SEARCH · Engineering Papers

Results for “shock initiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Integrated TBC/EBC for SiC Fiber Reinforced SiC Matrix Composites for Next Generation Gas Turbines (Final Report)

In this ambitious project, a significant challenge preventing widespread use of ceramic matrix composites in hot section components of gas power generating turbines was addressed. Hot section components made from SiC fiber reinforced SiC matrix composites (SiC/SiC composites), have the potential to achieve a combined cycle energy efficiency of above 65%. To achieve this efficiency, the temperature of the combustion gases on the turbine component surface is expected to reach as high as ~1700ºC (3100ºF). However, SiC/SiC composites suffer from volatilization at high temperature under high velocity steam environment – typical in a turbine hot chamber. This integrated collaborative project, between two research groups at Clemson University and a team of engineers and scientists at GE Gas Power, focused on design, fabrication and evaluation of a new graded environmental barrier coating. Using the excellent compositional tailorability of polymer derived ceramics (PDCs), we developed an integrated EBC/BC that smoothly transitions from bottom SiC/SiC bond interface to hermetic sesquioxide (Y 2 O 3 ) top surface. This smooth compositional transition avoided the sharp CTE mismatch at interfaces to greatly reduce the thermal stress. The developed EBC is compatible with and bonds well with the bond coat that GE uses. The top hermetic oxide surface ensures low oxygen transportation and volatilization rates under the high velocity steam environment. The graded microstructure with increasing sesquioxide concentration also decreases the amount of Si and C elements near the top hermetic sesquioxide layer. Coatings made using a process suitable for manufacturing – atmospheric plasma spraying was demonstrated. The microstructure of coatings made using this process were fully characterized. Finally, the performance of these coatings was investigated under the most demanding conditions for this application. Specifically, high temperature, high velocity steam exposure; thermal shock test; and thermal cycling tests. The graded coatings performed exceptionally well in all these tests. Specific suggestions for future development in this area have also been identified. In addition to the excellent technical progress, this project helped initiate a robust collaboration between the research groups at Clemson and GE Gas Power. It also provided a high-quality learning and mentoring opportunity for the three post-doctoral research associates and two UG students at Clemson University who worked on this project. All proposed tasks, sub-tasks were completed, and all milestones achieved.

03 NATURAL GAS↗

NASA NTRS1972

Arc driver operation for either efficient energy transfer or high-current generator

An investigation is made to establish predictable electric arcs along triggered paths for research purposes, the intended application being the heating of the driver gas of a 1 MJ electrically driven shock tube. Trigger conductors consisting of wires, open tubes, and tubes pressurized with different gases were investigated either on the axis of the arc chamber or spiraled along the chamber walls. Design criteria are presented for successful arc initiation with reproducible voltage-current characteristics. Results are compared with other facilities and several application areas are discussed.

Dannenberg, R. E.↗

NASA NTRS1978

Direct numerical solution of the transonic perturbation integral equation for lifting and nonlifting airfoils

The linear transonic perturbation integral equation previously derived for nonlifting airfoils is formulated for lifting cases. In order to treat shock wave motions, a strained coordinate system is used in which the shock location is invariant. The tangency boundary conditions are either formulated using the thin airfoil approximation or by using the analytic continuation concept. A direct numerical solution to this equation is derived in contrast to the iterative scheme initially used, and results of both lifting and nonlifting examples indicate that the method is satisfactory.

Nixon, D.↗

NASA NTRS1991

Computation of steady and unsteady compressible quasi-axisymmetric vortex flow and breakdown

The unsteady, compressible Navier-Stokes equations are used to compute and analyze compressible quasi-axisymmetric isolated vortices. The Navier-Stokes equations are solved using an implicit, upwind, flux-difference splitting finite-volume scheme. The developed three-dimensional solver has been verified by comparing its solution profiles with those of a slender, quasi-axisymmetric vortex solver for a subsonic, isolated quasi-axisymmetric vortex in an unbounded domain. The Navier-Stokes solver is then used to solve for a supersonic quasi-axisymmetric vortex flow in a configured circular duct. Steady and unsteady vortex-shock interactions and breakdown have been captured. The problem has also been calculated using the Euler solver of the same code and the results are compared with those of the Navier-Stokes solver. The effect of the initial swirl has been tentatively studied.

Kandil, Osama A.↗

NASA NTRS1995

The anomalous nuclear component in the three-dimensional heliosphere

The anomalous nuclear component is neither of solar nor galactic cosmic ray origin. Its presence in the heliosphere is an independent probe for both interplanetary electrodynamical investigations--especially solar modulation--and probably the most direct means for determining the elemental and isotopic composition of those neutral atoms in the local interstellar medium that have high first ionization potentials (e.g., He, N, O, Ne, Ar, etc.). This report is a brief account of the evolution of our knowledge of this component for readers not specializing in the subject. Included are the initial discoveries of the component, its composition, spectra, heliospheric radial and latitudinal intensity gradients, modulation over the approximately 22 year solar magnetic cycle, trapping in the magnetosphere and its use for estimating the location of a heliospheric termination shock. Recent measurements from the ULYSSES spacecraft have provided conclusive evidence that incoming neutral atoms, after photoionization by solar uv, are picked up by the solar wind, thus lending support for the concept that after their acceleration--probably at a termination shock--they return to the inner heliosphere as pseudo-cosmic rays. ULYSSES spacecraft investigations extending to approximately 56 deg south latitude reveal, for both the anomalous nuclear component and the galactic cosmic rays, that there is a surprisingly small latitudinal intensity gradient. Thus, for the current phase of the solar cycle, modulation is much more spherically symmetric in the inner solar system than had generally been believed. A further surprise is the continual presence of approximately 26 day recurrent modulation at hight latitudes, without corresponding magnetic field compressions. These results are changing our ideas and requiring modification of our models for solar modulation in three dimensions.

Simpson, J. A.↗

NASA NTRS1996

Interplanetary and Interstellar Dust Particles: Reentry Heating and Capture in Aerogel

Studies of interplanetary and interstellar dust can provide significant information on the evolution of the solar system or stars, respectively. However, for reliable analysis it is crucial to know how the particles have been modified during reentry (in the case of interplanetary dust particles, or [DP's) and impact into the capture medium. In the case of stratospheric capture, particles will be heated by atmospheric drag. Subsequent capture of the particles will result in heating, ablation, accretion of the capture medium and possible fragmentation. Modeling of these processes is a useful way of assessing their effects on the interpretation of the compositional data for these particles. Previous work on reentry heating has shown that heat diffusion alone cannot adequately account for temperature gradients observed in IDP's. In fact, for any reasonable thermal parameters, calculations show the particles to be nearly isothermal. Here we extend those studies to include phase transitions. These preliminary results are promising and show a significant temperature gradient for a 100 micron (diameter) particle. The actual capture of the particles in silica aerogel is being modeled using a comprehensive shock hydrodynamic code (called CTH). Various options of this code were investigated to attempt to make the most appropriate choice of methods of impact, equations of state, and processes of energy transfer from capture material to particle. The initial calculations with the code used only 'reasonable' estimates for the physical parameters of silica aerogel. Through the literature searches and personal contacts with the knowledgeable scientists, the best possible mechanical and thermal data have been made available for these computations.

Szydlik, Paul P.↗

DOE OSTI2022

Characterization of a new ultra-high pressure shock tube facility for combustion and propulsion studies

A new shock tube facility has been designed, constructed, and characterized at the University of Central Florida. This facility is capable of withstanding pressures of up to 1000 atm, allowing for combustion diagnostics of extreme conditions, such as in rocket combustion chambers or in novel power conversion cycles. For studies with toxic gas impurities, the high initial pressures required the development of a gas delivery system to ensure the longevity of the facility and the safety of the personnel. Data acquisition and experimental propagation were implemented with remote access to ensure safety, paired with a LabVIEW- and Python-based user interface. Thus far, test pressures of 270 atm, blast pressures of 730 atm, and temperatures approaching 10 000 K have been achieved. The extreme limitations of this facility allow for emission spectroscopy to be performed during the oxidation of fuel mixtures, e.g., alkanes diluted in argon and carbon dioxide. Ignition delay times were determined and compared to simulations using chemical kinetic mechanisms. The design, experimental procedures, processes of analysis, and uncertainty determination are outlined, and typical pressure profiles are compared with a new gas dynamics solver and empirical correlations developed across multiple shock tube facilities. Preliminary reactive mixture analyses are included with further investigation of the mixtures outlined.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Soliton Generation in Negative Thermal Expansion Materials

Strain solitons have been observed statically in several 2D materials and dynamically in substrate materials using ultrafast laser pulses. The latter case relies on lattice relaxation in response to ultrafast heating in a light-absorbing transducer material, a process which is sensitive to the thermal expansion coefficient. Here we consider an unusual case where the sign of the thermal expansion coefficient is negative, a scenario which is experimentally feasible in light of rapid and recent advances in the discovery of negative thermal expansion materials. We present numerical solutions to a nonlinear differential equation which has been repeatedly demonstrated to quantitatively model experimental data and discuss the salient results using realistic parameters for material linear and nonlinear elasticity. The solitons that emerge from the initial value problem with negative and positive thermal expansion are qualitatively different in several ways. The new case of negative thermal expansion gives rise to a nearly-periodic soliton train with chirped profile and free of an isolated shock front. We suggest this unanticipated result may be realized experimentally and assess the potential for certain applications of this generic effect.

36 MATERIALS SCIENCE↗

NASA NTRS1994

Analysis of data from the plasma composition experiment on the International Sun-Earth Explorer (ISEE 1)

The Lockheed plasma composition experiment on the ISEE 1 spacecraft has provided one of the largest and most varied sets of data on earth's energetic plasma environment, covering both the solar wind, well beyond the bow shock, and the near equatorial magnetosphere to a distance of almost 23 earth radii. This report is an overview of the last four years of data analysis and archiving. The archiving for NSSDC includes most data obtained during the initial 28-months of instrument operation, from early November 1977 through the end of February 1980. The data products are a combination of spectra (mass and energy angle) and velocity moments. A copy of the data user's guide and examples of the data products are attached as appendix A. The data analysis covers three major areas: solar wind ions upstream and downstream of the day side bowshock, especially He(++) ions; terrestrial ions flowing upward from the auroral regions, especially H(+), O(+), and He(+) ions; and ions of both solar and terrestrial origins in the tail plasma sheet and lobe regions. Copies of publications are attached.

Lennartsson, O. W.↗

NASA NTRS1995

Small scales formation via Alfven wave propagation in compressible nonuniform media

In weakly dissipative media governed by the magnetohydrodynamics (MHD) equations, any efficient mechanism of energy dissipation requires the formation of small scales. The possibility to produce small scales has been studied by Malara et al. in the case of MHD disturbances propagating in an incompressible and inhomogeneous medium, for a strictly 2D geometry. We extend the work of Malara et al. to include both compressibility and the third component for vector quantities. Using numerical simulations we show that, when an Alfven wave propagates in a compressible nonuniform medium, the two dynamical effects responsible for the small scales formation in the incompressible case are still at work: energy pinching and phase-mixing. Moreover, the interaction between the initial Alfven wave and the inhomogeneity gives rise to the formation of compressible perturbations (fast and slow waves or a static entropy wave). Some of these compressive fluctuations are subject to the steepening of the wave front and become shock waves, which are extremely efficient in dissipating their energy, their dissipation being independent of the Reynolds number. A rough estimate of the typical times which the various dynamical processes take to produce small scales and then to dissipate the energy show that these times are consistent with those required to dissipate inside the solar corona the energy of Alfven waves of photospheric origin.

Malara, F.↗

NASA NTRS2019

Cluster Analysis of Spectroscopic Line Profiles and EUV Emission in RMHD Simulations and Observations of the Solar Atmosphere

Spatially-resolved observations from the IRIS, SDO/AIA, and other space mission and ground-based telescopes, coupled with realistic 3D RMHD simulations, are a powerful tool for analysis of processes in the solar atmosphere. To better understand the dynamical and thermodynamic properties in the simulation data and their connection to observations, it is essential to determine similarities in the behaviors of the synthesized and observed emission. However, the complexity of observational data and physical processes makes comparison of observations and modeling results difficult. In this work, we show the initial results of application of K-Means clustering (unsupervised machine learning) algorithm to two different problems: 1) recognition of the typical spectroscopic line profiles observed by IRIS during solar flares and their typical dynamic behavior; 2) recognition of shocks and heating events in synthetic AIA emission data obtained from StellarBox quiet-Sun simulations. The average silhouette width technique for the KMeans algorithm is utilized in different ways to obtain optimal numbers of clusters. We discuss application of the emission clustering to visualizations of the computational volume, understanding its evolutionary trends and behavior patterns, and inversion (reconstruction) of physical properties of the solar atmosphere from synthesizes emission data.

Sadykov, Viacheslav↗

NASA NTRSDate not supplied

An Assessment of Turbulence Models for MSR Sample Retrieval Lander Aerothermal Design

Several cases from past entries in the T9 and T5 hypersonic test facilities are examined using various turbulence models and shock-layer thermochemistries with the objectives of verifying/validating turbulence models and determining appropriate multiplicative factors on predicted turbulent heating for use in aerothermal design of the heatshield of the Sample Retrieval Lander (SRL) of the Mars Sample Return (MSR) Flagship mission. The zero-equation turbulence models of Baldwin-Lomax and Cebeci-Smith are shown to replicate measurements to within experimental uncertainty for the T9 cases. For T5 cases, the zero-equation model of Baldwin-Lomax can also replicate measurements provided the shock-layer thermochemistry is modified. The modified thermochemistry resolves a dichotomy from past CFD that required different wall catalycity assumptions in the laminar and turbulent flow regimes. The present work shows that such assumptions are not necessary. Finally, an initial estimate for a multiplicative factor on turbulent heating is estimated for the SST turbulence model – the chosen model for SRL aerothermal design simulations.

Mars entry↗

NASA NTRS1988

A Three-Dimensional, Time-Dependent Numerical Modeling of Super-Sonic, Super-Alfvenic MHD Flow

A three-dimensional, time-dependent, MHD disturbance propagating through a steady inhomogeneous MHD flow is analyzed by a numerical model based on the Lax-Wendroff finite difference method. The initial steady MHD flow is assumed to be supersonic and super-Alfvenic. The background steady MHD flow is obtained by dropping the time-dependent terms in the unsteady MHD equations. A transient MHD disturbance corresponding to a MHD shock is generated at the lower radial boundary surface. The resulting development and propagation of 3-D MHD disturbances interacting with the background steady MHD flow are numerically simulated in this first application to the field of interplanetary physics. Detailed descriptions of the mathematical formulation and numerical methodology are presented. Example computations are performed to demonstrate the validity of the formulation and the capabilities of the model.

Han, S. M.↗

NASA NTRS1991

Multi-Dimensional ENO Schemes for General Geometries

A class of ENO schemes is presented for the numerical solution of multidimensional hyperbolic systems of conservation laws in structured and unstructured grids. This is a class of shock-capturing schemes which are designed to compute cell-averages to high order accuracy. The ENO scheme is composed of a piecewise-polynomial reconstruction of the solution form its given cell-averages, approximate evolution of the resulting initial value problem, and averaging of this approximate solution over each cell. The reconstruction algorithm is based on an adaptive selection of stencil for each cell so as to avoid spurious oscillations near discontinuities while achieving high order of accuracy away from them.

Harten, Ami↗

NASA NTRS1994

Theoretical calculations of ion acceleration in the vicinity of comet Giacobini-Zinner

Ionization of cometary neutral molecules produces ions which are picked up by the solar wind. The cometary ion pickup process for comet Giacobini-Zinner is studied in two ways: (1) with a test particle method in which trajectories are numerically calculated for several thousand ions whose initial locations were chosen randomly with probability proportional to the neutral density and (2) with a quasi-linear diffusion model. The cometary ion distribution function was calculated with the test particle model at several locations upstream of the bow shock and for several types of magnetic fluctuations (or waves). These waves were allowed to propagate in both directions along the magnetic field at the Alfven speed. Both pitch angle scattering and energy diffusion are evident in the derived ion distributions. The monochromatic waves result in less ion acceleration than turbulent fluctuations with about the same amplitude. The calculated ion distribution functions are in reasonable agreement with the distributions measured in the vicinity of comet Giacobini-Zinner in 1985 by particle detectors on the ICE spacecraft when the ratio of power in sunward propagating Alfven waves to the power in antisunward propagating waves is assumed to lie between about 20% and 50%. However, the quasi-linear diffusion model results agree best with the measured distribution functions when the power ratio is only about 3 percent.

Mckenzie, M. L.↗

NASA NTRS1995

Species measurements in a hypersonic, hydrogen-air, combustion wake

A continuously sampling, time-of-flight mass spectrometer has been used to measure relative species concentrations in a two-dimensional, hydrogen-air combustion wake at mainstream Mach numbers exceeding 5. The experiments, which were conducted in a free piston shock tunnel, yielded distributions of hydrogen, oxygen, nitrogen, water and nitric oxide at stagnation enthalpies ranging from 5.6 MJ kg(exp -1) to 1.2 MJ kg(exp -1) and at a distance of approximately 100 times the thickness of the initial hydrogen jet. The amount of hydrogen that was mixed in stoichiometric proportions was approximately independent of the stagnation enthalpy, in spite of the fact that the proportion of hydrogen in the wake increased with stagnation enthalpy. Roughly 50 percent of the mixed hydrogen underwent combustion at the highest enthalpy. The proportion of hydrogen reacting to water could be approximately predicted using reaction rates based on mainstream temperatures.

Skinner, K. A.↗

NASA NTRS2002

Cancer Risk-Assessment of Radiation Damage in Ataxia Telangiectasia Heterozygous Human Breast Epithelial Cell Cultures

This paper describes the study of the markers of cellular changes that are found during the onset of carcinogenesis. Several of the biological factors are markers of stress response, oncoprotein expression, and differentiation factors. Oxidative stress response agents such as heat shock proteins (HSPs) protect cells from oxidative stresses such as ionizing radiation. The onocoprotein HER-2/neu, a specific breast cancer marker, indicates early onset of cancer. Additional structural and morphogenetic markers of differentiation were considered in order to determine initial cellular changes at the initial onset of cancer. As an additional consideration, all-trans retinoic acid (RA), a differentiation agent, was considered because of its known role in regulating normal differentiation and inhibiting tumor proliferation via specific nuclear receptors. This paper discusses study and results of the preliminary analyses of gamma irradiation of AT heterozygous human breast epithelial cells (WH). Comparisons are also made of the effects various RA concentrations post-irradiation.

Lisa C. Applewhite↗

NASA NTRS2011

Heliocentric Distance of Coronal Mass Ejections at the Time of Energetic Particle Release: Revisiting the Ground Level Enhancement Events of Solar Cycle 23

Using the kinematics of coronal mass ejections (CMEs), onset time of soft X-ray flares, and the finite size of the pre-eruption CME structure, we derive the heliocentric distan~e at which the energetic particles during the ground level enhancement (GLE) events of Solar Cycle 23. We find that the GLE particles are released when the CMEs reach an average heliocentric distance of approx.3.25 solar radii (Rs). From this we infer that the shocks accelerating the particles are located at similar heights. Type II radio burst observations indicate that the CMEs are at much lower distances (average approx.1.4 Rs) when the CME-driven shock first forms. The shock seems to travel approx.1.8 Rs over a period of approox.30 min on the average before releasing the GLE particles. In deriving these results, we made three assumptions that have observational support: (i) the CME lift off occurs from an initial distance of about 1.25 Rs; (ii) the flare onset and CME onset are one and the same because these are two different manifestations of the same eruption; and (iii) the CME has positive acceleration from the onset to the first appearance in the coronagraphic field of view (2.5 to 6 Rs). Observations of coronal cavities in eclipse pictures and in coronagraphic images justify the assumption (i). The close relationship between the flare reconnection magnetic flux and the azimuthal flux of interplanetary magnetic clouds justify assumption (ii) consistent with the standard model (CSHKP) of solar eruption. Coronagraphic observations made close to the solar surface indicate a large positive acceleration of CMEs to a heliocentric distance of approx.3 Rs before they start slowing down due to the drag force. The inferred acceleration (approx.1.5 km/s/s) is consistent with reported values in the literature.

Gopalswamy, Natchimuthuk↗