechanisms in carbon nanotube film/CuO nanowire array heterodimensional contacts

Hetrodimensional contacts were fabricated by coating double-walled carbon nanotube (CNT) films on CuO nanowire arrays. Wavelength dependent photovoltaic effects by irradiating the devices with 405, 532, and 1064 nm lasers were observed. Two possible mechanisms responsible for the observed results were discussed. Photoexcitations within CuO nanowires and Schottky barriers in the heterojunctions dominate the photovoltaics in the 405 and 532 nm cases. For the 1064 nm case, the photovoltaic is the result of the excitation within the CNTs and of the heterodimensionality effect. Control experiments on CNT film/CuO granular film hetrodimensional contacts further show the relationship between these two mechanisms.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Phase constitution and interface structure of nano-sized Ag-Cu/AlN multilayers: Experiment and ab initio modeling

Nano-sized Ag-Cu{sub 8nm}/AlN{sub 10nm} multilayers were deposited by reactive DC sputtering on {alpha}-Al{sub 2}O{sub 3}(0001) substrates. Investigation of the phase constitution and interface structure of the multilayers evidences a phase separation of the alloy sublayers into nanosized grains of Ag and Cu. The interfaces between the Ag grains and the quasi-single-crystalline AlN sublayers are semi-coherent, whereas the corresponding Cu/AlN interfaces are incoherent. The orientation relationship between Ag and AlN is constant throughout the entire multilayer stack. These observations are consistent with atomistic models of the interfaces as obtained by ab initio calculations.

36 MATERIALS SCIENCE↗

Metal etching with reactive gas cluster ion beams using pickup cell

Mixed gas cluster ion beams were formed using pickup cell for metal etching. O{sub 2} neutral clusters pick up acetic acid and formed mixed cluster beam. By using O{sub 2}-GCIB with acetic acid, enhancement of Cu etching was observed. Because of dense energy deposition by GCIB, etching of Cu proceeds by CuO formation, enhancement of chemical reaction with acetic acid and desorption of etching products. Surface roughening was not observed on poly crystalline Cu because of the small dependence of etching rate on crystal orientation. Halogen free and low-temperature metal etching with GCIB using pickup cell is possible.

36 MATERIALS SCIENCE↗

Multi-component symmetry-projected approach for molecular ground state correlations

The symmetry-projected Hartree–Fock ansatz for the electronic structure problem can efficiently account for static correlation in molecules, yet it is often unable to describe dynamic correlation in a balanced manner. Here, we consider a multi-component, systematically improvable approach, that accounts for all ground state correlations. Our approach is based on linear combinations of symmetry-projected configurations built out of a set of non-orthogonal, variationally optimized determinants. The resulting wavefunction preserves the symmetries of the original Hamiltonian even though it is written as a superposition of deformed (broken-symmetry) determinants. We show how short expansions of this kind can provide a very accurate description of the electronic structure of simple chemical systems such as the nitrogen and the water molecules, along the entire dissociation profile. In addition, we apply this multi-component symmetry-projected approach to provide an accurate interconversion profile among the peroxo and bis(μ-oxo) forms of [Cu{sub 2}O{sub 2}]{sup 2+}, comparable to other state-of-the-art quantum chemical methods.

74 ATOMIC AND MOLECULAR PHYSICS↗

Design of cascaded low cost solar cell with CuO substrate

For many years the main focus of R and D in solar cells was the development of high-efficiency solar convertors. However with solar technology beginning to be a part of national grids and stand-alone power supplies for variety of individual customers, the emphasis has changed, namely, the cost per kilowatt- hour (kW-hr) started to be an important figure of merit. Although Si does dominate the market of solar convertors, this material has total cost of kilowatt-hour much higher than what the power grid is providing presently to customers. It is well known that the cost of raw semiconductor material is a major factor in formulation of the final cost of a solar cell. That motivated us to search and design a novel solar cell using cheap materials. The new p-i-n solar cell consists of hetero-structure cascade of materials with step by step decreasing energy gap. Since the lattice constant of these three materials do differ not more than 2%, the more expensive epitaxial fabrication methods can be used as well. It should be emphasized that designed solar cell is not a cascade of three solar cells connected in series. Our market study shows that Si solar panel which costs $250–400 / m{sup 2} leads to a cost of $0.12–0.30 / kW-hr. To the contrary, CuO based solar cells with Cadmium compounds on top, would cost $100 / m{sup 2}. This will allow the novel solar cell to produce electricity at a cost of $0.06–0.08 / kW-hr.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Hf substitutions on the formation and superconductivity of Tl-1212 type phase TlSr{sub 2}(Ca{sub 1−x}Hf{sub x})Cu{sub 2}O{sub 7−δ}

The TlSr{sub 2}(Ca{sub 1−x}Hf{sub x})Cu{sub 2}O{sub 7−δ} (Tl-1212) superconductor for x = 0.0 to 0.4 has been prepared by the solid state reaction method and studied by powder X-ray diffraction method, electrical resistance and scanning electron microscope (SEM). Most of the samples showed the Tl-1212 as the major phase and Tl-1201 as the minor phases. Small amounts of Hf-substitution (x ≤ 0.15 or x ≤ 0.25) maintained the formation of the Tl-1212 phase but larger amounts led to the formation of 1201 and an unknown impurity phase. The resistance versus temperature curve showed metallic behavior for all samples. The resistance versus temperature curves showed onset transition temperature (T{sub c} {sub onset}) between 38 and 47 K for Hf substitution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of undoped and Mg doped CuCrO{sub 2} powders synthesized by sol-gel route

In this work, CuCrO{sub 2} was synthesized by sol-gel method using citric acid as a gelling agent. The different parameters like ratio of citric acid to metal ions, calcination temperature, and duration were studied. A green colored powder with particle size around 300 nm was formed at the calcination temperature of 800 °C for four hours duration. The increase in temperature has a profound impact on crystallite size and in turn effected the optical properties. Band gap of the obtained CuCrO{sub 2} has varied from 2.3 to 1.7 eV by increasing the temperature from 800 °C to 900 °C. Doping studies were performed by introducing Mg{sup 2+} ion to substitute Cr{sup 3+} in CuCrO{sub 2}. X-ray powder diffraction and SEM studies on 2% Mg doped samples indicated a clear formation of side phases. According to the X-ray powder patterns, the reflections from side phases were increasing with the increase in doping concentrations of Mg from 2 to 5%. The side phases were found to be MgCr{sub 2}O{sub 4} spinel and CuO. The band gap has decreased for doped samples in comparison to undoped one. In this paper, sol-gel synthesis and characterization by Xray powder diffraction, SEM studies and UV-Vis-Diffuse Reflectance spectra are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrodeposition of hierarchical ZnO/Cu{sub 2}O nanorod films for highly efficient visible-light-driven photocatalytic applications

The development of high-performance visible-light-responsive photocatalytic materials has attracted widespread interest due to their potential applications in the environmental and energy industries. In this work, hierarchical ZnO nanorods films were successfully prepared on the stainless steel mesh substrates via a simple two-step seed-assisted electrodeposition route. Cu{sub 2}O nanoparticles were then electrodeposited on the surface of ZnO nanorods to form the core-shell heterostructure. The synthesized ZnO/Cu{sub 2}O nanocomposites were characterized by X-ray diffraction, field-emission scanning electron microscopy, and UV-visible spectrophotometer. Due to the branched hierarchical morphologies and core-shell structure, ZnO/Cu{sub 2}O nanomaterials show a prominent visible-light-driven photocatalytic performance under the low-intensity light irradiation (40 mW/cm{sup 2}). The influence of some experimental parameters, such as Cu{sub 2}O loading amount, ZnO morphologies, the substrate type, and the PH of the Cu{sub 2}O precursor solution on ZnO/Cu{sub 2}O photocatalytic performance was evaluated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric and phonon properties of the multiferroic ferrimagnet Cu{sub 2}OSeO{sub 3}

We propose a microscopic model in order to study the multiferroic properties of Cu{sub 2}OSeO{sub 3} taking into account the ferrimagnetic interaction, frustration, linear magnetoelectric (ME) coupling, and anharmonic spin-phonon interaction. We have shown that the dielectric constant and the phonon energy and damping have a kink near the magnetic phase transition T{sub C} = 58 K which disappears with increasing of an external magnetic field. This behavior is an evidence for a strong ME coupling and in qualitative agreement with the experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and dielectric properties of one-dimensional array of S = 1/2 linear trimer system Na{sub 2}Cu{sub 3}Ge{sub 4}O{sub 12}

Magnetic susceptibility χ, specific heat C, capacitance C{sub p}, and {sup 23}Na-NMR measurements have been carried out on polycrystalline samples of quantum spin linear trimer system Na{sub 2}Cu{sub 3}Ge{sub 4}O{sub 12}, which has the one-dimensional array of Cu{sub 3}O{sub 8} trimers formed of edge-sharing three CuO{sub 4} square planes. The exchange interactions between the Cu{sup 2+} (S = 1/2) spins have been determined by analyzing χ-T and C-T curves. By employing the isolated S = 1/2 Heisenberg trimer model above 70 K, the nearest-neighbor exchange couplings J{sub 1} and the second-neighbor one J{sub 2} in trimer have been evaluated to J{sub 1}/k{sub B} = 30 ± 20 K (antiferromagnetic) and J{sub 2}/k{sub B} = 340 ± 20 K. At low temperature region, two spins of the edge in the Cu{sub 3}O{sub 8} trimers form a nonmagnetic singlet by strong antiferromagnetic interaction J{sub 2}, and the spin left in the center of the Cu{sub 3}O{sub 8} trimer forms one-dimensional chains by the exchange interaction J{sub 3} between the trimers. By employing the S = 1/2 uniform Heisenberg chain model below 70 K, we have evaluated to J{sub 3}/k{sub B} = 18 ± 1 K. The mechanism of multiferroic behavior at T{sub c} = 2 K is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly oriented polycrystalline Cu{sub 2}O film formation using RF magnetron sputtering deposition for solar cells

Room temperature sputtering deposition and re-crystallization of the deposited thin films by rapid thermal annealing have been evaluating in detail as a formation method of Cu{sub 2}O active layer for solar cells, which minimize thermal budget in fabrication processes. Single phase polycrystalline Cu{sub 2}O films were obtained by a magnetron rf sputtering deposition and its crystallinity and electrical characteristics were controlled by the annealing. Hall mobility was improved up to 17 cm{sup 2}V{sup −1}s{sup −1} by the annealing at 600°C for 30s. Since this value was smaller than 47 cm{sup 2}V{sup −1}s{sup −1} of the film deposited under thermal equilibrium state using pulsed laser deposition at 600°C, some contrivances were necessary to compensate the deficiency. It was understood that the sputter-deposited Cu{sub 2}O films on (111)-oriented Pt films were strongly oriented to (111) face also by the self-assembly and the crystallinity was improved by the annealing preserving its orientation. The sputter-deposited film quality was expected to become equivalent to the pulsed laser deposition film from the results of X-ray diffractometry and photoluminescence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonons, nature of bonding, and their relation to anomalous thermal expansion behavior of M{sub 2}O (M = Au, Ag, Cu)

We report a comparative study of the dynamics of Cu{sub 2}O, Ag{sub 2}O, and Au{sub 2}O (i.e., M{sub 2}O with M = Au, Ag, and Cu) using first principle calculations based on the density functional theory. Here, for the first time, we show that the nature of chemical bonding and open space in the unit cell are directly related to the magnitude of thermal expansion coefficient. A good match between the calculated phonon density of states and that derived from inelastic neutron scattering measurements is obtained for Cu{sub 2}O and Ag{sub 2}O. The calculated thermal expansions of Ag{sub 2}O and Cu{sub 2}O are negative, in agreement with available experimental data, while it is found to be positive for Au{sub 2}O. We identify the low energy phonon modes responsible for this anomalous thermal expansion. We further calculate the charge density in the three compounds and find that the magnitude of the ionic character of the Ag{sub 2}O, Cu{sub 2}O, and Au{sub 2}O crystals is in decreasing order, with an Au-O bond of covalent nature strongly rigidifying the Au{sub 4}O tetrahedral units. The nature of the chemical bonding is also found to be an important ingredient to understand the large shift of the phonon frequencies of these solids with pressure and temperature. In particular, the quartic component of the anharmonic term in the crystal potential is able to account for the temperature dependence of the phonon modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adaptive multiconfigurational wave functions

A method is suggested to build simple multiconfigurational wave functions specified uniquely by an energy cutoff Λ. These are constructed from a model space containing determinants with energy relative to that of the most stable determinant no greater than Λ. The resulting Λ-CI wave function is adaptive, being able to represent both single-reference and multireference electronic states. We also consider a more compact wave function parameterization (Λ+SD-CI), which is based on a small Λ-CI reference and adds a selection of all the singly and doubly excited determinants generated from it. We report two heuristic algorithms to build Λ-CI wave functions. The first is based on an approximate prescreening of the full configuration interaction space, while the second performs a breadth-first search coupled with pruning. The Λ-CI and Λ+SD-CI approaches are used to compute the dissociation curve of N{sub 2} and the potential energy curves for the first three singlet states of C{sub 2}. Special attention is paid to the issue of energy discontinuities caused by changes in the size of the Λ-CI wave function along the potential energy curve. This problem is shown to be solvable by smoothing the matrix elements of the Hamiltonian. Our last example, involving the Cu{sub 2}O{sub 2}{sup 2+} core, illustrates an alternative use of the Λ-CI method: as a tool to both estimate the multireference character of a wave function and to create a compact model space to be used in subsequent high-level multireference coupled cluster computations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optical and phonon properties of ZnO:CuO mixed nanocomposite

Optical and phonon properties of ZnO:CuO nanocrystals which are prepared through sol-gel method are reported here. From X-ray diffraction studies, observed that Cu doping replaces the Zn and also forms secondary phase. Optical absorption spectral studies shows that the exciton and plasmon related bands of ZnO and CuO phase, respectively. Fluorescence studies of the prepared samples shows that green emission from ZnO is completely depleted and the same is attributed to CuO Plasmon. Raman spectral studies reveal that secondary phase (impurity) induced profile changes in 1LO and E{sub 2High} modes. Asymmetry in peak shape is analyzed using Fano profile with the combination of Lorentzian profile. Moreover, the monotonic increase of Fano factor and full width at half maxima is hopefully attributed to the continuum arises by the plasmons of Cu-O phase in ZnO nanosystem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗