Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scenario optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Optimal self-healing strategy for microgrid islanding

Renewable resource based microgrids provide reliable and cost-effective electricity with low carbon emissions. The flexibility of operating in grid-connected or islanded modes enables a microgrid to serve loads reliably. In the case of unexpected events happening to the main grid, the microgrid will isolate itself and operate in islanded mode to prevent any adversary impacts. The availability of renewable generation in the microgrid has significant impacts on the islanding strategy and different scenarios need to be considered. This study proposes a comprehensive microgrid self-healing strategy under different circumstances. The proposed strategy encompasses generation re-dispatch, network reconfiguration, and load shedding. The microgrid self-healing problem is formulated as a mixed-integer quadratic programming problem, which provides a globally optimal solution to facilitate smooth islanding of the microgrid. A modified Consortium for Electric Reliability Technology Solutions microgrid is used to conduct simulation under various scenarios. The simulation results demonstrate the efficiency of the proposed self-healing strategy in minimising costs of load shedding and generation with optimal switching actions.

optimal self-healing strategy↗

Engineering calculations for communications satellite systems planning

Computer-based techniques for optimizing communications-satellite orbit and frequency assignments are discussed. A gradient-search code was tested against a BSS scenario derived from the RARC-83 data. Improvement was obtained, but each iteration requires about 50 minutes of IBM-3081 CPU time. Gradient-search experiments on a small FSS test problem, consisting of a single service area served by 8 satellites, showed quickest convergence when the satellites were all initially placed near the center of the available orbital arc with moderate spacing. A transformation technique is proposed for investigating the surface topography of the objective function used in the gradient-search method. A new synthesis approach is based on transforming single-entry interference constraints into corresponding constraints on satellite spacings. These constraints are used with linear objective functions to formulate the co-channel orbital assignment task as a linear-programming (LP) problem or mixed integer programming (MIP) problem. Globally optimal solutions are always found with the MIP problems, but not necessarily with the LP problems. The MIP solutions can be used to evaluate the quality of the LP solutions. The initial results are very encouraging.

Reilly, C. H.↗

Optimal Communication Topology Determination and Sensor Selection for Independent Airspace Surveillance

The paper presents an approach to sensors selection and network topology determination for independent airspace surveillance with maximum outcome and minimum cost using ground based distributed sensing, computing and communication network infrastructure. The selection criteria includes minimum estimation error, maximum airspace coverage, minimum communication time and power consumption while guaranteeing the system observability and providing in-time quality information to a monitoring observer. The developed algorithm uses multi-objective optimization strategy taking into account trade-offs between conflicting objectives and relaxations for in time implementation. It is implemented utilizing graph theoretic tools. The approach is validated in a desktop simulation environment using synthetic sensors data generated for a simulated multi-vehicle flight scenario in the selected regional airspace.

Distributed sensing↗

Multi-objective automatic discovery of optimized metamaterials for varying velocity impact protection

Mechanical metamaterials have demonstrated exceptional impact performance while remaining lightweight. Impact resistance has traditionally been investigated using quasi-static simulations, often with the assumption that performance will translate to high-velocity impact scenarios. However, critical crash protection parameters—such as peak stress and absorbed energy—are highly sensitive to impact velocity, leading to inconsistent performance under dynamic loading. To address this, we introduce a strain-rate-aware, active deep learning framework that enables multi-objective optimization of impact protection metrics across a wide range of impact velocities. Our framework captures the strain-rate sensitivity of architected lattices by learning to control spatial gradation in cellular metamaterials, resulting in over 200 % enhancement in impact protection relative to state-of-the-art designs such as Voronoi and re-entrant lattices. We demonstrate its practical utility by designing next-generation lattice structures for automotive bumper systems that satisfy multiple, velocity-specific safety criteria—capabilities beyond those of conventional designs. More than just a predictive tool, this framework marks the first step towards enabling adaptable impact-resistant structures across dynamic regimes.

Deep learning↗

Quantitative simulation of extraterrestrial engineering devices

This is a multicomponent, multidisciplinary project whose overall objective is to build an integrated database, simulation, visualization, and optimization system for the proposed oxygen manufacturing plant on Mars. Specifically, the system allows users to enter physical description, engineering, and connectivity data through a uniform, user-friendly interface and stores the data in formats compatible with other software also developed as part of this project. These latter components include: (1) programs to simulate the behavior of various parts of the plant in Martian conditions; (2) an animation program which, in different modes, provides visual feedback to designers and researchers about the location of and temperature distribution among components as well as heat, mass, and data flow through the plant as it operates in different scenarios; (3) a control program to investigate the stability and response of the system under different disturbance conditions; and (4) an optimization program to maximize or minimize various criteria as the system evolves into its final design. All components of the system are interconnected so that changes entered through one component are reflected in the others.

Arabyan, A.↗

Information basis for developing comprehensive waste management system-US-Japan joint nuclear energy action plan waste management working group phase I report.

The activity of Phase I of the Waste Management Working Group under the United States - Japan Joint Nuclear Energy Action Plan started in 2007. The US-Japan JNEAP is a bilateral collaborative framework to support the global implementation of safe, secure, and sustainable, nuclear fuel cycles (referred to in this document as fuel cycles). The Waste Management Working Group was established by strong interest of both parties, which arise from the recognition that development and optimization of waste management and disposal system(s) are central issues of the present and future nuclear fuel cycles. This report summarizes the activity of the Waste Management Working Group that focused on consolidation of the existing technical basis between the U.S. and Japan and the joint development of a plan for future collaborative activities. Firstly, the political/regulatory frameworks related to nuclear fuel cycles in both countries were reviewed. The various advanced fuel cycle scenarios that have been considered in both countries were then surveyed and summarized. The working group established the working reference scenario for the future cooperative activity that corresponds to a fuel cycle scenario being considered both in Japan and the U.S. This working scenario involves transitioning from a once-through fuel cycle utilizing light water reactors to a one-pass uranium-plutonium fuel recycle in light water reactors to a combination of light water reactors and fast reactors with plutonium, uranium, and minor actinide recycle, ultimately concluding with multiple recycle passes primarily using fast reactors. Considering the scenario, current and future expected waste streams, treatment and inventory were discussed, and the relevant information was summarized. Second, the waste management/disposal system optimization was discussed. Repository system concepts were reviewed, repository design concepts for the various classifications of nuclear waste were summarized, and the factors to consider in repository design and optimization were then discussed. Japan is considering various alternatives and options for the geologic disposal facility and the framework for future analysis of repository concepts was discussed. Regarding the advanced waste and storage form development, waste form technologies developed in both countries were surveyed and compared. Potential collaboration areas and activities were next identified. Disposal system optimization processes and techniques were reviewed, and factors to consider in future repository design optimization activities were also discussed. Then the potential collaboration areas and activities related to the optimization problem were extracted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electromagnetic Effects in SDF Explosions

The notion of high ion and electron concentrations in the detonation of aluminized explosive mixtures has aroused some interest in electro-magnetic effects that the SDF charges might generate when detonated. Motivated by this interest we have started to investigate whether significant electro-magnetic effects show up in our small-scale experiments. However, the design of instrumentation for this purpose is far from straightforward, since there are a number of open questions. Thus the main aim of the feasibility tests is to find - if possible - a simple and reliable method that can be used as a diagnostic tool for electro-magnetic effects. SDF charges with a 0.5-g PETN booster and a filling of 1 g aluminum flakes have been investigated in three barometric bomb calorimeters with volumes ranging from 6.3 l to of 6.6 l. Though similar in volume, the barometric bombs differed in the length-to-diameter ratio. The tests were carried out with the bombs filled with either air or nitrogen at ambient pressure. The comparison of the test in air to those in nitrogen shows that the combustion of TNT detonation products or aluminum generates a substantial increase of the quasi-steady overpressure in the bombs. Repeated tests in the same configuration resulted in some scatter of the experimental results. The most likely reason is that the aluminum combustion in most or all cases is incomplete and that the amount of aluminum actually burned varies from test to test. The mass fraction burned apparently decreases with increasing aspect ratio L/D. Thus an L/D-ratio of about 1 is optimal for the performance of shock-dispersed-fuel combustion. However, at an L/D-ratio of about 5 the combustion still yields appreciable overpressure in excess of the detonation. For a multi-burst scenario in a tunnel environment with a number of SDF charges distributed along a tunnel section a spacing of 5 tunnel diameter and a fuel-specific volume of around 7 l/g might provide an acceptable compromise between optimizing the combustion performance and keeping the number of elementary charges low. Further tests in a barometric bomb calorimeter of 21.2 l volume were performed with four types of aluminum. The mass fraction burned in this case appeared to depend on the morphology of the aluminum particles. Flake aluminum exhibited a better performance than granulated aluminum with particle sizes ranging from below 25 {micro}m to 125 {micro}m for the coarsest material. In addition, a feasibility study on electro-magnetic effects from SDF charges detonated in a tunnel has been performed. A method was developed to measure the local, unsteady electro-conductivity in the detonation/combustion products cloud. This method proved to yield reproducible results. A variety of methods were tested with regard to probing electro-magnetic pulses from the detonation of SDF charges. The results showed little reproducibility and were small compared to the effect from pulsed high voltage discharges of comparatively small energy (around 32 J). Thus either no significant electromagnetic pulse is generated in our small-scale tests or the tested techniques have to be discarded as too insensitive or too limited in bandwidth to detect possibly very high frequency electro-magnetic disturbances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-linear MHD modelling of edge localized modes suppression by resonant magnetic perturbations in ITER

Edge localized modes (ELMs) suppression by resonant magnetic perturbations (RMPs) was studied with the non-linear magneto-hydro-dynamic (MHD) code JOREK for the ITER H-mode scenarios at 15 MA, 12.5 MA, 10 MA/5.3 T. In this study, the main aim was to demonstrate that ELMs can be suppressed by RMPs while the divertor 3D footprints of heat and particle fluxes remain within divertor material limits. The unstable peeling–ballooning modes responsible for ELMs without RMPs were modelled first for each scenario using numerically accessible parameters for ITER. Then the stabilization of ELMs by RMPs was modelled with the same parameters. RMP spectra, optimized by the linear MHD MARS-F code, with main toroidal harmonics N = 2, N = 3, N = 4 have been used as boundary conditions of the computational domain of JOREK, including realistic RMP coils, main plasma, scrape off layer (SOL) divertor and realistic first wall. The model includes all relevant plasma flows: toroidal rotation, two fluid diamagnetic effects and neoclassical poloidal friction. With RMPs, the main toroidal harmonic and the non-linearly coupled harmonics remain dominant at the plasma edge, producing saturated modes and a continuous MHD turbulent transport thereby avoiding ELM crashes in all scenarios considered here. The threshold for ELM suppression was found at a maximum RMP coils current of 45 kAt–60 kAt compared to the coils maximum capability of 90 kAt. In the high beta poloidal steady-state 10 MA/5.3 T scenario, a rotating QH-mode without ELMs was observed even without RMPs. In this scenario with RMPs N = 3, N = 4 at 20 kAt maximum current in RMP coils, similar QH-mode behaviour was observed however with dominant edge harmonic corresponding to the main toroidal number of RMPs. The present MHD modelling was limited in time by few tens of ms after RMPs were switched on until the magnetic energy of the modes saturates. As a consequence the thermal energy was still evolving on this time scale, far from the ITER confinement time scale and hence only the form of 3D footprints on the divertor targets can be indicated within this set-up. Also note, that the divertor physics was missing in this model, so realistic values of fluxes are out of reach in this modelling. However the stationary 3D divertor and particle fluxes could be simply extrapolated from these results to the stationary situation considering that a large power fraction should be radiated in the core and SOL and only about 50 MW power is going to the divertor, which is an arbitrary, but reasonable number used here. The 3D footprints with RMPs show the characteristic splitting with the main RMP toroidal symmetry. The maximum radial extension of the footprints typically was ~20 cm in inner divertor and ~40 cm in outer divertor with stationary heat fluxes decreasing further out from the initial strike point from ~5 MW m ₋2 to ~1 MW m ₋2 assuming a total power in the divertor and walls is 50 MW. The heat fluxes remain within the divertor target and baffle areas, however with rather small margin in the outer divertor which could be an issue for the first wall especially in transient regimes when part of the plasma thermal energy is released due to switching on the RMP coils. This fact should be considered when RMPs are applied with a more favorable application before or soon after the L–H transition, although optimization is required to avoid increasing the L–H power threshold with RMPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Model Assumptions and Data Characteristics: Impacts on Domain Adaptation in Building Segmentation

Studies on domain adaptation (DA) for remote sensing (RS) imagery analysis lack consistency in selection and description of evaluation scenarios. Without properly characterizing datasets, model assumptions, and evaluation scenarios, it is difficult to objectively compare DA methods and reach conclusions about their suitability across different applications. With this motivation, this work seeks to empirically assess to which extent the interaction between data characteristics and model assumptions influences the effectiveness of DA methods. Using the widely explored task of building footprint segmentation as a case study, we perform a large-scale study across over 200 DA scenarios that include variations across view angles, areas observed, and sensors used for data acquisition. Rather than adopting different model architectures or optimization criteria, we contrast the performances of two DA methods based on adversarial learning that differ only in their assumptions about source and target domains. Informed by metadata and data characteristics unveiled using traditional computer vision (CV) techniques as well as pretrained deep models, we provide a detailed meta-analysis of experiments highlighting the importance of accurately considering data assumptions for DA in RS segmentation tasks. As demonstrated by a “cherry-picking” exercise, different claims regarding which model is best could be made by selecting different subsets of evaluation scenarios. While well-calibrated assumptions can be beneficial, mismatching assumptions can lead to negative biases in DA applications. Furthermore, this study intends to motivate the community toward more consistent evaluation protocols while providing recommendations and insights toward creating novel benchmark datasets, documenting data characteristics, application-specific knowledge, and model assumptions.

42 ENGINEERING↗

Artemis I Off-Nominal-Trajectory Design and Optimization

In order to achieve the Artemis I mission objectives to human-rate the Orion spacecraft even under off-nominal conditions, trajectories were developed to handle contingency scenarios: alternate missions for contingencies before or during the Trans-Lunar Injection burn, recoveries to return Orion to the nominal trajectory after a delayed or partial burn, and abort trajectories to return the spacecraft to Earth after a critical failure. In addition, disposal trajectories were generated for situations where recovery was not an option. Details are given on the trajectory characteristics, solution families, the generation of the trajectories, and operations considerations.

Artemis I↗

Advancements in FeCrAl Alloys for Enhanced Accident Tolerant Fuel Cladding for Light Water Reactors

Advanced FeCrAl alloys are being considered as an enhanced accident tolerant fuel (ATF) cladding for light water reactor (LWR) applications as they can exhibit slower reaction kinetics with high temperature steam and have a reduced production of hydrogen during accident scenarios compared both to historic 304L cladding and Zircaloy. Both of these attributes are key towards producing a fuel-form with enhanced accident tolerance over the current Zr-based-UO{sub 2} fuel form in deployment. A multi-year, multi-laboratory effort has been established to rapidly advance FeCrAl alloys as an ATF concept. This effort has focused on optimizing the microstructure and composition of these alloys in an attempt to provide performance on-par with or better than the current Zr-based cladding in both normal operating conditions and under accident scenarios. To date, a significant database supporting key performance factors in both scenarios has been developed. Based on this database, a compositional and microstructural window has been identified providing the insight for an optimized, advanced nuclear-grade FeCrAl alloy for LWRs. This work will provide a comprehensive overview of the systematic effort to advance FeCrAl alloys as an enhanced ATF cladding in commercial LWRs. Efforts undertaken by this multi-year, multi-laboratory program have shown the viability of using FeCrAl alloys as an ATF cladding in LWRs. Most importantly, it has been shown the oxidation resistance, decreased hydrogen production, and reduced heat generation of FeCrAl alloys strongly contribute to its ATF capability. Furthermore, it has been shown that the normal operational performance of a FeCrAl cladding can rival that of Zr-based alloys. Finally, it was found that optimizing the performance of FeCrAl cladding materials requires balancing the starting composition and microstructure in order to satisfy key performance indicators such as oxidation resistance and radiation tolerance. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Method for Determining Optimal Residential Energy Efficiency Retrofit Packages

Businesses, government agencies, consumers, policy makers, and utilities currently have limited access to occupant-, building-, and location-specific recommendations for optimal energy retrofit packages, as defined by estimated costs and energy savings. This report describes an analysis method for determining optimal residential energy efficiency retrofit packages and, as an illustrative example,applies the analysis method to a 1960s-era home in eight U.S. cities covering a range of International Energy Conservation Code (IECC) climate regions. The method uses an optimization scheme that considers average energy use (determined from building energy simulations) and equivalent annual cost to recommend optimal retrofit packages specific to the building, occupants, and location. Energysavings and incremental costs are calculated relative to a minimum upgrade reference scenario, which accounts for efficiency upgrades that would occur in the absence of a retrofit because of equipment wear-out and replacement with current minimum standards.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Delay-Based Traffic Signal Control for Throughput Optimality and Fairness at an Isolated Intersection

With the attractive feature of guaranteeing maximum network throughput, backpressure routing has been widely used in wireless communication networks. Motivated by the backpressure routing, in this paper, we propose a delay-based traffic signal control algorithm in transportation networks. We prove that this delay-based control achieves optimal throughput performance, same as the queue-based traffic signal control in the literature. However, a vehicle at a lane whose queue length remains very small may be excessively delayed under the queue-based signal control. Our delay-based backpressure control can deal with the excessive delays and achieve better fairness with respect to delay while still guaranteeing throughput optimality. Moreover, a general weighted control scheme combining the queue-based and delay-based schemes is also investigated, to provide a more flexible control according to the quality of service requirements. Numerical results explore their performance under both homogeneous and heterogeneous traffic scenarios.

33 ADVANCED PROPULSION SYSTEMS↗

Optimal Control Allocation for Distributed Electric Propulsion in A Series/Parallel Partial Hybrid Powertrain

The SUbsonic Single Aft eNgine (SUSAN) Electrofan is a NASA concept transport aircraft representative of technology anticipated for a 2040 entry-into-service date. The powertrain consists of a single thrust-producing geared turbofan engine with generators driving a series/parallel partial hybrid power/propulsion system. The architecture includes 16 underwing contrarotating fans, eight on each side. The distributed fans can be used by the flight control system to augment or replace the rudder function. This paper sets up the optimal control problem of setpoint determination for individual wingfans in the distributed propulsion system, accounting for electrical string efficiencies, saturations, and failures. The solution minimizes power consumption while maintaining thrust and torque on the airframe for maneuvering. Additionally, thrust that would have been lost due to temporary fan speed or power saturation is optimally redistributed to maintain overall desired thrust and torque on the aircraft. A simulation of a coordinated turn utilizing the distributed electric propulsion for yaw rate control in a multiple wingfan failure scenario demonstrates the robustness of the powertrain design to failures and helps define its limitations.

Distributed Electric Propulsion↗

Practical Implementation of GPU-based Computing at the Grid Edge for Resilience Scenarios

This paper presents a practical implementation of GPU-accelerated computing at the grid edge to enhance power system resilience through next-generation smart meters. Advanced Metering Infrastructure (AMI) systems rely predominantly on centralized processing architectures, which limit real-time response capabilities during grid disturbances. This work proposes the integration of GPU-enabled computational platforms directly within smart meter to enable local execution support for power system analytics, fault detection algorithms, and optimization routines. The proposed framework uses the Julia programming language to leverage highperformance parallel computing capabilities while maintaining code portability and development efficiency. We use two experimental scenarios to benchmark the computational feasibility of this approach: sparse linear system solutions representative of power flow analyses, and multi-stage production cost simulations incorporating unit commitment and economic dispatch operations. Results demonstrate that computationally intensive power system algorithms, such as those supporting resilience scenario calculations, can be effectively executed at the distribution edge using commercially available embedded GPU hardware. Keywords—GPU acceleration, edge computing, smart meters, grid resilience, AMI, resilience.

De Souza, Reubun [School of Electrical Engineering↗

Optimizing invader suppression to restore native species: Leveraging species traits to overcome collateral damage

Strategies to control ongoing biological invasions are often developed by modelling the invasive species' population and aiming to reduce its abundance. However, if the ultimate objective is to protect and restore native species, focussing solely on the invader may not be optimal because it does not account for (i) species interactions that can cause the invader's impacts to depend nonlinearly on its abundance, (ii) collateral damages to native species incurred due to nonspecific removal methods or (iii) native-invader trait differences. Here, to identify an invader suppression strategy that maximizes average native population size, we applied optimal control theory to a two-species model of a native species threatened by an invasive competitor. We examined trade-offs between iterative physical removals that selectively target invaders and intensifiable chemical control that is nonselective but has higher efficacy. We found that while iterative removals were capable of supporting large native populations when applied continuously, cost could be prohibitively high. In contrast, when favourable native-invader trait differences enabled native species to re-establish more quickly than invaders, intensifiable methods could achieve substantial restoration benefits at lower cost by focussing removal effort into periodic, high-efficacy events. In a metapopulation, removals that rotated among spatial patches were optimal when the native species had higher dispersal, whereas synchronous removals were preferred when native recovery was initiated locally and the invader could disperse. For a case study in Hawaiian streams, we compared how effective two alternative methods of removing invasive live-bearing fishes (poeciliids) might be at restoring the endemic freshwater goby Sicyopterus stimpsoni. We found that rotenone (a piscicidal chemical) offered superior benefits when the control budget was small and efficacy was high, but that electrofishing (use of electricity to manually collect target fish) was better with larger budgets and in many lower-efficacy scenarios. Synthesis and applications. Our findings demonstrate that, by accounting for species interactions and collateral damage, invasive species control strategies can be optimized in light of species traits. Choices about the timing, locations and types of removal events present opportunities to increase the efficiency with which invasive species suppression benefits native species.

54 ENVIRONMENTAL SCIENCES↗

Interactions between climate change mitigation and adaptation: The case of hydropower in Brazil

In this paper we perform a multi-model comparison to assess strategies for adaptation to climate change impacts in hydropower generation in Brazil under two Representative Concentration Pathways (RCPs 4.5 and 8.5). The approach used allows for evaluating the interactions between climate change mitigation and adaptation strategies under low and high impact scenarios through 2050. Climate change impact projections of sixteen General Circulation Models (GCMs) indicate that a global emissions trajectory of an RCP 8.5 scenario would likely yield more severe impacts on hydropower generation than an RCP 4.5 scenario. Adaptation modeling suggests that climate change impacts can be compensated by a wide range of alternatives, whose optimality will depend on the level of mitigation effort pursued. Our results show that climate change impacts would lead to even higher emissions in the absence of climate change mitigation policies. On the other hand, mitigation strategies to pursue lower emissions are maintained under climate change impact shocks, meaning that mitigation strategies are robust when faced with adaptation challenges. Mitigation efforts could yield a more diverse and less carbon intensive mix of technological options for adaptation. When including investment costs to adapt to climate change impacts, in some cases mitigation can lead to a lower total investment level.

Lucena, André F. P.↗

Exploring sustainable electricity system development pathways in South America’s MERCOSUR sub-region

South America has abundant natural water and energy resources, and exploiting these resources to achieve a clean energy future is central to the continent’s economic and sustainable development objectives for the next several decades. Designing pathways to achieving this clean energy future requires better understanding the structural, techno-economic, and policy forces that may influence the future development of the electricity sector in the region. Here, we focus on an interconnected electricity system of five South American countries – Argentina, Brazil, Chile, Paraguay, and Uruguay – which represent major electricity generation, consumption, and trade dynamics in the region. We explore the implications of various forces that could shape the future composition of the power sector in the sub-region, including: evolving renewable energy cost and performance, natural gas prices, cross-border interconnection facilities, early retirement of installed hydropower, and different decarbonization goals. We use a model framework based on a power system planning platform (GridPath) to co-optimize investment and operations of generation, storage, and transmission facilities out to 2050. Our results in a Reference scenario indicate that the electricity system can maintain a relatively clean energy portfolio by leveraging existing hydropower capacity and integrating increasingly cost-competitive wind and solar power. However, dependence on natural gas in the region is likely to remain high. A low-carbon electricity system can cost-effectively be achieved through policy interventions (e.g., renewable portfolio standards) and by diversifying investments in wind, solar, battery storage, and some new hydropower capacity. We also find that existing hydropower is critical for maintaining reliable future grid operations. Enhanced regional electricity trade, mostly based on existing interconnection capacities with nominal investment in new transmission, can significantly benefit the clean energy transition in the region.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗