SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Inflatable space antennas are discussed. A brief history of inflatable structures is given. Several antenna configurations are described. The antenna configuration consisting of a thin film cone and parabolic held to the proper shape by internal pressure is discussed in detail.
The cylindrical waves associated with the Sommerfeld solution for a diffracting half-plane are applied in the evaluation of the effects of secondary radiation on the focal-region-fields of paraboloids. A cross-correlation between the computed focal-region-fields and the feed-antenna-fields is then introduced to determine the modified radiation pattern of paraboloidal antennas. The half-plane solution is adapted to estimate the effects of a polygonal fence on 9-meter S-band and 3-meter S- and Ku-band antennas at the Merrit Island, Fl Spacecraft Tracking and Data Network Station.
Reception of the exceedingly small signals from spacecraft typical of deep space communication requires antennas of enormous size, complexity, and precision. The two Voyager spacecraft each have 20-watt X-band transmitters; and at their Saturn encounter distances from Earth of approximately 1.5 billion kilometers, the power density received on the Earth was less than 10 to the minus 19th power watts per square meters. The thrust in deep-space communications improvement was in the areas of ground and spacecraft antenna size and performance increases, spacecraft transmitter power increase, ground receiving system design, and telemetry information coding. Ground antenna theory, design, and performance as related to the particular problem of receiving spacecraft signals using the Deep Space Network (DSN) is described.
The effects of random member length errors on the surface accuracy, the defocus, and the residual, internal loads of tetrahedral truss antenna reflectors have been studied analytically. The analytical procedure involves performing multiple, deterministic finite element structural analyses for a particular truss. For each analysis, the normally distributed, random member length errors are selected by random number generator. A best fit paraboloid analysis is used to determine a root mean square error and defocus from each analysis. The statistical properties of these quantities as well as the internal loads are calculated from the results of many independent analyses. Results indicate that the number of members in a tetrahedral truss antenna of a given diameter has a significant effect on surface accuracy, defocus and internal loads. It was also found that the member axial stiffnesses and antenna focal length have a very small effect on reflector surface accuracy.
A numerical technique is presented to optimize the performance of arbitrary antenna arrays under realistic conditions. An experimental-computational algorithm is formulated in which n-dimensional minimization methods are applied to measured data obtained from the antenna array. A numerical update formula is used to induce partial derivative information without requiring special perturbations of the array parameters. The algorithm provides a new design for the antenna array, and the method proceeds in an iterative fashion. Test case results are presented showing the effectiveness of the algorithm.
It is proposed that for inflatable antenna systems, technology feasibility can be demonstrated and parametric design and scalability (scale factor 10 to 20) can be validated with an experiment using a 16-m-diameter antenna attached to the Shuttle. The antenna configuration consists of a thin film cone and paraboloid held to proper shape by internal pressure and a self-rigidizing torus. The cone and paraboloid would be made using pie-shaped gores with the paraboloid being coated with aluminum to provide reflectivity. The torus would be constructed using an aluminum polyester composite that when inflated would erect to a smooth shell that can withstand loads without internal pressure.
The focused parabolic antenna has far field pattern characteristics in the radiating near field region. Therefore, it can provide fine resolutions in the across range dimensions. The technique of focusing the parabolic antenna is discussed and applied to a 2-1/2 foot parabolic antenna at X-band. The results of the pattern measurements at various ranges from 2.8 m to 5 m are provided.
Solar radiation pressure on the vibrating antenna structure, temperature gradients induced by solar heating, and stabilizing gravity-gradient torques were considered when the linear regulator theory was used to obtain orientation and shape control of a hoop/column antenna system being considered for the land mobile satellite system. A finite element model of the antenna system which includes all six rigid modes and seven flexible modes was used. Results show that the environmental disturbances affect only the rigid modes of the structure. The effect of solar radiation pressure interacting with the vibrating system is smaller than the solar radiation pressure acting on the thermally deformed structure. To reduce control effort in order to maintain shape and orientation, thermal deformations must be minimized in the preliminary design of the system.
The problem of microstrip antennas covered by a dielectric substrate is formulated in terms of coupled integro-differential equations with the current distribution on the conducting patch as an unknown quantity. The Galerkin method is used to solve for the unknown patch current. Using the present formulation, the radiation pattern, the resonant frequency, and the bandwidth of a rectangular microstrip antenna are computed. Design data for a rectangular microstrip antenna are also presented.
The surface panels of the main reflector of the 64-m antenna are initially set at an elevation angle of 45 deg, where most tracking occurs, to ideally match a prescribed praboloid. As the antenna is rotated about the elevation axis, distortions are introduced at the surface panel's supporting nodes as well as at the main reflector backup structure by changes in the direction of the gravity forces relative to the reflector symmetric axis. Major bump displacements could be corrected by controlling the position of the surface panel corners using adjustable mechanical jacks that change in length with the antenna elevation angle. The analysis of two bump-removal configurations is presented and one unique adjustment mechanism is proposed. A gain recovery of 0.2 dB at X-band would be available if the reflector structure distortion rms were reduced from 0.63 mm (0.025 in.) to 0.15 mm (0.006 in.).
Progress in the Antenna Technology Study being performed by NASA to characterize an antenna system with a scaning beam with a half-power beam diameter of around 0.3 deg and a minimum width over which the sidelobes stay below the -30 dB level is reported. Continuous U.S. (CONUS) coverage is desired by the satellite antenna system, with 10-20 fixed beams for trunk coverage and a rapidly scanned narrow beam for customer premises. The design specifies 24 beamwidths from east to west and 10 beamwidths from south to north. Reflector parameters have been identified to optimally focus all beams from a planar feed array. An example of coverage expected with the design demonstrates optimized beams for Seattle, Oklahoma City, and Miami, with -3 dB contours in circles 0,25 deg in diameter and a peak directivity of 55 dB. Experimental work was scheduled for 1983.
The ESSA is a microprocessor-controlled antenna for low orbiting spacecraft for telemetry and command relay through the Tracking and Data Relay Satellite System (TDRSS). The array is a hemispherical shape covered with disk radiating elements. A group of radiating elements are continuously selected by the microprocessor controller to form a beam in the direction of a TDRS. A radial switching power divider uses PIN diodes to select the desired radiating elements. The antenna gain is a function of the size of the hemispherical dome. A 30-inch diameter dome is presently being built for the Earth Radiation Budget Spacecraft (ERBS). Gain of this antenna over a hemisphere is 14 dBi and polarization is lefthand circular. There are 145 radiating elements with 12 being used at one time to form a beam. The ESSA subsystem weights 74 pounds and power consumption is 20 watts. RF power handling capability is 30 watts. The S-Band radiating elements have a 10 percent bandwidth that allows simultaneous transmission and reception.
Additional frequency bands are needed to satisfy requirements related to the rapid growth of satellite communications, and the utilization of the 30/20 GHz frequencies is being considered. The present investigation is concerned with the experimental verification phase of an antenna technology study sponsored by NASA. The feasibility of narrow (0.3 degree) directive beam scanning over the entire continental U.S. (CONUS) from a single antenna at 30/20 GHz is demonstrated. The POC (Proof-of-Concept) model is based on an employment of an offset shaped dual reflector optics. The main reflector and the subreflector are both fabricated from aluminum. Attention is given to feed array and beam-forming network, multiple beam antenna range tests, an analysis, and test results.
A general approach to the optimal control of large space antennas based on their RF/structural characteristics is described. The approach consists of defining a cost functional based on the degradation of the RF performance of the antenna and using the structural model as the dynamic system. The method is applied to the design of an optimal controller for a 55-m, wrap-rib offset-fed antenna. Simulation results show that control energy consumption is reduced to aproximately one third of the energy used to achieve the same RF performance with traditional control strategies.
Amplitude variations over a 12.9 km terrestrial line-of-sight path were measured simultaneously on a 1400 lambda and a 29 lambda antenna at 86.16 GHz. Clear atmosphere data from two occasions with considerably different meteorological conditions are presented. Both sets have statistical and spectral parameters in good agreement with turbulence theory. Some of the data taken after a thunderstorm front passage show a slow gain reduction of the large antenna of up to 2 dB and an increase in variance to a level above that of the small antenna. The power spectral density of these data reveals that the excess fluctuation power is in the region of the spectrum which turbulence theory predicts to be flat. It shows an approximate 1/f dependence. It is attributed to refractive bending of up to 0.025 deg. Gain reductions due to turbulence or turbulence induced angle-of-arrival variations were estimated to be negligible.
The current NASA-sponsored Antenna Technology Development Program of the offset wrap-rib antenna concept is based on a ground test program of 'proof of concept' hardware whose potential on-orbit performance is based on analytical estimates. The ground demonstration hardware represents a partial 55-meter diameter reflector and feed support structure. Testing will include automated deployment, reflector surface quality evaluation and validation of analytical performance models. Test results and hardware fabrication costs will be used to refine the models that will be the basis for the preliminary design of a 100-meter diameter wrap-rib antenna system. Additionally, the design, processes, tooling, fabrication techniques, fixturing and assembly approaches used for the 'proof of concept' hardware are directly applicable to building flight systems up to 100 meters in diameter.
A simple practical method for designing antenna-feed positioning control systems for large deployable spaceborne antenna systems with flexible booms is proposed. The approach is based on the mechanical decoupling of the antenna-feed from the boom so that the positioning control system can be designed without taking boom dynamics into consideration, thus avoiding a complex infinite dimensional control problem. The basic idea is illustrated by a simple angular positional control system attached to a flexible boom restricted to torsional motion only. The application of this approach to more complex situations is discussed briefly.
A method is presented for generating circularly polarized conical patterns from circular microstrip antennas. These antennas are excited at higher order modes and require different feed arrangements for different mode excitations. It is determined that the peak direction of the conical pattern can be varied over a wide angular range. Modal expansion technique is employed to calculate the radiation patterns of these antennas.