Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scientific data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Removal of instrument signature from Mariner 9 television images of Mars

The Mariner 9 spacecraft was inserted into orbit around Mars in November 1971. The two vidicon camera systems returned over 7300 digital images during orbital operations. The high volume of returned data and the scientific objectives of the Television Experiment made development of automated digital techniques for the removal of camera system-induced distortions from each returned image necessary. This paper describes the algorithms used to remove geometric and photometric distortions from the returned imagery. Enhancement processing of the final photographic products is also described.

Green, W. B.↗

Reduction and analysis of ATS-6 data

The reduction of data obtained by the experiment on ATS-6 is presented and a scientific analysis of the data is included. During the period covered significant progress was made in both reduction and analysis of ATS-6 data. The relationship between the direction of the interplanetary magnetic field and the fluxes of energetic electrons at the synchronous altitude was clarified, and a simple model of the energetic electron environment as observed by ATS-6 was developed and a simple empirical relationship was extended, which predicts the maximum energetic electron flux to be expected at the synchronous orbit.

Paulikas, G. A.↗

Infrared remote sensing of the atmosphere of Venus from the Pioneer 12 Orbiter

The Pioneer 12 spacecraft, which was placed into orbit about Venus on 4 December 1978, carried a multispectral radiometer designed to investigate the structure and meteorological properties of the middle atmosphere (60 to 140 km). This paper reviews the experiment concept, the design, implementation and calibration of the hardware, and the preliminary scientific results from data obtained through 14 February 1979.

Taylor, F. W.↗

Analysis of the NASA/MSFC Airborne Doppler Lidar results from San Gorgonio Pass, California

Two days during July of 1981 the NASA/MSFC Airborne Doppler Lidar System (ADLS) was flown aboard the NASA/AMES Convair 990 on the east side of San Gorgonio Pass California, near Palm Springs, to measure and investigate the accelerated atmospheric wind field discharging from the pass. The vertical and horizontal extent of the fast moving atmospheric flow discharging from the San Gorgonio Pass were examined. Conventional ground measurements were also taken during the tests to assist in validating the ADLS results. This particular region is recognized as a high wind resource region and, as such, a knowledge of the horizontal and vertical extent of this flow was of interest for wind energy applications. The statistics of the atmospheric flow field itself as it discharges from the pass and then spreads out over the desert were also of scientific interests. This data provided the first spatial data for ensemble averaging of spatial correlations to compute longitudinal and lateral integral length scales in the longitudinal and lateral directions for both components.

Cliff, W. C.↗

A cometary and interplanetary dust experiment on the Vega spacecraft missions to Halley's Comet

The dust counter and mass analyzer on board both the Vega 1 and Vega 2 spacecraft scheduled to encounter Halley's Comet are discussed. The operational modes, data formats, telemetry modes and data acquisition, and scientific measurements planned for this experiment both at encounter and during interplanetary travel are described. The initial postlaunch calibration and experiment status are summarized in an appendix.

Perkins, M. A.↗

UV albedo of clouds from TOMS data

The Pilot Climate Data System (PCDS) was found to be useful in examining a subset of data from the Nimbus-7 Total Ozone Mapping Spectrometer (TOMS). The TOMS instrument scans with six channels between .3 and .4 micrometers. It was suggested that by analyzing albedo values from the longer wavelength channels of the TOMS, the effects of increasing optical depth could be determined. It is spectral relationship of albedo-to-optical depth that is investigated here. The question can be stated: Is there spectral differentiation in albedo with changes in the optical depth of clouds? Nimbus-7 TOMS data were obtained through the PCDS for an area and time period for which correlative NOAA AVHRR data were available. The AVHRR data were important in determining the existing cloud patterns. As expected, no spectral differentiation was observed at very high albedos (associated with high optical depths). However, at lower optical depths, evidence of spectral dependence on albedo was observed. Mapping the results geographically was deemed highly desirable but was not possible through the PCDS at the time. The PCDS can be viewed as an effective research tool to access selected portions of data. Without being intimately familiar with a data set, a PCDS user can successfully manipulate data in a scientific study.

Short, D.↗

Technology and applications - Convergence to a tether capability

In this paper, a convergence of interest from many potential tether applications is synthesized into one application that could be satisfied by a tethered satellite capability. This application is the use of a tethered research satellite deployed downward from the Shuttle Orbiter to gather scientific and engineering/technology data about the outer atmosphere from about 90 to 130 km. The atmospheric and aerothermodynamic information needed about this region of the atmosphere is identified, and the specific applications of that information, the tether capability, and the technology needed to gather the data are described.

Anderson, John L.↗

Visions of visualization aids: Design philosophy and experimental results

Aids for the visualization of high-dimensional scientific or other data must be designed. Simply casting multidimensional data into a two- or three-dimensional spatial metaphor does not guarantee that the presentation will provide insight or parsimonious description of the phenomena underlying the data. Indeed, the communication of the essential meaning of some multidimensional data may be obscured by presentation in a spatially distributed format. Useful visualization is generally based on pre-existing theoretical beliefs concerning the underlying phenomena which guide selection and formatting of the plotted variables. Two examples from chaotic dynamics are used to illustrate how a visulaization may be an aid to insight. Two examples of displays to aid spatial maneuvering are described. The first, a perspective format for a commercial air traffic display, illustrates how geometric distortion may be introduced to insure that an operator can understand a depicted three-dimensional situation. The second, a display for planning small spacecraft maneuvers, illustrates how the complex counterintuitive character of orbital maneuvering may be made more tractable by removing higher-order nonlinear control dynamics, and allowing independent satisfaction of velocity and plume impingement constraints on orbital changes.

Ellis, Stephen R.↗

Visions of visualization aids - Design philosophy and observations

Aids for the visualization of high-dimensional scientific or other data must be designed. Simply casting multidimensional data into a two-dimensional or three-dimensional spatial metaphor does not guarantee that the presentation will provide insight or a parsimonious description of phenomena implicit in the data. Useful visualization, in contrast to glitzy, high-tech, computer-graphics imagery, is generally based on preexisting theoretical beliefs concerning the underlying phenomena. These beliefs guide selection and formatting of the plotted variables. Visualization tools are useful for understanding naturally three-dimensional data bases such as those used by pilots or astronauts. Two examples of such aids for spatial maneuvering illustrate that informative geometric distortion may be introduced to assist visualization and that visualization of complex dynamics alone may not be adequate to provide the necessary insight into the underlying processes.

Ellis, Stephen R.↗

Friction and wear of TPS fibers: A study of the adhesion and friction of high modulus fibers

The adhesional and frictional forces between filaments in a woven fabric or felt, strongly influenced the processability of the fiber and the mechanical durability of the final product. Even though the contact loads between fibers are low, the area of contact is extremely small giving rise to very high stresses; principally shear stresses. One consequence of these strong adhesional and frictional forces is the resistance of fibers to slide past each other during weaving or when processed into nonwoven mats or felts. Furthermore, the interfiber frictional forces may cause surface damage and thereby reduce the fiber strength. Once formed into fabrics, flexural handling and manipulation of the material again causes individual filaments to rub against each other resulting in modulus, brittle fibers such as those used in thermal protection systems (TPS). The adhesion and friction of organic fibers, notably polyethylene terephthalate (PET) fibers, have been extensively studied, but there has been very little work reported on high modulus inorganic fibers. An extensive study was made of the adhesion and friction of flame drawn silica fibers in order to develop experimental techniques and a scientific basis for data interpretation. Subsequently, these methods were applied to fibers of interest in TPS materials.

Bascom, Willard D.↗

Proton-induced radiation damage in germanium detectors

High-purity germanium (HPGe) detectors will be used in future space missions for gamma-ray measurements and will be subject to interactions with energetic particles. To simulate this process, several large-volume n-type HPGe detectors were incrementally exposed to a particle fluence of up to 10 to the 8th protons/sq cm (proton energy: 1.5 GeV) at different operating temperatures (90 to 120 K) to induce radiation damage. Basic scientific and engineering data on detector performance were collected. During the incremental irradiation, the peak shape produced by the detectors showed a significant change from a Gaussian shape to a broad complex structure. After the irradiation, all detectors were thoroughly characterized by measuring many parameters. To remove the accumulated radiation damage, the detectors were stepwise-annealed at temperatures below 110 C, while kept in their specially designed cryostats. This study shows that n-type HPGe detectors can be used in charged-particle environments as high-energy resolution devices until a certain level of radiation damage is accumulated and that the damage can be removed at moderate annealing temperatures and the detector returned to operating condition.

Brueckner, J.↗

ISEE/ICE plasma wave data analysis

The work performed for the period 1 Jan. 1985 to 30 Oct. 1989 is presented. The objective was to provide reduction and analysis of data from a scientific instrument designed to study solar wind and plasma wave phenomena on the International Sun Earth Explorer 3 (ISEE-3)/International Cometary Explorer (ICE) missions.

Greenstadt, E. W.↗

Remote sensing of ice and snow - Review and status

The interpretation of satellite data is reviewed to address the possibility of extracting geophysically useful data regarding ice and snow. The scientific and practical utility of such data is examined in terms of the required and available scales, resolutions, and data types. Satellite instrumentation for ice and snow studies includes the AVHRR, the Special Sensor Microwave Imager, and the altimeters on Geosat and the European Remote Sensing Satellite. The satellites are presently used for conducting investigations of the microwave radiometry of snow, shortwave snowcover inventories, and sensor and model validations. It is noted that these studies encompass a range of ice properties and employ approaches and scientists from a number of fields. Areas that remain to be addressed in the field include snow structure and substrate effects, fall cooling, floe flooding, and brine expulsion.

Carsey, Frank↗

The StarView intelligent query mechanism

The StarView interface is being developed to facilitate the retrieval of scientific and engineering data produced by the Hubble Space Telescope. While predefined screens in the interface can be used to specify many common requests, ad hoc requests require a dynamic query formulation capability. Unfortunately, logical level knowledge is too sparse to support this capability. In particular, essential formulation knowledge is lost when the domain of interest is mapped to a set of database relation schemas. Thus, a system known as QUICK has been developed that uses conceptual design knowledge to facilitate query formulation. By heuristically determining strongly associated objects at the conceptual level, QUICK is able to formulate semantically reasonable queries in response to high-level requests that specify only attributes of interest. Moreover, by exploiting constraint knowledge in the conceptual design, QUICK assures that queries are formulated quickly and will execute efficiently.

Semmel, R. D.↗

Geodynamics - Tracking satellites to monitor global change

The major goals and organizational structure of the International GPS Geodynamics Service (IGS), a new Navstar satellite tracking service, are described. IGS activities are aimed at providing the scientific community with data on GPS orbits accurate enough for performing regional and local GPS analysis and daily earth rotation information.

Beutler, Gerhard↗

Program Supports Scientific Visualization

Primary purpose of General Visualization System (GVS) computer program is to support scientific visualization of data generated by panel-method computer program PMARC_12 (inventory number ARC-13362) on Silicon Graphics Iris workstation. Enables user to view PMARC geometries and wakes as wire frames or as light shaded objects. GVS is written in C language.

Keith, Stephan↗

Deep near-infrared survey of the Southern Sky (DENIS)

DENIS (Deep Near-Infrared Survey of the Southern Sky) will be the first complete census of astronomical sources in the near-infrared spectral range. The challenges of this novel survey are both scientific and technical. Phenomena radiating in the near-infrared range from brown dwarfs to galaxies in the early stages of cosmological evolution, the scientific exploitation of data relevant over such a wide range requires pooling expertise from several of the leading European astronomical centers. The technical challenges of a project which will provide an order of magnitude more sources than given by the IRAS space mission, and which will involve advanced data-handling and image-processing techniques, likewise require pooling of hardware and software resources, as well as of human expertise. The DENIS project team is composed of some 40 scientists, computer specialists, and engineers located in 5 European Community countries (France, Germany, Italy, The Netherlands, and Spain), with important contributions from specialists in Australia, Brazil, Chile, and Hungary. DENIS will survey the entire southern sky in 3 colors, namely in the I band at a wavelength of 0.8 micron, in the 1.25 micron J band, and in the 2.15 micron K' band. The sensitivity limits will be 18th magnitude in the I band, 16th in the J band, and 14.5th in the K' band. The angular resolution achieved will be 1 arcsecond in the I band, and 3.0 arcseconds in the J and K' bands. The European Southern Observatory 1 m telescope on La Silla will be dedicated to survey use during operations expected to last four years, commencing in late 1993. DENIS aims to provide the astronomical community with complete digitized infrared images of the full southern sky and a catalogue of extracted objects, both of the best quality and in readily accessible form. This will be achieved through dedicated software packages and specialized catalogues, and with assistance from the Leiden and Paris Data Analysis Centers. The data will be mailed on DAT tapes from La Silla to the two Data Analysis Centers for further processing. Two centers are necessary because of the shear quantity of data and because of the complementary roles the Centers will develop, each exploiting its own particular expertise. The Leiden Data Analysis Center (LDAC) will extract objects, establish their parameters, and archive them into a source catalogue. The LDAC will collaborate with the Groningen Space Research group that has gained experience in infrared image handling from the IRAS satellite. The Paris Data Analysis Center (PDAC) will be responsible for archiving and preprocessing the raw data to provide a homogeneous set of data suitable for further reduction in both the Leiden and Paris data analysis streams. The PDAC will also extract and archive images for the sources flagged by the LDAC as extended, and create a catalogue of galaxies. In exploiting the DENIS data we foresee the collaboration with other data analysis centers, such as the Observatoire de Lyon where the relevant DENIS catalogue of galaxies can be incorporated into their extragalactic database. The Point Sources and the Small Extended Sources catalogues could be incorporated in the Late Type Star database at Montpellier, and in the SIMBAD database as CDS. At Groningen the IRAS Point Source catalogue and/or image data can be merged with the DENIS catalogues. At Meudon algorithms and software will be developed with main goal assessing the limits reachable for the homogeneity and intrinsic consistency between the ensemble of the images in the data base (flat-fielding, relative positioning of the fields, bootstrapped flux calibration) but also for the data analysis.

Deul, E.↗

Computing in space: Issues and answers

Future plans for space exploration call for scientific instruments whose data is increasingly voluminous, far exceeding constraints set by telemetry rates, and therefore, an increased role for spaceborne computing. Three issues that greatly influence the realization of spaceborne computing systems are addressed. The first involves the identification of those research problems which are unique to space computing. Resources must be expended on these problems if efforts are to add value to, and have impact on, the technology of computing in space. The second addresses the transfer of new technology from the research laboratory to use in space. What can be done to expedite this process and shrink the technology gap that separates Earth and space based systems must be assessed. The third issue involves the user's point of view of what is required of new space computing systems. That is, what are the driving forces that most influence customers' decisions to use or not use new technology? Issues of design environment for spaceborne computers, tools for modeling and evaluation of flight systems, and validation of space flight hardware and software are also discussed.

Davidson, John M.↗