Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Thermodynamical study of boron doped CeX{sub 3} (X=Pd, Rh)

The structural, electronic, thermal, and optical properties of cubic non magnetic CeX{sub 3}(X=Pd, Rh) compounds which crystallize in the Au{sub 3}Cu structure have been studied using the projected augmented wave (PAW) method within the density functional theory (DFT) with generalized gradient approximation (GGA) for exchange correlation potential. In this paper we have calculated the band structure which are interpreted using the density of states. The optical properties such as extinction coefficients clearly illustrate the changes in CeX{sub 3} due to intercalation of boron. Lattice instability is observed in CePd{sub 3}B from the calculated dynamical properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly conducting and preferred <220> oriented boron doped nc–Si films for window layers in nc–Si solar cells

Growth and optimization of the boron dopednanocrystalline silicon (nc-Si) films have been studied by varyingthe gaspressure applied to the hydrogendiluted silane plasma in RF (13.56 MHz) plasma-enhanced chemical vapor deposition (PECVD) system, using diborane (B{sub 2}H{sub 6}) as the dopant gas. High magnitudeof electrical conductivity (~10{sup 2} S cm{sup −1}) and<220>orientedcrystallographic lattice planes have been obtained with high crystalline volume fraction (~86 %) at an optimum pressure of 2.5 Torr. XRD and Raman studies reveal good crystallinity with preferred orientation, suitable for applications in stacked layer devices, particularly in nc–Si solar cells.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Avalanche proton-boron fusion based on elastic nuclear collisions

Recent experiments done at Prague with the 600 J/0.2 ns PALS laser interacting with a layer of boron dopants in a hydrogen enriched target have produced around 10{sup 9} alphas. We suggest that these unexpected very high fusion reactions of proton with {sup 11}B indicate an avalanche multiplication for the measured anomalously high nuclear reaction yields. This can be explained by elastic nuclear collisions in the broad 600 keV energy band, which is coincident with the high nuclear p-{sup 11}B fusion cross section, by the way of multiplication through generation of three secondary alpha particles from a single primarily produced alpha particle.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Growth and device processing of hexagonal boron nitride epilayers for thermal neutron and deep ultraviolet detectors

Solid-state neutron detectors with high performance are highly sought after for the detection of fissile materials. However, direct-conversion neutron detectors based on semiconductors with a measureable efficiency have not been realized. We report here the first successful demonstration of a direct-conversion semiconductor neutron detector with an overall detection efficiency for thermal neutrons of 4% and a charge collection efficiency as high as 83%. The detector is based on a 2.7 μm thick {sup 10}B-enriched hexagonal boron nitride (h-BN) epitaxial layer. The results represent a significant step towards the realization of practical neutron detectors based on h-BN epilayers. Neutron detectors based on h-BN are expected to possess all the advantages of semiconductor devices including wafer-scale processing, compact size, light weight, and ability to integrate with other functional devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ablation of hexagonal boron nitride by UV laser radiation

We report an experimental study of ablation of hexagonal boron nitride ceramics irradiated by 193- and 248-nm laser pulses. The dependences of the material removal rate and the crater wall slope on the energy density in the irradiation spot are obtained. An ablation regime is found, when the material removal rate reaches 5 mm per pulse, which is not typical of nanosecond laser radiation. It is shown that at relatively low radiation intensities (about 5–10 J cm{sup −2}), the slope angle of the formed crater wall does not exceed 20°. (interaction of laser radiation with matter)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-induced depolarization and resonance in Raman scattering of single-crystalline boron carbide

We report polarized and resonant Raman scattering of single-crystal boron carbide (B{sub 4}C) at high pressures. Significant intensity enhancements of 270 and 1086 cm{sup -1} Raman bands of B{sub 4}C have been observed at quasihydrostatic pressures higher than approx20 GPa. The pressure-induced intensity change of the 1086 cm{sup -1} band is mainly due to the resonance between excitation energy and electronic transition, whereas the intensity change of 270 cm{sup -1} band is caused by the depolarization effect. Importantly, the first-order phase transition has not been found at high quasihydrostatic pressures and all the Raman intensity changes along with the corresponding high-pressure lattice distortion can be recovered during unloading.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Homogeneous nanocables from double-walled boron-nitride nanotubes using first-principles calculations

Since electrons injected to a homogenous wire always tend to concentrate on its surface, heterogeneous coaxial structures are generally necessary to make nanocables with an insulating sheath. Here we reveal from first-principles calculations that double-walled boron-nitride nanotubes could be natural homogeneous nanocables as injected electrons prefer abnormally to concentrate on the inner semiconducting tube while the outer tube remains insulating. The ratio of extra electrons on the inner tube to total carriers in the double-walled nanotubes can be tuned widely by changing either the tube diameter or the local tube curvature through radial deformation, both attributed to the predominant band filling and weak enhancement in Coulomb interaction within the inner wall where the sublattice asymmetry is strongly attenuated by curvature effect. This exotic charge screening is universal for any form of electron-doping sources.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

First-principles study of boron oxygen hole centers in crystals: Electronic structures and nuclear hyperfine and quadrupole parameters

The electronic structures, nuclear hyperfine coupling constants, and nuclear quadrupole parameters of fundamental boron oxygen hole centers (BOHCs) in zircon (ZrSiO{sub 4}, I4{sub 1}/amd) and calcite (CaCO{sub 3}, R3c) have been investigated using ab initio Hartree-Fock (HF) and various density functional theory (DFT) methods based on the supercell models with all-electron localized basis sets. Both exact HF exchange and appropriate correlation functionals are important in describing the BOHCs, and the parameter-free hybrid method based on Perdew, Burke, and Ernzerhof density functionals (PBE0) turns out to be the best DFT method in reproducing the electron paramagnetic resonance (EPR) data. Our results reveal three distinct types of simple-spin (S = 1/2) [BO{sub 3}]{sup 2-} centers in calcite: (i) the classic [BO{sub 3}]{sup 2-} radical with the D{sub 3h} symmetry and the unpaired spin equally distributed on the three oxygen atoms (i.e. the O{sub 3}{sup 5-} type); (ii) the previously reported [BO{sub 2}]{sup 0} center with the unpaired spin equally distributed on two of the three oxygen atoms (O{sub 2}{sup 3-}); and (iii) a new variety with {approx}90% of its unpaired spin localized on one (O{sup -}) of the three oxygen atoms with a long B-O bond (1.44 A). Calculations confirm the unusual [BO{sub 4}]{sup 0} center in zircon and show it to arise from a highly distorted configuration with 90% of the unpaired spin on one oxygen atom that has a considerably longer B-O bond (1.68 A) than its three counterparts (1.45 A). The calculated magnitudes and directions of {sup 11}B and {sup 17}O hyperfine coupling constants and nuclear quadrupole constants for the [BO{sub 4}]{sup 0} center in zircon are in excellent agreement with the 15 K EPR experimental data. These BOHCs are all characterized by a small negative spin density on the central B atom arising from spin polarization. Our calculations also demonstrate that the spin densities on BOHCs are affected substantially by crystalline environments, and so periodic boundary treatment, such as the supercell scheme, is a must in accounting for the electronic and spin structures of BOHCs in crystals. These atomistic and electronic models of BOHCs in the crystalline matrices provide new insights into their precursors and counterparts in glasses and other amorphous materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling Changes in Measured Conductance of Thin Boron Carbide Semiconducting Films Under Irradiation

Semiconducting, p-type, amorphous partially dehydrogenated boron carbide films (a-B 10 C 2+x :H y ) were deposited utilizing plasma enhanced chemical vapor deposition (PECVD) onto n-type silicon thus creating a heterojunction diode. A model was developed for the conductance of the device as a function of perturbation frequency (f) that incorporates changes of the electrical properties for both the a-B 10 C 2+x :H y film and the silicon substrate when irradiated. The virgin model has 3 independent variables (R1, C1, R3), and 1 dependent variable (f). These samples were then irradiated with 200 keV He + ions, and the conductance model was matched to the measured data. It was found that initial irradiation (0.1 displacements per atom (dpa) equivalent) resulted in a decrease in the parallel junction resistance parameter from 6032 Ω to 2705 Ω. Further irradiation drastically increased the parallel junction resistance parameter to 39000 Ω (0.2 dpa equivalent), 77440 Ω (0.3 dpa equivalent), and 190000 Ω (0.5 dpa equivalent). It is believed that the initial irradiation causes type inversion of the silicon substrate changing the original junction from a p-n to a p-p+ with a much lower barrier height leading to a lower junction resistance component between the a-B 10 C 2+x :H y and irradiated silicon. In addition, it was found that after irradiation, a second parallel resistor and capacitor component is required for the model, introducing 2 additional independent variables (R2, C2). This is interpreted as the junction between the irradiated and virgin silicon near ion end of range.

36 MATERIALS SCIENCE↗

Dilute hydrogen plasma cleaning of boron from silicon after etching of HfO{sub 2} films in BCl{sub 3} plasmas: Substrate temperature dependence

The authors have investigated the effects of elevated substrate temperature (T{sub s}) on cleaning of boron residues from silicon substrates in 1%H{sub 2}-Ar plasmas, following etching of HfO{sub 2} in BCl{sub 3} plasmas. Vacuum-transfer x-ray photoelectron spectroscopy (XPS) provided a measure of total B removal rates, as well as information on individual BCl{sub x}O{sub y} moities. B cleaning rates increased with T{sub s} in an Arrhenius manner, with an apparent activation energy of 1.7 kcal/mol. Conversely, the Si etching rate decreased with increasing substrate temperature with an apparent activation energy of -0.8 kcal/mol. Therefore, when considering selectivity with respect to Si etching, it is advantageous to remove B at higher T{sub s}. For example, at T{sub s}=235 deg. C, {approx}90% of B is cleaned from Si in 10 s, while <1.5 nm of Si is removed. An apparent diffusion of H into the near-surface region of Si at higher temperatures, detected indirectly by a shift and broadening of the Si(2p) XPS peak, may limit the maximum optimum substrate temperature, however. It was also found that Si does not etch in 1%H{sub 2}/Ar plasmas if an oxide layer is present.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Layered structure of anodic SiO{sub 2} films doped with phosphorus or boron

It is shown that anodic silicon oxide films deposited by reanodization (repeated anodic oxidation) of p- and n-type silicon in phosphate (1.5 M H{sub 3}PO{sub 4}), borate (1.5 M H{sub 3}BO{sub 3}), and nitrate (0.04 M NH{sub 4}NO{sub 3}) electrolytes based on tetrahydrofurfuryl alcohol have a three- or four-layer structure both before and after high-temperature annealing. It is assumed that this circumstance accounts for the nonuniform distribution of phosphorus and boron across the thickness of anodic SiO{sub 2}.

36 MATERIALS SCIENCE↗

Structural Features, Physicochemical, and Optical Characteristics of Lithium Niobate Crystals Grown from Boron-Doped Melts

Chemical interactions in the Li{sub 2}O−B{sub 2}O{sub 3}−Nb{sub 2}O{sub 5} system, as well as certain features of crystallization of LiNbO{sub 3} crystals growing from melts containing nonmetal impurities, are considered. It is shown that boron changes the structure of the melt and has a significant impact on the structure and physical characteristics of LiNbO{sub 3} : В crystals, practically not entering the lithium niobate structure. Notable changes and certain features were found in the Raman spectra of grown LiNbO{sub 3} : В crystals, which indicates changing the sequence of the main cations and vacancies along a crystal polar axis and distortion of the oxygen octahedrons. Meanwhile, the distortion of the oxygen octahedrons is anisotropic. LiNbO{sub 3} : В crystals have a higher structural homogeneity than congruent crystals, and are close in the number of NbLi defects to a crystal with a stoichiometric composition, differing from it by a substantially less photorefraction effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Review—hexagonal boron nitride epilayers: Growth, optical properties and device applications

This paper provides a brief overview on recent advances made in authors’ laboratory in epitaxial growth and optical studies of hexagonal boron nitride (h-BN) epilayers and heterostructures. Photoluminescence spectroscopy has been employed to probe the optical properties of h-BN. It was observed that the near band edge emission of h-BN is unusually high and is more than two orders of magnitude higher than that of high quality AlN epilayers. It was shown that the unique quasi-2D nature induced by the layered structure of h-BN results in high optical absorption and emission. The impurity related and near band-edge transitions in h-BN epilayers were probed for materials synthesized under varying ammonia flow rates. Our results have identified that the most dominant impurities and deep level defects in h-BN epilayers are related to nitrogen vacancies. By growing h-BN under high ammonia flow rates, nitrogen vacancy related defects can be eliminated and epilayers exhibiting pure free exciton emission have been obtained. Deep UV and thermal neutron detectors based on h-BN epilayers were shown to possess unique features. Lastly, it is our belief that h-BN will lead to many potential applications from deep UV emitters and detectors, radiation detectors, to novel 2D photonic and electronic devices.

36 MATERIALS SCIENCE↗

Size-scaling of tensile failure stress in boron carbide

Weibull strength-size-scaling in a rotary-ground, hot-pressed boron carbide is described when strength test coupons sampled effective areas from the very small (~ 0.001 square millimeters) to the very large (~ 40,000 square millimeters). Equibiaxial flexure and Hertzian testing were used for the strength testing. Characteristic strengths for several different specimen geometries are analyzed as a function of effective area. Characteristic strength was found to substantially increase with decreased effective area, and exhibited a bilinear relationship. Machining damage limited strength as measured with equibiaxial flexure testing for effective areas greater than ~ 1 mm2 and microstructural-scale flaws limited strength for effective areas less than 0.1 mm2 for the Hertzian testing. The selections of a ceramic strength to account for ballistically-induced tile deflection and to account for expanding cavity modeling are considered in context with the measured strength-size-scaling.

36 MATERIALS SCIENCE↗

Boron-lined parallel-plate Collar

This report presents boron-lined parallel plate technology features, experimental benchmarking of initial MCNP model, and parallel-plate UNCL collar optimization.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

X-ray Excited Optical Luminescence from Hexagonal Boron Nitride Nanotubes: Electronic Structures and the Role of Oxygen Impurities

We report a study on the optical luminescence properties and the electronic structures of boron nitride nanotubes (BNNTs). BNNTs with natural B (80% {sup 11}B and 20% {sup 10}B) and pure {sup 10}B are investigated in comparison with hexagonal BN crystals using X-ray absorption near-edge structures (XANES) and X-ray excited optical luminescence (XEOL). We find that the BNNT specimen synthesized with natural B contains more oxide impurities than that with pure {sup 10}B, resulting in significantly different behavior in optical luminescence. All BN samples with hexagonal structures are found to emit strong luminescence, but the emission spectra are strongly morphology- and structure-dependent. XEOL and XANES measurements were carried out at the B K-edge, N K-edge, and O K-edge in order to reveal the origin of different luminescence channels and the corresponding electronic structures in these BN materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal Conductivity and Seebeck Coefficients of Icosahedral Boron Arsenide Films on Silicon Carbide

The thermal conductivity of icosahedral boron arsenide (B{sub 12}As{sub 2}) films grown on (0001) 6H-SiC substrates by chemical vapor deposition was studied by the 3{omega} technique. The room temperature thermal conductivity decreased from 27.0 to 15.3 W/m K as the growth temperature was decreased from 1450 to 1275 C. This is mainly attributed to the differences in the impurity concentration and microstructure, determined from secondary ion mass spectrometry and high resolution transmission electron microscopy, respectively. Callaway's theory was applied to calculate the temperature-dependent thermal conductivity, and the results are in good agreement with the experimental data. Seebeck coefficients were determined as 107 {micro}V/K and 136 {micro}V/K for samples grown at 1350 C with AsH{sub 3}/B{sub 2}H{sub 6} flow ratio equals to 1:1 and 3:5, respectively.

36 MATERIALS SCIENCE↗

Boron effects on fission product behavior under severe accident conditions

This paper addresses basic studies for the evaluation of boron (B) release from a degraded BWR control rod and its effect on cesium (Cs) and iodine (I) chemistry during a severe accident. Possible increase of gaseous iodine release induced by released B was predicted under various atmospheres by chemical equilibrium calculations. Results showed that the change in atmosphere affects B release fraction from the control rod and also the generation of volatile iodine species with the formation of CsBO{sub 2}. Under a steam-starvation atmosphere, B release fraction could be reduced by the formation of stable iron (Fe)-B alloys in the molten control rod materials and, therefore, the generation of gaseous iodine as well as CsBO{sub 2} are considered to be suppressed. The calculations results show that the B release kinetics as well as the atmosphere play an important role for the Cs and I vapor species. For the validation of these results, basic experiments for the evaluation of B release kinetics, thermochemical properties and phase states of Cs-B-O complex compounds, and reproduction tests focused on FP release and transport are underway. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗