Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shift current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Steep-slope field-effect transistors with AlGaN/GaN HEMT and oxide-based threshold switching device

We report the demonstration of a steep-slope field-effect transistor with AlGaN/GaN MIS-HEMTs employing SiO 2 -based threshold switching devices in series with the source. The SiO 2 -based threshold switching devices exhibited steep slope when changing resistance states. The integrated steep-slope transistor showed a low subthreshold swing of sub-5 mV/dec with a transition range of over 10 5 in the transfer characteristics in both sweep directions at room temperature, as well as the low leakage current (10 -5 μA μm -1 ) and a high I ON /I OFF ratio (>10 7 ). Moreover, with the SiO 2 -based threshold switching devices we also observed a positive shift of threshold voltages of the integrated device. Results from more than 50 transfer characteristics measurements also indicate the good repeatability and practicability of such a steep-switching device, where the average steep slopes are below 10 mV/decade. In conclusion, this steep-slope transistor with oxide-based threshold switching devices can be further extended to various transistor platforms like Si and III–V and are of potential interest for the development of power switching and high frequency devices.

36 MATERIALS SCIENCE↗

Negative plasma potential in a multidipole chamber with a dielectric coated plasma boundary

Negative plasma potentials with respect to a grounded wall that was coated with a dielectric have been achieved in an electropositive plasma confined by a multidipole device. A Langmuir probe was used to measure the density and temperatures of the bi-Maxwellian distribution electrons and an emissive probe was used to measure the plasma potential profile near the plasma boundary. For many discharge parameters, the potential profile was that of a typical electropositive sheath, but it was shifted negative due to negative charge accumulated on the plasma-surface boundary. A virtual cathode was observed near the boundary when the neutral pressure, primary electron energy, and/or discharge current were low ({approx}2 x 10{sup -4} Torr, {approx}60 eV, and 80 mA, respectively). The behavior of the sheath potential was shown to be consistent with that predicted by particle balance and a qualitative mechanism for wall charging is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SU-E-T-584: Optical Tracking Guided Patient-Specific VMAT QA with ArcCHECK

Purpose: To investigate the novel use of an in-house optical tracking system (OTS) to improve the efficacy of VMAT QA with a cylindrical dosimeter (ArcCHECK™). Methods: The translational and rotational setup errors of ArcCHECK are convoluted which makes it challenging to position the device efficiently and accurately. We first aligned the ArcCHECK to the machine cross-hair at three cardinal angles (0°, 90°, and 270°) to establish a reference position. Four infrared reflective markers were attached to the back of the device. An OTS with 0.2mm/0.2° accuracy was used to control its setup uncertainty. Translational uncertainties of 1 mm and 2 mm in three directions (in, right, and up) were applied on the device. Four open beams of various field sizes and six clinical VMAT arcs were delivered and measured for all simulated setup errors. The measurements were compared with Pinnacle™ calculations using Gamma analysis to evaluate the impact of setup uncertainty. This study also evaluated the improvement in setup reproducibility and efficiency with the aid of the OTS. Results: For open beams, with 3%/3mm, the mean passing rates dropped by less than 5% for all shifts; with 2%/2mm, two significant drops(>5%) were observed: 15.38±6.75% for 2 mm lateral shift and 9.35±4.88% for 2 mm longitudinal shift. For VMAT arcs, the mean passing rates using 2%/2mm dropped by 10.47±7.46% and 22.02±11.39% for 1 and 2 mm shift, respectively. With 3%/3mm, significant drop only occurred with 2 mm longitudinal shift (13.73±8.30%). Setup time could be reduced by >15 min with the aid of the OTS. Conclusion: OTS is an effective tool for separating translational and rotational uncertainties. The current VMAT QA solution was not strongly sensitive to translation errors of 2mm with widely accepted criterion (3%/3mm). This finding raises concerns regarding the efficacy of such QA system in detecting errors in the dynamic VMAT delivery.

61 RADIATION PROTECTION AND DOSIMETRY↗

Mathematical Analysis of High-Temperature Co-electrolysis of CO2 and O2 Production in a Closed-Loop Atmosphere Revitalization System

NASA has been evaluating two closed-loop atmosphere revitalization architectures based on Sabatier and Bosch carbon dioxide, CO2, reduction technologies. The CO2 and steam, H2O, co-electrolysis process is another option that NASA has investigated. Utilizing recent advances in the fuel cell technology sector, the Idaho National Laboratory, INL, has developed a CO2 and H2O co-electrolysis process to produce oxygen and syngas (carbon monoxide, CO and hydrogen, H2 mixture) for terrestrial (energy production) application. The technology is a combined process that involves steam electrolysis, CO2 electrolysis, and the reverse water gas shift (RWGS) reaction. A number of process models have been developed and analyzed to determine the theoretical power required to recover oxygen, O2, in each case. These models include the current Sabatier and Bosch technologies and combinations of those processes with high-temperature co-electrolysis. The cases of constant CO2 supply and constant O2 production were evaluated. In addition, a process model of the hydrogenation process with co-electrolysis was developed and compared. Sabatier processes require the least amount of energy input per kg of oxygen produced. If co-electrolysis replaces solid polymer electrolyte (SPE) electrolysis within the Sabatier architecture, the power requirement is reduced by over 10%, but only if heat recuperation is used. Sabatier processes, however, require external water to achieve the lower power results. Under conditions of constant incoming carbon dioxide flow, the Sabatier architectures require more power than the other architectures. The Bosch, Boudouard with co-electrolysis, and the hydrogenation with co-electrolysis processes require little or no external water. The Bosch and hydrogenation processes produce water within their reactors, which aids in reducing the power requirement for electrolysis. The Boudouard with co-electrolysis process has a higher electrolysis power requirement because carbon dioxide is split instead of water, which has a lower heat of formation. Hydrogenation with co-electrolysis offers the best overall power performance for two reasons: it requires no external water, and it produces its own water, which reduces the power requirement for co-electrolysis.

08 HYDROGEN↗

Mid-Holocene Antarctic sea-ice increase driven by marine ice sheet retreat

Abstract. Over recent decades Antarctic sea-ice extent has increased, alongside widespread ice shelf thinning and freshening of waters along the Antarctic margin. In contrast, Earth system models generally simulate a decrease in sea ice. Circulation of water masses beneath large-cavity ice shelves is not included in current Earth System models and may be a driver of this phenomena. We examine a Holocene sediment core off East Antarctica that records the Neoglacial transition, the last major baseline shift of Antarctic sea ice, and part of a late-Holocene global cooling trend. We provide a multi-proxy record of Holocene glacial meltwater input, sediment transport, and sea-ice variability. Our record, supported by high-resolution ocean modelling, shows that a rapid Antarctic sea-ice increase during the mid-Holocene (∼ 4.5 ka) occurred against a backdrop of increasing glacial meltwater input and gradual climate warming. We suggest that mid-Holocene ice shelf cavity expansion led to cooling of surface waters and sea-ice growth that slowed basal ice shelf melting. Incorporating this feedback mechanism into global climate models will be important for future projections of Antarctic changes.

58 GEOSCIENCES↗

Production of Molybdenum-99 by (n, ) activation and direct separation of Technetium-99m without column generator fabrication: A viable strategy for enhanced availability of technetium-99m

Fission-produced 99Mo (F 99Mo) is traditionally used for fabrication of 99Mo/99mTc adsorption-type column generators. In this paper, several emerging strategies that are being pursued or have been suggested to overcome the continuing shortages of F 99Mo are discussed. To provide an alternative source of 99Mo, the principal focus of this analysis is a detailed discussion of the advantages and strategies for enhanced production of low-specific-activity 99Mo (LSA 99Mo) by direct activation of molybdenum targets in nuclear reactors. In order to enhance the availability of 99Mo, development of an increased network of reactors for production of LSA 99Mo is described, as well as utilization of currently unused reactors. The time spent in manufacturing of 99Mo/99mTc column generators is responsible for the loss of more than 50% of F99Mo produced. Hence, the authors propose a paradigm shift in the use of 99Mo by recovering clinical-grade 99mTc from 99Mo solution as an alternative to use of 99Mo/99mTc column generators, thereby avoiding substantial decreased availability of 99Mo from radioactive decay. Implementation of the suggested strategies would be expected to increase availability of 99mTc to the clinical user community by several folds. Additional important advantages of the use of LSA 99Mo include precluding the need for fission product waste management and phasing out the need for high- and low-enriched uranium as target materials for medical radioisotope production.

column generator↗

Error Propagation for Response Matrix Methods in the Many Node Limit

The response matrix method has been a useful solution method for radiation transport problems for decades. The method is desirable for many reasons. It can be extended to both fixed source and eigenvalue problems. In addition, a key aspect of the method is a shift of computational expense to a precomputation phase. Methods and codes employing response matrix or response matrix-like methods have enjoyed formidable computational efficiency while solving large problems. However, current applications of the method rely on large node sizes and few nodes to maximize computational efficiency. As part of a desire to make these methods more amenable to applications such as parallel computing in the future, the number of nodes in problems may increase, and node size will decrease. The effect of this change has not been well studied except for a few cases. In the past, it was determined that a poor approximation of angular dependence of flux on node interfaces could lead to large error propagation for fixed source problems, but a newer study indicates that changing node sizes as well as number of nodes poses little challenge for response methods in the eigenvalue case. This paper presents the unintuitive result that for response matrix methods increasing the spatial resolution of the problem may dramatically decrease accuracy - this effect is demonstrated on a simple analytic 1-D benchmark problem. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Contact interactions in low scale string models with intersecting D6-branes

We evaluate the tree level four fermion string amplitudes in the TeV string mass scale models with intersecting D6-branes. The coefficient functions of contact interactions subsuming the contributions of string Regge resonance and winding mode excitations are obtained by subtracting out the contributions from the string massless and massive momentum modes. Numerical applications are developed for the standard-model-like solution of Cremades, Ibanez, and Marchesano for a toroidal orientifold with four intersecting D6-brane stacks. The chirality conserving contact interactions of the quarks and leptons are considered in applications to high-energy collider and flavor changing neutral current phenomenology. The two main free parameters consist of the string and compactification mass scales, m{sub s} and M{sub c}. Useful constraints on these parameters are derived from predictions for the Bhabha scattering differential cross section and for the observables associated to the mass shifts of the neutral meson systems K-K, B-B, D-D and the lepton number violating three-body leptonic decays of the charged leptons {mu} and {tau}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dose equations for tube current modulation in CT scanning and the interpretation of the associated CTDI{sub vol}

Purpose: The scanner-reported CTDI{sub vol} for automatic tube current modulation (TCM) has a different physical meaning from the traditional CTDI{sub vol} at constant mA, resulting in the dichotomy “CTDI{sub vol} of the first and second kinds” for which a physical interpretation is sought in hopes of establishing some commonality between the two.Methods: Rigorous equations are derived to describe the accumulated dose distributions for TCM. A comparison with formulae for scanner-reported CTDI{sub vol} clearly identifies the source of their differences. Graphical dose simulations are also provided for a variety of TCM tube current distributions (including constant mA), all having the same scanner-reported CTDI{sub vol}.Results: These convolution equations and simulations show that the local dose at z depends only weakly on the local tube current i(z) due to the strong influence of scatter from all other locations along z, and that the “local CTDI{sub vol}(z)” does not represent a local dose but rather only a relative i(z) ≡ mA(z). TCM is a shift-variant technique to which the CTDI-paradigm does not apply and its application to TCM leads to a CTDI{sub vol} of the second kind which lacks relevance.Conclusions: While the traditional CTDI{sub vol} at constant mA conveys useful information (the peak dose at the center of the scan length), CTDI{sub vol} of the second kind conveys no useful information about the associated TCM dose distribution it purportedly represents and its physical interpretation remains elusive. On the other hand, the total energy absorbed E (“integral dose”) as well as its surrogate DLP remain robust between variable i(z) TCM and constant current i{sub 0} techniques, both depending only on the total mAs = t{sub 0}=i{sub 0} t{sub 0} during the beam-on time t{sub 0}.

61 RADIATION PROTECTION AND DOSIMETRY↗

Graphene/semiconductor silicon modified BiFeO{sub 3}/indium tin oxide ferroelectric photovoltaic device for transparent self-powered windows

We report photovoltaic response of highly transparent graphene/BiFe{sub 0.95}Si{sub 0.05}O{sub 3} (BFSiO)/ITO/glass derived from bottom-up spin coating technique. The device exhibits short-circuit-current (I{sub SC} 0.75 mA) with 1000 fold upsurge and open-circuit-voltage (V{sub OC} ∼ 0.45 V) under standard AM 1.5 illumination through graphene. In combination, I{sub SC} of 0.63 mA and V{sub OC} of 0.35 V for same illumination through ITO, reveals the prospects of harvesting indoor light. Also, crystallographic structure, red shift in band gap, leakage behavior, and ferroelectric characteristics of BFSiO thin films are reported. Reproducible transient response of I{sub SC} and V{sub OC} with quick switching (<100 ms) for 20 consecutive cycles and stability (95%) over test period of 16 weeks signifies high endurance and retentivity, promising for building integrated self-powered windows.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Frequency-Selectable Laser Source (FLS) Calibrator for CMB Bandpass Characterization

One of the biggest challenges for Cosmic Microwave Background (CMB) experiments comes from our detector bandpass calibration. Uncertainties in bandpass can severely limit our measurements by limiting foreground removal and spectral fitting, which is particularly important for high-$\ell$ observations like cluster science using the Sunyaev-Zeldovich (SZ) effect. Currently, CMB experiments typically use a Fourier Transform Spectrometer (FTS) to measure the detector bandpasses. However, the resolution of the FTS is dependent on the length of the interferometer arms, leading to a need for increasingly large FTS instruments as CMB experiments require tighter constraints on detector bandpasses. Additionally, systematic effects like shifts in bandpass shape from uneven illumination from the FTS further limit the calibration uncertainties. As a complement to the FTS, we have developed a Frequency-selectable Laser Source (FLS) calibrator, which uses a laser with adjustable frequency housed in a calibrator that allows for varying degrees of laser power attenuation. We present several tests used to characterize the first prototype design of the FLS calibrator, as well as the improvements to the calibrator design currently underway.

Saunders, Lauren [Fermilab]↗

Application of new simulation algorithms for modeling rf diagnostics of electron clouds

Traveling wave rf diagnostics of electron cloud build-up show promise as a non-destructive technique for measuring plasma density and the efficacy of mitigation techniques. However, it is very difficult to derive an absolute measure of plasma density from experimental measurements for a variety of technical reasons. Detailed numerical simulations are vital in order to understand experimental data, and have successfully modeled build-up. Such simulations are limited in their ability to reproduce experimental data due to the large separation of scales inherent to the problem. Namely, one must resolve both rf frequencies in the GHz range, as well as the plasma modulation frequency of tens of MHz, while running for very long simulations times, on the order of microseconds. The application of new numerical simulation techniques allow us to bridge the simulation scales in this problem and produce spectra that can be directly compared to experiments. The first method is to use a plasma dielectric model to measure plasma-induced phase shifts in the rf wave. The dielectric is modulated at a low frequency, simulating the effects of multiple bunch crossings. This allows simulations to be performed without kinetic particles representing the plasma, which both speeds up the simulations as well as reduces numerical noise from interpolation of particle charge and currents onto the computational grid. Secondly we utilize a port boundary condition model to simultaneously absorb rf at the simulation boundaries, and to launch the rf into the simulation. This method improves the accuracy of simulations by restricting rf frequencies better than adding an external (finite) current source to drive rf, and absorbing layers at the boundaries. We also explore the effects of non-uniform plasma densities on the simulated spectra.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Alternating Current Photovoltaic Effect

It is well known that the photovoltaic effect produces a direct current (DC) under solar illumination owing to the directional separation of light-excited charge carriers at the p–n junction, with holes flowing to the p-side and electrons flowing to the n-side. In this study, we found that apart from the DC generated by the conventional p–n photovoltaic effect, there is another new type of photovoltaic effect that generates alternating current (AC) in the nonequilibrium states when the illumination light periodically shines at the junction/interface of materials. The peak current of AC at high switching frequency can be much higher than that from DC. The AC cannot be explained by the established mechanisms for conventional photovoltaics; instead, it is suggested to be a result of the relative shift and realignment between the quasi-Fermi levels of the semiconductors adjacent to the junction/interface under the nonequilibrium conditions, which results in electron flow in the external circuit back and forth to balance the potential difference between two electrodes. By virtue of this effect, the device can work as a high-performance broadband photodetector with extremely high sensitivity under zero bias; it can also work as a remote power source providing extra power output in addition to the conventional photovoltaic effect.

36 MATERIALS SCIENCE↗

Analyzing battery electric vehicle feasibility from taxi travel patterns: The case study of New York City, USA

Electric taxis have the potential to improve urban air quality and save driver’s energy expenditure. Although battery electric vehicles (BEVs) have drawbacks such as the limited range and charging inconvenience, technological progress has been presenting promising potential for electric taxis. Many cities around the world including New York City, USA are taking initiatives to replace gasoline taxis with plug-in electric vehicles. This study extracts ten variables from the trip data of the New York City yellow taxis to represent their spatial-temporal travel patterns in terms of driver-shift, travel demand and dwell, and examines the implications of these driving patterns on the BEV taxi feasibility. The BEV feasibility of a taxi is quantified as the percentage of occupied trips that can be completed by BEVs of a given driving range during a year. It is found that the currently deployed 280 public charging stations in New York City are far from sufficient to support a large BEV taxi fleet. However, adding merely 372 new charging stations at various locations where taxis frequently dwell can potentially make BEVs with 200- and 300-mile ranges feasible for more than half of the taxi fleet. Finally, the results also show that taxis with certain characteristics are more suitable for switching to BEV-200 or BEV-300, such as fewer daily shifts, fewer drivers assigned to the taxi, shorter daily driving distance, fewer daily dwells but longer dwelling time, and higher likelihood to dwell at the borough of Manhattan.

25 ENERGY STORAGE↗

End-Use Load Profiles for the U.S. Building Stock: Market Needs, Use Cases, and Data Gaps

States and utilities are developing increasingly ambitious energy goals. Part of the solution to meeting these goals is improving electric grid flexibility. This includes shifting electric demand to align with grid needs. Thus, identifying and using building energy efficiency and other distributed energy resources to produce the highest grid value requires highly resolved, accurate and accessible electricity end-use load profiles (EULPs). EULPs quantify how and when energy is used. Currently, few accurate and accessible end-use load profiles are available for utilities, public utility commissions, state energy offices and other stakeholders to use to prioritize investment and value energy efficiency, demand response, distributed generation and energy storage. High-quality EULPs are also critical for determining the time-sensitive value of efficiency and other distributed energy resources, and the widespread adoption of grid-interactive efficient buildings (GEBs).For example, EULPs can be used to accurately forecast energy savings in buildings or identify energy activities that can be shifted to different times of the day. This report serves as the first-year deliverable for a multiyear U.S. Department of Energy-funded project, End-Use Load Profiles for the U.S. Building Stock, that intends to produce a set of highly resolved EULPs of the U.S. residential and commercial building stock. The project team, made up of researchers from the National Renewable Energy Laboratory (NREL), Lawrence Berkeley National Laboratory (LBNL), and Argonne National Laboratory, ultimately will use calibrated physics-based building energy models to create these EULPs.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Recursion relations for AdS/CFT correlators

We expand on the results of our recent letter [Phys. Rev. Lett. 106, 091601 (2011)], where we presented new recursion relations for correlation functions of the stress-tensor and conserved currents in conformal field theories with an AdS{sub d+1} dual for d{>=}4. These recursion relations are derived by generalizing the Britto-Cachazo-Feng-Witten (BCFW) relations to amplitudes in anti-de Sitter space (AdS) that are dual to boundary correlators, and are usually computed perturbatively by Witten diagrams. Our results relate vacuum-correlation functions to integrated products of lower-point transition amplitudes, which correspond to correlators calculated between states dual to certain normalizable modes. We show that the set of ''polarization vectors'' for which amplitudes behave well under the BCFW extension is smaller than in flat-space. We describe how transition amplitudes for more general external polarizations can be constructed by combining answers obtained by different pairs of BCFW shifts. We then generalize these recursion relations to supersymmetric theories. In AdS, unlike flat-space, even maximal supersymmetry is insufficient to permit the computation of all correlators of operators in the same multiplet as a stress-tensor or conserved current. Finally, we work out some simple examples to verify our results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Calcium-Substituted Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} Ceramics Synthesized via Thermal Treatment Method: Structural and Superconducting Properties

In this work, Y{sub 3}(Ba{sub 1−x}Ca{sub x}){sub 5}Cu{sub 8}O{sub 18} compounds with x = 0.00, 0.01, 0.02, 0.03 and 0.05 were synthesized by thermal treatment of aqueous solution of metal nitrates and polyvinylpyrrolidone (PVP). The effects of Ca substitution on the crystal structure, electrical resistance and the microstructure of samples were investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), four-point probe measurement and AC susceptibility. FESEM analysis showed that there was an increase in the grain size and compactness. The zero-resistance critical temperature decreased from 92 K for the pure sample to 83 K for sample x = 0.05. From AC susceptibility result, the intra- and inter-granular loss peaks shifted toward lower temperature and become wider and broader with the increase of Ca substitution due to the weakening of grain coupling. On the other hand, the inter-granular critical current density (J{sub cm}) was found to increase with Ca substitution and has the highest value J{sub cm} = 35 A cm{sup − 2} at x = 0.05, indicating that the Ca substitution was associated with the formation of pinning centres in the Y-358 matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Decomposing passenger transport futures: Comparing results of global integrated assessment models

The transport sector is growing fast in terms of energy use and accompanying greenhouse gas emissions. Integrated assessment models (IAMs) are used widely to analyze energy system transitions over a decadal time frame to help inform and evaluating international climate policy. As part of this, IAMs also explore pathways of decarbonizing the transport sector. This study quantifies the contribution of changes in activity growth, modal structure, energy intensity and fuel mix to the projected passenger transport carbon emission pathways. The Laspeyres index decomposition method is used to compare results across models and scenarios, and against historical transport trends. Broadly-speaking the models show similar trends, projecting continuous transport activity growth, reduced energy intensity and in some cases modal shift to carbon-intensive modes - similar to those observed historically in a business-as-usual scenario. In policy-induced mitigation scenarios further enhancements of energy efficiency and fuel switching is seen, showing a clear break with historical trends. Reduced activity growth and modal shift (towards less carbon-intensive modes) only have a limited contribution to emission reduction. Measures that could induce such changes could possibly complement the aggressive, technology switch required in the current scenarios to reach internationally agreed climate targets.

Edelenbosch, Oreane Y.↗