Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bond”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Unifying chemical bonding models for boranes

We demonstrate, based on first-principles calculations, that chemical bonding in deltahedral boron hydrides, BnHn { z also known as closo boranes, can be understood within the three-center two-electron (3c2e) bonding model in line with other families of boranes. We show that bonding in the triangular lattice of BnHn { cages can be described by delocalized resonant 3c2e bonding of electrons, giving rise to naromaticity. Such delocalization, in the case of B12H122 {, leads to well-defined electronic shell structure. We also find that the reason for all the BnHn { to be dianions can be attributed to the reduction of boron coordination number in the deltahedral cage structure from that of boron sheet with triangular lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of pi-stacking, h-bonding, and electrostatic interactions on the ionization energies of nucleic acid bases: adenine-adenine, thymine-thymine and adenine-thymine dimers

A combined theoretical and experimental study of the ionized dimers of thymine and adenine, TT, AA, and AT, is presented. Adiabatic and vertical ionization energies(IEs) for monomers and dimers as well as thresholds for the appearance of the protonated species are reported and analyzed. Non-covalent interactions stronglyaffect the observed IEs. The magnitude and the nature of the effect is different for different isomers of the dimers. The computations reveal that for TT, the largestchanges in vertical IEs (0.4 eV) occur in asymmetric h-bonded and symmetric pi- stacked isomers, whereas in the lowest-energy symmetric h-bonded dimer the shiftin IEs is much smaller (0.1 eV). The origin of the shift and the character of the ionized states is different in asymmetric h-bonded and symmetric stacked isomers. Inthe former, the initial hole is localized on one of the fragments, and the shift is due to the electrostatic stabilization of the positive charge of the ionized fragment by thedipole moment of the neutral fragment. In the latter, the hole is delocalized, and the change in IE is proportional to the overlap of the fragments' MOs. The shifts in AAare much smaller due to a less effcient overlap and a smaller dipole moment. The ionization of the h-bonded dimers results in barrierless (or nearly barrierless) protontransfer, whereas the pi-stacked dimers relax to structures with the hole stabilized by the delocalization or electrostatic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polar Cation Ordering: A Route to Introducing >10% Bond Strain Into Layered Oxide Films

The 3d transition metal (M) perovskite oxides exhibit a remarkable array of properties, including novel forms of superconductivity, magnetism and multiferroicity. Strain can have a profound effect on many of these properties. This is due to the localized nature of the M 3d orbitals, where even small changes in the M–O bond lengths and M–O–M bond angles produced by strain can be used to tune the 3d– O 2p hybridization, creating large changes in electronic structure. We present a new route to strain the M–O bonds in epitaxial two-dimensional perovskite films by tailoring local electrostatic dipolar interactions within every formula unit via atomic layer-by-layer synthesis. The response of the O anions to the resulting dipole electric fields distorts the M–O bonds by more than 10%, without changing substrate strain or chemical composition. We found that this distortion is largest for the apical oxygen atoms (O ap ), and alters the transition metal valence state via self-doping without chemical substitution.

36 MATERIALS SCIENCE↗

Impacts of Bond Type and Grafting Density on the Thermal, Structural, and Transport Behaviors of Nanoparticle Organic Hybrid Materials–Based Electrolytes

Nanoscale Organic Hybrid Materials (NOHMs) consist of polymers tethered to a nanoparticle surface, and NOHMs formed with an ionic bond between the polymer and nanoparticle have been proposed for electrochemical applications. NOHMs exhibit negligible vapor pressure, chemical tunability, oxidative thermal stability, and high ionic conductivity making them attractive in reactive and separation systems. In this study, NOHMs are synthesized by tethering Jeffamine M2070 (HPE) to SiO 2 nanocores via ionic (NOHM-I-HPE) and covalent (NOHM-C-HPE) bonding to investigate the effect of the bond type on the thermal, structural and transport properties of the tethered HPE. In the neat state, NOHM-C-HPE displays the highest thermal stability in a nitrogen atmosphere, while NOHM-I-HPE is the most stable under oxidative conditions. Small-angle neutron scattering (SANS) reveals the presence of multiple types of HPE polymers in aqueous solutions of NOHM-I-HPE (i.e., tethered, interacting, and free), whereas only tethered HPE is observed in NOHM-C-HPE systems. Moreover, the SANS profiles identify clustering of NOHM-C-HPE in aqueous solutions, but not in the corresponding NOHM-I-HPE solutions, suggesting that the free HPE chains stabilize the dispersion of NOHM-I-HPE. Furthermore, the results of this study elucidate how the bond type and grafting density can be used to tune the properties of NOHMs.

25 ENERGY STORAGE↗

Ambient Synthesis of Single‐Atom Catalysts from Bulk Metal via Trapping of Atoms by Surface Dangling Bonds

Abstract Single‐atom catalysts (SACs) feature the maximum atom economy and superior performance for various catalysis fields, attracting tremendous attention in materials science. However, conventional synthesis of SACs involves high energy consumption at high temperature, complicated procedures, a massive waste of metal species, and poor yields, greatly impeding their development. Herein, a facile dangling bond trapping strategy to construct SACs under ambient conditions from easily accessible bulk metals (such as Fe, Co, Ni, and Cu) is presented. When mixing graphene oxide (GO) slurry with metal foam and drying in ambient conditions, the M 0 would transfer electrons to the dangling oxygen groups on GO, obtaining M δ+ (0 < δ < 3) species. Meanwhile, M δ+ coordinates with the surface oxygen dangling bonds of GO to form MO bonds. Subsequently, the metal atoms are pulled out of the metal foam by the MO bonds under the assistance of sonication to give M SAs/GO materials. This synthesis at room temperature from bulk metals provides a versatile platform for facile and low‐cost fabrication of SACs, crucial for their mass production and practical application in diverse industrial reactions.

Qu, Yunteng↗

Site-Selective Functionalization of (sp 3 )C-H Bonds Catalyzed by Artificial Metalloenzymes Containing an Iridium-Porphyrin Cofactor

The selective functionalization of one C-H bond over others in nearly identical steric and electronic environments can facilitate the construction of complex molecules. We report site-selective functionalizations of C-H bonds, differentiated solely by remote substituents, catalyzed by artificial metalloenzymes (ArMs) that are generated from the combination of an evolvable P450 scaffold and an iridium-porphyrin cofactor. The generated systems catalyze the insertion of carbenes into the C-H bonds of a range of phthalan derivatives containing substituents that render the two methylene positions in each phthalan inequivalent. These reactions occur with site-selectivity ratios of up to 17.8:1 and, in most cases, with pairs of enzyme mutants that preferentially form each of the two constitutional isomers. This study demonstrates the potential of abiotic reactions catalyzed by metalloenzymes to functionalize C-H bonds with site selectivity that is difficult to achieve with small-molecule catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site-Selective Functionalization of (sp 3 )C-H Bonds Catalyzed by Artificial Metalloenzymes Containing an Iridium-Porphyrin Cofactor

The selective functionalization of one C-H bond over others in nearly identical steric and electronic environments can facilitate the construction of complex molecules. We report site-selective functionalizations of C-H bonds, differentiated solely by remote substituents, catalyzed by artificial metalloenzymes (ArMs) that are generated from the combination of an evolvable P450 scaffold and an iridium-porphyrin cofactor. The generated systems catalyze the insertion of carbenes into the C-H bonds of a range of phthalan derivatives containing substituents that render the two methylene positions in each phthalan inequivalent. These reactions occur with site-selectivity ratios of up to 17.8:1 and, in most cases, with pairs of enzyme mutants that preferentially form each of the two constitutional isomers. This study demonstrates the potential of abiotic reactions catalyzed by metalloenzymes to functionalize C-H bonds with site selectivity that is difficult to achieve with small-molecule catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical Bond Covalency in Superionic Halide Solid‐State Electrolytes

Abstract Halide solid‐state electrolytes (SSEs) are promising superionic conductors with high oxidative stability and ionic conductivity, making them attractive for all‐solid‐state lithium‐ion batteries. However, most studies have focused on ion‐stacking structures, overlooking the role of bond characteristics in ionic transport. Here, we investigate bond dynamics and the superionic transition (SIT) in bromide electrolyte, Li 3 InBr 6 , using synchrotron X‐ray techniques and ab initio molecular dynamics (AIMD) simulations. We demonstrate that the SIT in halide SSEs is driven by a thermally induced transition in bonding character (ionic to covalent) rather than a change in crystal phase. AIMD simulations further reveal enhanced Li⁺ diffusion and collective anion motion at elevated temperatures. Expanding our study to Li 3 LnBr 6 (Ln = Gd, Tb, Ho, Tm, and Lu), we confirm the widespread occurrence of SIT in this material class, with Li 3 GdBr 6 exhibiting the highest ionic conductivity (5.2 mS cm −1 at 298 K). More importantly, the ionic‐covalent transition is highly tunable through electrolyte modifications, such as cation/anion substitution and synthesis methods. Our findings provide a new perspective on ionic transport, highlighting the critical role of chemical bond characteristics in halide SSEs.

Chemistry↗

Bond Length Alternation and Internal Dynamics in Model Aromatic Substituents of Lignin

In this report broadband microwave spectra were recorded over the 2-18 GHz frequency range for a series of four model aromatic components of lignin; namely, guaiacol (ortho-methoxy phenol, G), syringol (2,6-dimethoxy phenol, S), 4-methyl guaiacol (MG), and 4-vinyl guaiacol (VG), under jet-cooled conditions in the gas phase. Using a combination of 13 C isotopic data and electronic structure calculations, distortions of the phenyl ring by the substituents on the ring are identified. In all four molecules, the r C(1)-C(6) bond between the two substituted C-atoms lengthens, leading to clear bond alternation that reflects an increase in the phenyl ring resonance structure with double bonds at r C(1)-C(2) , r C(3)-C(4) and r C(5)-C(6) . Syringol, with its symmetric methoxy substituents, possesses a microwave spectrum with tunneling doublets in the a-type transitions associated with H-atom tunneling. These splittings were fit to determine a barrier to hindered rotation of the OH group of 1975 cm -1 , a value nearly 50% greater than that in phenol, due to the presence of the intramolecular OH…OCH 3 H-bonds at the two equivalent planar geometries. In 4-methyl guaiacol, methyl rotor splittings are observed and used to confirm and refine an earlier measurement of the three-fold barrier V 3 = 67 cm -1 . Finally, 4-vinyl guaiacol shows transitions due to two conformers differing in the relative orientations of the vinyl and OH groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shedding Light on the Vibrational Signatures in Halogen‐Bonded Graphitic Carbon Nitride Building Blocks

Abstract The relative contributions of halogen and hydrogen bonding to the interaction between graphitic carbon nitride monomers and halogen bond (XB) donors containing C−X and C≡C bonds were evaluated using computational vibrational spectroscopy. Conventional probes into select vibrational stretching frequencies can often lead to disconnected results. To elucidate this behavior, local mode analyses were performed on the XB donors and complexes identified previously at the M06‐2X/aVDZ‐PP level of theory. Due to coupling between low and high energy C−X vibrations, the C≡C stretch is deemed a better candidate when analyzing XB complex properties or detecting XB formation. The local force constants support this conclusion, as the C≡C values correlate much better with the σ ‐hole magnitude than their C−X counterparts. The intermolecular local stretching force constants were also assessed, and it was found that attractive forces other than halogen bonding play a supporting role in complex formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

AlGaAs/Si dual-junction tandem solar cells by epitaxial lift-off and print-transfer-assisted direct bonding

A novel method is developed to realize a III-V/Si dual-junction photovoltaic cell by combining epitaxial lift-off (ELO) and print-transfer-assisted bonding methods. The adoption of ELO enables III-V wafers to be recycled and reused, which can further lower the cost of III-V/Si photovoltaic panels. For demonstration, high crystal quality, micrometer-thick, GaAs/AlGaAs/GaAs films are lifted off, transferred, and directly bonded onto Si wafer without the use of any adhesive or bonding agents. The bonding interface is optically transparent and conductive both thermally and electrically. Prototype AlGaAs/Si dual-junction tandem solar cells have been fabricated and exhibit decent performance.

14 SOLAR ENERGY↗

Electronic structure of Li 1,2,3 +,0,– and nature of the bonding in Li 2,3 +,0,–

Abstract The current study of the small lithium molecules Li 2 +,0,− and Li 3 +,0,− focuses on the nature of the bonding in these molecules as well as their structures and energetics (bond energies, ionization energies, and electron affinities). Valence CASSCF (2s,2p) calculations incorporate nondynamical electron correlation in the calculations, while the corresponding multireference configuration interaction and coupled cluster calculations incorporate dynamical electron correlation. Treatment of nondynamical correlation is critical for properly describing the Li 2,3 +,0,− molecules as well as the Li − anion with dynamical correlation, in general, only fine‐tuning the predictions. All lithium molecules and ions are bound, with the Li 3 + and Li 2 + ions being the most strongly bound, followed by Li 3 − , Li 2 , Li 2 − and Li 3 . The minimum energy structures of Li 3 +,0,− are, respectively, an equilateral triangle, an isosceles triangle, and a linear structure. The results of SCGVB calculations are analyzed to obtain insights into the nature of the bonding in these molecules. An important finding of this work is that interstitial orbitals, a concept first put forward by McAdon and Goddard in 1985, play an essential role in the bonding of all lithium molecules considered here except for Li 2 . The interstitial orbitals found in the Li 3 +,0 molecules likely give rise to the non‐nuclear attractors/maxima observed in these molecules.

Chemistry↗

Hydrogen bond–induced aqueous-phase surface modification of nanocellulose and its mechanically strong composites

Aqueous-phase surface modification of nanocellulose is desirable because nanocellulose is generally produced via water-based fibrillation. In this study, a hydrogen bond–induced surface modification of cellulose nanofibrils (CNFs) in water was developed. Tannic acid and polyvinylpyrrolidone were chosen to modify the CNFs because of their strong capacity for hydrogen bond formation. By tuning the hydrogen bond formation between CNFs, tannic acid, and polyvinylpyrrolidone, CNFs with different surface hydrophilicity were achieved. Additionally, the modified CNFs can assemble into strong and tough composites owing to the hydrogen bond network in the system. Modified CNFs demonstrated 76% higher tensile strength and 100% higher toughness than those of unmodified CNFs, reaching 162 MPa and 12.7 MJ/m 3 , respectively. This study provides a new water-based modification strategy for the nanocellulose, leading the way toward producing strong nanocellulose composites via noncovalent interaction.

36 MATERIALS SCIENCE↗

Mono-C,O-chelated bromo- and triflatosilanes with an amino acid moiety: salts or covalently bonded complexes?

Derivatives of the amino acids sarcosine and proline – triflates TsN(Me)CH{sub 2}C(O)N(Me)-CH{sub 2}SiMe{sub 2}OTf and Ns–Pro–N(Me)CH2SiMe2OTf (Ns is 4-NO{sub 2}C{sub 6}H{sub 4}SO{sub 2}) – were synthesized by the reaction of trimethylsilyl triflate with halosilanes prepared previously. Bromide NsNHCH(Me)C(O)N(Me)CH2SiMe2Br was synthesized by the cleavage of the Si–O–Si moiety of the appropriate disiloxane with excess acetyl bromide. The X-ray diffraction study of these compounds and of the previously characterized bromide TsN(Ac)CH{sub 2}C(O)N(Me) CH{sub 2}SiMe{sub 2}Br showed that the Si–O coordination bond lengths in the triflates are 1.7692(14)– 1.8623(14) Å. The interatomic distances between the bromine and silicon atoms are 2.7095(8) and 2.9704(7) Å, which indicates that these bonds are weak. To elucidate the nature of Si…X bonding (X = OTf, Br), the topological analysis of electron density was performed and {sup 29}Si NMR chemical shifts were calculated. The interatomic Si…X interaction in triflate TsN(Me)CH{sub 2}C(O)- N(Me)CH{sub 2}SiMe{sub 2}OTf and bromide TsN(Ac)CH{sub 2}C(O)N(Me)CH{sub 2}SiMe{sub 2}Br is weak. In triflate Ns–Pro–N(Me)CH{sub 2}SiMe{sub 2}OTf and bromide NsNHCH(Me)C(O)N(Me) CH{sub 2} SiMe{sub 2}Br, the Si…X interaction is significantly stronger and corresponds to a weak coordination bond. Hence, the tosylates can be considered as salts, whereas the para-nitrobenzenesulfonyl derivatives are monochelated five-coordinate silicon complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Signature of the hydrogen-bonded environment of liquid water in X-ray emission spectra from first-principles calculations

Based on ab initio molecular dynamics simulations and density functional theory, we performed a systematic theoretical study to elucidate the correlation between the H-bonded environment and Xray emission spectra of liquid water. The spectra generated from excited water molecules embedded in an intact H-bonded environment yield broader spectral peaks and a larger spectral range than the spectra generated from water molecules in a broken H-bonded environment. Such differences are caused by the local electronic structures on the excited water molecules within the core-hole lifetime that evolve differently through the rearrangement of neighboring water molecules in different H-bonded environments.

Shen, Huaze↗

Effect of Surface Self-Nanocrystallization on Diffusion Bonding Between a Titanium Alloy and a TiAl-Based Alloy

A self-nanocrystallization layer was prepared on the surface of a Ti alloy sample via shot peening to investigate its influence on the follow-up diffusion bonding between a titanium alloy and a TiAl-based alloy. The experiment results show that surface self-nanocrystallization treatment can accelerate the interface reaction between a Ti alloy and a TiAl alloy, lowering the bonding temperature of the sound joints by more than 50 K. Moreover, the thickness of the interface reaction layer plays an important role in the interfacial bonding strength. In this work, the maximum shear strength of the joint appears to have a thickness of about 1.8 μm. As a consequence, it is found that surface self-nanocrystallization treatment is helpful for optimizing the diffusion bonding process.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Binder Jetting: A Novel NdFeB Bonded Magnet Fabrication Process

Our goal of this research is to fabricate near-net-shape isotropic (Nd) 2 Fe 14 B-based (NdFeB) bonded magnets using a three dimensional printing process to compete with conventional injection molding techniques used for bonded magnets. Additive manufacturing minimizes the waste of critical materials and allows for the creation of complex shapes and sizes. The binder jetting process works similarly to an inkjet printer. A print-head passes over a bed of NdFeB powder and deposits a polymer binding agent to bind the layer of particles together. The bound powder is then coated with another layer of powder, building the desired shape in successive layers of bonded powder. Upon completion, the green part and surrounding powders are placed in an oven at temperatures between 100°C and 150°C for 4–6 h to cure the binder. After curing, the excess powder can be brushed away to reveal the completed “green” part. Green magnet parts were then infiltrated with a clear urethane resin to achieve the measured density of the magnet of 3.47 g/cm 3 close to 46% relative to the NdFeB single crystal density of 7.6 g/cm 3 . Magnetic measurements indicate that there is no degradation in the magnetic properties. In conclusion, this study provides a new pathway for preparing near-net-shape bonded magnets for various magnetic applications.

36 MATERIALS SCIENCE↗

Low-Field Alignment of Anisotropic Bonded Magnets for Additive Manufacturing of Permanent Magnet Motors

Additive manufacturing techniques for fabricating bonded magnets have the potential to reduce manufacturing cost and time-to-market of products and address the criticality of rare-earth elements (REEs), which is a concern for economic design of dependent applications such as permanent magnet machines. We investigated the magnetic alignment of anisotropic bonded magnet material comprising 65 vol.% Nd-Fe-B in nylon-12 produced by extrusion in a 20-W brushless direct current surface permanent magnet motor for submersible water pump application using finite element analysis. The results predict that sufficient alignment for this application could be obtained at low alignment fields (μoH ≤ 1 T) with a reduction in the volume of critical materials by up to 40% compared with isotropic permanent magnets. Furthermore, this demonstrates the economic feasibility of incorporating a magnetic alignment field source into additive manufacturing systems for bonded magnets, and the potential of aligned anisotropic bonded magnets to address REE criticality.

36 MATERIALS SCIENCE↗