Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “7”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Satellite-Surface Perspectives of Air Quality and Aerosol-Cloud Effects on the Environment: An Overview of 7-SEAS BASELInE

The objectives of 7-SEASBASELInE (Seven SouthEast Asian Studies Biomass-burning Aerosols and Stratocumulus Environment: Lifecycles and Interactions Experiment) campaigns in spring 2013-2015 were to synergize measurements from uniquely distributed ground-based networks (e.g., AERONET (AErosol RObotic NETwork)), MPLNET ( NASA Micro-Pulse Lidar Network)) and sophisticated platforms (e.g.,SMARTLabs (Surface-based Mobile Atmospheric Research and Testbed Laboratories), regional contributing instruments), along with satellite observations retrievals and regional atmospheric transport chemical models to establish a critically needed database, and to advance our understanding of biomass-burning aerosols and trace gases in Southeast Asia (SEA). We present a satellite-surface perspective of 7-SEASBASELInE and highlight scientific findings concerning: (1) regional meteorology of moisture fields conducive to the production and maintenance of low-level stratiform clouds over land; (2) atmospheric composition in a biomass-burning environment, particularly tracers-markers to serve as important indicators for assessing the state and evolution of atmospheric constituents; (3) applications of remote sensing to air quality and impact on radiative energetics, examining the effect of diurnal variability of boundary-layer height on aerosol loading; (4) aerosol hygroscopicity and ground-based cloud radar measurements in aerosol-cloud processes by advanced cloud ensemble models; and (5) implications of air quality, in terms of toxicity of nanoparticles and trace gases, to human health. This volume is the third 7-SEAS special issue (after Atmospheric Research, vol. 122, 2013; and Atmospheric Environment, vol. 78, 2013) and includes 27 papers published, with emphasis on air quality and aerosol-cloud effects on the environment. BASELInE observations of stratiform clouds over SEA are unique, such clouds are embedded in a heavy aerosol-laden environment and feature characteristically greater stability over land than over ocean, with minimal radar surface clutter at a high vertical spatial resolution. To facilitate an improved understanding of regional aerosol-cloud effects, we envision that future BASELInE-like measurement modeling needs fall into two categories: (1) efficient yet critical in-situ profiling of the boundary layer for validating remote-sensing retrievals and for initializing regional transport chemical and cloud ensemble models; and (2) fully utilizing the high observing frequencies of geostationary satellites for resolving the diurnal cycle of the boundary layerheight as it affects the loading of biomass-burning aerosols, air quality and radiative energetics.

AERONET↗

Tuning Fermi Levels in Intrinsic Antiferromagnetic Topological Insulators MnBi 2 Te 4 and MnBi 4 Te 7 by Defect Engineering and Chemical Doping

MnBi 2 Te 4 and MnBi 4 Te 7 are intrinsic antiferromagnetic topological insulators, offering a promising materials platform for realizing exotic topological quantum states. However, high densities of intrinsic defects in these materials not only cause bulk metallic conductivity, preventing the measurement of quantum transport in surface states, but may also affect magnetism and topological properties. In this paper, systematic density functional theory calculations reveal specific material chemistry and growth conditions that determine the defect formation and dopant incorporation in MnBi 2 Te 4 and MnBi 4 Te 7 . The large strain induced by the internal heterostructure promotes the formation of large-size-mismatched antisite defects and substitutional dopants. The results here show that the abundance of antisite defects is responsible for the observed n-type metallic conductivity. Additionally, a Te-rich growth condition is predicted to reduce the bulk free electron density, which is confirmed by experimental synthesis and transport measurements in MnBi 2 Te 4 . Furthermore, Na doping is proposed to be an effective acceptor dopant to pin the Fermi level within the bulk band gap to enable the observation of surface quantum transport. The defect engineering and doping strategies proposed here should stimulate further studies for improving synthesis and for manipulating magnetic and topological properties in MnBi 2 Te 4 , MnBi 4 Te 7 , and related magnetic topological insulators.

36 MATERIALS SCIENCE↗

Bulk‐Boundary Correspondence of Semimetal Ru 3 Sn 7 and Topological Surface States on Chemically Realistic Terminations

Ru 3 Sn 7 is experimentally demonstrated as an efficient catalyst, with potential utilization of topological surface states for hydrogen evolution reaction. Despite its promising catalytic performance, the topological nature of Ru 3 Sn 7 remains uncertain. Particularly, the bulk-boundary correspondence has not yet been established, hence hindering a rigorous justification of its topologically-protected surface states. In this work, the bulk topology of Ru 3 Sn 7 is detailed using first-principles calculations and the topological quantum chemistry formalism. Ru3Sn7 turns out to be an enforced semimetal possessing symmetry-protected crossings within a set of bands near the Fermi level, which are enforced and prescribed by the violations of symmetry-prescribed compatibility relations. Moreover, the surface states and the associated origin from the same set of entangled bands are identified, thereby establishing the bulk-boundary correspondence. To evaluate the effects of chemical modifications, the response of topological surface states to various surface terminations, stoichiometry, and oxidation is examined. The surface structures are globally optimized, and the phase diagrams for various experimental conditions are built. It is shown that, due to changes in the local chemical environment, the original surface states are significantly altered. Modified surface bands can be observed near the Fermi level on surface terminations that preserve the C 4v symmetry.

36 MATERIALS SCIENCE↗

Fast Proton Insertion in Layered H 2 W 2 O 7 via Selective Etching of an Aurivillius Phase

H 2 W 2 O 7 , a metastable material synthesized via selective etching of the Aurivillius-related Bi 2 W 2 O 9 , is shown as an electrode for high power proton-based energy storage. Comprehensive structural characterization is performed to obtain a high-fidelity crystal structure of H 2 W 2 O 7 using an iterative approach that combines X-ray diffraction, neutron pair distribution function, scanning transmission electron microscopy, Raman spectroscopy, and density functional theory modeling. Electrochemical characterization shows a capacity retention of ≈80% at 1000 mV s –1 (1.5-s charge/discharge time) as compared to 1 mV s –1 (≈16-min charge/discharge time) with cyclability for over 100 000 cycles. Energetics from density functional theory calculations indicate that proton storage occurs at the terminal oxygen sites within the hydrated interlayer. Last, optical micrographs collected during in situ Raman spectroscopy show reversible, multicolor electrochromism, with color changes from pale yellow to blue, purple, and last, orange as a function of proton content. These results highlight the use of selective etching of layered perovskites for the synthesis of metastable transition metal oxide materials and the use of H 2 W 2 O 7 as an anode material for proton-based energy storage or electrochromic applications.

25 ENERGY STORAGE↗

Strategic Capture of the {Nb 7 } Polyoxometalate

Group V Nb-polyoxometalate (Nb-POM) chemistry generally lacks the elegant pH-controlled speciation exhibited by group VI (Mo, W) POM chemistry. Here three Nb-POM clusters were isolated and structurally characterized; [Nb 14 O 40 (O 2 ) 2 H 3 ] 14- , [((UO 2 )(H 2 O)) 3 Nb 46 (UO 2 ) 2 O 136 H 8 (H 2 O) 4 ] 24- , and [(Nb 7 O 22 H 2 ) 4 (UO 2 ) 7 (H 2 O) 6 ] 22- , that effectively capture the aqueous Nb-POM species from pH 7 to pH 10. These Nb-POMs illustrate a reaction pathway for control over speciation that is driven by counter-cations (Li + ) rather than pH. The two reported heterometallic POMs (with UO 2 2+ moieties) are stabilized by replacing labile H2O/HO-Nb=O with very stable O=U=O. The third isolated Nb-POM features cis-yl-oxos, prior observed only in group VI POM chemistry. Moreover, with these actinide-heterometal contributions to the burgeoning Nb-POM family, it now transects all major metal groups of the periodic table.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvation Effects on the Dielectric Constant of 1 M LiPF6 in Ethylene Carbonate: Ethyl Methyl Carbonate 3:7

We report the dielectric constant of 1 M LiPF 6 in EC:EMC 3:7 w/w (ethylene carbonate/ethyl methyl carbonate) in addition to neat EC:EMC 3:7 w/w. Using three Debye relaxations, the static permittivity value, or dielectric constant, is extrapolated to 18.5, which is compared to 18.7 for the neat solvent mixture. The EC solvent is found to strongly coordinate with the Li + cations of the salt, which results in a loss of dielectric contribution to the electrolyte. However, the small amplitude and large uncertainty in relaxation frequency for EMC cloud definitive identification of the Li + solvation shell. Importantly, the loss of the free EC permittivity contribution due to Li + solvation is almost completely balanced by the positive contribution of the associated LiPF 6 salt, demonstrating that a significant quantity of dipolar ion pairs exists in 1 M LiPF 6 in EC:EMC 3:7.

25 ENERGY STORAGE↗

Towards natural and realistic E 7 GUTs in F-theory

We consider phenomenological aspects of a natural class of Standard Model-like supersymmetric F-theory vacua realized through flux breaking of rigid E 7 gauge factors. Three generations of Standard Model matter are realized in many of these vacua. We further find that many other Standard Model-like features are naturally compatible with these constructions. For example, dimension-4 and 5 terms associated with proton decay are ubiquitously suppressed. Many of these features are due to the group theoretical structure of E 7 and associated F-theory geometry. In particular, a set of approximate global symmetries descends from the E 7 group, leading to exponential suppression of undesired couplings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Combination of inclusive top-quark pair production cross-section measurements using ATLAS and CMS data at $ \sqrt{s} $ = 7 and 8 TeV

A combination of measurements of the inclusive top-quark pair production cross-section performed by ATLAS and CMS in proton–proton collisions at centre-of-mass energies of 7 and 8 TeV at the LHC is presented. The cross-sections are obtained using top-quark pair decays with an opposite-charge electron–muon pair in the final state and with data corresponding to an integrated luminosity of about 5 fb$^{−1}$ at $ \sqrt{s} $ = 7 TeV and about 20 fb$^{−1}$ at $ \sqrt{s} $ = 8 TeV for each experiment. The combined cross-sections are determined to be 178.5 ± 4.7 pb at $ \sqrt{s} $ = 7 TeV and $ {243.3}_{-5.9}^{+6.0} $ pb at $ \sqrt{s} $ = 8 TeV with a correlation of 0.41, using a reference top-quark mass value of 172.5 GeV. The ratio of the combined cross-sections is determined to be R$_{8/7}$ = 1.363 ± 0.032. The combined measured cross-sections and their ratio agree well with theory calculations using several parton distribution function (PDF) sets. The values of the top-quark pole mass (with the strong coupling fixed at 0.118) and the strong coupling (with the top-quark pole mass fixed at 172.5 GeV) are extracted from the combined results by fitting a next-to-next-to-leading-order plus next-to-next-to-leading-log QCD prediction to the measurements. Using a version of the NNPDF3.1 PDF set containing no top-quark measurements, the results obtained are $ {m}_t^{\textrm{pole}}={173.4}_{-2.0}^{+1.8} $ GeV and $ {\alpha}_{\textrm{s}}\left({m}_Z\right)={0.1170}_{-0.0018}^{+0.0021} $.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the $\mathrm{ t \bar{t} }$ production cross section in the $\mathrm{ e \mu }$ channel in proton-proton collisions at $\sqrt{s} =$ 7 and 8 TeV

The inclusive cross section for top quark pair production is measured in proton-proton collisions at √s = 7 and 8 TeV, corresponding to 5.0 and 19.7 fb –1 , respectively, with the CMS experiment at the LHC. The cross sections are measured in the electron-muon channel using a binned likelihood fit to multi-differential final state distributions related to identified b quark jets and other jets in the event. The measured cross section values are 173.6 ± 2.1 (stat) +4.5 -4.0 (syst) ± 3.8 (lumi) pb at √s = 7 TeV, and 244.9 ± 1.4 (stat) +6.3 -5.5 (syst) ± 6.4 (lumi) pb at √s = 8 TeV, in good agreement with QCD calculations at next-to-next-to-leading-order accuracy. The ratio of the cross sections measured at 7 and 8 TeV is determined, as well as cross sections in the fiducial regions defined by the acceptance requirements on the two charged leptons in the final state. The cross section results are used to determine the top quark pole mass via the dependence of the theoretically predicted cross section on the mass, giving a best result of 173.8 +1.7 -1.8 GeV. Furthermore, the data at √s = 8 TeV are also used to set limits, for two neutralino mass values, on the pair production of supersymmetric top squarks with masses close to the top quark mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Influence of Oxygen on the Tribomechanical Properties of Single Crystals of YBa{sub 2}Cu{sub 3}O{sub 7−δ}

This paper reports a study on the mechanical and tribological properties of ab- and a (b) c−planes of YBa{sub 2}Cu{sub 3}O{sub 7−δ} single crystals. The single crystals were grown using a CuO-BaO self-flux method. The oxygenation effect on the mechanical and tribological properties of ab- and a (b) c−planes is reported. For the ab- plane, the hardness and elastic modulus were around 6 and 50 GPa, respectively. In this case, significant differences were not observed among the hardness and elastic modulus at different oxygenation states. However, the hardness and elastic modulus for as-grown and oxygenated YBa{sub 2}Cu{sub 3}O{sub 7−δ} single crystals were different from that of the a (b) c−plane, and were observed to be slightly higher for the as-grown than for the oxygenated samples. For as-grown and oxygenated samples, we observed hardness values around 4.7 and 2.0 GPa, respectively. Regarding the elastic modulus, the values were 75 and 40 GPa, respectively. The indentation fracture toughness values on the ab- plane for the as-grown and oxygenated YBa{sub 2}Cu{sub 3}O{sub 7−δ} single crystal were 3.7 ± 1.2 and 2.9 ± 1.2 MPa m{sup 1/2}, respectively. For the ab- plane, the scratch resistance of the as-grown sample was higher than that of the oxygenated sample and the scratches under load were deeper for the oxygenated sample. As regards the a (b) c−plane, the scar features were seemingly constant through all the scratch lengths and the scratches under load were deeper and larger for the oxygenated than that for the as-grown sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AC Susceptibility and Superconducting Properties of Graphene Added YBa{sub 2}Cu{sub 3}O{sub 7−d}

The effect of graphene (G) addition on YBa{sub 2}Cu{sub 3}O{sub 7−δ}(G){sub x} (x = 0 − 0.03 wt%) has been studied using the X-ray diffraction method, scanning electron microscopy, electrical resistance versus temperature, transport critical current density J{sub c}, and AC susceptibility measurements. XRD patterns showed single-phase YBa{sub 2}Cu{sub 3}O{sub 7−δ} (YBCO) for all samples. SEM micrographs showed filling of the voids between YBa{sub 2}Cu{sub 3}O{sub 7−δ} grains as graphene was added. The temperature-dependent electrical resistance curves showed metallic normal state behavior and onset transition temperature T{sub conset} between 90 and 92 K for all samples. AC susceptibility measurement showed transition temperature T{sub cχ{sup ′}} between 90 and 93 K. T{sub cχ{sup ′}} was maintained or improved slightly as graphene was added. The x = 0.001 wt% showed the highest J{sub c}, i.e., 2750 A cm{sup −2} at 77 K and 5570 mA cm{sup −2} at 30 K which was 13 and 40 times higher than that of the non-added YBCO, respectively. The peak temperature T{sub p} of the imaginary part of the susceptibility χ{sup ″} was around 78–82 K for all samples indicating grain coupling was not weakened as graphene was added.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Ferrimagnetic Cr{sub 2}S{sub 3} on AC Susceptibility and Superconducting Properties of YBa{sub 2}Cu{sub 3}O{sub 7−δ}

Superconductivity and magnetism are mutually exclusive phenomena. This work was carried out to investigate the effect of ferrimagnetic Cr{sub 2}S{sub 3} addition on YBa{sub 2}Cu{sub 3}O{sub 7−δ} superconductor. The solid-state reaction method was used to prepare YBa{sub 2}Cu{sub 3}O{sub 7−δ} (Cr{sub 2}S{sub 3}){sub x} (x = 0 to 0.3 wt%). The samples were characterized by using the four-probe method to measure the electrical resistivity and AC susceptibility to measure the critical temperature, T{sub cχ} and critical current density at the peak temperature T{sub p} of the complex susceptibility, J{sub c}(T{sub p}). The x-ray diffraction (XRD) method was used to determine the phase and structure of the sample. Field emission electron microscopy (FESEM) was used to determine the microstructure. The x = 0.05 sample showed the highest onset transition temperature, T{sub c−onset} (93 K), zero-resistance temperature, T{sub c−zero} (89 K), T{sub cχ} (93 K) and T{sub p} (86 K). Addition of Cr{sub 2}S{sub 3} did not affect the orthorhombic structure. However, the addition of Cr{sub 2}S{sub 3} for x ≥ 0.10 showed some impurity peaks in the XRD patterns. The grain size decreased with Cr{sub 2}S{sub 3} addition. Cr{sub 2}S{sub 3} improved the intergrain coupling and flux pinning as indicated by the increase in J{sub c}(T{sub p}) and T{sub p}. These results are compared with other magnetic and non-magnetic materials addition to YBa{sub 2}Cu{sub 3}O{sub 7−δ}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical, Structural, and Thermal Properties of Ferrite/Superconductor (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7-δ}) Nanocomposite Materials

The superconductor YBa{sub 2}Cu{sub 3}O{sub 7-δ} (Y123) is prepared by the solid-state route, while the nanosized Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} (Ni-Zn ferrite) is synthesized via citric acid sol-gel technique. The composite material of the type (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7-δ}, where x = 0.00, 0.03, 0.10, and 0.50 wt%, is prepared by a modified solid-state method to study the effect of doping Ni-Zn nanosized ferrite on the superconducting, structure, and thermal properties of Y123. The prepared samples show Meissner effect which confirmed the presence of superconducting phase at liquid nitrogen temperature (77 K). The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersion of X-ray (EDX), infra-red (IR) spectroscopy, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), DC resistance by four-probe, and critical current density measurements. It was found that by increasing Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanoparticles in the Y123 compound, the unit cell volume of the orthorhombic phase decreases, but the transition temperature T{sub c} and critical current density J{sub c} decrease for low doping (x = 0.03 wt%) then increase (x = 0.10 and 0.50 wt%) for Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} doped in Y123. The transport properties of the (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7}-{sub δ} composite as electrical resistance R, T{sub c}, and J{sub c} are interpreted according to Bean’s critical state model and charge-vortex interaction combined with vortex pinning in Y123 high-T{sub c} mixed-state type-II superconductor. Highlights: The critical current density J{sub c} decreased for low doping of nanosized Ni-Zn ferrite into Y123 with ratio of 0.03 wt% and increased by increasing doping ratio to 0.50 wt%. The physical properties are improved by the coexistence of the superconductor Y123 and nanosized Ni-Zn ferrites in nanocomposite material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure and Magnetic Properties of the Ti-Doped Pyrochlore Molybdate Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7}

The structural, heat capacity, and magnetic properties of Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} were investigated in this work. Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} maintains the pyrochlore structure, but lattice constants are observed to decrease continuously with the Ti{sup 4+} doping. The magnetic measurements indicate a magnetic phase transition at low temperature for all Ti-doped samples, and the Ti{sup 4+} doping suppresses the transition temperature. This is ascribed to the diluted effect of nonmagnetic Ti{sup 4+} substitution of magnetic Mo{sup 4+}. The heat capacity data confirm that the low-temperature magnetic phase is spin glass in the Ti{sup 4+}-doped Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} system. The M(H) data reveals the coexistence of antiferromagnetic and ferromagnetic interactions at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photonics of 18-crown-6-containing styryl dye and its complex with cucurbit[7]uril in the presence of lead cation

The photophysical processes and photochemical reactions of 4-[(E)-2-(2,3,5,6,8,9,11,12,14,15-decahydro-1,4,7,10,13,16-benzohexaoxacyclooctadecyn-18-yl)vinyl]-1-ethylpyridinium perchlorate and its complexes with cucurbit[7]uril in water in the absence and in the presence of lead perchlorate were studied by absorption, luminescence, and laser kinetic spectroscopy. Intersystem crossing to the triplet state and trans—cis-photoisomerization of the dye were established. The formation of an inclusion complex of the dye with cucurbit[7]uril was found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exceptional magnetic and magnetoelastic behavior of rare-earth non-centrosymmetric Sm 7 Pd 3

Magnetic compounds possessing an intrinsic combination of near-zero magnetization with high magnetic anisotropy are highly desirable for spinronic applications and memory recording. A comprehensive study of Sm 7 Pd 3 binary compound uncovered a unique combination of strong magnetoelastic behavior, very low net magnetization, and exceptionally high magnetic coercivity. The temperature-dependent X-ray synchrotron powder diffraction study indicates the abrupt changes in the compound's lattice parameters at the magnetic ordering temperature of T C =169 K, although the crystal structure remains non-centrosymmetric hexagonal Th 7 Fe 3 -type down to 6 K. Density functional theory calculations confirm high intrinsic magnetocrystalline anisotropy of Sm 7 Pd 3 , which explains the extremely large coercivity of the polycrystalline sample, up to H cr = 130 kOe at 2 K. In conclusion, this discovery brings to life a novel class of highly anisotropic materials that are distinctly different from known spintronic materials, making them interesting future systems for magnetic memory research.

36 MATERIALS SCIENCE↗

Prenatal exposure to environmental contaminants and body composition at age 7–9 years

The study aim was to investigate the association between prenatal exposure to endocrine disrupting chemicals (EDCs) and the body composition of 7 to 9 year old Flemish children. The subjects were 114 Flemish children (50% boys) that took part in the first Flemish Environment and Health Study (2002–2006). Cadmium, PCBs, dioxins, p,p′-DDE and HCB were analysed in cord blood/plasma. When the child reached 7–9 years, height, weight, waist circumference and skinfolds were measured. Significant associations between prenatal exposure to EDCs and indicators of body composition were only found in girls. After adjustment for confounders and covariates, a significant negative association was found in girls between prenatal cadmium exposure and weight, BMI and waist circumference (indicator of abdominal fat) and the sum of four skinfolds (indicator of subcutaneous fat). In contrast, a significant positive association (after adjustment for confounders/covariates) was found between prenatal p,p′-DDE exposure and waist circumference as well as waist/height ratio in girls (indicators of abdominal fat). No significant associations were found for prenatal PCBs, dioxins and HCB exposure after adjustment for confounders/covariates. This study suggests a positive association between prenatal p,p′-DDE exposure and indicators of abdominal fat and a negative association between prenatal cadmium exposure and indicators of both abdominal as well as subcutaneous fat in girls between 7 and 9 years old. - Highlights: • Associations between prenatal contaminant exposure and anthropometrics in children. • Significant association only found in girls. • No significant associations found for prenatal PCBs, dioxins and HCB exposure. • Girls: negative association between cadmium and abdominal and subcutaneous fat. • Girls: positive association between p,p′-DDE and indicators of abdominal fat.

54 ENVIRONMENTAL SCIENCES↗

Long-term Changes in Pulmonary Function After Incidental Lung Irradiation for Breast Cancer: A Prospective Study With 7-Year Follow-up

Purpose: To evaluate late pulmonary function changes after incidental pulmonary irradiation for breast cancer. Methods and Materials: Forty-three consecutive female patients diagnosed with breast carcinoma and treated with postoperative radiation therapy (RT) at the same dose (50 Gy) and fractionation (2 Gy/fraction, 5 days/week) were enrolled. Pulmonary function tests (PFT) and ventilation/perfusion scans were performed before RT and 6, 12, 24, and 84 months afterward. Results: Forty-one patients, mean age 55 years, were eligible for the analysis. No differences were found in the baseline PFT values for age, smoking status and previous chemotherapy; women undergoing mastectomy showed baseline spirometric PFT values lower than did women treated with conservative surgery. The mean pulmonary dose was 10.9 Gy, being higher in women who also received lymph node RT (15.8 vs 8.6, P<.01). Only 1 patient experienced symptomatic pneumonitis. All PFT values showed a reduction at 6 months. From then on, the forced vital capacity and forced expiratory volume in 1 second began their recovery until reaching, and even exceeding, their baseline values at 7 years. Diffusing capacity of the lungs for carbon monoxide and ventilation/perfusion scans continued to reduce for 24 months and then partially recovered their baseline values (-3.5%, -3.8%, and -5.5%, respectively). Only the percentage difference at 7 years in the ventilation scan correlated with the dosimetric parameters studied. Other variables, such as age, smoking status, previous chemotherapy, and concomitant tamoxifen showed no significant relation with changes in PFT ({Delta}PFT) values at 7 years. Conclusions: The study of reproducible subclinical parameters, such as PFT values, shows how their figures decrease in the first 2 years but practically recover their baseline values in the long term. The extent of the reduction in PFT values was small, and there was no clear association with several dosimetric and clinical parameters.

62 RADIOLOGY AND NUCLEAR MEDICINE↗