Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Properties of nickel-cadmium separators

The thickness, moisture content, exchange capacity, tensile strength, diffusion characteristics, stability, and electrical properties are discussed for the 2291 radiation-grafted separator used in military vented nickel cadmium aircraft batteries. A regression analysis of separator resistance as a function of temperature and KOH concentration is included.

Lee, J.↗

Crystallization and morphology of mordenite zeolite influenced by various parameters in organic-free synthesis

Research highlights: {yields} Seed, gel composition and silicon source affect the crystallization process of MOR. {yields} Seed, gel composition and silicon source influence the morphology of MOR. {yields} Low silica concentration results in MOR with high c/b aspect ratio. {yields} Novel nano fiber-like MOR with c/b aspect ratio of 89 was organic-free synthesized. {yields} The morphology of MOR influences its mesopore property and thermal stability. -- Abstract: A series of mordenite zeolites with different morphologies were synthesized via a facile organic-free hydrothermal route, and characterized by X-ray diffraction, scanning electron microscopy, X-ray fluorescence spectrometer and N{sub 2} adsorption-desorption techniques. Influences of synthetic parameters, including seed crystal, silicon precursor, SiO{sub 2}/Al{sub 2}O{sub 3}, Na{sub 2}O/SiO{sub 2} and H{sub 2}O/SiO{sub 2}, on mordenite crystallization were investigated systematically. It was found that mordenite zeolites with various morphologies, such as fiber-like, rod-like, prism-like and needle-like ones could be synthesized in control. Especially, novel nano fiber-like MOR crystals with high c/b aspect ratio were prepared from low silica concentration system, which was manipulated by using small initial SiO{sub 2}/Al{sub 2}O{sub 3} ratio, large H{sub 2}O/SiO{sub 2} and silicon source with slow dissolution rate. Moreover, mordenite samples with various morphologies exhibited different mesopore property and thermal stability.

36 MATERIALS SCIENCE↗

Long Baseline Neutrino Experiment (LBNE) Target Material Radiation Damage from Energetic Protons of the Brookhaven Linear Isotope Production (BLIP) Facility

In search of a low-Z pion production target for the Long Baseline Neutrino Facility (LBNF) of the Deep Underground Neutrino Experiment (DUNE) various grades of graphite were irradiated with 140-180 MeV protons to fluence up to ~6 10 20 cm -2 and irradiation temperatures in the range of 100-200oC. The objective of the irradiation experiment was to assess the radiation induced changes in the graphite onset by its interaction with energetic protons and deduce some measure of performance and survivability under the design conditions of LBNF. A multi-faceted post-irradiation evaluation was conducted to both qualify and quantify the induced material property changes. These studies included dimensional stability and thermal expansion, damage annealing via thermal cycling, high temperature post-irradiation annealing to mimic irradiation at elevated temperatures, stress-strain behavior, oxidation contribution to the postirradiation analysis, potential influence of the argon atmosphere under which irradiation took place, and lattice evolution. Dilatometry-based techniques were coupled with ultrasound-based annealing methodologies as well as DSC and TGA analyses. X-ray diffraction experiments assessed the lattice parameter changes and SEM analyses were used to study the different graphite grade structures. The multi-faceted post-irradiation evaluation, in conjunction with off-beam analyses, revealed some important facts regarding the choice of a graphite grade. Specifically, it was observed that the microstructure of a grade plays an important role in its dimensional stability. X-ray diffraction data indicated variability in basal plane spacing prior to irradiation with POCO d 002 =3.3833 Å, IG-430 d 002 =3.36814 Å and R7650 d 002 =3.37944 Å. Isotropic graphite grades such as POCO and IG-430 are confirmed to undergo microstructural shrinking under irradiation. All four irradiated graphite grades experience irradiation-induced creep leading to increased Young’s modulus with changes as high as 50% that varies with microstructure. X-ray diffraction on irradiated graphite confirmed previously made observations where under both energetic protons as well as fast neutrons of fluence > 5 10 20 cm -2 and at temperatures around 200°C acceleration of the effects on both the micro-and macrostructure is observed. Amongst the irradiated grades POCO graphite showed tendency to increase crystallinity order but also shows turbostratic state resulting from the interaction of its lattice with protons. This report presents and discusses the details of the irradiation experiment and the results of the postirradiation evaluation with main objective the assessment of the applicability and survivability of the selected four graphite grades as high-power accelerators pion production targets where the structural integrity, density reduction, dimensional and physical property stability are of paramount importance.

43 PARTICLE ACCELERATORS↗

Analysis of the Spectral Stability of the Generalized Runge–Kutta Methods Applied to Initial-Boundary-Value Problems for Equations of the Parabolic Type. I. Explicit Methods

We develop a general algorithm for the analysis the spectral stability of generalized multistage Runge–Kutta methods of various orders of accuracy as applied to the numerical integration with respect to time of an initial-boundary-value problem for the second-order parabolic equation. The expression for the function of spectral stability is obtained in two alternative forms: on the basis of matrix relations and in the determinant form. We study specific realizations of various generalized explicit Runge–Kutta methods and their spectral stability. It is shown that all explicit generalized Runge–Kutta methods possess the property of conditional spectral stability and the property of conditional monotonicity of the numerical solution in time whose violation leads to the appearance of false oscillations of the approximate solution. The stability function for these methods is polynomial. It is shown that the application of two-stage generalized explicit Runge–Kutta methods leads to the appearance of predictor-corrector-type schemes. In the case of nonstationary one-dimensional heat-conduction problem, on the basis of a one-stage generalized Runge–Kutta method, we obtain the classical two-layer conditionally stable explicit finite-difference scheme on a four-point template. It is demonstrated that the five-stage generalized Runge–Kutta–Merson method is characterized by the weakest condition of spectral stability as compared with all investigated explicit generalized Runge–Kutta methods.

42 ENGINEERING↗

Misfit strain-temperature phase diagrams and domain stability of asymmetric ferroelectric capacitors: Thermodynamic calculation and phase-field simulation

Thermodynamic calculation and phase-field simulation have been conducted to investigate the misfit strain-temperature phase diagrams, dielectric property, and domain stability of asymmetric ferroelectric capacitors (FCs), with considering the effects of dissimilar screening properties and work function steps at the two interfaces. The distinct features of asymmetric FCs from their symmetric counterparts have been revealed and discussed. Polar states with nonzero out-of-plane polarization in parallel with the built-in field are found preferential to form in asymmetric FCs. Meanwhile, the built-in field breaks the degeneracy of states with out-of-plane polarization in anti-directions. This leads to the necessity of redefining phases according to the bistability of out-of-plane polarization. Moreover, the phase stability as well as the dielectric behavior can be significantly controlled by the properties of electrodes, misfit strain, and temperature. The phase-field simulation result also shows that polydomain instability would happen in asymmetric FCs as the equivalence of domain stability in anti-directions is destroyed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mixture of Macromolecular Crowding Agents Has a Non-additive Effect on the Stability of Proteins

The folding and unfolding of proteins inside a cell take place in the presence of macromolecules of various shapes and sizes. Such crowded conditions can significantly affect folding, stability, and biophysical properties of proteins. Thus, to logically mimic the intracellular environment, the thermodynamic stability of two different proteins (lysozyme and α-lactalbumin) was investigated in the presence of mixtures of three crowding agents (ficoll 70, dextran 70, and dextran 40) at different pH values. These crowders possess different shapes and sizes. It was observed that the stabilizing effect of mixtures of crowders is more than the sum effects of the individual crowder, i.e., the stabilizing effect is non-additive in nature. Moreover, dextran 40 (in the mixture) has been found to exhibit the greatest stabilization when compared with other crowders in the mixture. In other words, the small size of the crowder has been observed to be a dominant factor in stabilization of the proteins. .

60 APPLIED LIFE SCIENCES↗

First-principles study of the surface properties of LiAl 5 O 8 : Stability and tritiated water formation

LiAl 5 O 8 is an important secondary phase of γ-LiAlO 2 ceramics in tritium ( 3 H, T)-producing burnable absorber rods (TPBARs), present in small quantities in the as-fabricated condition and in larger quantities after irradiation due to Li burnup and mobility in the radiation-damaged lattice. In this work, we performed first-principles calculations to study the stabilities and structures of LiAl 5 O 8 surfaces the possibility of T 2 O formation on the (111) surface. By calculating the surface energies of all possible symmetrical stoichiometric and nonstoichiometric low-index surfaces, we identified the two most stable surfaces, one stoichiometric (001) surface and one nonstoichiometric (111) surface in an O-rich condition. The surface oxygen atoms on the nonstoichiometric (111) surface have remarkable displacements after relaxation, due to the large dangling O bonds. Considering a Li-poor and 3 H-rich condition relevant to TPBARs, we further studied these two stable surfaces with 37.5%, 75%, and 100% surface O atoms covered by 3 H atoms. Our results show that the 3H saturation is favorable for the nonstoichiometric (111) surface but not for the stoichiometric (001) surface. In addition, the structure of nonstoichiometric (111) surface is well stabilized when the surface O atoms are 100% saturated by 3 H atoms. Based on the fully 3H-saturated (111) surface, the 3 H 2 O desorption with an energy barrier of 0.69 eV is preferable in the 3 H-rich condition.

36 MATERIALS SCIENCE↗

Band gaps and photocurrent responses of two novel alkaline earth metal(II) complexes based on 4,5-di(4′-carboxylphenyl)benzene

By using a rigid dicarboxylate ligand, 4,5-di(4′-carboxylphenyl)benzene (H{sub 2}L), two complexes formulated as SrL(DMF)(H{sub 2}O)·(CH{sub 3}CN) (DMF=N,N′-dimethylformamide) (1) and BaL(H{sub 2}O){sub 2} (2) were solvothermally synthesized and structurally characterized by single-crystal X-ray diffraction. Complexes 1 and 2 display two-dimensional (2D) layer structures. The two complexes exhibit different electrochemical and photoelectrochemical properties. Their thermal stabilities, cyclic voltammograms, UV–vis absorption and diffuse reflectance spectra and photoluminescence properties have been investigated. The band structures, the total density of states (TDOS) and partial density of states (PDOS) of the two complexes were calculated by CASTEP program. Complex 2 exhibits much higher photocurrent density than complex 1. The Mott–Schottky plots reveal that complexes 1 and 2 both are p-type semiconductors, which are in agreement with their band structure calculations. - Graphical abstract: Two alkaline earth metal(II) complexes with 2D layer structures are p-type semiconductors, they possess different band structures and density of states. And the Ba(II) complex 2 exhibits much higher photocurrent density than the Sr(II) complex 1.

36 MATERIALS SCIENCE↗

Overview of C-2 field-reversed configuration experiment plasma diagnostics

A comprehensive diagnostic suite for field-reversed configuration (FRC) plasmas has been developed and installed on the C-2 device at Tri Alpha Energy to investigate the dynamics of FRC formation as well as to understand key FRC physics properties, e.g., confinement and stability, throughout a discharge. C-2 is a unique, large compact-toroid merging device that produces FRC plasmas partially sustained for up to ∼5 ms by neutral-beam (NB) injection and end-on plasma-guns for stability control. Fundamental C-2 FRC properties are diagnosed by magnetics, interferometry, Thomson scattering, spectroscopy, bolometry, reflectometry, and NB-related fast-ion/neutral diagnostics. These diagnostics (totaling >50 systems) are essential to support the primary goal of developing a deep understanding of NB-driven FRCs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Anti-site disorder and improved functionality of Mn₂NiX (X = Al, Ga, In, Sn) inverse Heusler alloys

Recent first-principles calculations have predicted Mn₂NiX (X = Al, Ga, In, Sn) alloys to be magnetic shape memory alloys. Moreover, experiments on Mn₂NiGa and Mn₂NiSn suggest that the alloys deviate from the perfect inverse Heusler arrangement and that there is chemical disorder at the sublattices with tetrahedral symmetry. In this work, we investigate the effects of such chemical disorder on phase stabilities and magnetic properties using first-principles electronic structure methods. We find that except Mn₂NiAl, all other alloys show signatures of martensitic transformations in presence of anti-site disorder at the sublattices with tetrahedral symmetry. This improves the possibilities of realizing martensitic transformations at relatively low fields and the possibilities of obtaining significantly large inverse magneto-caloric effects, in comparison to perfect inverse Heusler arrangement of atoms. We analyze the origin of such improvements in functional properties by investigating electronic structures and magnetic exchange interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Second‐order‐transition like characteristic contributes to strain temperature stability in (K, Na)NbO 3 ‐based materials

Abstract High strain and good temperature stability are contradictory properties in (K, Na)NbO 3 (KNN)‐based materials. Herein, good temperature stability with high strain is obtained in a multiphase coexistent [ie, orthorhombic‐tetragonal (O‐T) and rhombohedral‐orthorhombic‐tetragonal (R‐O‐T)] KNN. A second‐order transition‐like characteristic should contribute to the temperature stability, in which an intrinsic lattice structure forms a bridge between them. The observed second‐order transition‐like characteristic is due to the reduced discrepancy among different lattice symmetries and a broadened temperature region for the phase transition. These integrated factors can slow the latent heat in a first‐order transition and extend it over a wide temperature region, thereby exhibiting second‐order transition‐like behavior. Correspondingly, the abrupt increase in strain near the phase transition temperature significantly slows. In addition, the appearance of pure tetragonal symmetry ( P 4 mm ) is deferred to a much higher temperature than T O‐T , in which the strain will inevitably decrease. As a result, good temperature stability with a high strain response can be realized in multiphase coexistent KNN materials, including d 33 *=448 pm/V, ‐27.5%≤fluctuation≤4.2% for O‐T, and d 33 *=446 pm/V, ‐17.5%≤fluctuation≤7.6% for R‐O‐T, over the whole temperature range 25 °C‐190 °C.

Liu, Gang↗

Microstructure and mechanical properties of bulk yttria-partially-stabilized zirconia

A commercially available bulk 4.5 mole percent yttria-(Y2O3) partially stabilized zirconia (PSZ) was studied by light microscopy, X-ray analysis, microhardness measurement, and fracture toughness testing. The growth of the precipitates and the phase transformations were studied as a function of aging in air at 1500 C. Aging curves were constructed for both the as received and the solution annealed and quenched materials; the curves showed hardness peaks at 1397 and 1517 Kg/sq mm respectively. The rectangular plate shaped tetragonal precipitates were found to have a 110 habit plane. A total of twelve different types of tetragonal precipitates were found. Grinding of the Y2O3 PSZ into powder did not cause a significant amount of metastable tetragonal precipitates to transform into the monoclinc phase, thus indicating that transformation toughening is not a significant mechanism for the material.

Valentine, P. G.↗

Microstructure and mechanical properties of bulk yttria-partially-stabilized zirconia

A commercially available bulk 4.5 mole percent yttria-Y2O3)-partially-stabilized zirconia (PSZ) was studied by light microscopy, X-ray analysis, microhardness measurement, and fracture toughness testing. The growth of the precipitates and the phase transformations were studied as a function of aging in air at 1500 C. Aging cuves were constructed for both the as-received and the solution-annealed-and-quenched materials; the curves showed hardness peaks at 1397 and 1517 kg/sq mm, respectively. A total of twelve different types of tetragonal precipitates were found. The rectangular plate-shaped tetragonal precipitates were found to have a (110) habit plane. Grinding of the Y2O3 PSZ into powder did not cause a significant amount of metastable tetragonal precipitates to transform into the monoclinic phase, thus indicating that transformation toughening is not a significant mechanism for the material. The fracture toughness of the aged and of the unaged solution-annealed-and-quenched PSZ was found to be between 2 and 3 MN/cu m/2.

Valentine, P. G.↗

Characterization of convection related defects in II-VI compound semiconductors

The research carried out under NAG8-913, 'Characterization of Convection Related Defects in II-VI Compound Semiconductors', was aimed at exploration of the potential of axial magnetic fields for melt stabilization when applied in Bridgman geometry to the growth of HgMnTe. The thrust of the work was directed at the experimental establishment of the limits of magnetic melt stabilization during crystal growth and at the analytical verification of the effects of stabilization on critical materials properties. The data obtained indicate noticeable stabilization effects, particularly as far as the formation of microscopic compositional inhomogeneities is concerned. The effects of magnetic fields on precipitate formation are found to be minor. Magnetic field effects were investigated for both 'Bridgman' and 'travelling heater' geometries. The research was conducted during the period from May 22 to September 30, 1992.

Witt, August F.↗