Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

On the effect of bias on the behavior of MOS structures subjected to ionizing radiation

Using a quantitative model [6], the analysis of published data on the effect of the gate bias on the behavior of MOS structure subjected to ionizing radiation is performed. It is shown that, along with hydrogen-containing traps, there are hydrogen-free hole traps in samples with a low content of hydrogen; traps of both types are distributed inhomogeneously over the thickness of the gate insulator. In addition to ionized hydrogen, neutral hydrogen is involved in the formation of surface states and provides the main contribution to this process at negative gate bias. A decrease in the shift of the threshold voltage in the case of high fields is caused by an increase in the drift component of the hole drain to the electrodes.

36 MATERIALS SCIENCE↗

Surface InP/In{sub 0.48}Ga{sub 0.52}P quantum dots: Carrier recombination dynamics and their interaction with fluorescent dyes

We describe the properties and carrier dynamics of surface InP quantum dots (QDs) on In{sub 0.48}Ga{sub 0.52}P, lattice-matched to GaAs (100). The structures were grown using gas-source molecular beam epitaxy. The average height and lateral size of the dots are in the range of 2–6 and 30–50 nm, respectively. The photoluminescence of the surface dots peaks between 750 and 830 nm, depending on the growth conditions, and is red-shifted compared to the emission of the capped QDs grown under similar conditions. The integrated photoluminescence intensity is comparable to that of the capped QDs. The decay time of both surface and capped QDs is around 1 ns at 15 K. The strong luminescence of surface QDs is explained by the effect of acting vacuum/air as an effective barrier and saturated surface states. Enhancement of the QDs luminescence is observed for the samples coated with a fluorescent dye.

36 MATERIALS SCIENCE↗

Weak antilocalization and conductance fluctuation in a single crystalline Bi nanowire

We present the low temperature transport properties of an individual single-crystalline Bi nanowire grown by the on-film formation of nanowire method. The temperature dependent resistance and magnetoresistance of Bi nanowires were investigated. The phase coherence length was obtained from the fluctuation pattern of the magnetoresistance below 40 K using universal conductance fluctuation theory. The obtained temperature dependence of phase coherence length and the fluctuation amplitude indicates that the transport of electrons shows 2-dimensional characteristics originating from the surface states. The temperature dependence of the coherence length derived from the weak antilocalization effect using the Hikami–Larkin–Nagaoka model is consistent with that from the universal conductance fluctuations theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Absorption of surface acoustic waves by topological insulator thin films

We present a theoretical study on the absorption of the surface acoustic waves (SAWs) by Dirac electrons in topological insulator (TI) thin films (TITFs). We find that due to momentum and energy conservation laws, the absorption of the SAWs in TITFs can only be achieved via intra-band electronic transitions. The strong absorption can be observed up to sub-terahertz frequencies. With increasing temperature, the absorption intensity increases significantly and the cut-off frequency is blue-shifted. More interestingly, we find that the absorption of the SAWs by the TITFs can be markedly enhanced by the tunable subgap in the Dirac energy spectrum of the TI surface states. Such a subgap is absent in conventional two-dimensional electron gases (2DEGs) and in the gapless Dirac 2DEG such as graphene. This study is pertinent to the exploration of the acoustic properties of TIs and to potential application of TIs as tunable SAW devices working at hypersonic frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interfacial luminescence in an InAs/InAsSbP isotype type II heterojunction at room temperature

Interfacial luminescence on a single type II heterointerface in the InAs/InAsSbP system at room temperature is observed for the first time. It is confirmed experimentally that a single InAs/InAsSbP hetero-structure is a staggered type II heterojunction. The formation of an electron channel at the heterointerface on the n-InAs side in the n-InAs/n-InAsSbP heterostructure does not lead to the emergence of the radiative interfacial luminescence, while the p-InAs/p-InAsSbP heterostructure under the reverse bias manifests the interfacial luminescence caused by radiative transitions of holes from the occupied surface states localized at the heterointerface. The discovery of an intense interfacial luminescence comparable with bulk luminescence in intensity opens novel opportunities for the design of multicolor light-emitting diodes and integrated opto-electronic matrices for the mid-IR range of 3-5 {mu}m.

36 MATERIALS SCIENCE↗

Physical properties of electron beam evaporated CdTe and CdTe:Cu thin films

In this paper, we report on physical properties of pure and Cu doped cadmium telluride (CdTe) films deposited onto corning 7059 microscopic glass substrates by electron beam evaporation technique. X-ray diffraction study showed that all the deposited films belong to amorphous nature. The average transmittance of the films is varied between 77% and 90%. The optical energy band gap of pure CdTe film is 1.57 eV and it decreased to 1.47 eV upon 4 wt. % of Cu addition, which may be due to the extension of localized states in the band structure. The refractive index of the films was calculated using Swanepoel method. It was observed that the dispersion data obeyed the single oscillator of the Wemple-Didomenico model, from which the dispersion energy (E{sub d}) parameters, dielectric constants, plasma frequency, and oscillator energy (E{sub o}) of CdTe and CdTe:Cu films were calculated and discussed in detail with the light of possible mechanisms underlying the phenomena. The variation in intensity of photoluminescence band edge emission peak observed at 820 nm with Cu dopant is due to the change in surface state density. The observed trigonal lattice of Te peaks in the micro-Raman spectra confirms the p-type conductive nature of films, which was further corroborated by the Hall effect measurement. The lowest resistivity of 6.61 × 10{sup 4} Ω cm was obtained for the CdTe:Cu (3 wt. %) film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of different chemical treatments of surface on the height of Al-p-SiGe and Au-n-SiGe barriers

The effect of different chemical treatments on the properties of Au-n-SiGe and Al-p-SiGe Schottky barriers has been investigated. Etching under different conditions was used to prepare surfaces with different densities of surface states (D{sub ss}). It is shown that the barrier height in the structures under study correlates with the D{sub ss} value and germanium content in the Si{sub 1-x}Ge{sub x} alloy.

36 MATERIALS SCIENCE↗

Defect induced structural and thermoelectric properties of Sb{sub 2}Te{sub 3} alloy

Structural and thermoelectric properties of metallic and semiconducting Sb{sub 2}Te{sub 3} are reported. X-Ray diffraction and Raman spectroscopy studies reveal that semiconducting sample has higher defect density. Nature and origin of possible defects are highlighted. Semiconducting Sb{sub 2}Te{sub 3} hosts larger numbers of defects, which act as scattering center and give rise to the increased value of resistivity, thermopower, and power factor. Thermopower data indicate p-type nature of the synthesized samples. It is evidenced that the surface states are often mixed with the bulk state, giving rise to metallicity in Sb{sub 2}Te{sub 3}. Role of different scattering mechanism on the thermoelectric property of Sb{sub 2}Te{sub 3} is discussed.

36 MATERIALS SCIENCE↗

Unsteady PSP in the NASA Transonic Dynamics Tunnel

For the first time, unsteady pressure sensitive paint (uPSP) has been applied in the NASA Langley Transonic Dynamics Tunnel. Obtaining global surface pressure measurements using the uPSP technique required the development of a new paint formulation for use in the low oxygen heavy gas atmosphere, as well as environmental enclosures to protect sensitive electro-optical components from the high temperature, low pressure environment present during tunnel operation. A high-speed datalink connecting the wind tunnel to Langley’s local high performance compute resource was also established for this test to enable near real time processing of the large datasets that were obtained throughout the campaign. A high-speed lifetime measurement technique was also utilized to yield steady state surface pressures at each condition using the same equipment that was used to provide unsteady measurements. Important metrics such as pressure time histories and power spectral density are compared against traditional unsteady pressure point measurements, and more advanced data products such as dynamic mode decomposition are also explored to provide insight into the underlying flow phenomena.

Daniel T. Reese↗

Low resistance Ti Ohmic contacts to 4H-SiC by reducing barrier heights without high temperature annealing

Ti Ohmic contacts to relatively highly doped (1 Multiplication-Sign 10{sup 18} cm{sup -3}) n-type 4H-SiC have been produced, without high temperature annealing, by means of low temperature electronic cyclotron resonance microwave hydrogen plasma pre-treatment (HPT) of the SiC surface. The as-deposited Ti/4H-SiC contacts show Ohmic properties, and the specific contact resistance obtained is as low as 2.07 Multiplication-Sign 10{sup -4}{Omega}{center_dot}cm{sup 2} after annealing at low temperatures (400 Degree-Sign C). This is achieved by low barrier height at Ti/SiC interface, which could be attributed to decrease of surface states density by the HPT releasing Fermi level pinning, and to band-gap narrowing, image-force, and thermionic-field emission at high doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bastnaesite flotation chemistry issues associated with alkyl phosphate collectors

The hydrophobicity, selectivity, and adsorption state in bastnaesite flotation using alkyl phosphates were examined by contact angle and zeta potential measurements, microflotation and microcalorimetry experiments, as well as density functional theory calculations and molecular dynamics simulations. Here the contact angle and microflotation results show that bastnaesite flotation with alkyl phosphates (lauryl phosphate and 2-ethylhexyl phosphate) is accomplished at a remarkably lower collector concentration. Selective flotation of bastnaesite from calcite with 2-ethylhexyl phosphate increased the bastnaesite grade from 52% to 95% without sacrificing recovery when compared to lauryl phosphate. As expected, the results from density functional theory calculations, together with the microcalorimetry and molecular dynamics simulation results, suggest that the hydrophobic surface state is due to a chemisorbed monolayer of the alkyl phosphate and that the lower reactivity of 2-ethylhexyl phosphate accounts for higher selectivity when compared to results for lauryl phosphate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spin-valley locking and bulk quantum Hall effect in a noncentrosymmetric Dirac semimetal BaMnSb 2

Spin-valley locking in monolayer transition metal dichalcogenides has attracted enormous interest, since it offers potential for valleytronic and optoelectronic applications. Such an exotic electronic state has sparsely been seen in bulk materials. Here, we report spin-valley locking in a Dirac semimetal BaMnSb 2 . This is revealed by comprehensive studies using first principles calculations, tight-binding and effective model analyses, angle-resolved photoemission spectroscopy measurements. Moreover, this material also exhibits a stacked quantum Hall effect (QHE). The spin-valley degeneracy extracted from the QHE is close to 2. This result, together with the Landau level spin splitting, further confirms the spin-valley locking picture. In the extreme quantum limit, we also observed a plateau in the z-axis resistance, suggestive of a two-dimensional chiral surface state present in the quantum Hall state. These findings establish BaMnSb 2 as a rare platform for exploring coupled spin and valley physics in bulk single crystals and accessing 3D interacting topological states.

36 MATERIALS SCIENCE↗

Growth of tungsten nanoparticles in direct-current argon glow discharges

The growth of nanoparticles from the sputtering of a tungsten cathode in DC argon glow discharges is reported. The study was performed at fixed argon pressure and constant discharge current. The growth by successive agglomerations is evidenced. First, tungsten nanocrystallites agglomerate into primary particles, the most probable size of which being {approx}30 nm. Primary particles of this size are observed for all plasma durations and always remain the most numerous in the discharge. Primary particles quickly agglomerate to form particles with size up to {approx}150 nm. For short plasma duration, log-normal functions describe accurately the dust particle size distributions. On the contrary, for long discharge durations, a second hump appears in the distributions toward large particle sizes. In the meantime, the discharge voltage, electron density, and emission line intensities strongly evolve. Their evolutions can be divided in four separate phases and exhibit unusual distinctive features compared to earlier observations in discharges in which particles were growing. The evolution of the different parameters is explained by a competition between the surface state of the tungsten cathode and the influence of the growing nanoparticles. The differences with sputtering glow discharges and chemically active plasmas suggest that the nanoparticle growth and its influence on discharge parameters is system and material dependent.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plethora of tunable Weyl fermions in kagome magnet Fe 3 Sn 2 thin films

Interplay of magnetism and electronic band topology in unconventional magnets enables the creation and fine control of novel electronic phenomena. In this work, we use scanning tunneling microscopy and spectroscopy to study thin films of a prototypical kagome magnet Fe 3 Sn 2 . Our experiments reveal an unusually large number of densely-spaced spectroscopic features straddling the Fermi level. These are consistent with signatures of low-energy Weyl fermions and associated topological Fermi arc surface states predicted by theory. By measuring their response as a function of magnetic field, we discover a pronounced evolution in energy tied to the magnetization direction. Electron scattering and interference imaging further demonstrates the tunable nature of a subset of related electronic states. Our experiments provide a direct visualization of how in-situ spin reorientation drives changes in the electronic density of states of the Weyl fermion band structure. Combined with previous reports of massive Dirac fermions, flat bands, and electronic nematicity, our work establishes Fe 3 Sn 2 as an interesting platform that harbors an extraordinarily wide array of topological and correlated electron phenomena.

36 MATERIALS SCIENCE↗

Magnetic impurities on the surface of a topological insulator

The surface states of a topological insulator are described by an emergent relativistic massless Dirac equation in 2+1 dimensions. In contrast to graphene, there is an odd number of Dirac points, and the electron spin is directly coupled to the momentum. We show that a magnetic impurity opens up a local gap and suppresses the local density of states. Furthermore, the Dirac electronic states mediate an RKKY interaction among the magnetic impurities which is always ferromagnetic, whenever the chemical potential lies near the Dirac point. These effects can be directly measured in STM experiments. We also study the case of quenched disorder through a renormalization group analysis.

36 MATERIALS SCIENCE↗

Understanding the Impacts of Soil Moisture Initial Conditions on NWP in the Context of Land-Atmosphere Coupling

The role of soil moisture in NWP has gained more attention in recent years, as studies have demonstrated impacts of land surface states on ambient weather from diurnal to seasonal scales. However, soil moisture initialization approaches in coupled models remain quite diverse in terms of their complexity and observational roots, while assessment using bulk forecast statistics can be simplistic and misleading. In this study, a suite of soil moisture initialization approaches is used to generate short-term coupled forecasts over the U.S. Southern Great Plains using NASA’s Land Information System (LIS) and NASA Unified WRF (NU-WRF) modeling systems. This includes a wide range of currently used initialization approaches, including soil moisture derived from ‘off-the-shelf’ products such as atmospheric models and land data assimilation systems, high-resolution land surface model spinups, and satellite-based soil moisture products from SMAP. Results indicate that the spread across initialization approaches can be quite large in terms of soil moisture conditions and spatial resolution, and that SMAP performs well in terms of heterogeneity and temporal dynamics when compared against high resolution land surface model and in-situ soil moisture estimates. Case studies are analyzed using the local land-atmosphere coupling (LoCo) framework that relies on integrated assessment of soil moisture, surface flux, boundary layer, and ambient weather, with results highlighting the critical role of inherent model background biases. In addition, simultaneous assessment of land vs. atmospheric initial conditions in an integrated, process-level fashion can help address the question of whether improvements in traditional NWP verification statistics are achieved for the right reasons.

Southern Great Plains↗

3D Quantum Anomalous Hall Effect in Magnetic Topological Insulator Trilayers of Hundred‐Nanometer Thickness

Magnetic topological states refer to a class of exotic phases in magnetic materials with the non-trivial topological property determined by magnetic spin configurations. An example of such states is the quantum anomalous Hall (QAH) state, which is a zero magnetic field manifestation of the quantum Hall effect. Current research in this direction focuses on QAH insulators with a thickness of less than 10 nm. Here, molecular beam epitaxy (MBE) is employed to synthesize magnetic TI trilayers with a thickness of up to ≈106 nm. It is found that these samples exhibit well-quantized Hall resistance and vanishing longitudinal resistance at zero magnetic field. By varying the magnetic dopants, gate voltages, temperature, and external magnetic fields, the properties of these thick QAH insulators are examined and the robustness of the 3D QAH effect is demonstrated. The realization of the well-quantized 3D QAH effect indicates that the nonchiral side surface states of the thick magnetic TI trilayers are gapped and thus do not affect the QAH quantization. The 3D QAH insulators of hundred-nanometer thickness provide a promising platform for the exploration of fundamental physics, including axion physics and image magnetic monopole, and the advancement of electronic and spintronic devices to circumvent Moore's law.

36 MATERIALS SCIENCE↗