Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AGGLOMERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Spreading and Solidification of Hollow Molten Droplet under Its Impact onto Substrate: Computer Simulation and Experiment

The peculiarities of plasma treatment of agglomerated (spray dry) YSZ powder and subsequent plasma spraying of produced HOSP powder (consisting of the hollow spherical particles) are analyzed. Formation of splats of hollow YSZ droplets deserves a special attention within thermal spraying. In this case, immediately prior to particle--substrate collision, we have a droplet that consists of a liquid shell enclosing a gas cavity heated to a temperature close to the melt temperature. The paper presented includes the results of computer simulation and model experiments carried out under full control of the key physical parameters: temperature, velocity, external diameter of droplet, thickness of its shell, and temperature of polished substrate. It was shown that formation of splats of hollow droplets proceeds in a manner more stable compared to the case of 'dense' molten particles obtained from fused and crushed compacts, and this provides superior coating-substrate interface.

36 MATERIALS SCIENCE↗

The In-flow Capture of Superparamagnetic Nanoparticles for Targeting of Gene Therapeutics

Superparamagnetic magnetite nanoparticles have been synthesised and used for in-flow capture experiments in vitro to provide a better understanding of the physical principles that underlie magnetic directed therapy. Experimental observations and modeling work have enabled initial refinement of magnetic targeting strategies and superparamagnetic nanoparticle properties for different therapeutic targeting requirements. It has been discovered that 330 nm and 580 nm agglomerates of 10 nm magnetite cores can be captured with a 0.5 T magnet in flows of up to 0.35 mlmin{sup -1} in 410 {mu}m diameter microcapillaries. These flows are typical of blood flow rates found in venules and arterioles in the human cardiovascular system. Further analysis of the data obtained from in-flow capture of superparamagnetic nanoparticles has enabled an initial model to be created, which can be used to estimate the steady state layer thickness of captured superparamagnetic nanoparticles and therefore capillary occlusion at the target site. This work provides the basis for future optimisation of a completely in vitro system for testing magnetic directed therapy, enabling data to be provided for preclinical trials.

36 MATERIALS SCIENCE↗

Particle shape effects on thermo-physical properties of alumina nanofluids.

The thermal conductivity and viscosity of various shapes of alumina nanoparticles in a fluid consisting of equal volumes of ethylene glycol and water were investigated. Experimental data were analyzed and accompanied by theoretical modeling. Enhancements in the effective thermal conductivities due to particle shape effects expected from Hamilton-Crosser equation are strongly diminished by interfacial effects proportional to the total surface area of nanoparticles. On the other hand, the presence of nanoparticles and small volume fractions of agglomerates with high aspect ratios strongly increases viscosity of suspensions due to structural constrains. Nanoparticle surface charge also plays an important role in viscosity. It is demonstrated that by adjusting pH of nanofluid, it is possible to reduce viscosity of alumina nanofluid without significantly affecting thermal conductivity. Efficiency of nanofluids (ratio of thermal conductivity and viscosity increase) for real-life cooling applications is evaluated in both the laminar and turbulent flow regimes using the experimental values of thermal conductivity and viscosity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of crystalline Si quantum dots by millisecond laser irradiation of SiO{sub x}N{sub y} layers

We demonstrated that the timescale for Si quantum dot (Si-QD) formation in a SiO{sub x}N{sub y} layer is a few milliseconds by IR laser irradiation. The amount of Si agglomerated into QD in a laser irradiated SiO{sub x}N{sub y} layer is comparable to that calculated after furnace annealing at 1250 deg. C for 30 min. However, we found that crystalline Si-QD can be formed by laser only if the amount of Si atoms in excess is as high as 1x10{sup 22}/cm{sup 3}. The Si-QD contains impurities like N and O that prevent luminescence at 900 nm. The photoluminescence (PL) signal is recorded only after an additional annealing after laser irradiation at temperatures above 1000 deg. C when diffusion-assisted replacement of N and O occurs.

36 MATERIALS SCIENCE↗

Irreversible altering of crystalline phase of phase-change Ge-Sb thin films

The stability of the crystalline phase of binary phase-change Ge{sub x}Sb{sub 1-x} films is investigated over a wide range of Ge content. From Raman spectroscopy we find the Ge-Sb crystalline structure irreversibly altered after exposure to a laser beam. We show that with increasing beam intensity/temperature Ge agglomerates and precipitates out in the amount growing with x. A simple empirical relation links Ge precipitation temperature T{sub Ge}{sup p} to the rate of change dT{sub cryst}/dx of crystallization, with the precipitation easiest on the mid-range x plateau, where T{sub cryst} is nearly constant. Our findings point to a preferable 15% < or approx. x < 50% window, that may achieve the desired cycling/archival properties of a phase-change cell.

36 MATERIALS SCIENCE↗

Development of polypropylene/wood flour ecocomposites. Evaluation of silane as coupling agent

The effects of Pinus Sylvestris wood flour as filler in polypropylene matrix was evaluated. The mechanical properties and the morphology of different wood flour/polypropylene composites (WPC) were studied. The composites materials were prepared with several amounts of wood flour from 10 to 30% wt. Mechanical properties show that the wood flour incorporation increases the rigidity of the composites. Morphological analysis indicates that agglomerates are formed, with amounts exceeding 30% of wood flour. For the silane--treated composites, the dispersion of the filler into the polypropylene (PP) matrix improved. Shore D hardness of the composites is decreased with the addition of the coupling agent.

36 MATERIALS SCIENCE↗

Effect of laser parameters and assist gas on spectral response of silicon fibrous nanostructure

This article report, for the first time, the influence of laser parameters on the spectral response of weblike silicon fibrous nanostructures. These nanostructures are formed by femtosecond laser irradiation at megahertz pulse frequency under atmosphere and nitrogen ambient. The observed decreasing in reflectance is correlated with the density of fibrous nanostructures and the size of the agglomerated nanoparticles. Compared to bulk silicon, Raman spectra of fibrous nanostructures shows a downward shift and asymmetric broadening at the first order phonon peak. The shift and broadening are attributed to phonon confinement of fibrous nanostructure. Polarization and nitrogen gas modify the morphology of generated nanomaterials but does not have effect on light absorptance. Pulsewidth and pulse frequency do not have significant effect on light absorptance.

36 MATERIALS SCIENCE↗

Formation of epitaxial metastable NiGe{sub 2} thin film on Ge(100) by pulsed excimer laser anneal

Epitaxial nickel digermanide (NiGe{sub 2}), a metastable phase, was formed by laser annealing Ni on (100) germanium-on-silicon substrates. The NiGe{sub 2} formation was investigated using transmission electron microscopy, energy dispersive x-ray spectroscopy, x-ray diffraction, Rutherford backscattering spectroscopy, and first-principles calculations. The formation mechanism of NiGe{sub 2} is discussed and is attributed to both the reduced interfacial energy at the NiGe{sub 2}/Ge(100) interface and the kinetic aspects of the laser annealing reaction associated with phase transformation and film agglomeration.

36 MATERIALS SCIENCE↗

Influence of the Sediment Properties of Al{sub 2}O{sub 3{center_dot}}xH{sub 2O} on the Hydrothermal Formation AlOOH Whiskers

Boehmite ({gamma}-AlOOH) whiskers were prepared via the co-precipitation of the hydrated alumina (Al{sub 2}O{sub 3{center_dot}}xH{sub 2}O,x = 4.2-5.6) precursor at room temperature followed by hydrothermal treatment of the precursor slurry at elevated temperature. With the isoelectric pH of 7.9, the precursors formed at pH<6 was dispersive and stable, whereas the precursors formed at pH 7-9 were agglomerated and easy to be deposited. The partial removal of NO{sub 3}{sup -} from the precursor slurry favored the hydrothermal growth of the {gamma}-AlOOH whiskers. Dispersive {gamma}-AlOOH whiskers with a length of 500-1500 nm, a diameter of 20-40 nm and an aspect ratio of 16-50 were synthesized by hydrothermal treatment of the Al{sub 2}O{sub 3{center_dot}}5.6H{sub 2}O slurry at 220 deg. C for 6.0 h.

36 MATERIALS SCIENCE↗

Nonlinear Behavior of Magnetic Fluid in Brownian Relaxation

This study investigated the nonlinear behavior of magnetic fluids under high excitation fields due to nonlinear Brownian relaxation. As a direct indication of nonlinear behavior, we characterized the higher harmonics of the magnetization signal generated by the magnetic fluid. The amplitudes of the fundamental to the ninth harmonic of the magnetization signal were measured as a function of the external field. The experimental results were compared with numerical simulations based on the Fokker-Planck equation, which describes nonlinear Brownian relaxation. To allow a quantitative comparison, we estimated the size distribution and size dependence of the magnetic moment in the sample. In the present magnetic fluid, composed of agglomerates of Fe{sub 3}O{sub 4} particles, the magnetic moment was estimated to be roughly proportional to the diameter of the particles, in contrast to the case of single-domain particles. When the size distribution and the size dependence of the magnetic moment were taken into account, there was good quantitative agreement between the experiment and simulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of an electrostatic dust removal system with potential application in next-step fusion devices

The ability to manage inventories of carbon, tritium, and high-Z elements in fusion plasmas depends on means for effective dust removal. A dust conveyor, based on a moving electrostatic potential well, was tested with particles of tungsten, carbon, glass, and sand. A digital microscope imaged a representative portion of the conveyor, and dust particle size and volume distributions were derived before and after operation. About 10 mm{sup 3} volume of carbon and tungsten particles were moved in under 5 s. The highest driving amplitude tested of 3 kV was the most effective. The optimal driving frequency was 210 Hz (maximum tested) for tungsten particles, decreasing to below 60 Hz for the larger sand particles. Measurements of particle size and volume distributions after 10 and 100 cycles show the breaking apart of agglomerated carbon and the change in particle distribution over short timescales (<1 s).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Field-structured magnetic platelets as a route to improved thermal interface materials

The development of high-performance thermal interface materials (TIMs) is crucial to enabling future generations of microelectronics because the TIM is usually the limiting thermal resistance in the heat removal path. Typical TIMs achieve modest thermal conductivities by including large volume fractions of randomly-dispersed, highly-conductive, spherical particles in a polymer resin. This paper explores field-structured magnetic platelet composites as a new approach to more effective TIMs. The motivation for this approach is rooted in shape functional theory, which shows that when the particle material has a significantly higher thermal conductivity than that of the polymer, the particle shape and orientation are the factors that limit conductivity enhancement. Oriented platelets are highly effective for heat transfer and if these are magnetic, then magnetic fields can be used to both orient and agglomerate these into structures that efficiently direct heat flow. Here, we show that such field-structured composites have a thermal conductivity anisotropy of ~3, and at the highest particle loading of 16 vol.% we have achieved a 23-fold conductivity enhancement, which is 3-times larger than that achieved in unstructured platelet composites and 8-times greater than unstructured spherical particle composites.

36 MATERIALS SCIENCE↗

Dielectric relaxation study of amorphous TiTaO thin films in a large operating temperature range

Two relaxation processes have been identified in amorphous TiTaO thin films deposited by reactive magnetron sputtering. The parallel angle resolved x-ray photoelectron spectroscopy and field emission scanning electron microscopy analyses have shown that this material is composed of an agglomerates mixture of TiO{sub 2}, Ta{sub 2}O{sub 5}, and Ti-Ta bonds. The first relaxation process appears at low temperature with activation energy of about 0.26 eV and is related to the first ionisation of oxygen vacancies and/or the reduction of Ti{sup 4+} to Ti{sup 3+}. The second relaxation process occurs at high temperature with activation energy of 0.95 eV. This last peak is associated to the diffusion of the doubly ionized oxygen vacancies V{sub O}e. The dispersion phenomena observed at high temperature can be attributed to the development of complex defect such as (V{sub O}e - 2Ti{sup 3+}).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of laser energy fluence on the onset and growth of the Rayleigh-Taylor instabilities and its influence on the topography of the Fe thin film grown in pulsed laser deposition facility

The effect of laser energy fluence on the onset and growth of Rayleigh-Taylor (RT) instabilities in laser induced Fe plasma is investigated using time-resolved fast gated imaging. The snow plow and shock wave models are fitted to the experimental results and used to estimate the ablation parameters and the density of gas atoms that interact with the ablated species. It is observed that RT instability develops during the interface deceleration stage and grows for a considerable time for higher laser energy fluence. The effects of RT instabilities formation on the surface topography of the Fe thin films grown in pulsed laser deposition system are investigated (i) using different laser energy fluences for the same wavelength of laser radiation and (ii) using different laser wavelengths keeping the energy fluence fixed. It is concluded that the deposition achieved under turbulent condition leads to less smooth deposition surfaces with bigger sized particle agglomerates or network.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ag{sup +12} ion induced modifications of structural and optical properties of ZnO-PMMA nanocomposite films

The influence of swift heavy ion (SHI) irradiation on structural and photoluminescence (PL) properties of ZnO-PMMA nanocomposite films, prepared by solution casting method, was studied. The ZnO-PMMA nanocomposite films were irradiated using 120 MeV Ag{sup +12} ions at different fluences varying from 1 Multiplication-Sign 10{sup 11} to 1 Multiplication-Sign 10{sup 13} ions/cm{sup 2}. The intensity of the X-ray diffraction peaks is increased at the high fluence, without evolution of any new peak. A shift in absorption edge (i.e. shift in optical band gap) towards higher wavelength was observed after irradiation and PL from ZnO-PMMA nanocomposite films is found to increase up to a critical fluence and then found to be suppressed for higher fluence (1 Multiplication-Sign 10{sup 12} ion/cm{sup 2}). The change in photoluminescence after irradiation can be attributed to the change in microstructure of PMMA matrix as well as the agglomeration of ZnO nanoparticles.

36 MATERIALS SCIENCE↗

Study of de-watering from the gelatinous precipitate formed during co-precipitation of Nd-YAG powder

Neodymium doped Yttrium Aluminium Garnet (Nd:YAG) ceramics have been synthesised using coprecipitation technique and high temperature vacuum sintering. Gelatinous like precipitates were obtained when precursors of Nd, Al and Yb-nitrate solutions are co-precipitated using ammonia co-precipitant. De-watering from the gelatinous like precipitates is a big challenge and it possesses difficulty in filtration. Evaporation of water by heating resulted in strong agglomerated powder. Different agents were used to ease the filtration process, which is correlated with the phase in the calcined powder.

36 MATERIALS SCIENCE↗

Influence of electron injection into 27 cm audio plasma cell on the plasma diagnostics

In this article, the plasma is created in a Pyrex tube (L = 27 cm, φ= 4 cm) as a single cell, by a capacitive audio frequency (AF) discharge (f = 10–100 kHz), at a definite pressure of ∼0.2 Torr. A couple of tube linear and deviating arrangements show plasma characteristic conformity. The applied AF plasma and the injection of electrons into two gas mediums Ar and N{sub 2} revealed the increase of electron density at distinct tube regions by one order to attain 10{sup 13}/cm{sup 3}. The electrons temperature and density strengths are in contrast to each other. While their distributions differ along the plasma tube length, they show a decaying sinusoidal shape where their peaks position varies by the gas type. The electrons injection moderates electron temperature and expands their density. The later highest peak holds for the N{sub 2} gas, at electrons injection it changes to hold for the Ar. The sinusoidal decaying density behavior generates electric fields depending on the gas used and independent of tube geometry. The effect of the injected electrons performs a responsive impact on electrons density not attributed to the gas discharge. Analytical tools investigate the interaction of the plasma, the discharge current, and the gas used on the electrodes. It points to the emigration of atoms from each one but for greater majority they behave to a preferred direction. Meanwhile, only in the linear regime, small percentage of atoms still moves in reverse direction. Traces of gas atoms revealed on both electrodes due to sheath regions denote lack of their participation in the discharge current. In addition, atoms travel from one electrode to the other by overcoming the sheaths regions occurring transportation of particles agglomeration from one electrode to the other. The electrons injection has contributed to increase the plasma electron density peaks. These electrons populations have raised the generated electrostatic fields assisting the elemental ions emigration to a preferred electrode direction. Regardless of plasma electrodes positions and plasma shape, ions can be departed from one electrode to deposit on the other one. In consequence, as an application the AF plasma type can enhance the metal deposition from one electrode to the other.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Integrated ultrasonic particle positioning and low excitation light fluorescence imaging

A compact hybrid system has been developed to position and detect fluorescent micro-particles by combining a Single Photon Avalanche Diode (SPAD) imager with an acoustic manipulator. The detector comprises a SPAD array, light-emitting diode (LED), lenses, and optical filters. The acoustic device is formed of multiple transducers surrounding an octagonal cavity. By stimulating pairs of transducers simultaneously, an acoustic landscape is created causing fluorescent micro-particles to agglomerate into lines. The fluorescent pattern is excited by a low power LED and detected by the SPAD imager. Our technique combines particle manipulation and visualization in a compact, low power, portable setup.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗