Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONCENTRATION RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Future CH4 Budgets as Modelled By A Fully Coupled Earth System Model Using Prescribed GHG Concentrations vs. Interactive CH4 Sources and Sinks

We have used the NASA Goddard Institute for Space Studies (GISS) Earth system model GISS-E2.1 to study the future budgets and trends of global and regional CH4 under different emission scenarios. GISS-E2.1 is one of the few ESMs that can be driven by anthropogenic CH4 emissions, as well as interactive natural sources such as wetlands, and can simulate the tropospheric CH4 chemistry. In frame of the recent short-lived climate forcers (SLCFs) assessment by the Arctic Monitoring and Assessment Programme (AMAP), we used the GISS-E2.1 model with prescribed long-lived greenhouse gas (GHG) concentrations. In the present study, we have supplemented these simulations using the interactive CH4 sources and sinks in order to quantify the model performance and the sensitivity to CH4 sources and sinks. We have used the Current Legislation (CLE) and the Maximum Feasible Reduction (MFR) emission scenarios from the Eclipse V6b emission database to simulate the future chemical composition and climate impacts from 2015 to 2050. We have also simulated 1995-2014 in order to evaluate the model performance following the AMAP-SLCF protocol. The prescribed GHG version underestimates the Global Atmospheric Watch (GAW) surface CH4 observations during the period between 1995 and 2023 by 1% [-8.4%-2.0%], with a correlation (r) of 0.71 [-0.41 0.99]. The largest underestimations are over the continental emission regions such as North America, Europe, and Asia, while biases are smallest over oceans. On the other hand, the simulation with interactive sources and sinks underestimates the GAW observations more than the prescribed simulation, by 18.5% [-25% -10.4%], with a lower r of 0.36 [-0.82 0.93]. Opposite to the prescribed simulation, the biases are largest over oceans and smaller over the continents, however they are still larger over land than the prescribed simulation. The interactive simulation, with large sources virtually over land and strong sink over oceans, has a land/ocean ratio larger than 1 while the prescribed simulation has this ratio equal to 1 as it distributes the global prescribed CH4 concentration equally in longitude over a given latitude. This clearly shows that the interactive sources and sinks should be represented in models in order to realistically simulate the chemical composition and the oxidative capacity of the atmosphere. As expected, the MFR scenario simulates lower global surface CH4 concentrations and burdens compared to the CLE scenario, however in both cases, global surface CH4 and burden continue to increase through 2050 compared to present day. In the CLE scenario, increases are largest over the equatorial belt, in particular over India and East China, while the MFR scenario shows increases over the whole Southern Hemisphere, however much smaller compared to CLE. Finally, the interactive simulation shows that the chemical CH4 sink increases in the CLE scenario, while it slightly decreases in the MFR, leading to a larger CH4 lifetime in the MFR scenario compared to in the CLE scenario.

CH4↗
DOE OSTI2023

Solution combustion synthesis of iron-based alumina catalysts for dehydrogenation of fossil fuels

Microwave-assisted thermocatalytic dehydrogenation of fossil fuels has been proposed as a method for hydrogen production with no CO2 emissions. The byproduct is carbon, which has a commercial value. Iron-based alumina nanocomposites are promising catalysts for this process as they both absorb microwave radiation and catalyze the dehydrogenation. In addition, they may have magnetic properties, which could be used for their separation from the carbon byproduct. Solution combustion synthesis (SCS) is an attractive technique for the fabrication of iron-based alumina nanocomposites because it can produce high specific surface area oxides in a facile manner. However, the effects of the heating mode, the fuel, and the iron/aluminum ratio on the combustion synthesis behavior and the product properties have not been studied yet. In the present work, the iron-based alumina nanocomposites were obtained by SCS using a hotplate, a muffle furnace, and a microwave oven. The initial mixtures were aqueous solutions of iron nitrate, aluminum nitrate, and an organic fuel. The concentrations of the two nitrates were varied in proportion to Fe:Al molar ratios of 1:2, 1:1, and 2:1. Two fuels were tested: citric acid and glycine. The combustion was less vigorous when citric acid was used as the fuel, which is explained by the lower exothermicity of the reaction. X-ray diffraction analysis of the products confirmed the formation of complex oxides of Fe and Al, specifically it detected hercynite and magnetite phases. Brunauer-Emmett-Teller surface area analysis has shown that the powders obtained using citric acid have specific surface areas as high as 276 m2/g, significantly higher than those obtained using glycine. Muffle furnace and hotplate heating led to comparable specific surface areas, while microwave heating resulted in significantly lower specific surface areas. The magnetic properties of the products increase with increasing the Fe/Al molar ratio from 1:2 (no response to a magnetic field) to 1:1 (weak response) and 2:1 (strong response).

solution combustion synthesis, nanoscale oxides, f↗
NASA NTRS2001

Establishing the Dependence of [HO2]/[OH] on Temperature, Halogen Loading, O3, and NO(x) Based on in Situ Measurements from the NASA ER-2

In situ observations of OH and HO2 from the Airborne Southern Hemisphere Ozone Experiment/Measurements for Assessing the Effects of Stratospheric Aircraft (ASHOE/MAESA), Stratospheric TRacers of Atmospheric Transport (STRAT), and Polar Ozone Loss in the Arctic Region in Summer (POLARIS) NASA ER-2 field campaigns are used to examine the partitioning of HO(x) in the lower stratosphere (tropopause to approx.21 km) and upper troposphere (approx.10 km to tropopause). These measurements span a latitude range from 70degS to 90degN and a variety of atmospheric conditions as a result of seasonal changes and altitude. The response of the observed [HO2]/[OH] to changes in temperature, [03], [CO], [NO], [CIO], and [BrO] is investigated. The measured ratio is accurately described (approx.+/-10%) by a steady-state model constrained by the measured mixing ratios of O3, CO, NO, CIO, and BrO, where the model is valid for conditions of HO(x) cycling much faster than HO(x) production and loss. The concentration of HO2 depends on [OH], which, to first order, has been observed to be a simple function of the solar zenith angle in the lower stratosphere. The partitioning between OH and HO2 is controlled by the local chemistry between the HO, radicals and O3, CO, NO, CIO, and BrO. The response of [HO(x)] to changes in [NO(x)] and [O3] is demonstrated. Further observations are necessary to illustrate the response of HO(x) to changes in halogen concentrations. A quantitative understanding of [HO2]/[OH] is important, since many of the reactions that control this ratio are directly involved in catalytic removal of O3 in the lower stratosphere and production of O3 in the upper troposphere.

Lanzendorf, E. J.↗
NASA NTRSDate not supplied

Influences of Solar Irradiation and Aerosol Surface Area on Nitrous Acid Production in Western U.S. Wildfire Smoke

Biomass burning has been identified as a primary emission source for a host of gas and aerosol phase compounds which can damage environmental and human health. During FIREX-AQ collaborators from UNH, NASA Langley Aerosol Research Group Experiment (LARGE), and Brown University conducted measurements out of NASA Langley’s mobile laboratory during July and August of 2019. Nitrous acid (HONO) and nitric acid (HNO3) concentrations were measured at nominal 5-minute resolution using a dual mist chamber-ion chromatograph system resulting in approximately 1,200 total samples from five separate fires in the western US. Enhancement ratios between PM2.5 and carbon monoxide were used to discriminate between young and aged smoke plumes. Average HONO concentrations were significantly higher (P << 0.01) in young daytime compared to nighttime smoke while no statistical differences (P > 0.05) were observed between young and aged smoke during day or night. In daytime smoke from the Williams Flats fire (75 km SE of Spokane, WA on the Columbia River) UV-A irradiation was highly correlated with HONO to nitrogen dioxide (NO2) ratios; indicating that heterogenous NO2 to HONO conversion more than compensated for rapid photolytic loss of HONO. Black carbon (BC) may serve as a stable proxy for total available aerosol surface area in biomass burning plumes when total aerosol size distributions are unavailable. During the day HONO/NO2 is weakly correlated to BC when BC abundance exceeds 1 ug/m3 but at lower BC concentrations the relationship breaks down. At night this relationship was stronger, partly due to consistently high BC concentrations. These observations suggest that heterogenous conversion of NO2 to HONO on aerosol is a significant source of HONO in dense smoke plumes. In more diffuse smoke conversion on other surfaces (soil, foliage) becomes more important.

J. H. Kaspari↗
NASA NTRS1980

Hydrothermal alteration of impact melt sheets with implications for Mars

A model of the interaction of water with an impact melt sheet is constructed to explain the presence of hydrothermal alteration, fluid flow channels, and the redistribution of volatile elements in terrestrial melt sheets. A calculation of the amount of water vaporized beneath a melt sheet with a large fraction of melt results in a maximum total steam/melt sheet ratio of 23% by weight. The model also applies to Martian impact melt sheets, which have a total volume greater than a global layer 60 m thick. Hydrothermal circulation of steam in Martian melt sheets may have produced iron-rich alteration clays, ferric hydroxides, and near-surface accumulations of salts. The ability of vapor-dominated hydrothermal systems to concentrate sulfate relative to chloride is consistent with the high sulfate to chloride ratio found in the Martian soil by the Viking landers. A major fraction of the Martian soil may consist of the erosion products of hydrothermally altered impact melt sheets.

Newsom, H. E.↗
NASA NTRS1982

Aspects of the history of 66095 based on trace elements in clasts and whole rock

Halogens, P, U and Na are reported in anorthositic and basaltic clasts and matrix from rusty rock 66095. Large fractions of Cl and Br associated with the separated phases from 66095 are soluble in H2O. Up to two orders of magnitude variation in concentrations of these elements in the breccia components and varying H2O-soluble Cl/Br ratios indicate different sources of volatiles. An approximately constant ratio of the H2O- to 0.1 M HNO3-soluble Br in the various components suggests no appreciable alteration in the original distributions of this element in the breccia forming processes. Up to 50% or more of the phosphorus and of the non-H2O-soluble Cl was dissolved from most of the breccia components by 0.1 M HNO3. Clast and matrix residues from the leaching steps contain, in most cases, the Cl/P2O5 ratio found in 66095 whole rock and in a number of other Apollo 16 samples. Evidence that phosphates are the major P-phases in the breccia is based on the 0.1 M acid solubility of Cl and P in the matrix sample and on elemental concentrations which are consistent with those of KREEP.

Jovanovic, S.↗
DOE OSTI2022

Literature Review on Next Generation Solvent Isopar ® L Vapor Pressure Curve and the Partitioning of its Modifier and Extractant

The Next Generation Solvent (NGS) is set to replace the Original Caustic Side Solvent Extractant (CSSX) at the Salt Waste Processing Facility (SWPF). The Savannah River National Laboratory (SRNL) was requested by Savannah River Mission Completion (SRMC), formerly Savannah River Remediation (SRR), to perform a literature review on the following topics to address flammability concerns with the current solvent: Isopar ® L vapor pressure curve for NGS, partitioning ratio for the extractant MaxCalix and the modifier Cs-7SB, and high cesium concentration impacts on NGS radiolysis and potential solvent degradation rates in high cesium concentrations. The following conclusions and recommendations are made based on previous experimental work and literature: (1) Current SWPF flammable gas generation calculations use an Isopar ® L vapor pressure curve based on experimental testing with the Original CSSX solvent. No such testing to date has been performed with NGS. It is suggested that the decrease in Cs-7SB concentration for NGS compared to the Original CSSX solvent would lead to a slightly higher vapor pressure at all temperatures in SWPF vessels. A bounding NGS vapor pressure curve has been provided; it is recommended to see if these values would challenge current flammability controls and to perform testing if needed.(2) The partitioning ratio for Cs-7SB is known in the Original CSSX solvent with dilute nitric acid and caustic solutions. No tests could be found for the partitioning of Cs-7SB to dilute boric acid solutions; however, a similar partitioning ratio is expected. Due to the lipophilic alkyl chains on MaxCalix, it is expected to be even less soluble than BOBCalixC6 in the aqueous phase and should not be considered a significant contributor to the f organic term. Additionally, the reaction rate of N,N’,N’’-Tris(3,7-dimethyloctyl)guanidine (TiDG) or its degradation products with a hydrogen radical should be estimated/determined if they are found to be significant contributors to the f organic term. (3) NGS is expected to see much higher Cs concentrations at SWPF in comparison to its use at the Modular CSSX Unit (MCU). These higher Cs concentrations could influence radiolytic degradation rates of the solvent. NGS appears to be fairly stable to radiolytic degradation based on previous testing and its use at MCU. However, there has not been radiolytic flammable gas generation testing with NGS to date. There is a risk that the continued use of G-values obtained for flammable gases produced from the irradiation of the Original CSSX solvent is not bounding for NGS, but this is considered a very low risk due to the similarities in the composition of the solvents, as well as the conservatisms in the experimental design of the Original CSSX testing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1994

Relationship of ozone and carbon monoxide over North America

Observations at sites in eastern North America show a strong correlation between O3 and CO concentrations in summer, with a consistent slope DeltaO3/DeltaCO approximately = 0.3. Observations in the aged Denver plume at Niwot Ridge, Colorado, also show a strong correlation but with DeltaO3/DeltaCO = 0.15. These data offer a sensitive test for evaluating the ability of photochemical models to simulate production of O3 over North America and its export to the global atmosphere. Application to the Harvard/Goddard Institute for Space Studies three-dimensional, continental-scale model shows that the model gives a good simulation of the observed O3-CO correlations and of the associated DeltaO3/DeltaCO. This successful simulation lends support to model estimates of 6 Gmol/d for the net O3 production in the U.S. boundary layer in summer (corresponding to a net O3 production efficiency of 5.5, which is the number of O3 molecules produced per molecule of NOx consumed) and 70% for the fraction of the net production that is exported to the global atmosphere. Export of U.S. pollution appears to make a significant contribution to total tropospheric O3 over the northern hemisphere in summer. Simple interpretation of observed DeltaO3/DeltaCO as an O3/CO anthropogenic enhancement ratio is shown to underestimate substantially anthropogenic O3 production, because O3 and CO concentrations are negatively correlated in the absence of photochemistry. It is also shown that concurrent observations of DeltaO3/DeltaCO and DeltaO3/Delta(NO(y)-NO(x)) ratios can be used to impose lower and upper limits on the net O3 production efficiency.

Chin, Mian↗
NASA NTRS2015

Pharmacokinetic Modeling of Intranasal Scopolamine in Plasma Saliva and Urine

An intranasal gel dosage formulation of scopolamine (INSCOP) was developed for the treatment of Space Motion Sickness (SMS). The bioavailability and pharmacokinetics (PK) were evaluated under IND (Investigational New Drug) guidelines. The aim of the project was to develop a PK model that can predict the relationships among plasma, saliva and urinary scopolamine concentrations using data collected from the IND clinical trial protocol with INSCOP. Twelve healthy human subjects were administered at three dose levels (0.1, 0.2 and 0.4 mg) of INSCOP. Serial blood, saliva and urine samples were collected between 5 min to 24 h after dosing and scopolamine concentrations were measured by using a validated LC‐MS‐MS assay. PK compartmental models, using actual dosing and sampling time, were established using Phoenix (version 1.2). Model selection was based on a likelihood ratio test on the difference of criteria (‐2LL (i.e. log-likelihood ratio test)) and comparison of the quality of fit plots. The results: Predictable correlations among scopolamine concentrations in compartments of plasma, saliva and urine were established, and for the first time the model satisfactorily predicted the population and individual PK of INSCOP in plasma, saliva and urine. The model can be utilized to predict the INSCOP plasma concentration by saliva and urine data, and it will be useful for monitoring the PK of scopolamine in space and other remote environments using non‐invasive sampling of saliva and/or urine.

Wu, L.↗
DOE OSTI2023

High yield, large-scale synthesis of calcium-based microporous metal-organic framework and examination of the long-term stability for xenon adsorption applications

Here, scale-up synthesis of calcium-based microporous metal-organic framework (SBMOF-1) up to ~400 g in a batch with a yield of >90 % was achieved by a solvothermal reaction of sulfonyldibenzoic acid (SDB) with an excess of calcium chloride. Here, we observed that recrystallization of unreacted SDB at a solvothermal condition caused a moderate reaction yield (40–50 %) at the reference condition of $C_{CaCl_2}$/$C_{SDB}$=1 and $C_{SDB}$/$C_{SDB(ref)}$=1. Simply adding more reagents to the reactor did not increase the mass of product formed per unit volume due to a more pronounced loss of the yield at those conditions. By simultaneously changing the molar ratio of CaCl 2 to SDB, $C_{CaCl_2}$/$C_{SDB}$, and the molar concentration of the SDB reagent, $C_{SDB}$/$C_{SDB(ref)}$, we explored %yield of the reaction. Interestingly, a linear improvement in the yield was observed from 21% (at $C_{CaCl_2}$/$C_{SDB}$=0.5) up to 78% (at $C_{CaCl_2}$/$C_{SDB}$=6) at a fixed ratio of $C_{SDB}$/$C_{SDB(ref)}$=2 and the yield leveled off after further addition. Unlike those at $C_{CaCl_2}$/$C_{SDB}$=1, the yields at a high CaCl 2 excess continued to improve with increasing the $C_{SDB}$/$C_{SDB(ref)}$. When a large pressure vessel (2500 mL EtOH, $C_{CaCl_2}$/$C_{SDB}$=6, $C_{SDB}$/$C_{SDB(ref)}$=8) was used, about 415 g of SBMOF-1 with a yield of 92.3% was produced, indicating 16 × the space yield improvement. The ability to synthesize SBMOF-1 on a large scale allowed us to examine the long-term stability of SBMOF-1 for almost 200 days in the presence of varying levels of relative humidity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ferroelectricity in boron-substituted aluminum nitride thin films

This manuscript demonstrates ferroelectricity in B-substituted AlN thin films and a complementary set of first-principles calculations to understand their structure-property relationships. Al 1–x B x N films are grown by dual-cathode reactive magnetron sputtering on (110)W/(001)Al 2 O 3 substrates at 300°C at compositions spanning x = 0 to x = 0.20. X-ray diffraction studies indicate a decrease in both the c and a lattice parameters with increasing B concentration, resulting in a decrease in unit cell volume and a constant c/a axial ratio of 1.60 over this composition range. Films with 0.02 ≤ x ≤ 0.15 display ferroelectric switching with remanent polarizations exceeding 125 μCcm –2 while maintaining band gap energies of > 5.2eV. The large band gap allows low frequency hysteresis measurement (200 Hz) with modest leakage contributions. At B concentrations of x > 0.15, c-axis orientation deteriorates and ferroelectric behavior is degraded. Furthermore, density-functional theory calculations corroborate the structural observations and provide predictions for the wurtzite u parameter, polarization reversal magnitudes, and composition-dependent coercive fields.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Signature Analysis Utilizing a Dynamic Molten Salt Reactor Model for MC&A

Moving from traditional fixed fuel nuclear reactor systems to a mobile, dynamic fuel system that has dissolved special nuclear material in a molten salt is a paradigm shift in several respects. One major consideration is how to develop effective nuclear material controls and accounting for these novel reactor systems. The Molten Salt Reactor Experiment is one example of a critical molten salt system and provided a significant reference library based on the documented effort. But it was low thermal power that was not intended to reflect a commercial scale electricity production design. Therefore, to facilitate and assist vendors with domestic licensing considerations, research is underway to identify methods that could be used for domestic safeguards approaches for these novel reactor systems. This research presents the results of a signature analysis of data generated from three simulated scenarios using the molten salt demonstration reactor model defined in the Transient Simulation Framework of Reconfigurable Modules. Each scenario provides 1 hour isotope inventories over a 180 day period. The scenarios investigated provide test cases to examine if direct gamma-ray spectroscopy of the fuel can be used to identify changes comparing a base case (no reactivity control and fixed fission contribution) to an insertion of reactivity (10 pcm no change in fission composition) and a change in fission composition. The analysis demonstrates that monitoring the total count rate in a highly collimated high-resolution photon energy spectrum is sensitive to perturbations imposed into the reactor model. The total photon count rate changes ≈2% for the fission composition change and ≈4.5% for the reactivity insertion compared to the base case. However, both scenarios show an increase in the total photon count rate. The total photon count rate can be used to identify changes due to power (number of fissions) but not due to a change in the material undergoing fission. To distinguish between the two cases of increased power, the photon spectrum would require an intensive analysis technique. A photon peak count rate ratio analysis could be used to identify changes in the fissile material fission generation in the core through identification of a static peak that shows little variation to the source of fission and a highly varying peak. The photon peak strength will ultimately be determined by the isotope’s fission yield. A preliminary analysis investigating the coupling of the isotope’s fission yield and its concentration in the fuel salt derived from the modeling has been performed. A ratio analysis of the photon peak count rates of 140 La to 99 Mo demonstrated that the reactivity insertion creates a distinct difference in the ratio compared to the fission composition change scenario.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Examination of the Radiolytic Stability of the GENIORS Solvent

The INL radiolysis test loop system has been employed to evaluate the effects of gamma radiolysis the stability and performance of the GENIORS solvent extraction process. This report describes details and results of the experiments performed and documents completion of milestone M3FT-21IN030101024 “Testing of Radiolytic Stability of m-TDDGA Based Solvent at INL”. The purpose of the proposed dynamic irradiation tests to be performed is to evaluate the radiolytic stability of the GENIORS process solvent for An/Ln recovery under process-like conditions. Recent research efforts within the European Union GENIORS project have focused upon demonstrating additional process improvements. These improvements include simplification of the solvent composition, use of reagents composed of only C, H, O, and N atoms (the CHON principle), identification of a diglycolamide derivative with more favorable Pu loading behavior, and use of an aqueous soluble stripping reagent that is not sulfonated. As a result, a new solvent utilizing dimethyl-N,N,N’,N’-tetradecyl-diglycolamide (cis-mTDDGA) as the An/Ln extractant and the aqueous soluble 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4yl]-pyridine (PTD) as the An/Ln stripping reagent was proposed. The impact of gamma radiolysis upon the efficacy of the GENIORS process solvent was evaluated by determining the americium, europium, and cerium distribution ratios as a function of absorbed dose. The measured distribution ratios demonstrated that the GENIORS solvent did undergo radiolytic degradation. However, at absorbed doses corresponding to realistic process conditions, the extraction and stripping performance of the solvent remains acceptable. Compositional analysis of the irradiated solvent revealed a decrease in the concentration of cis-mTDDGA, which is consistent with the observed changes in metal distribution ratios as a function of absorbed dose.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
NASA NTRS1980

Chemical classification of iron meteorites. IX - A new group /IIF/, revision of IAB and IIICD, and data on 57 additional irons

The paper discusses the chemical classification of independent iron meteorites which include 57 meteorites based on structural observations and concentrations of Ni, Ga, Ge, and Ir. Instrumental neutron activation analysis indicates that five previously studied irons with very high Ge/Ga ratios are compositionally closely related and can be gathered together as group IIF; a previously unstudied iron, Dehesa, has the highest Ge/Ga ratios known in an iron meteorite, a ratio 18 times higher than that in CI chondrites. In terms of Ge/Ga ratios and other properties, group IIF shows genetic links to the Eagle station pallasites and CO/CV chondrites. The iron with the highest Ni concentration, Oktibbeha County, is a member of group IAB, and it extends the concentration ranges of all elements in this nonmagnetic group.

Kracher, A.↗
DOE OSTI2022

The concentration of BTEX in selected urban areas of Malaysia during the COVID-19 pandemic lockdown

Volatile organic compounds (VOCs) such as benzene, toluene, ethylbenzene and xylene (BTEX) are air pollutants that harm human health. This study aims to identify BTEX concentrations before the lockdown known as the Movement Control Order was imposed (BMCO), during the implementation of the Movement Control Order (MCO), and then during the Conditional Movement Control Order (CMCO). These orders were introduced during the COVID-19 pandemic in Malaysia. The study utilised data measured by the continuous monitoring of BTEX using online gas chromatography instruments located at three urban area stations. Here, the results showed that the BTEX concentrations reduced by between –38% and –46% during the MCO compared to the BMCO period. The reduction of human mobility during the MCO and CMCO influenced the lower BTEX concentrations recorded at a station within the Kuala Lumpur area. The results of the BTEX diagnostic ratios and principal component analysis showed that the major source of BTEX, especially during the BMCO and CMCO periods, was motor vehicle emissions. Further investigation, using correlation analysis and polar plots, showed that the BTEX concentrations were also influenced by meteorological variables such as wind speed, air temperature and relative humidity.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Performance of a bicone inlet designed for Mach 2.5 with internal distributed compression and 40 percent internal contraction

The inlet was designed to have the minimum internal contraction consistent with high total-pressure recovery and low cowl drag. Without a bypass system, the peak pressure recoveries increased from 0.890 to 0.936 when the supercritical bleed mass flow ratio was varied from 0.035 to 0.060. With an operating bypass system and installed centerbody vortex generators, a slight increase in peak pressure recovery was obtained. The values of steady-state distortion and dynamic distortion were below 0.10 and 0.02, respectively, near critical operation. Simulation of a turbofan engine with concentric pipes showed no effect on compressor face flow profiles with varying bypass flow ratio.

Wasserbauer, J. F.↗
DOE OSTI2025

Radial burnup characteristics of spent fuel pellets by zirconium analysis

Resonance ionization mass spectrometry is a powerful tool for in-situ measurements of elemental ratios in micrometer-sized spent fuel samples. By measuring the concentration of the fission product Zr we provide a framework for determining fuel burnup while simultaneously considering the 239 Pu fission fraction. Here, the analyzed spent fuel samples were taken from different fuels and distances from the fuel pellets’ edge. Results show a burnup enhancement at the edge of a fuel pellet of 180–220% compared to the center of the pellet. By comparing the concentration of the anthropogenic 93 Zr to the naturally occurring Zr isotopes, any influence of non-fissiogenic Zr or disturbing neutron capture reactions can be ruled out. This established 93 Zr as a new tool to measure fuel burnup.

Burnup↗
DOE OSTI2023

Separation of volatile organic contaminants from water using a direct-contact dehumidifier: An experimental study and modeling

A packed-bed, direct-contact dehumidifier (PB-DCD) has been developed to selectively condense water from a gaseous mixture of organic contaminants. In this process, hot air is humidified by mixing with wastewater vapor in a static mixer and is dehumidified by subcooled fresh water passing through the PB-DCD in a counter-current configuration. The goal of this study is to understand the relationship between various operating parameters and how they affect separation of isopropyl alcohol (IPA) from the gaseous mixture with the purpose of expanding the investigation to other contaminants in the future. The process has been successfully used to separate IPA from wastewater. Different parameters including the concentration of IPA in water, feed temperature, air-to-vapor ratio, and cooling-water-to-vapor mass ratio, as well as residence time were examined to determine their influence on contaminant separation and clean water recovery rate. The Buckingham Pi theorem was applied to reduce the number of studying variables by generating non-dimensional groups. Experiments were performed to determine the relationship between the non-dimensional parameters and model mass transfer in the system. Mass transfer coefficients for multicomponent gaseous mixture condensation in a packed-bed direct contact condenser column are calculated and a modified correlation of mass transfer is developed. The parameters of the mass transfer model are obtained from operating conditions of the PB-DCD, stream conditions and thermodynamic properties. A modified Sherwood correlation is developed to predict IPA separation from a gaseous mixture consisting of air, water, and IPA. The modified Sherwood correlation is applied to successfully predict the Sherwood number with a mean absolute error equal to 6.6 %. According to the experimental results, the maximum IPA separation achieved was 76.3 %, which corresponds to a water recovery rate of 58.7 %.

42 ENGINEERING↗