SEARCH · Engineering Papers

Results for “Aggregates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Crystallization of a Neptunyl Oxalate Hydrate from Solutions Containing Np V and the Uranyl Peroxide Nanocluster U 60 Ox 30

Uranyl peroxide nanoclusters are an evolving family of materials with potential applications throughout the nuclear fuel cycle. While several studies have investigated their interactions with alkali and alkaline earth metals, no studies have probed their interactions with the actinide elements. This work describes a system containing U 60 Ox 30 , [((UO 2 )(O 2 )) 60 (C 2 O 4 ) 30 ] 60- , and neptunium(V) as a function of neptunium concentration. Ultra-small and small angle X-ray scattering were used to observe these interactions in the aqueous phase, and X-ray diffraction was used to observe solid products. The results show that neptunium induces aggregation of U 60 Ox 30 when the neptunium concentration is ≤ 10 mM, whereas (NpO 2 ) 2 C 2 O 4 ·6H 2 O(cr) and studtite ultimately form at 15–25 mM neptunium. Finally, the latter result suggests that neptunium coordinates with the bridging oxalate ligands in U 60 Ox 30 , leaving metastable uranyl peroxide species in solution, and is an important finding given the potential application of uranyl peroxide nanoclusters in the recycling of used nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Hydrodynamically Controlled Self‐Organization in Mixtures of Active and Passive Colloids

Abstract Active particles are known to exhibit collective behavior and induce structure in a variety of soft‐matter systems. However, many naturally occurring complex fluids are mixtures of active and passive components. The authors examine how activity induces organization in such multi‐component systems. Mixtures of passive colloids and colloidal micromotors are investigated and it is observed that even a small fraction of active particles induces reorganization of the passive components in an intriguing series of phenomena. Experimental observations are combined with large‐scale simulations that explicitly resolve the near‐ and far‐field effects of the hydrodynamic flow and simultaneously accurately treat the fluid–colloid interfaces. It is demonstrated that neither conventional molecular dynamics simulations nor the reduction of hydrodynamic effects to phoretic attractions can explain the observed phenomena, which originate from the flow field that is generated by the active colloids and subsequently modified by the aggregating passive units. These findings not only offer insight into the organization of biological or synthetic active–passive mixtures, but also open avenues to controlling the behavior of passive building blocks by means of small amounts of active particles.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Backbone Stiffness‐Dependent Photoluminescence of Pendant Fluorophores in Organic Nanoparticles

Fluorescent organic nanoparticles (FoNPs) with backbone stiffness‐dependent photoluminescence were synthesized via microemulsion atom transfer radical polymerization (ATRP) of 2‐(2‐bromoisobutyryloxy)ethyl methacrylate (BiBEM), ethylene glycol dimethacrylate (EGDMA), and methacrylate monomers bearing pendant fluorophores, 1‐pyrenemethyl methacrylate (PyMMA), or 4‐(1,2,2‐triphenylethenyl)benzenemethyl methacrylate (TPEMMA). The crosslinking density precisely tuned the intraparticle rigidity, enabling systematic control over emission mechanisms. Pyrene‐containing FoNPs exhibited a rigidity‐dependent transition from excimer‐dominated to monomer‐dominated fluorescence, whereas TPE‐based FoNPs displayed aggregation‐induced emission (AIE) enhancement as intramolecular motion was restricted. Solvent‐dependent studies revealed that increased polarity and viscosity, particularly in benzyl alcohol and DMSO, promoted cooperative rigidification and enhanced emission intensity through specific polymer–solvent interactions. Furthermore, the retained alkyl bromide chain ends on FoNPs enabled dual roles as initiators and crosslinkers in UV‐induced polymerization of poly(ethylene glycol) acrylates, forming luminescent FoNP–OEG hybrid gels with improved mechanical robustness. This work establishes a versatile platform for integrating tunable optical and mechanical properties into a single polymeric nanoparticle framework, offering new design principles for multifunctional soft materials and providing a platform for future sensing, imaging, and photonic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

helixCAM: A platform for programmable cellular assembly in bacteria and human cells

Interactions between cells are indispensable for signaling and creating structure. The ability to direct precise cell-cell interactions would be powerful for engineering tissues, understanding signaling pathways, and directing immune cell targeting. In humans, intercellular interactions are mediated by cell adhesion molecules (CAMs). However, endogenous CAMs are natively expressed by many cells and tend to have cross-reactivity, making them unsuitable for programming specific interactions. Here, we showcase “helixCAM,” a platform for engineering synthetic CAMs by presenting coiled-coil peptides on the cell surface. helixCAMs were able to create specific cell-cell interactions and direct patterned aggregate formation in bacteria and human cells. Based on coiled-coil interaction principles, we built a set of rationally designed helixCAM libraries, which led to the discovery of additional high-performance helixCAM pairs. Finally, we applied this helixCAM toolkit for various multicellular engineering applications, such as spherical layering, adherent cell targeting, and surface patterning.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Discussion on molecular dynamics (MD) simulations of the asphalt materials

The application of asphalt materials in pavement engineering has been increasingly widespread and sophisticated over the past several decades. Variations in the properties of asphalt binder during mixing, transportation, and paving can affect the performance of asphalt pavement. However, the asphalt material is a non-homogeneous and complex organic substance, consisting of various molecules with widely various molecular weights, elemental compositions, and structures. This complexity leads to difficulties for researchers to clearly and immediately understand the properties of asphalt materials and their variations. The multi-scale research approach combines macroscopic experimental data and microscopic simulation results from a practical engineering perspective. It helps to improve the understanding of asphalt materials. The molecular dynamics (MD) simulation proposes a corresponding molecular model of asphalt material based on experimental data, and the simulation algorithm is able to derive properties similar to those of real asphalt. Here, this paper provides a comprehensive review of the current studies on MD simulation of asphalt materials, including modeling, properties, and multi-scale analysis. As a key part of the computational simulation, this paper discusses the typical asphalt binder and asphalt-aggregate interface models constructed by different groups, and also presents their differences from real samples and their feasibility based on fundamental properties. After the introduction of molecular models, the extensive work made by researchers based on molecular models is categorically reviewed and discussed. The strengths and weaknesses of MD simulation methods in the study of asphalt materials are also summarized in order to provide the reader with a more comprehensive understanding of the relevant contents and to guide subsequent research.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Peridynamic modeling of cementitious materials for nuclear waste management

Radioactive and hazardous waste generated from fuel processing plants, nuclear reactors, and hospitals, requires effective management strategies. Cementitious materials are widely applied for these needs, serving as structural materials, reactive barriers, or waste forms. In these applications cracking poses a significant risk to performance, driven by inconsistent shrinkage of the components and the varying strength and permeability of their interfaces. Traditional modeling approaches face challenges in representing the complex fracture behavior of cementitious materials due to the reliance on spatial derivatives and difficulties with mesh generation. Here, to overcome these limitations, we employ peridynamics, a novel continuum mechanics formulation that uses integrals to describe mechanical equilibrium, avoiding discontinuities associated with traditional methods. Through incorporation of a bi-linear softening model and quasistatics, an experimentally validated model for Portland cement concrete samples was created. Mechanical parameters, including compressive strength and elastic modulus were validated and variation due to aggregate packing was evaluated. Additionally, sensitivity analysis of the peridynamic parameters to the bulk material properties was established. The results lay the groundwork for evaluating the impact of unique conditions of cementitious waste forms that can be assessed to improve the reliability of waste management strategies.

Aggregates↗

DOE OSTI2020

Influence of mineralogical and chemical compositions on alkali-silica-reaction of Tennessee limestones

The paper aims to identify potential correlations between mineralogical and chemical compositions of AAR reactive dolomitic limestone aggregates from Tennessee and their expansion on ASTM C1293 for quick evaluation of reactivity. The chemical compositions of 26 limestones, namely the silica content (SiO 2 ), showed a strong correlation with the expansion in the concrete prism test. The early and highly expansive limestones are characterized by a high clay/ mica content (>5%). The reactivity of Tennessee limestones is mainly caused by crypto/microcrystalline quartz, chert, and finely disseminated silica in carbonate and clay/mica matrices, and it can be reasonably evaluated using X-ray diffraction and chemical analysis coupled with petrographic examinations.

36 MATERIALS SCIENCE↗

DOE OSTI2023

A Fine-grained Asynchronous Bulk Synchronous parallelism model for PGAS applications

The Partitioned Global Address Space (PGAS) model is well suited for executing irregular applications on cluster-based systems, due to its efficient support for short, one-sided messages. Separately, the actor model has been gaining popularity as a productive asynchronous message-passing approach for distributed objects in enterprise and cloud computing platforms, typically implemented in languages such as Erlang, Scala or Rust. To the best of our knowledge, there has been no past work on using the actor model to deliver both productivity and scalability to irregular PGAS applications with large number of small messages. In this paper, we introduce a new programming system for PGAS applications, in which point-to-point remote operations can be expressed as fine-grained asynchronous actor messages. In our approach, the programmer does not need to worry about programming complexities related to message aggregation and termination detection. Our approach can be viewed as extending the classical Bulk Synchronous Parallelism model with fine-grained asynchronous communications within a phase or superstep. Here, we believe that our approach offers a desirable point in the productivity-performance space for PGAS applications, with more scalable performance and higher productivity relative to past approaches. Specifically, for seven irregular mini-applications from the Bale Kernels and three graph kernels executed using 2048 cores in the NERSC Cori system, our approach shows geometric mean performance improvements of ≥ 20X relative to standard PGAS versions (UPC and OpenSHMEM) while maintaining comparable productivity to those versions.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Enhanced hindrance from phenyl outer side chains on nonfullerene acceptor enables unprecedented simultaneous enhancement in organic solar cell performances with 16.7% efficiency

Inner side-chain engineering on Y6 has been a proven successful in improving short-circuit current density (JSC) through fine-tuning aggregated structures of acceptors. However, it fails in tuning the lowest unoccupied molecular orbital level (LUMO) and open-circuit voltage (V OC ). In this paper, we turn to focus on engineering the outer side chains on the flanking thienothiophene units with 4-hexylphenyl (PhC6) and 6-phenylhexyl (C6Ph) chains. Use of PhC6 enhances the steric effect between the attached phenyl and the ending group, which in combination with the additional conjugation effect provided by the linking phenyl leads to upshifted energy levels and increased V OC as a result. Again, substitution with the bulkier PhC6 unprecedentedly improves film-morphology with reduced paracrystalline disorder and long period and increased root-mean-square composition variations as well, leading to increased electron and hole mobilities and suppressed monomolecular recombination with J SC and fill-factor (FF) simultaneously enhanced. The PM6:BTP-PhC6-based devices yield a higher efficiency value of 16.7% than the PM6:BTP-C6Ph-based one (15.5%). Furthermore, this study shows a conceptual advance in materials design towards reducing the conflict between V OC and J SC in binary blended organic solar cells, which can be achieved by introducing bulkier chains to twist the backbone and simultaneously enhance the packing order.

14 SOLAR ENERGY↗

DOE OSTI2023

Minimal Impacts of Microplastics on Soil Physical Properties under Environmentally Relevant Concentrations

Agricultural soils are a major reservoir of microplastics, and concerns have arisen about the impacts of microplastics on soil properties and functioning. In this report we measured the physical properties of a silt loam in response to the incorporation of polyester fibers and polypropylene granules over a wide range of concentrations. We further elucidated the underlying mechanisms through determining the role of microplastic shape and the baseline effects from the amendment of soil particles. The incorporation of microplastics into soil tended to increase contact angle and saturated hydraulic conductivity, decrease bulk density and water holding capacity, while did not affect aggregate stability. Polyester fibers affected soil physical properties more profoundly than polypropylene granules, due to the vastly different shape of fibers from that of soil particles. However, changes in soil properties were gradual, and significant changes did not occur until a high concentration of microplastics was reached (i.e., 0.5% w/w for polyester fibers and 2% w/w for polypropylene granules). Currently, microplastic concentrations in soils not heavily polluted with plastics are far below these concentrations, and results from this study suggest that microplastics at environmentally relevant concentrations have no significant effects on soil physical properties.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Three Distinctive Steps for Heterogeneous Nucleation of Tunnel-Structured Mn Oxide on Quartz under Light Exposure

Natural manganese (Mn) oxide coatings, resulting from the heterogeneous nucleation on foreign substances, have garnered interest based on their importance in the reaction with organic substances and in environmental systems. However, the heterogeneous nucleation of the natural Mn oxide coatings still remains elusive. Here, via fast photochemical oxidation of Mn 2+ (aq), we show that Mn(IV) oxide nuclei form and aggregate on quartz in three distinct successive stages: (i) a nanocrystalline film of unaligned grain forms, (ii) nanoislands develop on the film, and (iii) nanorods form on the nanoislands. Each stage has different crystalline structures and forms by aligned attachment of nanoscale precursors on the preceding surface. Crystal lattice analyses confirm the crystalline development, from the short-range order of the Mn oxide film to the long-range order of the nanorods. Also, the heterogeneous nucleation observed in this work produced groutellite-like tunnel structures of Mn oxide on quartz. Furthermore, this revealed pathway of the heterogeneous nucleation can offer a new perspective on the variety of poorly crystalline structures of natural Mn oxides found in the environment, which can affect elemental redox cycles, contaminant sequestration and removal, and soil carbon storage.

Aligned attachment↗

DOE OSTI2020

Hydrogen-Bond-Driven Chemical Separations: Elucidating the Interfacial Steps of Self-Assembly in Solvent Extraction

Chemical separations, particularly liquid extractions, are pervasive in academic and industrial laboratories, yet a mechanistic understanding of the events governing their function are obscured by interfacial phenomena that are notoriously difficult to measure. In this work, we investigate the fundamental steps of ligand self-assembly as driven by changes in the interfacial H-bonding network using vibrational sum frequency generation. Our results show how the bulk pH modulates the interfacial structure of extractants at the buried oil/aqueous interface via the formation of unique H-bonding networks that order and bridge ligands to produce self-assembled aggregates. These extended H-bonded structures are key to the subsequent extraction of Co2+ from the aqueous phase in promoting micelle formation and subsequent ejection of the said micelle into the oil phase. The combination of static and time-resolved measurements reveals the events underlying complexities of liquid extractions at high [Co2+]:[ligand] ratios by showing an evolution of interfacially assembled structures that are readily tuned on a chemical basis by altering the compositions of the aqueous phase. The results of this work point to new principles to design-applied separations through the manipulation of surface charge, electrostatic screening, and the associated H-bonding networks that arise at the interface to facilitate organization and subsequent extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Inhibition of Chromium(III) Oxidation through Manganese(IV) Oxide Passivation and Iron(II) Abiotic Reduction

Manganese (Mn) oxides are strong oxidants that are ubiquitous in soils and can oxidize redox-active metals, including chromium (Cr). In soil environments, trivalent chromium (Cr(III)) is a benign, immobile micronutrient, whereas the hexavalent Cr(VI) form is present as a highly mobile, toxic chromate oxyanion. Although many studies have characterized the capacity of Mn(III/IV) oxides to oxidize Cr(III) to toxic Cr(VI), the oxidative capacity of Mn oxides in the presence of potentially passivating soil constituents, specifically reduced soluble iron (Fe(II) aq ), remains unresolved. We hypothesized that chemical processes at redox interfaces, such as diffusion-limited environments within soil aggregates, can lead to decreased Cr(VI) production from Mn oxide-driven oxidation due to passivation by Fe(II) aq . A multichamber diffusion-limited reactor was used to simulate transport at soil redox interfaces and investigate the capacity of poorly crystalline and crystalline Mn oxides to oxidize solid Cr(III) minerals to Cr(VI) in the presence of Fe(II) aq . As predicted, Cr(VI) was produced through the Mn oxide-catalyzed oxidation of Cr(III) at a rate controlled by the solubility of Cr(OH) 3 . However, in the presence of Fe(II) aq , the concentration of aqueous Cr(VI) decreased as a function of the Fe(II) aq concentration, where high concentrations of Fe(II) aq completely inhibited Cr(VI) production, likely through both the passivation of the Mn oxide and the direct reduction of Cr(VI) by Fe(II). At both low (14 μM) and high (100 μM) Fe(II) aq concentrations, the iron oxide minerals hematite (Fe 2 O 3 ) and goethite (α-FeOOH) were associated with the Mn oxides, which can cause surface passivation, a likely role that decreases Cr(III) oxidation. Additionally, the Cr(III) oxidation rate decreased with increasing crystallinity of the Mn oxides whether or not Fe(II) was present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Why Does Oriented Attachment Produce Low-Dimensional Structures?

Oriented attachment is a nonclassical crystal growth mechanism that frequently leads to the formation of low-dimensional nanocrystals, such as nanowires or nanoplates, as well as intricately branched nanocrystals. This chapter discusses several experimentally observed instances of such structures, as well as theoretical efforts to understand them. Recent molecular-dynamics simulation studies in our group aimed at understanding how oriented attachment could promote the aggregation of Ag nanoplates to produce two-dimensional sheets are highlighted. Here, the mechanism found in this study may extend to other systems for which lowdimensional crystal growth occurs.

36 MATERIALS SCIENCE↗

DOE OSTI2022

What Determines the Number and the Timing of Pulses in Afternoon Precipitation in the Green Ocean Amazon (GoAmazon) Observations?

Using GoAmazon observations over the central Amazon, we investigate double-pulse events of afternoon precipitation for the first time. Relative humidity is the dominant factor in determining the onset timing and the number of pulses of precipitation. A moister free troposphere on single-pulse days features heavy precipitation in the early afternoon, which stabilizes the atmosphere and prohibits further convection. On early–onset double-pulse days, weaker precipitation from shallower convection in the first pulse leads to less consumption of atmospheric instability, making the environment favorable for a second pulse of stronger precipitation. A cluster tracking algorithm using the scanning radar reflectivity is developed to examine the relationship between precipitation pulses. Through explicitly tracking convective clusters that exist from the first to the second pulse, convective aggregation plays a more dominant role to the survival of clusters with larger final size, and on average around 20% of cluster survivals are due to natural growth.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Computational study of inertial migration of prolate particles in a straight rectangular channel

Inertial migration of spherical particles has been investigated extensively using experiments, theory, and computational modeling. Yet, a systematic investigation of the effect of particle shape on inertial migration is still lacking. Herein, we numerically mapped the migration dynamics of a prolate particle in a straight rectangular microchannel using smoothed particle hydrodynamics at moderate Reynolds number flows. After validation, we applied our model to 2:1 and 3:1 shape aspect ratio particles at multiple confinement ratios. Their effects on the final focusing position, rotational behavior, and transitional dynamics were studied. In addition to the commonly reported tumbling motion, for the first time, we identified a new logrolling behavior of a prolate ellipsoidal particle in the confined channel. This new behavior occurs when the confinement ratio is above an approximate threshold value of K = 0.72. Our microfluidic experiments using cell aggregates with similar shape aspect ratio and confinement ratio confirmed this new predicted logrolling motion. In this study, we also found that the same particle can undergo different rotational modes, including kayaking behavior, depending on its initial cross-sectional position and orientation. Furthermore, we examined the migration speed, angular velocity, and rotation period as well as their dependence on both particle shape aspect ratio and confinement ratio. Our findings are especially relevant to the applications where particle shape and alignment are used for sorting and analysis, such as the use of barcoded particles for biochemical assays through optical reading, or the shape-based enrichment of microalgae, bacteria, and chromosomes.

42 ENGINEERING↗

DOE OSTI2023

Kohn–Sham accuracy from orbital-free density functional theory via Δ-machine learning

Here, we present a Δ-machine learning model for obtaining Kohn–Sham accuracy from orbital-free density functional theory (DFT) calculations. In particular, we employ a machine-learned force field (MLFF) scheme based on the kernel method to capture the difference between Kohn–Sham and orbital-free DFT energies/forces. We implement this model in the context of on-the-fly molecular dynamics simulations and study its accuracy, performance, and sensitivity to parameters for representative systems. We find that the formalism not only improves the accuracy of Thomas–Fermi–von Weizsäcker orbital-free energies and forces by more than two orders of magnitude but is also more accurate than MLFFs based solely on Kohn–Sham DFT while being more efficient and less sensitive to model parameters. We apply the framework to study the structure of molten Al 0.88 Si 0.12 , the results suggesting no aggregation of Si atoms, in agreement with a previous Kohn–Sham study performed at an order of magnitude smaller length and time scales.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Implementation of a Frenkel exciton-based controlled phase shifter

Frenkel excitons are of interest for ultrafast switching applications due to the femtosecond timescale at which coherent exciton transfer between chromophores takes place. The Frenkel Hamiltonian, which governs the dynamics of Frenkel excitons, belongs to a class of Hamiltonians that enable universal quantum computation. It is thus of interest to determine how a complete set of exciton-based gates for quantum computing could be constructed as aggregates of chromophores. Here, we demonstrate that a controlled phase shifter can be constructed as a pair of exciton transmission lines that employ two types of chromophores and that are cross coupled by a two-exciton interaction. This element facilitates the construction of controlled basis-change gates, thereby enabling the implementation of a complete set of exciton-based gates for universal quantum computation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗