Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A New Method for Polishing Laminated Dissimilar Metals

Here, this paper presents a novel method for preparing metallographic samples of laminated dissimilar metals, specifically a layered structure of zirconium (Zr), vanadium (V), and tungsten (W), which pose a challenge due to their differing crystal structures and hardness levels. The work was motivated by the need to develop a cladding for tungsten targets in spallation neutron sources, where a zirconium face is applied over an interlayer of either vanadium or titanium to prevent the formation of brittle intermetallic compounds such as ZrW 2 . Traditional polishing techniques prove inadequate because each constituent metal requires a different polishing approach based on its unique material properties. The methodology outlined includes a sequential process involving conductive epoxy mounting, successive grinding and polishing with specific abrasives, and a final chemical-mechanical polish using a colloidal silica-based solution. Optical microscopy confirmed that this multi-step process successfully produced scratch-free surfaces and minimized surface relief across the different metal interfaces. Although developed for refractory metals, this approach shows promise for other layered structures comprised of transition metals, offering a meticulous yet effective technique for high-quality metallographic sample preparation.

Newberry, Daniel [Oak Ridge National Laboratory (O↗

Influence of catalyst synthesis method on selective catalytic reduction (SCR) of NO by NH 3 with V 2 O 5 -WO 3 /TiO 2 catalysts

We compared the molecular structures, surface acidity and catalytic activity for NO/NH 3 /O 2 SCR of V 2 O 5 -WO 3 /TiO 2 catalysts for two different synthesis methods: co-precipitation of aqueous vanadium and tungsten oxide precursors with TiO(OH) 2 and by incipient wetness impregnation of the aqueous precursors on a reference crystalline TiO 2 support (P25; primarily anatase phase). Bulk analysis by XRD showed that co-precipitation results in small and/or poorly ordered TiO 2 (anatase) particles and that VO x and WO x do not form solid solutions with the bulk titania lattice. Surface analysis of the co-precipitated catalyst by High Sensitivity-Low Energy Ion Scattering (HS-LEIS) confirms that the VO x and WO x are surface segregated for the co-precipitated catalysts. In situ Raman and IR spectroscopy revealed that the vanadium and tungsten oxide components are present as surface mono-oxo O = VO 3 and O = WO 4 sites on the TiO 2 supports. Co-precipitation was shown for the first time to also form new mono-oxo surface VO 4 and WO 4 sites that appear to be anchored at surface defects of the TiO 2 support. IR analysis of chemisorbed ammonia showed the presence of both surface NH 3 * on Lewis acid sites and surface NH 4 +* on Brønsted acid sites. TPSR spectroscopy demonstrated that the specific SCR kinetics was controlled by the redox surface VO 4 species and that the surface kinetics was independent of TiO 2 synthesis method or presence of surface WO 5 sites. SCR reaction studies revealed that the surface WO5 sites possess minimal activity below ~325 °C and their primary function is to increase the adsorption capacity of ammonia. A relationship between the SCR activity and surface acidity was not found. The SCR reaction is controlled by the surface VO 4 sites that initiate the reaction at ~200 °C. The co-precipitated catalysts were always more active than the corresponding impregnated catalysts. Finally, we ascribe the higher activity of the co-precipitated catalysts to the presence of the new surface WO x sites associated surface defects on the TiO 2 support that increase the ammonia adsorption capacity.

36 MATERIALS SCIENCE↗

Binding and leaching of trace elements in Portland cement pastes

Portland cement contains trace elements originating from the raw materials and the fuels used for cement production. The trace elements are bound to some extent during cement hydration. A small fraction remains dissolved in the pore solution. The dissolved fractions of antimony, barium, chromium, lead, molybdenum and vanadium were quantified in the course of hydration of four different Portland cements. The development of heavy metal concentrations signifies the relevant hydration products for the binding of heavy metals. For chromate and molybdate a substitution for sulfate in ettringite was found. Vanadium and antimony are most likely not bound in ettringite. Barium precipitates as barium sulfate. For lead no clear trends could be observed. Leaching experiments were carried out and the concentrations of the leachates were compared to pore solution concentrations to check if the solubility of the heavy metals is relevant or if the leaching process is controlled by diffusion.

36 MATERIALS SCIENCE↗

A bi-layer barrier design for 122-type iron-based superconducting wires and tapes

Iron-based superconducting wires and tapes hold great promise for high-field magnet applications. A promising design for 122-type wires and tapes based on the powder-in-tube method is using silver and copper double-layer sheaths. For this design a heat treatment temperature below ~ 779 °C is required to prevent Ag-Cu liquid formation. However, this may be below the optimal heat treatment temperature for the critical current density, and still cannot prevent Ag-Cu interdiffusion occurring in the solid state. In this work we propose adding a niobium or tantalum or vanadium (or their alloys) barrier layer between the Ag and Cu to solve the Ag-Cu interdiffusion issue, given that the group-VB metals (vanadium, niobium, tantalum) are relatively inert to both Ag and Cu. To investigate the effectiveness of this design, BaFe 1.84 Co 0.16 As 2 wires and tapes with Ag/Cu and Ag/Ta/Cu sheaths, as well as Ba 0.6 K 0.4 Fe 2 As 2 wires and tapes with Ag/Cu and Ag/Nb/Cu sheaths, were fabricated. It was found that both the Ta and Nb layers kept integral after wire drawing, but after a large flat-rolling reduction the Ta layer broke while the Nb layer kept integral. In the tapes with Ag/Cu sheaths (without the Ta or Nb layer) Cu diffused through the Ag layer and into the powder cores during 740 °C heat treatment, while in the tapes with Ag/Nb/Cu sheaths the Nb layer effectively blocked Ag-Cu interdiffusion even at 900 °C. Further, this work demonstrates that Ta is a suitable barrier material for 122-type wires, while Nb is suitable for both wires and tapes. In this design using Ag/Nb (or Ta)/Cu sheaths, we can regard the outer Cu as the conductor matrix while the Ag and Nb (or Ta) serve as two layers of barriers that suppress reactions between the components. Thus, we call this design a “bi-layer barrier” design for 122-type wires and tapes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of CeO2 Support Facets on VOx/CeO2 Catalysts in Oxidative Dehydrogenation of Methanol

CeO2 supports with dominating facets, i.e., low index (100), (110) and (111) facets, are prepared. The facet effects on the structure and catalytic performance of supported vanadium oxide catalysts are investigated using oxidative dehydrogenation of methanol as a model reaction. In the presence of mixed facets, Infrared and Raman characterizations demonstrate that surface vanadia species preferentially deposit on CeO2 (100) facets, presumably because of its higher surface energy. At the same surface vanadium densities, VOx species on (100) facets show better dispersion, followed by (110) and (111) facets. The VOx species on CeO2 nanorods with (110) and (100) facets display higher activity and lower apparent activation energies compared to that on CeO2 nanopolyhedras with dominating (111) facets and CeO2 nanocubes with dominating (100) facets. The higher activity for VOx/CeO2(110) might be related to the more abundant oxygen vacancies present on the (110) facets, evidenced from Raman spectroscopic measurements.

ceria↗

Comparative analysis for various redox flow batteries chemistries using a cost performance model

A robust performance-based cost model is developed for all-vanadium, iron-vanadium and iron chromium redox flow batteries. Systems aspects such as shunt current losses, pumping losses and thermal management are accounted for. The objective function, set to minimize system cost, allows determination of stack design and operating parameters such as current density, flow rate and depth of discharge (DOD). Component costs obtained from vendors are used to calculate system costs for various time frames. A 2 kW stack data was used to estimate unit energy costs and compared with model estimates for the same size electrodes. The tool has been shared with the redox flow battery community to both validate their stack data and guide future direction.

electrolyte↗

A high-voltage rechargeable magnesium-sodium hybrid battery

Growing global demand of safe and low-cost energy storage technology triggers strong interests in novel battery concepts beyond state-of-art Li-ion batteries. Here we report a high-voltage rechargeable Mg–Na hybrid battery featuring dendrite-free deposition of Mg anode and Na-intercalation cathode as a low-cost and safe alternative to Li-ion batteries for large-scale energy storage. A prototype device using a Na3V2(PO4)3 cathode, a Mg anode, and a Mg–Na dual salt electrolyte exhibits the highest voltage (2.60 V vs. Mg) and best rate performance (86% capacity retention at 10C rate) among reported hybrid batteries. Synchrotron radiation-based X-ray absorption near edge structure (XANES), atomic-pair distribution function (PDF), and high-resolution X-ray diffraction (HRXRD) studies reveal the chemical environment and structural change of Na3V2(PO4)3 cathode during the Na ion insertion/deinsertion process. XANES study shows a clear reversible shift of vanadium K-edge and HRXRD and PDF studies reveal a reversible two-phase transformation and V–O bond length change during cycling. The energy density of the hybrid cell could be further improved by developing electrolytes with a higher salt concentration and wider electrochemical window. This work represents a significant step forward for practical safe and low-cost hybrid batteries.

Li, Yifei↗

Role of structural hydroxyl groups in enhancing performance of electrochemically-synthesized bilayer V 2 O 5

Nanostructured electrode materials represent a promising path forward to dramatically improving the performance of both Li-ion and beyond Li-ion battery systems; however, difficulties in characterizing the structural and electrochemical changes that take place in nanoscale systems, which are often poorly crystalline or amorphous, make it difficult to develop design rules for synthesizing new materials with optimal performance. Bilayered vanadium oxide-based materials (BL-V 2 O 5 ) are an ideal platform for understanding the underlying physicochemical properties that determine capacity in nanomaterials, with electrochemically-synthesized V 2 O 5 (EC-V 2 O 5 ) exhibiting particularly high capacities. In this work we provide evidence that the source of high practical capacity in EC-V 2 O 5 is the presence of “structural hydroxyl groups” that are an intrinsic feature of the electrochemical synthesis method. Using both in situ and ex situ characterization methods, we demonstrate that structural OH species are highly stable and persist in the structure during reversible cycling. We hypothesize three important roles for structural OH groups: they maintain a sufficient interlayer spacing to allow the physical diffusion of cations over multiple cycles; they maintain a consistent solvating environment in the bilayer regardless of structural H 2 O content; and they reduce the symmetry of vanadium polyhedra to favor electron transfer over pseudocapacitive adsorption, making it possible to access close to theoretical capacity. Furthermore, these insights have broad implications for understanding the performance of a variety of hydrated oxide systems, and indicate that the formation of covalently-bound hydroxyoxide species can lead to further improvements in the performance of nanoscale materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

V x In (2– x ) S 3 Intermediate Band Absorbers Deposited by Atomic Layer Deposition

Substitutional alloys of several thin film semiconductors have been proposed as intermediate band (IB) materials for use in next-generation photovoltaics, which aim to utilize a larger fraction of the solar spectrum without sacrificing significant photovoltage. Here, we demonstrate a novel approach to IB material growth, namely atomic layer deposition (ALD), to enable unique control over substitutional-dopant location and density. Two new ALD processes for vanadium sulfide incorporation are introduced, one of which incorporates a vanadium (III) amidinate previously untested for ALD. We synthesize the first thin film V x In (2-x) S 3 intermediate band semiconductors, using this process, and further demonstrate that the V:In ratio, and therefore intraband gap density of states, can be finely tuned according to the ALD dosing schedule. Deposition on a crystalline In 2 S 3 underlayer promotes the growth of a tetragonal β-In 2 S 3 -like phase V x In (2-x) S 3 , which exhibits a distinct sub-band gap absorption peak with onset near 1.1 eV in agreement with computational predictions. But, the V x In (2-x) S 3 films lack the lower energy transition predicted for a partially filled IB, and photoelectrochemical devices reveal a photocurrent response only from illumination with energy sufficient to span the parent band-gap.

36 MATERIALS SCIENCE↗

Template-free vapor-phase growth of patrónite by atomic layer deposition

Despite challenges to control stoichiometry in the vanadium-sulfur system, template-free growth of patrónite, VS 4 , thin films is demonstrated for the first time. A novel atomic layer deposition (ALD) process enables the growth of phase pure films and the study of electrical and vibrational properties of the quasi-one-dimensional (1D) transition metal sulfide. Self-limiting surface chemistry during ALD of VS4 is established via in situ quartz crystal microbalance and quadrupole mass spectrometry between 150 to 200 °C. The V precursor, unconventionally, sheds all organic components in the first half-cycle, while the H 2 S half-cycle generates the disulfide dimer moiety, S 2 -2 , and oxidizes V 3+ to V 4+ . X-ray analysis establishes VS 4 crystallinity and phase purity, as well as a self-limiting growth rate of 0.33 Å/cy, modest roughness (2.4 nm) and expected density (2.7g/cm 3 ). Phase pure films enable a new assignment of vibrational modes and corresponding Raman activity of VS4 that is corroborated by density functional theory (DFT) calculations. Lastly, at elevated growth temperatures, a change in the surface mechanism provides a synthetic route to a second vanadium-sulfur phase, V 2 S 3 .

36 MATERIALS SCIENCE↗

Experiments and Modeling of Uranium Adsorption in the Presence of Other Ions in Simulated Seawater

Seawater contains uranium at an average concentration of 3.3 ppb, as well as a variety of other ions at either overwhelmingly higher or similar concentrations, which complicate the recovery of uranium. This report describes an investigation of the effects of various factors such as uranium speciation and presence of salts including sodium, calcium, magnesium, and bicarbonate, as well as trace elements such as vanadium on uranium adsorption kinetics in laboratory experiments. Adsorption models are also developed to describe the experimental data of uranium extraction from seawater. Results show that the presence of calcium and magnesium significantly slows down the uranium adsorption kinetics. Vanadium can replace uranium from amidoxime-based adsorbent in the presence of sodium in the solution. Results also show that bicarbonate in the solution strongly competes with amidoxime for binding uranium, and thus slows down the uranium adsorption kinetics. Developed on the basis of the experimental findings, the model is capable of describing the effects of pH, ionic strength, temperature, and concentration of various species. The results of this work are useful in the understanding of the important factors that control the adsorbent capacity and kinetics of uranium uptake by amidoxime-based adsorbents.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Spark Plasma Sintering (SPS)-Assisted Synthesis and Thermoelectric Characterization of Magnéli Phase V 6 O 11

The Magnéli phase V6O11 was synthesized in gram amounts from a powder mixture of V 6 O 11 /V 7 O 13 and vanadium metal, using the spark plasma sintering (SPS) technique. Its structure was determined with synchrotron X-ray powder diffraction data from a phase-pure sample synthesized by conventional solid-state synthesis. A special feature of Magnéli-type oxides is a combination of crystallographic shear and intrinsic disorder that leads to relatively low lattice thermal conductivities. SPS prepared V 6 O 11 has a relatively low thermal conductivity of κ = 2.72 ± 0.06 W (m K) –1 while being a n-type conductor with an electrical conductivity of σ = 0.039 ± 0.005 (μΩ m) –1 , a Seebeck coefficient of α = –(35 ± 2) μV K –1 , which leads to a power factor of PF = 4.9 ± 0.8 × 10 –5 W (m K 2 ) –1 at ~600 K. Advances in the application of Magnéli phases are mostly hindered by synthetic and processing challenges, especially when metastable and nanostructured materials such as V6O11 are involved. Here, this study gives insight into the complications of SPS-assisted synthesis of complex oxide materials, provides new information about the thermal and electrical properties of vanadium oxides at high temperatures, and supports the concept of reducing the thermal conductivity of materials with structural building blocks such as crystallographic shear (CS) planes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Oxidative Dehydrogenation of Propane with Supported Vanadia Catalysts Using Multireference Methods

The oxidative dehydrogenation of propane over supported vanadium oxide catalysts poses significant computational challenges due to complex electronic structure changes along the reaction coordinate, driven primarily by changes in the oxidation states of vanadium. To address these challenges, we systematically test quantum chemical methods, including multireference (MR) approaches, domain-based local pair natural orbital coupled cluster theory (DLPNO-CCSD(T)), and density functional theory (DFT). The initial C–H bond-breaking transition state requires MR treatment due to its multireference character, while subsequent steps permit efficient single-reference calculations. For the rate-limiting C–H activation step mediated by the vanadyl moiety, complete 1 active space second-order perturbation theory (CASPT2) yields an apparent activation barrier (E app 600K ) of 138 kJ/mol, consistent with experimental values (134 ± 4 kJ/mol; Gruene et al. Catal. Today 2010, 157, 137). In contrast, DLPNO-CCSD(T) overestimates this barrier (198 kJ/mol), whereas DFT predictions span 125–150 kJ/mol, depending on the functional. Our multireference investigation of this transition metal oxide-catalyzed process demonstrates that an active space that incorporates the C–H σ and V=O σ/π bonding orbitals, oxygen lone pairs, and their antibonding counterparts adequately captures electronic structure changes along the chemical transformation. Furthermore, these findings provide a general strategy for active space selection in transition metal oxide-catalyzed C/O–H bond activation reactions. The reference dataset from this work, which includes MR calculations with manually selected active spaces for all intermediates and transition states in the propane ODH reaction network, will serve as a benchmark for automating active space selection in similar systems.

Catalysts↗

Multifunctional Microelectro-Opto-mechanical Platform Based on Phase-Transition Materials

Along with the rapid development of hybrid electronic-photonic systems, multifunctional devices with dynamic responses have been widely investigated for improving many optoelectronic applications. For years, microelectro-opto-mechanical systems (MEOMS), one of the major approaches to realizing multifunctionality, have demonstrated profound reconfigurability and great reliability. However, modern MEOMS still suffer from limitations in modulation depth, actuation voltage, or miniaturization. Here, we demonstrate a new MEOMS multifunctional platform with greater than 50% optical modulation depth over a broad wavelength range. This platform is realized by a specially designed cantilever array, with each cantilever consisting of vanadium dioxide, chromium, and gold nanolayers. The abrupt structural phase transition of the embedded vanadium dioxide enables the reconfigurability of the platform. Diverse stimuli, such as temperature variation or electric current, can be utilized to control the platform, promising CMOS-compatible operating voltage. Multiple functionalities, including an active enhanced absorber and a reprogrammable electro-optic logic gate, are experimentally demonstrated to address the versatile applications of the MEOMS platform in fields such as communication, energy harvesting, and optical computing.

36 MATERIALS SCIENCE↗

Ring Size Effects on the Structures of Sandwich Compounds with a Stoichiometry of C 12 H 12 M (M = Ti–Ni)

Ring size effects on geometries and electronic structures were investigated for the (C n H n )M(C m H m ) (n = 4, 5, or 6; m = 8, 7, or 6; m + n = 12; M = Ti–Ni) systems using density functional theory. The lowest-energy C 12 H 12 M structures for the early transition metals titanium, vanadium, and chromium are the experimentally known singlet (η 5 -C 5 H 5 )Ti(η 7 -C 7 H 7 ), doublet (η 5 -C 5 H 5 )V(η 7 -C 7 H 7 ), and singlet (η 6 -C 6 H 6 ) 2 Cr, respectively. The likewise experimentally known singlet (η 6 -C 6 H 6 ) 2 Ti, doublet (η 6 -C 6 H 6 ) 2 V, and singlet (η 5 -C 5 H 5 )Cr(η 7 -C 7 H 7 ) are the secondlowest- energy structures with only a small energy difference between the two vanadium structures. For the later transition metals, dibenzenemetal complexes are the lowest-energy C 12 H 12 M species with two fully bonded hexahapto benzene rings in the lowest-energy manganese and iron derivatives and one hexahapto and one dihapto benzene ring in the lowest-energy cobalt and nickel derivatives. The lowest-energy (C 5 H 5 )M(C 7 H 7 ) structures for the later transition metals iron, cobalt, and nickel have partially bonded nonplanar C 7 H 7 rings with one or two uncomplexed C=C bonds. The (C 4 H 4 )M(C 8 H 8 ) (M = Ti–Ni) structures with the metal sandwiched between four- and eight-membered rings were found to be much higher in energy than their (C 5 H 5 )M(C 7 H 7 ) and (C 6 H 6 ) 2 M isomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vanadate Retention by Iron and Manganese Oxides

Anthropogenic emissions of vanadium (V) into terrestrial and aquatic surface systems now match those of geogenic processes, and yet, the geochemistry of vanadium is poorly described in comparison to other comparable contaminants like arsenic. In oxic systems, V is present as an oxyanion with a +5 formal charge on the V center, typically described as H x VO 4 (3–x)– , but also here as V(V). Iron (Fe) and manganese (Mn) (oxy)hydroxides represent key mineral phases in the cycling of V(V) at the solid–solution interface, and yet, fundamental descriptions of these surface-processes are not available. Here, we utilize extended X-ray absorption fine structure (EXAFS) and thermodynamic calculations to compare the surface complexation of V(V) by the common Fe and Mn mineral phases ferrihydrite, hematite, goethite, birnessite, and pyrolusite at pH 7. Inner-sphere V(V) complexes were detected on all phases, with mononuclear V(V) species dominating the adsorbed species distribution. Our results demonstrate that V(V) adsorption is exergonic for a variety of surfaces with differing amounts of terminal –OH groups and metal–O bond saturations, implicating the conjunctive role of varied mineral surfaces in controlling the mobility and fate of V(V) in terrestrial and aquatic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-Based Synthesis of Functional Morphological Variants and Carbon Nanotube-Based Composites of VS 4 for Electrochemical Applications

A novel facile, fast, and efficient microwave-assisted method was developed to synthesize a number of diverse nanostructured motifs (ranging from nanorods to nanoflowers) of VS 4 along with its associated composite heterostructures, VS 4 /multi-walled carbon nanotube (MWNT; i.e., multi-walled carbon nanotubes). Specifically, we have probed and correlated the effects of a number of specific experimental variables, including primarily precursor, solvent, temperature, and time. We noted that nanorods formed more readily with VO(acac) 2 as the vanadium precursor and n-methyl-2-pyrrolidone (NMP) as a polar reaction solvent. By contrast, we determined that hierarchical three-dimensional (3D) nanoflower-like assemblies, ranging in size from 100 to 200 nm in average diameter, could be controllably synthesized by using Na 3 VO 4 as the vanadium precursor and an aqueous water: polar solvent mixture as the reaction medium. We also observed that VS 4 disintegrates, when in the presence of either air, solution, or a combination of these environments, and established that the extent of VS4 nanorod decomposition could be almost fully prevented by storage under nitrogen. From an application’s perspective, our VS 4 is electrochemically active and shows behavior, consistent with the literature. In particular, as compared with pristine VS 4 nanorods alone, we observed enhanced electrochemical activity with (i) 3D hierarchical flower-like motifs, (ii) unique necklace-like VS 4 nanorod–MWNT composites, and (iii) samples in which as-prepared VS4 nanorods had been annealed. Moreover, we found that the rational application of specific physical and chemical processing treatments, such as (i) thermal annealing to improve crystallinity, (ii) the addition of MWNTs to form conductive composites, and (iii) the evolution of morphology from one-dimensional (1D) nanorods to more complex 3D nanoflowers, was favorable to the resulting electrochemical performance with respect to increasing stability and reversibility.

25 ENERGY STORAGE↗