Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Go slow to go fast? A review of the impacts of permitting on large-scale solar project development

State and local permitting challenges could impede the ability of large-scale solar (LSS) to meet growing electricity demand in the United States. Here, we review research that explores LSS permitting and its impacts on the pace and scale of LSS project development. Research on LSS permitting is relatively scarce, such that we support our review with research in the context of wind permitting, where appropriate. Further, few studies attempt to rigorously quantify the effects of permitting on the pace and scale of LSS project development. The available evidence allows us to identify various hypotheses and identify gaps for further research. Our review suggests that differences in permitting policies, regulations, and ordinances explain relatively little variation in LSS permitting and development outcomes across jurisdictions, except where jurisdictions implement rules designed to impede LSS. The evidence suggests LSS permitting challenges largely accrue during the implementation of permitting processes. Recent research suggests that community opposition to project development is a key driver of LSS permitting challenges, given that project opponents often use permitting processes to translate opposition into legal action. We call on future researchers to more concretely describe the LSS permitting challenge and to identify the specific actors responsible for implementing solutions.

Community opposition↗

Structural Characterization of the Molecular Events during a Slow Substrate-Product Transition in Orotidine 5'-Monophosphate Decarboxylase

Crystal structures of substrate-product complexes of Methanobacterium thermoautotrophicum orotidine 5'-monophosphate decarboxylase, obtained at various steps in its catalysis of the unusual transformation of 6-cyano-uridine 5'-monophosphate (UMP) into barbituric acid ribosyl monophosphate, show that the cyano substituent of the substrate, when bound to the active site, is first bent significantly from the plane of the pyrimidine ring and then replaced by an oxygen atom. Although the K72A and D70A/K72A mutants are either catalytically impaired or even completely inactive, they still display bending of the C6 substituent. Interestingly, high-resolution structures of the D70A and D75N mutants revealed a covalent bond between C6 of UMP and the Lys72 side chain after the -CN moiety's release. The same covalent bond was observed when the native enzyme was incubated with 6-azido-UMP and 6-iodo-UMP; in contrast, the K72A mutant transformed 6-iodo-UMP to barbituric acid ribosyl 5'-monophosphate. These results demonstrate that, given a suitable environment, native orotidine 5'-monophosphate decarboxylase and several of its mutants are not restricted to the physiologically relevant decarboxylation; they are able to catalyze even nucleophilic substitution reactions but consistently maintain distortion on the C6 substituent as an important feature of catalysis.

36 MATERIALS SCIENCE↗

A series of porous metal–organic frameworks with hendecahedron cage: Structural variation and drug slow release properties

A series of porous MOFs with hendecahedron cage-liked cavity has been constructed from the [Cu{sub 2}(COO){sub 4}] secondary building unit, H{sub 3}L (H{sub 3}L = [1,1';3',1'']Terphenyl-4,5',4''-tricarboxylic acid) and pyrazine derivatives varied with different sizes; the structural evolving of the hendecahedron cage and the application in drug delivery and controlled release were presented. - Graphical abstract: A series of porous MOFs with hendecahedron cage-liked cavity has been constructed from the [Cu{sub 2}(COO){sub 4}] secondary building unit, triangle aromatic acid ligand and pyrazine derivatives varied with different sizes; the amino-tagged hendecahedron cage shows good drug controlled release ability toward ibuprofen and guaiacol. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The growth of benzophenone crystals by Sankaranarayanan-Ramasamy (SR) method and slow evaporation solution technique (SEST): A comparative investigation

Highlights: Black-Right-Pointing-Pointer Benzophenone single crystal was grown by Sankaranarayanan-Ramasamy method which has the sizes of 1060 mm length and 55 mm diameter for the first time. Black-Right-Pointing-Pointer The conventional and SR-grown benzophenone crystals were characterized and compared using HRXRD, etching, laser damage threshold, microhardness, UV-transmittance, birefringence and dielectric analysis. Black-Right-Pointing-Pointer The SR-grown benzophenone crystal has higher LDT, microhardness, transparency, dielectric permittivity, birefringence and lower FWHM, EPD, dielectric loss than the crystal grown by conventional method. Black-Right-Pointing-Pointer The probable reason for higher crystalline perfection in SR-grown crystal was discussed. -- Abstract: Longest unidirectional Left-Pointing-Angle-Bracket 1 0 0 Right-Pointing-Angle-Bracket benzophenone (BP) crystal having dimension of 1060 mm length and 55 mm diameter was grown by Sankaranarayanan-Ramasamy method. The growth rate was measured by monitoring the elevation of the crystal-solution interface at different temperatures. The high resolution X-ray diffraction and etching measurements indicate that the unidirectional grown benzophenone crystal has good crystalline perfection and less density of defects. The optical damage threshold of SEST and SR grown BP crystals has been investigated and found that the SR grown benzophenone crystal has higher laser damage threshold value than the conventional method grown crystal. Microhardness measurement shows that crystals grown by SR method have a higher mechanical stability than the crystals grown by SEST method. Dielectric permittivity and birefringence are high in SR grown crystal compared to SEST grown BP crystal. The UV-vis-NIR results show that SR method grown crystal exhibits 7% higher transmittance as against crystals grown by conventional method.

36 MATERIALS SCIENCE↗

Determination of the parahydrogen fraction in a liquid hydrogen target using energy-dependent slow neutron transmission

In this study, the NPDGamma collaboration is performing a measurement of the very small parity-violating asymmetry in the angular distribution of the 2.2 MeV γ-rays from the capture of polarized cold neutrons on protons (A γ ). The estimated size of A γ is 5×10 -8 , and the measured asymmetry is proportional to the neutron polarization upon capture. Since the interaction of polarized neutrons with one of the two hydrogen molecular states (orthohydrogen) can lead to neutron spin-flip scattering, it is essential that the hydrogen in the target is mostly in the molecular state that will not depolarize the neutrons (≥99.8% parahydrogen). For that purpose, in the first stage of the NPDGamma experiment at the Los Alamos Neutron Science Center (LANSCE), we operated a 16-l liquid hydrogen target, which was filled in two different occasions. The parahydrogen fraction in the target was accurately determined in situ by relative neutron transmission measurements. The result of these measurements indicate that the fraction of parahydrogen in equilibrium was 0.9998±0.0002 in the first data taking run and 0.9956±0.0002 in the second. We describe the parahydrogen monitor system, relevant aspects of the hydrogen target, and the procedure to determine the fraction of parahydrogen in the target. In addition, assuming thermal equilibrium of the target, we extract the scattering cross-section for neutrons on parahydrogen.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Demonstration of a Single-Crystal Reflector-Filter for Enhancing Slow Neutron Beams

The cold polycrystalline beryllium reflector-filter concept has been used to enhance the cold neutron emission of cryogenic hydrogen moderators, while suppressing the intermediate wavelength and fast neutron emission at the same time. While suppressing the fast neutron emission is often desired, the suppression of intermediate wavelength neutrons is often unwelcome. It has been hypothesized that replacing the polycrystalline reflector-filter concept with a single-crystal reflector-filter concept would overcome the suppression of intermediate wavelength neutrons and thereby extend the usability of the reflector-filter concept to shorter but still important wavelengths. In this paper we present the first experimental data on a single-crystal reflector-filter and compare experimental results with hypothesized performance. We find that a single-crystal reflector-filter retains the long-wavelength benefit of the polycrystalline reflector-filter, without suffering the same loss of important intermediate wavelength neutrons. Ultimately, this finding extends the applicability of the reflector-filter concept to intermediate wavelengths, and furthermore indicates that the reflector-filter benefits arise from its interaction with fast (background) neutrons, not with intermediate wavelength neutrons of potential interest in many types of neutron scattering.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Commercial aluminum powders, Part I: Particle size characterization and slow heating rate thermal analysis.

We characterized nine commercial aluminum (Al) powders using several methods to measure particle characteristics and thermal analysis, with the goal to understand how these parameters influence energy release. Although it is well-known that lot-to-lot variations in commercial nanoparticles are common, the Al powders were more heterogeneous than anticipated – both with regards to particle size distributions and impurities. Manufacturer specifications – often quoted in the literature without confirmation – were not always accurate for the specific sample lots we investigated. In several cases, different conclusions could be drawn from individual particle size techniques; a combination of multiple techniques provides a clearer picture of the powder properties. Thorough characterization of Al powders is required prior to interpretation of experimental results from a variety of applications. In particular, previous studies have shown contradictory results on the influence of Al on detonation performance, perhaps partially due to insufficient characterization of the Al powders themselves.

36 MATERIALS SCIENCE↗

Is a Prescribed Fire Sufficient to Slow the Spread of Woody Plants in an Infrequently Burned Grassland? A Case Study in Tallgrass Prairie

In many mesic grasslands, such as the central Great Plains in North America, frequent fire is a key regulator of ecological processes. Long periods of infrequent fire facilitate the conversion of herbaceous-dominated grassland to woody-dominated shrubland or woodland. At the Konza Prairie Biological Station in northeast Kansas, one infrequently burned portion of the landscape has undergone transformation from grassland to woodland after nearly 30 yr without fire. In Spring 2017, a prescribed burn was implemented to assess fire effectiveness on woody plant mortality. A postfire census of 3 000+ individual woody plants identified the distribution of species by size (height), topographic position, and slope on the landscape. Mortality and canopy fire damage were calculated for each individual. In lowland locations with near-continuous shrub cover (30.7% of the landscape), woody plants were unaffected by fire. However, in upland and slope locations, where shrubs and trees were sparser, survival probability varied by topographic position and species. In these locations 68% of all woody individuals experienced 90% or greater fire damage to the canopy, with 56% of these individuals exhibiting new canopy regrowth within 2 mo after the fire. Here, the two most abundant woody shrubs, Cornus drummondii and Rhus aromatica, showed high survival at all height classes and landscape positions. The two abundant tree species, Gleditsia triacanthos and Juniperus virginiana, showed increased survival probability with tree height that varied by landscape position. Survival of J. virginiana also varied according to proximity and size of neighboring clonal shrubs, providing a mechanism for persistence of this fire-sensitive tree species even at small height classes. The probability survival curves developed here are useful for managers assessing when to prescribe fire to maximize mortality for J. virginiana and provide insight relevant for broader ecological understanding of woody encroachment within grasslands throughout the world.

54 ENVIRONMENTAL SCIENCES↗

Root litter decomposition slows with soil depth

Even though over half of the world's soil organic carbon (SOC) is stored in subsoils (>20 cm deep), and the old ages of subsoil OC indicate its cycling differs from surface SOC, there are few studies examining in situ decomposition processes in deep soils. Here, we added 13C-labeled fine roots to 15, 55, and 95 cm depths of a well-characterized coniferous forest Alfisol and monitored the amount of root-derived C remaining over 6, 12, and 30 months. We recovered the root-derived C in microbial phospholipid fatty acids (PLFAs) after 6 months and in coarse (>2 mm) particulate, fine (<2 mm) particulate, and dense, mineral-associated pools after 6, 12, and 30 months. Overall, root decomposition in the first 6 months was similar among all depths but significantly diverged at 30 months with faster decomposition at 15 cm than at 95 cm. There were more fungal and Gram negative-associated PLFAs at 15 cm than at 95 cm, and13C analysis revealed those microbial groups preferred the added root carbon to native SOC. Mineral-associations were not the cause of slower decomposition at depth because similar amounts of applied root C was recovered in the dense fraction at all depths. The largest difference among depths was in the amount of root C recovered in the coarse particulate fraction, which was greater at 95 cm (50%) than at 15 cm (15%). Slower decomposition of the particulate pool at depth likely contributed to the increase in C:N ratios and depletion of δ13C values below 60 cm depth in our soil profiles. Simulations of these soils using the CORPSE model, which incorporates microbial priming effects and mineral stabilization of SOC, reproduced patterns of particulate and mineral-associated SOC over both time and depth and suggested that a lack of priming by root exudates at depth could account for the slower decomposition rate of particulate root material. Decomposition of deep particulate SOC may increase if root exudation or dissolved OC transport to depth increases.

13C↗