Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “standard model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A spherical harmonics method for asteroid pole determination

A new and general method is presented for determining pole orientations of unresolved solar system bodies that exhibit brightness variation with rotation. The accuracy of the method is limited only by the number of available apparitions, which imposes the degree where the Legendre expansion must be truncated. It is shown that power spectra of lightcurves provide enough information to extract pole coordinates from the data, independent of body shape and albedo variegation. The method has been tested using several computer-generated synthetic light-curves, and the accuracy is found to be about 5 deg in both the longitude and latitude of the pole, which is considerably better than that obtained from the standard triaxial ellipsoid model. Finally, the new spherical harmonics method has been applied to six well-observed asteroids: 16 Psyche, 22 Kalliope, 39 Laetitia, 44 Nysa, 45 Eugenia, and 349 Dembowska.

Lumme, K.↗

Inelastic Strain Analysis of Solder Joint in NASA Fatigue Specimen

The solder fatigue specimen designed by NASA-GSFC/UNISYS is analyzed in order to obtain the inelastic strain history during two different representative temperature cycles specified by UNISYS. In previous reports (dated July 25, 1990, and November 15, 1990), results were presented of the elastic-plastic and creep analysis for delta T = 31 C cycle, respectively. Subsequent results obtained during the current phase, from viscoplastic finite element analysis of the solder fatigue specimen for delta T = 113 C cycle are summarized. Some common information is repeated for self-completeness. Large-deformation continuum formulations in conjunction with a standard linear solid model is utilized for modeling the solder constitutive creep-plasticity behavior. Relevant material properties are obtained from the literature. Strain amplitudes, mean strains, and residual strains (as well as stresses) accumulated due to a representative complete temperature cycle are obtained as a result of this analysis. The partitioning between elastic strains, time-independent inelastic (plastic) strains, and time-dependent inelastic (creep) strains is also explicitly obtained for two representative cycles. Detailed plots are presented for two representative temperature cycles. This information forms an important input for fatigue damage models, when predicting the fatigue life of solder joints under thermal cycling

Dasgupta, Abhijit↗

Ultraviolet observations of x ray transients

Preliminary results of new International Ultraviolet Explorer (IUE) observations of two major transient events, the April 1989 outburst of the Be star transient system A0535+26 and the remarkable May/June 1989 outburst of V404 Cygni, are discussed. The UV data for V404 Cygni, combined with contemporaneous published optical and x ray data are not satisfactorily represented by standard accretions disk models.

Shrader, Chris R.↗

The application of neural networks to the SSME startup transient

Feedforward neural networks were used to model three parameters during the Space Shuttle Main Engine startup transient. The three parameters were the main combustion chamber pressure, a controlled parameter, the high pressure oxidizer turbine discharge temperature, a redlined parameter, and the high pressure fuel pump discharge pressure, a failure-indicating performance parameter. Network inputs consisted of time windows of data from engine measurements that correlated highly to the modeled parameter. A standard backpropagation algorithm was used to train the feedforward networks on two nominal firings. Each trained network was validated with four additional nominal firings. For all three parameters, the neural networks were able to accurately predict the data in the validation sets as well as the training set.

Meyer, Claudia M.↗

Distributed structural control using multilayered piezoelectric actuators. I - Analysis

Timoshenko beam theory is applied to beams with multiple layers of piezoelectric material attached. The model is developed using a Hamiltonian approach, and includes a model of the external electrical circuits to which the piezoelectric layers are attached, as well as a complete set of boundary conditions. The resulting model is then formulated in state space, and compared to a state space model of the standard Timoshenko beam.

Cudney, H. H.↗

Plasma wave generation near the inner heliospheric shock

There is mounting evidence that the Voyager 1 and 2 and Pioneer 11 spacecraft may approach the inner (termination) heliospheric shock near the end of this century. It is argued here, by analogy with planetary bow shocks, that energetic electrons backstreaming from the heliospheric shock along the magnetic field should be unstable to the generation of Langmuir waves by the electron beam instability. Analytic expressions for the cutoff velocity, corresponding to the beam speed of the electrons backstreaming from the shock, are derived for a standard solar wind model. At the front side of the heliosphere the maximum beam velocity is expected to be at the meridian passing through the nose of the shock, which is assumed to be aligned with the Very Local Inter-Stellar Medium flow. This foreshock region and the associated Langmuir waves are relevant to both the expected in situ observations of the heliospheric boundaries, and to the low-frequency (2-3 kHz) radio emissions observed by the Voyager spacecraft in the outer heliosphere. Provided that these radio emissions are generated by Langmuir waves, the minimum Langmuir wave electric fields at the remote source are estimated to be greater than about 3 - 30 microV/m.

Macek, W. M.↗

On the application of large-eddy simulation to transitional wall-bounded flows

Large-eddy simulations of transition on a flat-plate boundary layer have been carried out. Standard residual stress models of the Smagorinsky type are excessively dissipative, but rescaling the model constant improves the prediction of the total (integrated) subgrid scale dissipation, leading to results that compare favorably with those of a direct simulation, at a small fraction of the computational effort.

Piomelli, Ugo↗

The application of neural networks to the SSME startup transient

Feedforward neural networks were used to model three parameters during the Space Shuttle Main Engine startup transient. The three parameters were the main combustion chamber pressure, a controlled parameter, the high pressure oxidizer turbine discharge temperature, a redlined parameter, and the high pressure fuel pump discharge pressure, a failure-indicating performance parameter. Network inputs consisted of time windows of data from engine measurements that correlated highly to the modeled parameter. A standard backpropagation algorithm was used to train the feedforward networks on two nominal firings. Each trained network was validated with four additional nominal firings. For all three parameters, the neural networks were able to accurately predict the data in the validation sets as well as the training set.

Meyer, Claudia M.↗

Time-dependent treatment of scattering - Integral equation approaches using the time-dependent amplitude density

The time-dependent form of the Lippmann-Schwinger integral equation is used as the basis of several new wave packet propagation schemes. These can be formulated in terms of either the time-dependent wave function or a time-dependent amplitude density. The latter is nonzero only in the region of configuratiaon space for which the potential is nonzero, thereby in principle obviating the necessity of large grids or the use of complex absorbing potentials when resonances cause long collision times (leading, consequently, to long propagation times). Transition amplitudes are obtained in terms of Fourier transforms of the amplitude density from the time to the energy domain. The approach is illustrated by an application to a standard potential scattering model problem where, as in previous studies, the action of the kinetic energy operator is evaluated by fast Fourier transform (FFT) techniques.

Hoffman, David K.↗

The ARPANET after twenty years

The ARPANET began operations in 1969 with four nodes as an experiment in resource sharing among computers. It has evolved into a worldwide research network of over 60,000 nodes, influencing the design of other networks in business, education, and government. It demonstrated the speed and reliability of packet-switching networks. Its protocols have served as the models for international standards. And yet the significance of the ARPANET lies not in its technology, but in the profound alterations networking has produced in human practices. Network designers must now turn their attention to the discourses of scientific technology, business, education, and government that are being mixed together in the milieux of networking, and in particular the conflicts and misunderstandings that arise from the different world views of these discourses.

Denning, Peter J.↗

Advanced information processing system: Inter-computer communication services

The purpose is to document the functional requirements and detailed specifications for the Inter-Computer Communications Services (ICCS) of the Advanced Information Processing System (AIPS). An introductory section is provided to outline the overall architecture and functional requirements of the AIPS and to present an overview of the ICCS. An overview of the AIPS architecture as well as a brief description of the AIPS software is given. The guarantees of the ICCS are provided, and the ICCS is described as a seven-layered International Standards Organization (ISO) Model. The ICCS functional requirements, functional design, and detailed specifications as well as each layer of the ICCS are also described. A summary of results and suggestions for future work are presented.

Burkhardt, Laura↗

A new time scale based k-epsilon model for near wall turbulence

A k-epsilon model is proposed for wall bonded turbulent flows. In this model, the eddy viscosity is characterized by a turbulent velocity scale and a turbulent time scale. The time scale is bounded from below by the Kolmogorov time scale. The dissipation equation is reformulated using this time scale and no singularity exists at the wall. The damping function used in the eddy viscosity is chosen to be a function of R(sub y) = (k(sup 1/2)y)/v instead of y(+). Hence, the model could be used for flows with separation. The model constants used are the same as in the high Reynolds number standard k-epsilon model. Thus, the proposed model will be also suitable for flows far from the wall. Turbulent channel flows at different Reynolds numbers and turbulent boundary layer flows with and without pressure gradient are calculated. Results show that the model predictions are in good agreement with direct numerical simulation and experimental data.

Yang, Z.↗

On the possibility of observing cosmic ray sources in high energy gamma rays

If cosmic rays are accelerated by strong shocks, then cosmic ray sources should be characterized by spectra, dN/dE alpha E exp -(2.0-2.2), reflecting the strength of those shocks. This is expected from the 'standard leaky box' model of cosmic ray propagation in which the source spectra are harder than the observed spectra because higher energy particles have shorter residence times in the galactic magnetic fields. Furthermore, data on cosmic ray nucleons suggest that these sources might be surrounded by material. If the latter is true, such sources should be observable in gamma rays at energies beyond 1 GeV where the angular resolution of gamma-ray telescopes is optimized and the background is significantly reduced. For identified sources, the source location accuracy can be shown to improve with increasing energy in spite of the decreasing statistics, as long as the gamma-ray spectrum is harder than dN/dE alpha E exp -gamma. A Monte Carlo model is used to predict the photon spectra which would be expected from cosmic ray sources under varying assumptions about the strength of the shocks in the acceleration region.

Ormes, J. F.↗

Goddard Conference on Mass Storage Systems and Technologies, Volume 1

Copies of nearly all of the technical papers and viewgraphs presented at the Goddard Conference on Mass Storage Systems and Technologies held in Sep. 1992 are included. The conference served as an informational exchange forum for topics primarily relating to the ingestion and management of massive amounts of data and the attendant problems (data ingestion rates now approach the order of terabytes per day). Discussion topics include the IEEE Mass Storage System Reference Model, data archiving standards, high-performance storage devices, magnetic and magneto-optic storage systems, magnetic and optical recording technologies, high-performance helical scan recording systems, and low end helical scan tape drives. Additional topics addressed the evolution of the identifiable unit for processing purposes as data ingestion rates increase dramatically, and the present state of the art in mass storage technology.

Kobler, Ben↗

Goddard Conference on Mass Storage Systems and Technologies, volume 2

Papers and viewgraphs from the conference are presented. Discussion topics include the IEEE Mass Storage System Reference Model, data archiving standards, high-performance storage devices, magnetic and magneto-optic storage systems, magnetic and optical recording technologies, high-performance helical scan recording systems, and low end helical scan tape drives. Additional discussion topics addressed the evolution of the identifiable unit for processing (file, granule, data set, or some similar object) as data ingestion rates increase dramatically, and the present state of the art in mass storage technology.

Kobler, Ben↗

An interpretation of the multipeaked structure in X-ray bursts

Some X-ray bursts from sources such as 4U/MXB 1636 - 53, 4U 1608 - 52, and possibly MXB 1727 - 34, display a multipeaked structure in the bolometric flux that is difficult to reconcile with the standard thermonuclear flash model or with the effects due to photospheric expansion and contraction. Understanding this phenomenon is important primarily because it might be due to a variable Thomson optical depth along a line of sight threading the burst-induced accretion disk corona. We explore the conditions under which these burst profiles might be observed, in light of the somewhat surprising recent results from the radiative-hydrodynamic simulation of the coronal structure. We find that double- (and triple-) peaked bursts are produced at inclination angles in the range 40-65 deg. Interestingly, the orbital information for 4U/MXB 1636 - 53 and 4U 1608 - 52 suggests i is less than 70 deg, in these sources. The orbital inclination of MXB 1728 - 34 is not yet known.

Melia, Fulvio↗

Galaxy clusters and cold dark matter - A low-density unbiased universe?

Large-scale simulations of a universe dominated by cold dark matter (CDM) are tested against two fundamental properties of clusters of galaxies: the cluster mass function and the cluster correlation function. We find that standard biased CDM models are inconsistent with these observations for any bias parameter b. A low-density, low-bias CDM-type model, with or without a cosmological constant, appears to be consistent with both the cluster mass function and the cluster correlations. The low-density model agrees well with the observed correlation function of the Abell, Automatic Plate Measuring Facility (APM), and Edinburgh-Durham cluster catalogs. The model is in excellent agreement with the observed dependence of the correlation strength on cluster mean separation, reproducing the measured universal dimensionless cluster correlation. The low-density model is also consistent with other large-scale structure observations, including the APM angular galaxy-correlations, and for lambda = 1-Omega with the COBE results of the microwave background radiation fluctuations.

Bahcall, Neta A.↗

An instability in neutron stars at birth

Calculations with a two-dimensional hydrodynamic simulation show that a generic Raleigh-Taylor-like instability occurs in the mantles of nascent neutron stars, that it is possibly violent, and that the standard spherically symmetric models of neutron star birth and supernova explosion may be inadequate. Whether this 'convective' instability is pivotal to the supernova mechanism, pulsar nagnetic fields, or a host of other important issues that attend stellar collapse remains to be seen, but its existence promises to modify all questions concerning this most energetic of astronomical phenomena.

Burrows, Adam↗