Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Preparation, crystal structure, and photoluminescence of Ca{sub 2}SnO{sub 4}:Eu{sup 3+}, Y{sup 3+}

Eu{sup 3+}-doped Ca{sub 2}SnO{sub 4} (solid solutions of Ca{sub 2-x}Eu{sub 2x}Sn{sub 1-x}O{sub 4}, 0{<=}x{<=}0.3) and Eu{sup 3+} and Y{sup 3+}-codoped Ca{sub 2}SnO{sub 4} (Ca{sub 1.8}Y{sub 0.2}Eu{sub 0.2}Sn{sub 0.8}O{sub 4}) were prepared by solid-state reaction at 1400 deg. C in air. Rietveld analysis of the X-ray powder diffraction patterns revealed that Eu{sup 3+} replaced Ca{sup 2+} and Sn{sup 4+} in Eu{sup 3+}-doped Ca{sub 2}SnO{sub 4}, and that Eu{sup 3+} replaced Ca{sup 2+} and Y{sup 3+} replaced Sn{sup 4+} in Ca{sub 1.8}Y{sub 0.2}Eu{sub 0.2}Sn{sub 0.8}O{sub 4}. Red luminescence at 616 nm due to the electric dipole transition {sup 5}D{sub o}{yields}{sup 7}F{sub 2} was observed in the photoluminescence (PL) spectra of Ca{sub 2-x}Eu{sub 2x}Sn{sub 1-x}O{sub 4} and Ca{sub 1.8}Y{sub 0.2}Eu{sub 0.2}Sn{sub 0.8}O{sub 4} at room temperature. The maximum PL intensity in the solid solutions of Ca{sub 2-x}Eu{sub 2x}Sn{sub 1-x}O{sub 4} was obtained for x=0.1. The PL intensity of Ca{sub 1.8}Y{sub 0.2}Eu{sub 0.2}Sn{sub 0.8}O{sub 4} was 1.26 times greater than that of Ca{sub 2-x}Eu{sub 2x}Sn{sub 1-x}O{sub 4} with x=0.1. - Graphical abstract: Rietveld analysis of the X-ray powder diffraction patterns revealed that Eu{sup 3+} replaced Ca{sup 2+} and Sn{sup 4+} in Ca{sub 2-x}Eu{sub 2x}Sn{sub 1-x}O{sub 4}, (0{<=}x{<=}0.3), and Eu{sup 3+} replaced Ca{sup 2+} and Y{sup 3+} replaced Sn{sup 4+} in Ca{sub 1.8}Y{sub 0.2}Eu{sub 0.2}Sn{sub 0.8}O{sub 4}. Red luminescence at 616 nm due to the {sup 5}D{sub o}{yields}{sup 7}F{sub 2} transition was observed in the photoluminescence spectra of these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of low loss, thermally stable Ce{sub x}Y{sub 1-x}TiTaO{sub 6} microwave ceramics

Ce{sub x}Y{sub 1-x}TiTaO{sub 6} ceramics were prepared through the solid-state ceramic route. The materials were sintered in the range 1520-1580 deg. C. The structure of the system was analyzed by X-ray diffraction and Raman spectroscopic methods. The cell parameters of solid solutions were calculated using the least square method. The microstructure was analyzed using scanning electron microscopy. The dielectric constant ({epsilon}{sub r}), temperature coefficient of resonant frequency ({tau}{sub f}) and the unloaded quality factor (Q{sub u}) are measured in the microwave frequency region using cavity resonator method. The dielectric constant increases with higher concentrations of Ce in the solid solutions. Nearly zero temperature coefficient of resonant frequency ({tau}{sub f}) was obtained for Ce{sub 0.24}Y{sub 0.76}TiTaO{sub 6}. The samples are of high quality factor and are useful electronic materials for microwave applications.

36 MATERIALS SCIENCE↗

Synthesis and photoluminescence of Ca-(Sn,Ti)-Si-O compounds

The phase relation of the compounds prepared in the CaO-SnO{sub 2}-SiO{sub 2} system at 1673 K and in the CaO-TiO{sub 2}-SiO{sub 2} system at 1573 K was investigated in order to explore new Ti{sup 4+}-activated stannate phosphors. Solid solutions of Ca(Sn{sub 1-x}Ti{sub x})SiO{sub 5} and Ca{sub 3}(Sn{sub 1-y}Ti{sub y})Si{sub 2}O{sub 9} were synthesized at x = 0-1.0 and y = 0-0.10, respectively, and their crystal structures were analyzed by powder X-ray diffraction. Photoluminescence of these solid solutions was observed in a broad range of a visible light wavelength region under ultraviolet (UV) light excitation. The peaks of the emission band of Ca(Sn{sub 0.97}Ti{sub 0.03})SiO{sub 5} and Ca{sub 3}(Sn{sub 0.925}Ti{sub 0.075})Si{sub 2}O{sub 9} were at 510 nm under excitation of 252 nm and at 534 nm under excitation of 258 nm, respectively. The absorption edges estimated by the diffuse reflectance spectra were at 300 nm (4.1 eV) for CaSnSiO{sub 5} and at 270 nm (4.6 eV) for Ca{sub 3}SnSi{sub 2}O{sub 9}, suggesting that the excitation levels in Ca(Sn{sub 1-x}Ti{sub x})SiO{sub 5} were above the band gap of the host, although the levels in Ca{sub 3}(Sn{sub 1-y}Ti{sub y})Si{sub 2}O{sub 9} were within the band gap and near the conduction band edge.

36 MATERIALS SCIENCE↗

Investigation of some new hydro(solvo)thermal synthesis routes to nanostructured mixed-metal oxides

We present a study of two new solvothermal synthesis approaches to mixed-metal oxide materials and structural characterisation of the products formed. The solvothermal oxidation of metallic gallium by a diethanolamine solution of iron(II) chloride at 240 °C produces a crystalline sample of a spinel-structured material, made up of nano-scale particles typically 20 nm in dimension. XANES spectroscopy at the K-edge shows that the material contains predominantly Fe{sup 2+} in an octahedral environment, but that a small amount of Fe{sup 3+} is also present. Careful analysis using transmission electron microscopy and powder neutron diffraction shows that the sample is actually a mixture of two spinel materials: predominantly (>97%) an Fe{sup 2+} phase Ga{sub 1.8}Fe{sub 1.2}O{sub 3.9}, but with a minor impurity phase that is iron-rich. In contrast, the hydrothermal reaction of titanium bis(ammonium lactato)dihydroxide in water with increasing amounts of Sn(IV) acetate allows nanocrystalline samples of the SnO{sub 2}–TiO{sub 2} solid solution to be prepared directly, as proved by powder XRD and Raman spectroscopy. - Graphical abstract: New solvothermal synthesis approaches to spinel and rutile mixed-metal oxides are reported. - Highlights: • Solvothermal oxidation of gallium metal in organic iron(II) solution gives a novel iron gallate spinel. • Hydrothermal reaction of titanium(IV) complex and tin(IV) acetate produces the complete SnO{sub 2}–TiO{sub 2} solid solution. • Nanostructured mixed-metal oxide phases are produced directly from solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interatomic potential to predict the favored and optimized compositions for ternary Cu-Zr-Hf metallic glasses

Under the framework of smoothed and long range second-moment approximation of tight-binding, a realistic interatomic potential was first constructed for the Cu-Zr-Hf ternary metal system. Applying the constructed potential, Monte Carlo simulations were carried out to compare the relative stability of crystalline solid solution versus its disordered counterpart over the entire composition triangle of the system (as a function of alloy composition). Simulations not only reveal that the origin of metallic glass formation but also determine, in the composition triangle, a quadrilateral region, within which metallic glass formation is energetically favored. It is proposed to define the energy differences between the crystalline solid solutions and disordered states as the driving force for amorphization and the corresponding calculations pinpoint an optimized composition locating at an composition of Cu{sub 55}Zr{sub 10}Hf{sub 35}, around which the driving force for metallic glass formation reaches its maximum, suggesting that the ternary Cu-Zr-Hf metallic glasses designed to have the compositions around Cu{sub 55}Zr{sub 10}Hf{sub 35} could be more stable than other alloys in the system. Moreover, for the Cu{sub 55}Zr{sub 10}Hf{sub 35} metallic glass, the Voronoi tessellation calculations reveal some interesting features of its atomic configurations and coordination polyhedra distribution.

36 MATERIALS SCIENCE↗

Phase Constituents of Al-rich U-Mo-Al Alloys Examined by Transmission Electron Microscopy

To supplement the understanding of diffusional interactions involving Al-rich region of the U-Mo-Al system, alloys with composition 85.7Al-11.44U-2.86Mo and 87.5Al-10U-2.5Mo in at.%, were examined to determine the equilibrium phase constituents at 500?C. These alloys were triple arc-melted, homogenized at 500?C for 200 hours, and water-quenched to preserve the high temperature microstructure. X-ray diffraction, scanning electron microscopy (SEM) with energy dispersive x-ray spectroscopy (XEDS), and transmission electron microscopy (TEM) with high angle annular dark field (HAADF) imaging via scanning transmission electron microscopy (STEM) were employed for the characterization. Alloy specimens for TEM/STEM were prepared using site-specific focused ion beam (FIB) in-situ lift-out (INLO) technique. Despite the homogenization time and temperature, five different phases, namely fcc-Al solid solution, cubic-UAl3, orthorhombic-UAl4, hexagonal-U6Mo4Al43 and diamond cubic-UMo2Al20, were observed. Based on U-Al, U-Mo and Al-Mo binary phase diagrams, previously proposed U-Mo-Al isotherms, and the solidification microstructure of these alloys, the Al-rich region of the equilibrium ternary isotherm at 500?C was constructed. The fcc-Al solid solution, orthorhombic-UAl4, and diamond cubic-UMo2Al20, which were determined to be the equilibrium phases in 85.7Al-11.44U-2.86Mo and 87.5Al-10U-2.5Mo alloys.

99 GENERAL AND MISCELLANEOUS↗

Effect of intermetallic compounds on the thermal conductivity of Ti-Cu composites

Ti films were deposited by magnetron sputtering on polycrystalline Cu substrates. The samples were annealed at different temperatures and characterized by x-ray diffraction for phase identification, scanning electron microscopy, and energy dispersive spectrometry for microstructure and composition and transient thermoreflectance for thermal conductivity and interface thermal conductance. The results showed that the diffused layer of Ti in Cu contained intermetallic compounds and solid solution of Ti in Cu. The thermal conductivity of the diffused layer is reduced, and the thickness increased for higher annealing temperature. The interface thermal conductance also decreased for higher temperature of annealing. A stable Cu{sub 4}Ti phase was formed after annealing at 725 °C with thermal conductivity of 10 W m{sup −1} K{sup −1}. The interface thermal conductance between the intermetallic compound and the solid solution of Ti in Cu also was reduced to 30 MW m{sup −2} K{sup −1}. The effective thermal resistance of the diffused layer and the interface was found to increase for higher annealing temperature.

36 MATERIALS SCIENCE↗

MoNbTaV Medium-Entropy Alloy

Guided by CALPHAD (Calculation of Phase Diagrams) modeling, the refractory medium-entropy alloy MoNbTaV was synthesized by vacuum arc melting under a high-purity argon atmosphere. A body-centered cubic solid solution phase was experimentally confirmed in the as-cast ingot using X-ray diffraction and scanning electron microscopy. The measured lattice parameter of the alloy (3.208 Å) obeys the rule of mixtures (ROM), but the Vickers microhardness (4.95 GPa) and the yield strength (1.5 GPa) are about 4.5 and 4.6 times those estimated from the ROM, respectively. Using a simple model on solid solution strengthening predicts a yield strength of approximately 1.5 GPa. In conclusion, thermodynamic analysis shows that the total entropy of the alloy is more than three times the configurational entropy at room temperature, and the entropy of mixing exhibits a small negative departure from ideal mixing.

36 MATERIALS SCIENCE↗

Formation Mechanisms and Leachability of Hexavalent Chromium in Cr{sub 2}O{sub 3}-Containing Refractory Castables of Electric Arc Furnace Cover

Cr (III)-containing refractories are widely used as electric-arc furnace cover because of their excellent corrosion resistance properties. However, the formation of hexavalent chromium [Cr(VI)] remains a matter of concern during the service and subsequent disposal of the spent refractories. Moreover, the Cr(VI) formation mechanism and total amount of Cr(VI) generated are not clearly understood. In this study, samples from different parts of a spent electric arc furnace cover were collected from a local integrated steel plant. The phase composition, microstructure, formation and leachability of Cr(VI) were investigated using X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy, and TRGS 613 leaching test (Technische Regeln für Gefahrstoffe-TRGS 613-October 2002)/multiple leaching tests. A Cr(VI)-containing phase namely CaCrO{sub 4} existed in the sample at a medium temperature range, while another Cr(VI)-containing phase namely hauyne (Ca{sub 4}Al{sub 6}CrO{sub 16}) and a Cr(III)-containing phase (Al{sub 2}O{sub 3}–Cr{sub 2}O{sub 3} solid solution) formed in the high temperature region. Concentrations of Cr(VI) in the leachates (as in the TRGS 613 procedure) exceeded the European permissible limit. During the leaching tests in an acid condition, Cr(VI) was reduced by Fe{sup 2+}, which was primarily derived from the dissolution of FeO in the samples, while more Cr(VI) leached out with distilled water. Formation of an Al{sub 2}O{sub 3}–Cr{sub 2}O{sub 3} solid solution can inhibit Cr(VI) generation.

36 MATERIALS SCIENCE↗

PAH/PAH(CF 3 ) n Donor/Acceptor Charge‐Transfer Complexes in Solution and in Solid‐State Co‐Crystals

Abstract A solution, solid‐state, and computational study is reported of polycyclic aromatic hydrocarbon PAH/PAH(CF 3 ) n donor/acceptor (D/A) charge‐transfer complexes that involve six PAH(CF 3 ) n acceptors with known gas‐phase electron affinities that range from 2.11(2) to 2.805(15) eV and four PAH donors, including seven CT co‐crystal X‐ray structures that exhibit hexagonal arrays of mixed π‐stacks with 1/1, 1/2, or 2/1 D/A stoichiometries (PAH=anthracene, azulene, coronene, perylene, pyrene, triphenylene; n= 5, 6). These are the first D/A CT complexes with PAH(CF 3 ) n acceptors to be studied in detail. The nine D/A combinations were chosen to allow several structural and electronic comparisons to be made, providing new insights about controlling D/A interactions and the structures of CT co‐crystals. The comparisons include, among others, CT complexes of the same PAH(CF 3 ) n acceptor with four PAH donors and CT complexes of the same donor with four PAH(CF 3 ) n acceptors. All nine CT complexes exhibit charge‐transfer bands in solution with λ max between 467 and 600 nm. A plot of E ( λ max ) versus [ IE (donor)− EA (acceptor)] for the nine CT complexes studied is linear with a slope of 0.72±0.03 eV eV −1 . This plot is the first of its kind for CT complexes with structurally related donors and acceptors for which precise experimental gas‐phase IE s and EA s are known. It demonstrates that conclusions based on the common assumption that the slope of a CT E ( λ max ) versus [ IE − EA ] plot is unity may be incorrect in at least some cases and should be reconsidered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variations of thermoelectric properties of Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.013}Sb{sub 0.013} materials with different Si/Sn ratios

Mg{sub 2}Si–Mg{sub 2}Sn solid solutions are a promising class of thermoelectric materials. Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.013}Sb{sub 0.013} compounds with different Si/Sn ratios were prepared by B{sub 2}O{sub 3} “flux” method followed by hot-pressing. The effect of Si/Sn ratio on the thermoelectric properties of the Mg{sub 2}Si–Mg{sub 2}Sn solid solutions at a fixed Sb doping level were measured in the temperature range 300–760 K. With the increase of Sn content (0.3≤y≤0.7), power factors are improved and lattice thermal conductivity decreased. Band convergence induced by Si/Sn ratio leads to enhanced effective mass and the materials parameter β which qualifies a kind of thermoelectric material is improved evidently. A maximum ZT of ∼1.1 at ∼760 K was achieved for the Mg{sub 2.2}Si{sub 0.3}Sn{sub 0.7–0.013}Sb{sub 0.013} sample arising from a high power factor of ∼4×10{sup -3} W m{sup −1} K{sup −2} and a low lattice thermal conductivity of ∼1.6 W m{sup −1} K{sup −1} at ∼760 K. - Graphical abstract: (a)Temperature dependence of power factor of Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.13}Sb{sub 0.013} samples. (b)Temperature dependence of lattice thermal conductivity of Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.13}Sb{sub 0.013} samples. (c)Temperature dependence of dimensionless figure of merit ZT of Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.13}Sb{sub 0.013} samples. - Highlights: • Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.013}Sb{sub 0.013} was prepared by B{sub 2}O{sub 3} ''flux'' method followed by hot-pressing. • Band convergence leads to enhanced m{sup ⁎} and improved materials parameter β. • ZT{sub max} of ∼1.1 at ∼760 K was achieved for the Mg{sub 2.2}Si{sub 0.3}Sn{sub 0.7−0.013}Sb{sub 0.013} sample.

36 MATERIALS SCIENCE↗

Oxidation/reduction studies on Zr{sub y}U{sub 1-y}O{sub 2+x} and delineation of a new orthorhombic phase in U-Zr-O system

In this communication, we report the oxidation and reduction behavior of fluorite type solid solutions in U-Zr-O. The maximum solubility of ZrO{sub 2} in UO{sub 2} lattice could be achieved with a mild oxidizing followed by reducing conditions. The role of valency state of U is more dominating in controlling the unit cell parameters than the incorporated interstitial oxygen in the fluorite lattice. The controlled oxidation studies on U-Zr-O solid solutions led to the delineation of a new distorted fluorite lattice at the U:Zr=2:1 composition. The detailed crystal structure analysis of this ordered composition Zr{sub 0.33}U{sub 0.67}O{sub 2.33} (ZrU{sub 2}O{sub 7}) has been carried from the powder XRD data. This phase crystallizes in an orthorhombically distorted fluorite type lattice with unit cell parameters: a=5.1678(2), b=5.4848(2), c=5.5557(2) A and V=157.47(1) A{sup 3} (Space group: Cmcm, No. 63). The metal ions have distorted cubical polyhedra with anion similar to the fluorite structure. The excess anions are occupied in the interstitial (empty cubes) of the fluorite unit cell. The crystal structure and chemical analyses suggest approximately equal fractions of U{sup 4+} and U{sup 6+} in this compound. The details of the thermal stability as well as kinetics of formation and oxidation of ZrU{sub 2}O{sub 7} are also studied using thermogravimetry. - Graphical abstract: Local surrounding of M ions in Zr{sub 0.33}U{sub 0.67}O{sub 2.33}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Ni Content on Double-Target Co-sputtered CrNiN Coatings

Double-target co-sputtered CrNiN coatings were deposited by DC-pulsed magnetron reactive sputtering. The nickel content increases from 0.7 to 5.0 at.% with the increased Ni target current from 0.10 to 0.40 A. The influence of Ni content on preferred orientation and properties of CrNiN coatings was investigated. The results show that the doped Ni enters CrN to form (Cr,Ni)N solid solution. CrNiN coatings are mainly composed of CrN phase and demonstrate CrN(111) preferred orientation. All the coatings present columnar growth pattern. And the less obvious the preferred orientation, the more intense competitive growth, the less sufficient the columnar growth, the finer the columnar crystal and the denser the microstructure. In spite of the most dense structure with finest grains, the hardness of CrNiN coating containing 0.7 at.% Ni is the lowest. The hardness is affected by multiple effects of preferred orientation, grain size, solid solution strengthening, morphology and stress, especially the intensity degree of preferred orientation.

36 MATERIALS SCIENCE↗

Oxide Melt Solution Calorimetry of Fe2+ -bearing Oxides and Application to the Magnetite - Maghemite (Fe3O4-Fe8/3O4) system

A consistent methodology for obtaining enthalpy of formation of Fe{sup 2+}-containing binary and multicomponent oxides using high temperature oxide melt solution calorimetry has been developed. The enthalpies of wuestite (FeO) and magnetite (Fe{sub 3}O{sub 4}) oxidation to hematite (Fe{sub 2}O{sub 3}) were measured using oxidative drop solution calorimetry in which the final product is dissolved ferric oxide. Two methods were applied: drop solution calorimetry at 1073 K in lead borate solvent and at 973 K in sodium molybdate, each under both oxygen flowing over and bubbling through the solvent, giving consistent results in agreement with literature values. The enthalpies of formation of all three iron oxides from the elements were obtained using a thermodynamic cycle involving the directly measured oxidative dissolution enthalpy of iron metal in sodium molybdate at 973 K and gave excellent consistency with literature data. The methodology was then applied to the magnetite - maghemite system. The enthalpy of mixing of the Fe{sub 3}O{sub 4}-Fe{sub 8/3}O{sub 4} spinel solid solution is exothermic and, 2 represented by a subregular (Margules) formalism, {Delta}H{sub mix} = x(1-x)(-63.36 {+-} 8.60(1-x) + 17.65 {+-} 6.40x) kJ/mol, where x is the mole fraction of magnetite. The entropies of mixing of the solid solution were calculated for different assumptions about the distribution of cations, charges, and vacancies in these defect spinels. The different models lead to only small differences in the entropy of mixing. Calculated free energies of mixing show no evidence for a solvus in the magnetite - maghemite system.

58 GEOSCIENCES↗

Evaluation of P{sub 2}O{sub 5} distribution inside the main clinker minerals by the application of EPMA method

The formation of Portland clinker phases has taken place in thermodynamically non-equilibrium state between macro-oxides CaO, SiO{sub 2}, Al{sub 2}O{sub 3}, Fe{sub 2}O{sub 3} and MgO from raw meal and P{sub 2}O{sub 5} from bone meal. The paper deals with the study of clinker minerals as solid solutions with P{sub 2}O{sub 5} during the clinkerization of raw mixture containing bone meal (BM). The ash of BM has contributed as a raw material to the formation of different clinker phases. Electron probe microanalysis (EPMA) method was used to determine the preferential distribution of P{sub 2}O{sub 5} inside calcium silicate phases and its influence upon C{sub 2}S/C{sub 3}S ratio. Basing on these results, composition of solid solution of C{sub 2}S and C{sub 3}S was established.

36 MATERIALS SCIENCE↗

Structure and scintillation yield of Ce-doped Al–Ga substituted yttrium garnet

Highlights: ► Range of Y{sub 3}(Al{sub 1−x}Ga{sub x}){sub 5}O{sub 12}:Ce solid solution crystals are grown from melt by the Czochralski method. ► Light yield of mixed crystals reaches 130% of the YAG:Ce value at x ∼ 0.4. ► ∼1% of antisite defects is formed in YGG:Ce, but no evidence of this is obtained for the rest of crystals. -- Abstract: Structure and scintillation yield of Y{sub 3}(Al{sub 1−x}Ga{sub x}){sub 5}O{sub 12}:Ce solid solution crystals are studied. Crystals are grown from melt by the Czochralski method. Distribution of host cations in crystal lattice is determined. Quantity of antisite defects in crystals is evaluated using XRD and atomic emission spectroscopy data. Trend of light output at Al/Ga substitution in Y{sub 3}(Al{sub 1−x}Ga{sub x}){sub 5}O{sub 12}:Ce is determined for the first time. Light output in mixed crystals reaches 130% comparative to Ce-doped yttrium–aluminum garnet. Luminescence properties at Al/Ga substitution are evaluated.

36 MATERIALS SCIENCE↗

Microstructure and mechanical properties of nanoscale Cu/(Ta50Nb25Mo25) multilayers

Nanoscale Cu/(Ta50Nb25Mo25) multilayers comprised of medium entropy alloy Ta50Nb25Mo25 and pure Cu are found to exhibit similar length-scale-dependent deformation mechanisms as metallic multilayers with elemental individual layers, i.e., confined layer slip at layer thickness of tens of nanometers and shear localization at several nanometers. The hardness of the nanoscale Cu/(Ta50Nb25Mo25) multilayers is higher as compared to the pure element FCC/BCC multilayers due to the extra solid solution strengthening contribution in the BCC layer. The synergy between the size effect and solid solution strengthening mechanism is discussed. In conclusion, this is an early report of the multi-component multilayers, which serves to provide directions for developing novel multilayer materials.

36 MATERIALS SCIENCE↗

Positive effect of Sc and Zr on globular microstructure formation in AA7075 thixoforming feedstock

One of methods of obtaining a fine globular microstructure in a semi-solid range, necessary for thixoforming process, is modifiers additions. For this purpose 0.5 weight percent of modifying elements-scandium and zirconium-was added to 7075 alloy. The microstructure of such alloy consisted of homogeneously distributed globular grains of solid solution with the following chemical composition: Mg - 1.9%, Al - 91.6%, Cu - 1.0%, Zn - 5.5%(all in wt.%). Quantitative metallographic analysis showed that the average grain size was 23.5 {mu}m, much smaller than in the alloy without additions and 3.08% volume fraction of precipitates in the form of a layer between spherical {alpha}(Al) grains. X-ray phase analysis of the 7075 alloy with Sc and Zr additions confirmed the dominant presence of aluminum solid solution and the intermetallic hexagonal phase MgZn{sub 2}. Electron diffraction pattern confirmed location of {eta}MgZn{sub 2} phase at the grain boundaries. EDS chemical analysis of the {eta}MgZn{sub 2} phase showed following content of elements: Mg - 17.2%, Al - 20.4%, Cu - 27.8%, Zn - 34.6%. The larger amount of Cu and Al indicated non-stoichiometry of the {eta} phase, which can be presented with a formula [Mg(Zn,Al,Cu){sub 2}]. Additionally, inside the aluminum solution, small, square-shaped precipitations enriched with Sc and Zr were observed. Electron diffraction pattern allowed identification of the precipitates as cubic Al{sub 3}(Sc,Zr) phase. The average hardness of feedstock was 105 HV5. DSC analysis during heating of the alloy enabled the estimation of a solidus line, at temperature of 548 deg. C and a liquidus line at temperature: 656 deg. C. For cooling, the temperatures for solidus and liquidus were 545 deg. C and 636 deg. C respectively. Additionally, the relation of liquid phase as a function of temperature was determined. Measurements of rheological properties in the semi-solid range, using the Searl system indicated that an increase of a particle size leads to an observable decrease of viscosity during isothermal shearing.

36 MATERIALS SCIENCE↗