Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

STS-74/MIR Photogrammetric Appendage Structural Dynamics Experiment Preliminary Data Analysis

The Photogrammetric Appendage Structural Dynamics Experiment was designed, developed, and flown to demonstrate and prove measurement of the structural vibration response of a Russian Space Station Mir solar array using photogrammetric methods. The experiment flew on the STS-74 Space Shuttle mission to Mir in November 1995 and obtained video imagery of solar array structural response to various excitation events. The video imagery has been digitized and triangulated to obtain response time history data at discrete points on the solar array. This data has been further processed using the Eigensystem Realization Algorithm modal identification technique to determine the natural vibration frequencies, damping, and mode shapes of the solar array. The results demonstrate that photogrammetric measurement of articulating, nonoptically targeted, flexible solar arrays and appendages is a viable, low-cost measurement option for the International Space Station.

Gilbert, Michael G.↗
NASA NTRS1983

Effects of structural coupling on mistuned cascade flutter and response

The effects of structural coupling on mistuned cascade flutter and response are analytically investigated using an extended typical section model. This model includes both structural and aerodynamic coupling between the blades. The model assumes that the structurally coupled system natural modes were determined and are represented in the form of N bending and N torsional uncoupled modes for each blade, where N is the number of blades and, hence, is only valid for blade dominated motion. The aerodynamic loads are calculated by using two dimensional unsteady cascade theories in the subsonic and supersonic flow regimes. The results show that the addition of structural coupling can affect both the aeroelastic stability and frequency. The stability is significantly affected only when the system is mistuned. The resonant frequencies can be significantly changed by structural coupling in both tuned and mistuned systems, however, the peak response is significantly affected only in the latter.

Kielb, R. E.↗
NASA NTRS1984

Effects of structural coupling on mistuned cascade flutter and response

The effects of structural coupling on mistuned cascade flutter and response are analytically investigated using an extended typical section model. This model includes both structural and aerodynamic coupling between the blades. The model assumes that the structurally coupled system natural modes were determined and are represented in the form of N bending and N torsional uncoupled modes for each blade, where N is the number of blades and, hence, is only valid for blade dominated motion. The aerodynamic loads are calculated by using two dimensional unsteady cascade theories in the subsonic and supersonic flow regimes. The results show that the addition of structural coupling can affect both the aeroelastic stability and frequency. The stability is significantly affected only when the system is mistuned. The resonant frequencies can be significantly changed by structural coupling in both tuned and mistuned systems, however, the peak response is significantly affected only in the latter. Previously announced in STAR as N83-15672

Kielb, R. E.↗
DOE OSTI2021

Processing Effects on the Self-Assembly of Brush Block Polymer Photonic Crystals

Here,the self-assembly of poly(dimethylsiloxane)-b-poly(trimethylene carbonate) (PDMS-b-PTMC) bottlebrush block polymers was investigated under different processing conditions. Small-angle X-ray scattering (SAXS) and UV/Visible spectroscopy provided insight into the self-assembly and structure in response to heating and applied pressure. In the absence of applied pressure (i.e., before annealing), the PDMS-b-PTMC bottlebrush block polymers are white solids and adopt small, randomly oriented lamellar grains. Heating the materials to 140 °C in the absence of applied pressure appears to “lock in” the isotropic, short-range-ordered state, preventing the formation of the long-range-ordered lamellar structure responsible for photonic properties. Applying modest anisotropic pressure (3 psi) between parallel plates at ambient temperature orients the short-range lamellar grains; however, applied pressure alone does not produce long-range order. Only when the bottlebrush block polymers were heated (>100 °C) under modest pressure (3 psi) were long-range-ordered photonic crystals formed. Analysis of the SAXS data motivated analogies to liquid crystals and revealed the potential self-assembly pathway. These results provide insight into the structure and self-assembly of bottlebrush block polymers with low glass transition temperature side chains in response to different processing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Design considerations for joints in deployable space truss structures

All of the structures considered for the Control of Flexible Structures (COFS) flight experiments are deployable truss structures and their response will be dominated by the structural response of the joints. To prepare for these experiments some fundamental research work is being conducted in the Structures and Dynamics Division at LaRC which will provide insight into structurally efficient and predictable deployable truss joints. This work involves generic studies of the static and dynamic response of joints as well as the development of analytical models which can be used to predict the response of a large multijointed truss. In addition to the generic joint studies, the research effort encompasses the design and fabrication of a 20-meter long deployable truss beam for laboratory evaluation of its structural characteristics and correlation with developed prediction methods. The experimental results have indicated the importance of attention to detail in the design and fabrication of joints for deployable truss structures. The dimensional relations and material considerations for efficient pin-clevis joints have been outlined. Results of tests on the near-center latch are discussed.

Rhodes, Marvin D.↗
NASA NTRS2022

Constraining Venus and Mars Internal Structures from the Gravity Response to Atmospheric Loading

The gravity fields of celestial bodies that possess an atmosphere are periodically perturbed by the redistribution of fluid mass associated with the atmospheric dynamics. A component of this perturbation is due to the gravitational response of the body to the deformation of its surface induced by the atmospheric pressure loading. The magnitude of this effect depends on the relation between the loading and the response in terms of geopotential variations measured by the load Love numbers. In this work, we simulate and analyze the gravity field generated by the atmospheres of Venus and Mars by accounting for different models of their internal structure. By precisely characterizing the phenomena that drive the mass transportation in the atmosphere through general circulation models, we determine the effect of the interior structure on the response to the atmospheric loading. An accurate estimation of the time-varying gravity field, which measures the atmospheric contribution, may provide significant constraints on the interior structure through the measurement of the load Love numbers. A combined determination of tidal and load Love numbers would enhance our knowledge of the interior of planetary bodies, providing further geophysical constraints in the inversion of internal structure models.The gravity fields of celestial bodies that possess an atmosphere are periodically perturbed by the redistribution of fluid mass associated with the atmospheric dynamics. A component of this perturbation is due to the gravitational response of the body to the deformation of its surface induced by the atmospheric pressure loading. The magnitude of this effect depends on the relation between the loading and the response in terms of geopotential variations measured by the load Love numbers. In this work, we simulate and analyze the gravity field generated by the atmospheres of Venus and Mars by accounting for different models of their internal structure. By precisely characterizing the phenomena that drive the mass transportation in the atmosphere through general circulation models, we determine the effect of the interior structure on the response to the atmospheric loading. An accurate estimation of the time-varying gravity field, which measures the atmospheric contribution, may provide significant constraints on the interior structure through the measurement of the load Love numbers. A combined determination of tidal and load Love numbers would enhance our knowledge of the interior of planetary bodies, providing further geophysical constraints in the inversion of internal structure models.

Mars↗
NASA NTRS1992

Response of launch pad structures to random acoustic excitation

Two solutions (probabilistic and deterministic) for the random vibration problem are presented in this paper from the standpoint of their applicability to predict the response of ground structures subjected to acoustic loading during the launch of a Space Shuttle. Deficiencies of the probabilistic method, especially to predict response in the low-frequency regime, prompted the development of the deterministic analysis, which offers a valid alternative. Challenges associated with the implementation of these response solutions in a commercially available Finite Element Method (FEM) code are briefly addressed.

Margasahayam, Ravi↗
NASA NTRS2012

A Model for Simulating the Response of Aluminum Honeycomb Structure to Transverse Loading

A 1-dimensional material model was developed for simulating the transverse (thickness-direction) loading and unloading response of aluminum honeycomb structure. The model was implemented as a user-defined material subroutine (UMAT) in the commercial finite element analysis code, ABAQUS(Registered TradeMark)/Standard. The UMAT has been applied to analyses for simulating quasi-static indentation tests on aluminum honeycomb-based sandwich plates. Comparison of analysis results with data from these experiments shows overall good agreement. Specifically, analyses of quasi-static indentation tests yielded accurate global specimen responses. Predicted residual indentation was also in reasonable agreement with measured values. Overall, this simple model does not involve a significant computational burden, which makes it more tractable to simulate other damage mechanisms in the same analysis.

Ratcliffe, James G.↗
NASA NTRS1984

Research in Structures and Dynamics, 1984

A symposium on advanced and trends in structures and dynamics was held to communicate new insights into physical behavior and to identify trends in the solution procedures for structures and dynamics problems. Pertinent areas of concern were (1) multiprocessors, parallel computation, and database management systems, (2) advances in finite element technology, (3) interactive computing and optimization, (4) mechanics of materials, (5) structural stability, (6) dynamic response of structures, and (7) advanced computer applications.

Robert J Hayduk↗
DOE OSTI2025

Hybrid Bismuth Halide with Rich Polymorphism and Second Harmonic Generation Response

Hybrid structures have emerged as a promising class of optical materials, due to their ability to couple the robustness of inorganic and the tunability of organic compounds. However, their application in nonlinear optics (NLO) remains limited, largely due to underexplored factors that drive the formation of noncentrosymmetric structures and NLO property characterization. In this work, we explore the formation, structural and temperature polymorphism, and optical properties of the (Et 3 NH) 3 Bi 2 Br 9 composition, which crystallizes as either noncentrosymmetric or centrosymmetric polymorph. Structural analysis showed that the alignment of [Bi 2 Br 9 ] 3– units dictates the symmetry of phases, as well as the nonlinear optical properties, with the triclinic polymorph exhibiting a second harmonic generation (SHG) response both in visible and IR regions (1.29 × KH 2 PO 4 and 0.08 × AgGaS 2 ). Thermal analysis reveals polymorphic phase transitions and low melting points, making them melt-processable and ionic liquid candidates.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Control augmented structural synthesis with transient response constraints

An integrated approach to the optimum design of control augmented structural systems is presented in which structural variables and control variables are changed simultaneously during the design process. Constraints are imposed on peak transient dynamic displacements and accelerations, static displacements, natural frequencies, and control system effort. Side constraints imposed on structural member sizes and control system thresholds and actuator output forces insure the generation of physically meaningful designs. Example problems are presented which bring out the benefits of simultaneous treatment of both the structural design variables and the control design variables.

Manning, R. A.↗
NASA NTRS2005

Simulating Vibrations in a Complex Loaded Structure

The Dynamic Response Computation (DIRECT) computer program simulates vibrations induced in a complex structure by applied dynamic loads. Developed to enable rapid analysis of launch- and landing- induced vibrations and stresses in a space shuttle, DIRECT also can be used to analyze dynamic responses of other structures - for example, the response of a building to an earthquake, or the response of an oil-drilling platform and attached tanks to large ocean waves. For a space-shuttle simulation, the required input to DIRECT includes mathematical models of the space shuttle and its payloads, and a set of forcing functions that simulates launch and landing loads. DIRECT can accommodate multiple levels of payload attachment and substructure as well as nonlinear dynamic responses of structural interfaces. DIRECT combines the shuttle and payload models into a single structural model, to which the forcing functions are then applied. The resulting equations of motion are reduced to an optimum set and decoupled into a unique format for simulating dynamics. During the simulation, maximum vibrations, loads, and stresses are monitored and recorded for subsequent analysis to identify structural deficiencies in the shuttle and/or payloads.

Cao, Tim T.↗
DOE OSTI2023

Optimal Storage Response to Utility Tariff Structures and Potential Use of Capacity Charges

Energy storage is increasingly being deployed in behind-the-meter use cases, partially in response to falling lithium-ion prices and new utility tariff structures. Utilities are grappling with new tariff design in the presence of distributed energy resources (DER), trying to motivate, fairly price the contribution of, and, in some cases, discourage, certain operation of DER. There are opportunities for energy storage under emerging tariff structures, but utility net load management objectives for storage remain unclear. Diverse tariff structures motivate the use of energy storage to provide one or a combination of: energy arbitrage, energy shifting, solar self-consumption, and import shaving. This paper formulates a linear optimization to demonstrate the optimal storage tariff response, examining customer net load metrics under diverse utility tariff structures, such as time-of-use, net metering, feed-in tariffs, zero export tariffs, and demand charges. A key contribution of this paper is the introduction and examination of a capacity charge as mechanism that can both motivate reductions in both peak import, and exports, along with greater load levelling.

behind-the-meter↗
NASA NTRS1991

Dynamic Analyses Including Joints Of Truss Structures

Method for mathematically modeling joints to assess influences of joints on dynamic response of truss structures developed in study. Only structures with low-frequency oscillations considered; only Coulomb friction and viscous damping included in analysis. Focus of effort to obtain finite-element mathematical models of joints exhibiting load-vs.-deflection behavior similar to measured load-vs.-deflection behavior of real joints. Experiments performed to determine stiffness and damping nonlinearities typical of joint hardware. Algorithm for computing coefficients of analytical joint models based on test data developed to enable study of linear and nonlinear effects of joints on global structural response. Besides intended application to large space structures, applications in nonaerospace community include ground-based antennas and earthquake-resistant steel-framed buildings.

Belvin, W. Keith↗
NASA NTRS1995

Overview Of Structural Behavior and Occupant Responses from Crash Test of a Composite Airplane

As part of NASA's composite structures crash dynamics research, a general aviation aircraft with composite wing, fuselage and empennage (but with metal subfloor structure) was crash tested at the NASA Langley Research Center Impact Research Facility. The test was conducted to determine composite aircraft structural behavior for crash loading conditions and to provide a baseline for a similar aircraft test with a modified subfloor. Structural integrity and cabin volume were maintained. Lumbar loads for dummy occupants in energy absorbing seats wer substantially lower than those in standard aircraft seats; however, loads in the standard seats were much higher that those recorded under similar conditions for an all-metallic aircraft.

Jones, Lisa E.↗
NASA NTRS2017

Optimal Reference Strain Structure for Studying Dynamic Responses of Flexible Rockets

In the proposed paper, the optimal design of reference strain structures (RSS) will be performed targeting for the accurate observation of the dynamic bending and torsion deformation of a flexible rocket. It will provide the detailed description of the finite-element (FE) model of a notional flexible rocket created in MSC.Patran. The RSS will be attached longitudinally along the side of the rocket and to track the deformation of the thin-walled structure under external loads. An integrated surrogate-based multi-objective optimization approach will be developed to find the optimal design of the RSS using the FE model. The Kriging method will be used to construct the surrogate model. For the data sampling and the performance evaluation, static/transient analyses will be performed with MSC.Natran/Patran. The multi-objective optimization will be solved with NSGA-II to minimize the difference between the strains of the launch vehicle and RSS. Finally, the performance of the optimal RSS will be evaluated by checking its strain-tracking capability in different numerical simulations of the flexible rocket.

finite-element (FE)↗