Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “theoretical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Wind tunnel studies of Martian aeolian processes

Preliminary results are reported of an investigation which involves wind tunnel simulations, geologic field studies, theoretical model studies, and analyses of Mariner 9 imagery. Threshold speed experiments were conducted for particles ranging in specific gravity from 1.3 to 11.35 and diameter from 10.2 micron to 1290 micron to verify and better define Bagnold's (1941) expressions for grain movement, particularly for low particle Reynolds numbers and to study the effects of aerodynamic lift and surface roughness. Wind tunnel simulations were conducted to determine the flow field over raised rim craters and associated zones of deposition and erosion. A horseshoe vortex forms around the crater, resulting in two axial velocity maxima in the lee of the crater which cause a zone of preferential erosion in the wake of the crater. Reverse flow direction occurs on the floor of the crater. The result is a distinct pattern of erosion and deposition which is similar to some martian craters and which indicates that some dark zones around Martian craters are erosional and some light zones are depositional.

Greeley, R.↗

Atmospheric secondary gamma radiation

A theoretical model in the form of a three-dimensional Monte Carlo calculation is developed that starts with known cosmic ray flux at the top of the atmosphere and follows particles as they interact with the atmosphere for a schematic representation of how atmospheric secondary gamma rays are produced. The model predicts atmospheric secondary gamma radiation as a function of altitude, energy, and zenith angle.

Thompson, D. J.↗

Objectives of the Airline Firm: Theory

Theoretical models are formulated for airline firm operations that revolve around alternative formulations of managerial goals which these firms are persuing in practice. Consideration is given to the different objective functions which the companies are following in lieu of profit maximization.

Kneafsey, J. T.↗

Possible thermal history of the moon.

The possible thermal history of the moon is investigated by means of theoretical models. The calculations include the effects of melting and time-dependent redistribution of radioactive heat sources. The known constraints can best be satisfied by a model which is characterized by relatively high initial temperatures close to the melting range; melting and, consequently, fractionation and redistribution of radionuclides would occur during the first 1.5 b.y. and would then be followed by an effective cooling process. Heat flow measurements on the lunar surface should permit a distinction between such a completely fractionated model and a nonfractionated model or a model with restricted fractionation in the outer few hundred kilometers.

Fricker, P. E.↗

Hydrodynamic prediction of peak pool-boiling heat fluxes from finite bodies.

Previous theoretical models are considered, giving attention to the original formulation proposed by Zuber (1959), an infinite horizontal flat plate, a horizontal cylinder, and a sphere. Some general features of any hydrodynamic prediction are inferred by examining the characteristics of the models. It is found possible to eliminate the need for observed values of the vapor-blanket thickness. The concepts obtained are utilized in the derivation of expressions for the prediction of the peak pool-boiling heat flux in the case of some new configurations.

Lienhard, J. H.↗

Effects of contaminants in CO2 lasers.

A theoretical model which includes the effects of contaminants is developed for the high flow electric discharge CO2-N2-He laser. The model couples the excitation and relaxation processes, CO2 dissociation, and negative ion formation with the flow processes. An analysis of the effects of CO, O2, NO, and N2O impurities on the average small signal gain is presented. CO decreases the gain by collisional depopulation of the upper laser level, and O2, NO, and N2O reduce the gain by decreasing the electron density by forming stable negative ions. In particular, N2O exhibits a strong quenching effect because of its large dissociation cross section for the formation of O(-).

Smith, N. S.↗

Experimental verification of the energy dissipation mechanism in acoustic dampers.

An experimental program is described which verifies the theoretical model that acoustic damping devices undergoing high intensity oscillations dissipate energy via jet kinetic losses. Pressure measurements within the damping devices and flow duct together with detailed surveys of the jet velocities provide the experimental confirmation. The theory accounts for duct flow effects, both steady and unsteady, as well as the jet dissipation. Discrepancies between theory and experiment can be traced to neglect of higher order terms or ignoring the difficult wall friction term in the case of the quarter-wave tube.

Tang, P. K.↗

Helium abundance of the sun.

Critical review of the four methods that have been used to estimate the ratio of helium to hydrogen in the sun - the solar neutrino flux, spectral intensity of helium lines in prominences and the chromosphere, elemental abundance of solar cosmic rays, and variations of solar wind He/H. At present the measured value for the neutrino flux cannot be explained by any of the theoretical models of the sun, and thus the neutrino measurements cannot yield an estimate of He/H. Helium line intensity measurements give the most accurate values for He/H now available - i.e., 5 to 8% helium by number. However, these results refer to the chromosphere and prominences only, and questions of spatial and temporal variations of the observed quantities and of the inferred helium abundances have not yet been dealt with adequately.

Hirshberg, J.↗

Galactic X-ray polarimetry and high-resolution X-ray spectroscopy.

Stellar X-ray spectroscopy and polarimetry are discussed in terms of the source parameters that can be determined through such studies and in terms of the constraints that these studies will place on theoretical models. The spectroscopic and polarimetric results that have been obtained to date are reviewed. These include the recent discovery of X-ray polarization in the Crab Nebula and the recent evidence for X-ray coronal line emission in the Cygnus Loop. Finally, the properties and predicted performance of a number of satellite-borne spectrometers and polarimeters are presented.

Novick, R.↗

The brightness temperature of Venus and the absolute flux-density scale at 608 MHz.

The disk temperature of Venus was measured at 608 MHz near the inferior conjunction of 1972, and a value of 498 plus or minus 33 K was obtained using a nominal CKL flux-density scale. The result is consistent with earlier measurements, but has a much smaller uncertainty. Our theoretical model prediction is larger by a factor of 1.21 plus or minus 0.09. This discrepancy has been noticed previously for frequencies below 1400 MHz, but was generally disregarded because of the large observational uncertainties. No way could be found to change the model to produce agreement without causing a conflict with well-established properties of Venus. Thus it is suggested that the flux-density scale may require an upward revision, at least near this frequency, in excess of what has previously been considered likely.

Muhleman, D. O.↗

Stripping in collisions between hydrogen molecules below 500 eV.

Measurement of the cross section of stripping the mass 2 and 4 isotopes from molecular hydrogen in their parent gases at kinetic energies between 50 and 500 eV. The angular dependence of the ions is found to be highly peaked in the forward direction, at energies above 100 eV. Plotted vs incident velocity, the cross sections for H2 and D2 approached the same value at the highest velocities and did diverge toward lower velocities. The behavior of the cross sections is found to be consistent with a theoretical model suggested by Demkov and Komarov (1968).

Peterson, R. K.↗

The influence of polarization on millimeter wave propagation through rain

The influence of polarization on millimeter wave propagation is investigated from both an experimental and a theoretical viewpoint. First, previous theoretical and experimental work relating to the attenuation and depolarization of millimeter waves by rainfall is discussed. Considerable detail is included in the literature review. Next, a theoretical model is developed to predict the cross polarization level during rainfall from the path average rain rate and the scattered field from a single raindrop. Finally, data from the VPI and SU depolarization experiment are presented as verification of the new model, and a comparison is made with other theories and experiments. Aspects of the new model are: (1) spherical rather than plane waves are assumed, (2) the average drop diameter is used rather than a drop size distribution, and (3) it is simple enough so that the effect which changing one or more parameters has on the crosspolarization level is easily seen.

Wiley, P. H.↗

The influence of polarization on millimeter wave propagation through rain

The measurement and analysis of the depolarization and attenuation that occur when millimeter wave radio signals propagate through rain are described. Progress was made in three major areas: the processing of recorded 1972 data, acquisition and processing of a large amount of 1973 data, and the development of a new theoretical model to predict rain cross polarization and attenuation. Each of these topics is described in detail along with radio frequency system design for cross polarization measurements.

Bostian, C. W.↗

A search for global and seasonal variation of methane from Nimbus 4 IRIS measurements

The Nimbus 4 infrared interferometer spectrometer (IRIS) measurements in the region around wave number 1304 show absorption due to methane in the earth's atmosphere. From the laboratory measurements of the absorption coefficient and a selected vertical distribution corresponding to 1.13 atm cm of methane, a theoretical model for the transmittance at wave number 1304 is developed. The weighting function deduced from this model shows a maximum around 300 mb. Some weak absorption due to nitrous oxide in the atmosphere has been taken into account. The vertical temperature profile, derived from the 15 micron CO2 band in the IRIS spectrum, together with the methane weighting function have been used in a consistent way to compute the upwelling intensity at wave number 1304. The brightness temperature corresponding to the IRIS observed radiance at wave number 1304 has been compared with the brightness temperature deduced from the calculated upwelling intensity from 80 deg North to 80 deg South and for different periods of the year. This comparison shows that the two brightness temperatures agree with one another to within the accuracy of measurements about 2 K. From this result it was found that global or seasonal variability of methane is less than + or - 0.25 atm cm.

Prabhakara, C.↗

Lamp pumped Nd:YAG laser. Space-qualifiable Nd:YAG laser for optical communications

Results are given of a program concerned with the design, fabrication, and evaluation of alkali pump lamps for eventual use in a space qualified Nd:YAG laser system. The study included evaluation of 2mm through 6mm bore devices. Primary emphasis was placed upon the optimization of the 4mm bore lamp and later on the 6mm bore lamp. As part of this effort, reference was made to the Sylvania work concerned with the theoretical modeling of the Nd:YAG laser. With the knowledge gained, a projection of laser performance was made based upon realistic lamp parameters which should easily be achieved during following developmental efforts. Measurements were made on the lamp performance both in and out of the cavity configuration. One significant observation was that for a constant vapor pressure device, the spectral and fluorescent output did not vary for vacuum or argon environment. Therefore, the laser can be operated in an inert environment (eg. argon) with no degradation in output. Laser output of 3.26 watts at 430 watts input was obtained for an optimized 4mm bore lamp.

Ward, K. B.↗

Characteristics of capacitor-type micrometeoroid flux detectors when impacted with simulated micrometeoroids

A series of impact tests are described and data presented which characterize the operation of the capacitor-type micrometeoroid flux detectors used on the Meteoroid Technology Satellite (MTS). Capacitor-type detectors with silicon dioxide dielectric thickness of 0.4 and 1.0 microns were tested in the micrometeoroid impact simulator at the Langley Research Center, a 4-MV Van de Graaff electrostatic accelerator. The carbonyl iron projectiles were from 0.5 to 5.0 microns in diameter with velocities from 4 to 10.0 km/sec. The detector bias voltage was varied from -20 to -60 V; some tests were at detector temperatures of 90 C to -100 C; and the angle of impact varied from 0 deg to 75 deg from the normal to the detector. These tests showed that: (1) the detector operation is reliable when the bias voltage is greater than 30 V; (2) after an impact the detector returns to its original condition with an insignificant loss of active area; and (3) the sensitivity of the detector is inversely proportional to the detector thickness. The test results suggest a theoretical model in which the signal is an arc triggered by the impacting projectile, and the detector bias voltage must be high enough to insure that an arc will form.

Kassel, P. C., Jr.↗

Study of blood flow sensing with microwave radiometry

A study and experimental investigation has been performed to determine the feasibility of measuring regional blood flow and volume in man by means of microwave radiometry. An indication was expected of regional blood flow from measurement of surface and subsurface temperatures with a sensitive radiometer. Following theoretical modeling of biological tissue, to determine the optimum operating frequency for adequate sensing depth, a sensitive microwave radiometer was designed for operation at 793 MHz. A temperature sensitivity of of 0.06 K rms was realized in this equipment. Measurements performed on phantom tissue models, consisting of beef fat and lean beefsteak showed that the radiometer was capable of sensing temperatures from a depth between 3.8 and 5.1 cm. Radiometric and thermodynamic temperature measurements were also performed on the hind thighs of large dogs. These showed that the radiometer could sense subsurface temperatures from a depth of, at least, 1.3 cm. Delays caused by externally-generated RF interference, coupled with the lack of reliable blood flow measurement equipment, prevented correlation of radiometer readings with reginal blood flow. For the same reasons, it was not possible to extend the radiometric observations to human subjects.

Porter, R. A.↗

Analysis of the injection of a heated turbulent jet into a cross flow

The development of a theoretical model is investigated of the incompressible jet injection process. The discharge of a turbulent jet into a cross flow was mathematically modeled by using an integral method which accounts for natural fluid mechanisms such as turbulence, entrainment, buoyancy, and heat transfer. The analytical results are supported by experimental data and demonstrate the usefulness of the theory for estimating the trajectory and flow properties of the jet for a variety of injection conditions. The capability of predicting jet flow properties, as well as two- and three-dimensional jet paths, was enhanced by obtaining the jet cross-sectional area during the solution of the conservation equations. Realistic estimates of temperature in the jet fluid were acquired by accounting for heat losses in the jet flow due to forced convection and to entrainment of free-stream fluid into the jet.

Campbell, J. F.↗