Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHARTS - STRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Comparison of advanced propulsion concepts for deep space exploration

Equations and charts are presented that permit rapid estimation of propulsion-system performance requirements for some typical deep-space missions. A number of advanced propulsion concepts for which performance estimates are available are compared with respect to their capability for flyby, rendezvous, and roundtrip planetary missions. Based on these estimates, the gas-core nuclear fission rocket and the pulsed fusion rocket yield the fastest trip times to the near planets. For round trips to Jupiter and beyond, the controlled fusion rocket shows progressively superior capabilities. Several propulsion concepts based on use of impinging laser beams are found to be noncompetitive with the other advanced concepts for deep space missions. Requirements for attainment of interstellar distances within a human lifetime are found to be some orders of magnitude beyond the capabilities of any propulsion concepts for which performance estimates are now possible.

Moeckel, W. E.↗

A survey of modal synthesis methods.

Several modal synthesis procedures for the dynamic analysis of largy composite structural systems are surveyed. The matrix formulation of the free-free modal synthesis procedures is presented. Also given are schematic flow charts of the analysis procedure used in three prominent methods. The advantages and disadvantages of several modal synthesis methods for different classes of structural problems are presented in order to enable the engineer to select the best procedure for his particular type of problem.

Hart, G. C.↗

Measurement of total electron content with a geostationary satellite during the solar eclipse of March 7, 1970.

This note deals with the measurement of the total electron content of the ionosphere at the Goddard Space Flight Center, looking towards the geostationary satellite ATS 3 during the solar eclipse of Mar. 7, 1970. Obscuration at this site was nearly total. Faraday rotation was measured with a stationary circularly polarized antenna and a dual-channel phase-lock receiver tuned to 137.350 MHz. By comparing the electrical phase of the two opposite circularly polarized components, a continuous chart recording was made of Faraday rotation vs local time. A depletion of about 25% in electron content was observed from first contact to the time of minimum electron content. The time variations of the electron content during the eclipse are briefly examined in the light of current theories of ionospheric processes.

Rangaswamy, S.↗

Dynamic analysis of large structures by modal synthesis techniques.

Several criteria that may be used to evaluate the merits of some of the existing techniques for the dynamic analysis of large structures which involve division into substructures or components are examined. These techniques make use of component displacement modes to synthetize global systems of generalized coordinates and, for that reason, they have come to be known as modal synthesis or component mode methods. Two techniques have been found to be particularly useful - i.e., the modal synthesis method with fixed attachment modes, and the modal synthesis method with free attachment modes. These two methods are treated in detail, and general flow charts are presented for guidance in computer programming.

Hurty, W. C.↗

A distributed lumped active all-pass network configuration.

In this correspondence a new and interesting distributed lumped active network configuration that realizes an all-pass network function is described. A design chart for determining the values of the network elements is included.

Huelsman, L. P.↗

A computer method for schedule processing and quick-time updating.

A schedule analysis program is presented which can be used to process any schedule with continuous flow and with no loops. Although generally thought of as a management tool, it has applicability to such extremes as music composition and computer program efficiency analysis. Other possibilities for its use include the determination of electrical power usage during some operation such as spacecraft checkout, and the determination of impact envelopes for the purpose of scheduling payloads in launch processing. At the core of the described computer method is an algorithm which computes the position of each activity bar on the output waterfall chart. The algorithm is basically a maximal-path computation which gives to each node in the schedule network the maximal path from the initial node to the given node.

Mccoy, W. H.↗

Improved format for radiocardiographic data

Technique involves introduction of radioactive sample into antecubital vein. Scintillation crystal mounted in collimating housing views portion of right and left hearts. As radioactive sample passes through heart, counting rate is measured by crystal and recorded on strip chart. Data is insensitive to geometric effects and other parameters.

Dimeff, J.↗

DORCA 2 computer program. Volume 2: Programmer's manual

A guide for coding the Dynamic Operational Requirements and Cost Analysis Program (DORCA 2) is presented. The manual provides a detailed operation of every subroutine, the layout in core of the major matrices and arrays, and the meaning of all program values. Flow charts are included.

Gold, B. J.↗

Random response of rectangular panels to the pressure field beneath a turbulent boundary layer in subsonic flows

The response of a rectangular panel under the excitation of a turbulent boundary layer with a zero longitudinal mean pressure gradient in a subsonic flow was studied in detail. The method of normal mode was used together with the technique of spectral analysis. Both simply supported and clamped edge conditions of a panel were considered, and the displacement power spectral density of the panel response was computed. The results for the clamped edge panel compare favorably with existing data. Charts of structural acceptance, which provide a framework for estimating the response of other rectangular panels, are presented, and the physical significances of structural acceptances discussed.

Chyu, W. J.↗

Basic research in meteorology and atmospheric physics

A survey is reported of methods for sounding the atmospheric temperature profile by remote measurements. The emphasis for this period was placed on sounding in the microwave region of the spectrum, sounding in cloudy atmosphere, and measuring sea temperatures remotely. Summaries of the research in the following areas are included: orbital detection of stratospheric aerosols, monthly precipitation charts for the world, determining planetary cloud structure by remote polarization measurement, analysis of Mariner 6 and 7 multicolor photometric photographs of Mars, and techniques for photometric detection of extrasolar planets.

Opstbaum, R.↗

Analyses of solar viewing time, beta angle, and doppler shift for solar observations from the space shuttle

Studies of solar physics phenomena are aided by the ability to observe the sun from earth orbit without periodic occultation. Charts are presented for the selection of suitable orbits about the earth at which a spacecraft is continuously illuminated through a period of a few days. Selection of the orbits considers the reduction of Doppler shift and wavefront attenuation due to relative orbital velocity and residual earth atmosphere.

Brandon, J. P.↗

An interdisciplinary study of the estuarine and coastal oceanography of Block Island Sound and adjacent New York coastal waters

The author has identified the following significant results. The synoptic repetitive coverage of the multispectral imagery from the ERTS-1 satellite, when photographically reprocessed using the state-of-the-art techniques, has given indication of spectral differences in Block Island and adjacent New England waters which were heretofore unknown. Of particular interest was the possible detection of relatively small amounts of phytoplankton prior to the occurrence of the red tide in Massachusetts waters. Preparation of spatial and temporal hydrographic charts using ERTS-1 imagery and ground truth analysis will hopefully determine the environmental impact on New York coastal waters.

Yost, E.↗

Remote Sensing of Sea Ice from Earth Satellites

The application of meteorological satellite data for mapping ice fields is discussed. The characteristics of the photographic records of sea ice formations are described. The derivation of the composite minimum brightness chart by computer processing of the mapped satellite vidicon data for several successive days is explained. The factors which create a quantitative delimiting of the sea ice conditions are explained.

Mcclain, E. P.↗

Use of ERTS Data for Mapping Snow Cover in the Western United States

The author has identified the following significant results. Results of the analysis of the initial sample of ERTS-1 data indicate that the MSS-5 spectral band is the most useful for detecting and mapping mountain snow cover. At the ERTS-1 resolution, snow cover can be readily detected in the MSS-5 band and can be distinguished from clouds. Snow line elevations have been mapped for five mountain areas. In one case for the Salt-Verde watershed in Arizona good agreement is observed between the location of the snow line as mapped from the ERTS-1 data and as depicted on an aerial snow survey chart compiled a week earlier. Examination of data from the Arctic has revealed that multispectral data can provide information on glacial conditions that cannot be ascertained from observations in a single spectral band.

Barnes, J. C.↗

Estimating Weibull parameters for materials

The statistical analysis of strength and fracture of materials in general, with application to fiber composites are discussed. The weakest link model is considered in a fairly general form, and the resulting equations are demonstrated by using a Weibull distribution for flaws. This distribution appears naturally in a variety of problems, and therefore additional attention is devoted to analysis and statistical estimation connected with this distribution. Special working charts are included to facilitate interpretation of observed data and estimation of parameters. Implications of the size effect are considered for various kinds of flaw distributions. Failure and damage in a fiber-reinforced system are described. Some useful graphs are included for predicting the strength of such a system. Recent data on organic-fiber (PRD 49) composite material is analyzed by the Weibull distribution with the methods presented.

Robinson, E. Y.↗

A composite study of cloud, ozone and other data from recent satellite experiments

Pictorial data from the Image Dissector Camera System (IDCS) and Temperature-Humidity Infrared Radiometer (THIR) experiments on Nimbus 4 satellite are analyzed along with: (a) global total ozone maps prepared from Infrared Interferometer Spectrometer (IRIS) data and (b) total ozone and its vertical distribution as derived from Backscatter Ultraviolet (BUV) spectrometer data. A close relationship is generally observed between centers of high ozone and vortices in the IDCS and THIR montages. This is also confirmed by low centers in the 200 mb Northern Hemisphere charts. The vertical distribution of ozone indicates that the enhancement in ozone in these cases occurs in the lower stratosphere (and possibly to a minor extent in the troposphere) rather than in the upper stratosphere and mesosphere.

Rao, M. S. V.↗

Control system optimization studies. Volume 1: Payload deployment study

An analysis of the critical parameters involved in designing systems for spacecraft maneuvers involved in stationkeeping, docking, orbital assembly, satellite inspection and retrieval, and payload deployment is presented. The fixed base simulation was performed on a hybrid computer and includes a cathode ray tube display so that the maneuvers can be visually monitored by a pilot located in the active vehicle. Both automatic and manual control modes are included and the pilot can switch between the two modes as desired. A complete description of the hybrid simulation is provided and simulation results are described. Major digital subroutines, flow charts, and analog wiring diagrams are provided.

Heeschen, G. M.↗

Documentation: Motivation and training or automation

The road blocks and mental blocks in areas where automation is not taking care of basic documentation problems are discussed. Original project documentation, documentation for project maintenance, and comparison of preliminary and final documentation are described. The use of flow charts is also mentioned.

Mouton, M. L.↗