Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pair distribution function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Structural Changes in Vitreous GeSe4 under Pressure

High-energy X-ray diffraction experiments have been performed on GeSe{sub 4} glass up to pressures of 8.6 GPa, and the equation of state has been measured up to 10 GPa. The X-ray structure factors reveal a decrease in the first sharp diffraction peak intensity and broadening with pressure, which signifies a break-up of the intermediate range order in the glass. In contrast, the principal peak in the structure factor shows an increase in intensity and a sharpening with pressure, which is attributed to an increase in extended range order and coherence of the compacted units. The average nearest neighbor coordination number is found to remain constant in GeSe{sub 4} glass (within experimental error) over the pressure range measured. This is in contrast with the gradual increase found in GeSe{sub 2} glass. Rather, in GeSe{sub 4} glass the densification mechanism is shown to be associated with large inward shifts of the second neighbor and higher coordination shells. These features appear as additional correlations at 3.3 and 5.3 {angstrom} in the differences taken between adjacent pair distribution functions with increasing pressure.

36 MATERIALS SCIENCE↗

Polymorphism in Photoluminescent KNdW2O8: Synthesis, Neutron Diffraction, and Raman Study

Polymorphs of KNdW2O8 ( -KNdW2O8 and -KNdW2O8) phosphors were synthesized by an efficient solution combustion technique for the first time. The crystal structure of the polymorphs analyzed from Rietveld refinement of neutron diffraction data confirms that -KNdW2O8 crystallizes in the tetragonal system (space group I4 ), and -KNdW2O8 crystallizes in the monoclinic system (space group C2/m). The local structure of both polymorphs was elucidated using combined neutron pair distribution function (PDF) and Raman scattering techniques. Photoluminescence measurements of the polymorphs showed broadened emission line width and increased intensity for -KNdW2O8 in the visible region compared to -KNdW2O8. This phenomenon is attributed to the increased distortion in the coordination environment of the luminescing Nd3+ ion. Combined PDF, Rietveld, and Raman measurements reveal distortions of the WO6 octahedra and NdO8 polyhedra in -KNdW2O8. This crystal structure photoluminescence study suggests that this class of tungstates can be exploited for visible light emitting devices by tuning the crystal symmetry.

Swain, Diptikanta↗

Structural Analysis of Novel Lignin-derived Carbon Composite Anodes

The development of novel lignin-based carbon composite anodes consisting of nanocrystalline and amorphous domains motivates the understanding of a relationship of the structural properties characterizing these materials, such as crystallite size, intracrystallite dspacing, crystalline volume fraction and composite density, with their pair distribution functions (PDF), obtained from both molecular dynamics simulation and neutron scattering. A model for these composite materials is developed as a function of experimentally measurable parameters and realized in fifteen composite systems, three of which directly match all parameters of their experimental counterparts. The accurate reproduction of the experimental PDFs using the model systems validates the model. The decomposition of the simulated PDFs provides an understanding of each feature in the PDF and allows for the development of a mapping between the defining characteristics of the PDF and the material properties of interest.

McNutt, Nicholas W↗

Transmission-geometry electrochemical cell for in-situ scattering and spectroscopy investigations

The present invention relates to a test chamber that can be used to perform a variety of X-ray and neutron spectroscopy experiments including powder diffraction, small-angle scattering, X-ray absorption spectroscopy, and pair distribution functions, such chamber comprising a first electrode with an X-ray transparent window; a second electrode with an X-ray transparent window; a plurality of insulating gaskets providing a hermetic seal around the sample and preventing contact between said first and second electrodes; and an insulating housing into which the first electrode is secured.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Porous electrodes for spectroelectrochemistry and x-ray structure analyses

An electrochemical cell that allows for in-situ structural characterization of amorphous thin film materials during the course of electrolysis using high-energy X-ray scattering (>50 keV). The compact and versatile cell employs a three-electrode configuration and minimizes X-ray scattering contributions from the cell, reference and counter electrodes, as well as the working electrode support. A large surface area working electrode has a physically robust support and is largely transparent to X-rays. This design, which utilizes a three-dimensional working electrode, also greatly improves the intensity and quality of the scattered signal compared to a two-dimensional working electrode. The in-situ cell can be used not only to investigate structural evolution during electrolysis using X-ray scattering (e.g. pair distribution function), but also to perform electrochemical potential-dependent structural analysis by extended X-ray absorption fine structure.

Kwon, Gihan↗

Industrialization of Hydrogen Getter for Nuclear Waste Transportation Application - 18189

The hydrogen risk generated by radiolysis of organic compounds during a nuclear waste transport is a major issue. The use of irreversible getters is considered to limit this risk. We previously worked on MnO{sub 2}/Ag{sub 2}O getter, in order to better understand the trapping phenomenon and to ensure its reliability. We demonstrated that chemisorption of hydrogen, which is required for its application, has been shown by using several characterization techniques. Proton insertion mechanism in MnO{sub 2} has been elucidated by pair distribution function analysis. Gamma irradiation up to 4 MGy has been performed on MnO{sub 2}/Ag{sub 2}O hydrogen getter and shown that chemical and crystallographic properties are not influenced under gamma irradiation. After those fundamentals studies, industrialization of MnO{sub 2}/Ag{sub 2}O getter preparation has been studied in order to have available getter materials for industrial applications with large amounts of MnO{sub 2}/Ag{sub 2}O powder. The preparation of hydrogen getter at laboratory scale consists of mixing commercial powders with various chemical treatments (grounding, moistening, sonication and drying). The industrialization strategy consists of preparing firstly on a laboratory scale and then increasing the getter preparation up to several kilograms. At each preparation step, hydrogen trapping experiments are performed to confirm the expected performance of getter materials. Several characterizations techniques have been performed (X-Ray Diffraction, Specific Surface Area...) to analyse the properties of the getter and have shown that no impact of upscale preparation is evidenced. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structural Properties of Ditechnetium Heptoxide, Tc{sub 2}O{sub 7}

Group 7 elements form unique binary oxides with the stoichiometry M{sub 2}O{sub 7}. The heptoxides of manganese and technetium crystallize as molecular solids while rhenium forms an extended solid with mixed valances, 4 and 6. Unlike manganese and rhenium heptoxides which are used in the chemical industry technetium heptoxide has found very few applications due to its radioactive nature; it has been primarily use as a chemical precursor. While both of the molecular solids, Mn{sub 2}O{sub 7}{sup 3} and Tc{sub 2}O{sub 7}{sup 4} can be described by two corner-sharing MO{sub 4} tetrahedron. The most distinctive difference is that the manganese's compound has a metal-oxygen-metal bond angle of 120.7 deg. while the technetium species is 180 deg.. Additionally, Tc{sub 2}O{sub 7} has the largest molar volume of the heptoxides which suggest that it will be more susceptible to external stimuli of pressure and temperature than the others heptoxides. A pressure induced twisting has been predicted by Fang et al. Anomalous behavior is seen in the c-axis where below 2 GPa the Van der Waals interactions between the Tc{sub 2}O{sub 7} molecules is over come and compression is observed but at higher pressures the twisted distortion forces the lattice to expand. The terminology diagonal-double tetrahedrons (DDTs) is introduced to discuss the molecules of Tc{sub 2}O{sub 7}. The rigid nature of the DDTs has been attributed to the cause of this twisted distortion mechanism. Recently, the solid state and gas phase behavior of technetium heptoxide was revisited by Childs et al. in light of {sup 99}Tc being an important dose contributor in the Hanford waste and vitrification being proposed for immobilization of nuclear waste. Technetium heptoxide is one of the proposed volatilized species of technetium found in the vitrification process. In this study the crystal structure of Tc{sub 2}O{sub 7} was reported at 100 K and compared to the structure first determined by Krebs at room temperature. Inspection of the metal-oxygen distances revealed the 100 K structure had longer bond lengths for the bridging oxygen than at high temperature. It is suggested that transverse thermal vibrational modes can be used to explain this negative thermal expansion behavior. This describes the average bond length of a central atom (i.e. the bridging oxygen atom) being measured as shorter at higher temperatures due to the larger thermal motion. Diffraction methods that measure the long range average structure are susceptible to observing this shorter average length as opposed to the true bond length, atom position at oscillation node that a method like Pair-Distribution Functional PDF Analysis would yield. In the case of Tc{sub 2}O{sub 7}, the magnitude of the transverse thermal vibrational mode is at the limit of being detectable by SCXRD and likely not observable by PDF analysis. Here we report the preliminary results of our study on the nature of the thermal expansion behavior of Tc{sub 2}O{sub 7}. The transverse thermal vibration mode compression mechanism is considered and compared to the pressure induced twisted distortion mechanism predicted at high pressure. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Local Structure of La1-xSrxCoO3 determined from EXAFS and neutron PDF studies

The combined local structure techniques, extended x-ray absorption fine structure (EXAFS) and neutron pair distribution function analysis, have been used for temperatures 4<= T<= 330 K to rule out a large Jahn-Teller (JT) distortion of the Co-O bond in La1?xSrxCoO3 for a significant fraction of Co sites (x<= 0.35), indicating few, if any, JT-active, singly occupied eg Co sites exist.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence for Magnetic Dimerons in the Anisotrophic Bilayer System La(1.2)Sr(1.8)Mn(2)O(7) : An EXAFS Study

A temperature-dependent EXAFS investigation of La{sub 1.2}Sr{sub 1.8}Mn{sub 2}O{sub 7}, with x rays polarized parallel to the c axis and in the ab plane, has shown an extremely sharp and anisotropic jump in the broadening {sigma} of the Mn-O pair-distribution function (PDF) near the ferromagnetic transition temperature, T{sub c}. This jump is associated with an increase in Jahn-Teller (JT) distortions as the temperature increases through T{sub c}. The data show that changes in {sigma}{sup 2} as T is lowered below T{sub c} is linearly correlated with the sample magnetization, and that there is a break in the slope of this correlation when the sample is -80% magnetized, consistent with the recently proposed dimeron model. A JT distortion clearly exists well above T{sub c} and some distortions still remain for a range of temperatures below T{sub c}. In agreement with recent work on the La{sub 1-x}Ca{sub x}MnO{sub 3} (LCMO) system, the data indicate that two types of distorted sites must occur; one is associated with the hole charge carriers (two-site polaron called a dimeron) and has a very small distortion/site; the second is associated with unpaired electron sites and has a similar distortion/site as observed for corresponding sites in LCMO. Furthermore, the broadening of the Mn-O PDF shows a second and more subtle increase above T{sub c} near T*{approx}250 K, a change in structure that correlates well with features in several other experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Formalism for the determination of structural isotope effects with neutrons

In general the analysis of neutron isotopic substitution experiments in terms of partial structure factors and partial pair distribution functions is based on the assumption that the structure of isotopic variants of a molecule is identical. This assumption is clearly only an approximation especially in the case of hydrogen bonding molecular liquids like liquid water and structural isotope effects have been measured with X-rays for more than 20 years. A analysis method of neutron isotope data is presented that avoids the necessity to assume structural equality and allows the determination of the isotope effect in the hydrogen-hydrogen partial structure factor of liquid water from neutron data. It is shown that a combination of X-ray and neutron scattering measurements allows in principle the determination of the isotope effects on all all partials structure factors of liquid water.

08 HYDROGEN↗

Neutron diffraction and first principles computational studies CuLixMg2-x, CuMg2 and Cu2Mg (x=k0.08)

A small addition of Li changes the orthorhombic structure of CuMg2 to hexagonal CuLixMg2-x (x = 0.08). Determining the Li content of the ternary phase and Li atomic positions was our main objective for this work. For this reason we performed neutron diffraction at several different temperatures below and above room temperature. The results obtained on two neutron powder diffractometers were compared with X-ray diffraction (XRD) data, and with first principles calculations. The first principles calculations are in good agreement with Rietveld-refined data from neutron diffraction, but do not show a marked preference for one of several possible Li sites. The Pair Distribution Function (PDF) fitting is consistent with Li substituting only Mg1 (1/2, 0, z). Interstitial spaces in the structure of CuMg2 and of CuLixMg2-x were also considered, but are unlikely to be occupied by Li. Neutron diffraction data for binary CuMg2 and Cu2Mg were also obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ Characterization of CuFe2O4 and Cu/Fe3O4 Water-Gas Shift Catalysts

Mixtures of copper and iron oxides are used as industrial catalysts for the water-gas shift (WGS, CO + H2O → H2 + CO2). In-situ time-resolved X-ray diffraction, X-ray absorption fine structure, and atomic pair distribution function analysis were used to study the reduction of CuFe2O4 with CO and the behavior of CuFe2O4 and Cu/Fe2O3 catalysts under WGS reaction conditions. Metal↔oxygen↔metal interactions enhance the stability of Cu2+ and Fe3+ in the CuFe2O4 lattice, and the mixed-metal oxide is much more difficult to reduce than CuO or Fe2O3. Furthermore, after heating mixtures of CuFe2O4/CuO in the presence of CO or CO/H2O, the cations of CuO migrate into octahedral sites of the CuFe2O4 lattice at temperatures (200-250 oC) in which CuO is not stable. Above 250 oC, copper leaves the oxide, the occupancy of the octahedral sites in CuFe2O4 decreases, and diffraction lines for metallic Cu appear. From 350 to 450 oC, there is a massive reduction of CuFe2O4 with the formation of metallic Cu and Fe3O4. At this point, the sample becomes catalytically active for the production of H2 from the reaction of H2O with CO. Neutral Cu0 (i.e. no Cu+1 or Cu+2 cations) is the active species in the catalysts, but interactions with the oxide support are necessary in order to obtain high catalytic activity. These studies illustrate the importance of in-situ characterization when dealing with mixed-metal oxide WGS catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A combined fit of total scattering and extended x-ray absorption fine structure data for local-structure determination in crystalline materials

Reverse Monte Carlo (RMC) refinements of local structure using a simultaneous fit of X-ray/neutron total scattering and extended X-ray absorption fine structure (EXAFS) data were developed to incorporate an explicit treatment of both single- and multiple-scattering contributions to EXAFS. The refinement algorithm, implemented as an extension to the public domain computer software RMCProfile, enables accurate modeling of EXAFS over distances encompassing several coordination shells around the absorbing species. The approach was first tested on Ni, which exhibits extensive multiple scattering in EXAFS, and then applied to perovskite-like SrAl{sub 1/2}Nb{sub 1/2}O{sub 3}. This compound crystal1izes with a cubic double-perovskite structure but presents a challenge for local-structure determination using a total pair-distribution function (PDF) alone because of overlapping peaks of the constituent partial PDFs (e.g. Al-O and Nb-O or Sr-O and O-O). The results obtained here suggest that the combined use of the total scattering and EXAFS data provides sufficient constraints for RMC refinements to recover fine details of local structure in complex perovskites. Among other results, it was found that the probability density distribution for Sr in SrAl{sub 1/2}Nb{sub 1/2}O{sub 3} adopts T{sub d} point-group symmetry for the Sr sites, determined by the ordered arrangement of Al and Nb, as opposed to a spherical distribution commonly assumed in traditional Rietveld refinements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In Situ Characterization of CuFe2O4 and Cu/Fe3O4 Water-Gas Shift Catalysts

Mixtures of copper and iron oxides are used as industrial catalysts for the water-gas shift (WGS, CO + H2O f H2 + CO2). In-situ time-resolved X-ray diffraction, X-ray absorption fine structure, and atomic pair distribution function analysis were used to study the reduction of CuFe2O4 with CO and the behavior of CuFe2O4 and Cu/Fe2O3 catalysts under WGS reaction conditions. MetalToxygenTmetal interactions enhance the stability of Cu 2+ and Fe 3+ in the CuFe2O4 lattice, and the mixed-metal oxide is much more difficult to reduce than CuO or Fe2O3. Furthermore, after heating mixtures of CuFe2O4/CuO in the presence of CO or CO/H2O, the cations of CuO migrate into octahedral sites of the CuFe2O4 lattice at temperatures (200-250 C) in which CuO is not stable. Above 250 C, copper leaves the oxide, the occupancy of the octahedral sites in CuFe2O4 decreases, and diffraction lines for metallic Cu appear. From 350 to 450 C, there is a massive reduction of CuFe2O4 with the formation of metallic Cu and Fe3O4. At this point, the sample becomes catalytically active for the production of H2 from the reaction of H2O with CO. Neutral Cu 0 (i.e., no Cu 1+ or Cu 2+ cations) is the active species in the catalysts, but interactions with the oxide support cannot be neglected. These studies illustrate the importance of in situ characterization when dealing with mixed-metal oxide WGS catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PLASMA EFFECTS ON FAST PAIR BEAMS. II. REACTIVE VERSUS KINETIC INSTABILITY OF PARALLEL ELECTROSTATIC WAVES

The interaction of TeV gamma-rays from distant blazars with the extragalactic background light produces relativistic electron-positron pair beams by the photon-photon annihilation process. Using the linear instability analysis in the kinetic limit, which properly accounts for the longitudinal and the small but finite perpendicular momentum spread in the pair momentum distribution function, the growth rate of parallel propagating electrostatic oscillations in the intergalactic medium is calculated. Contrary to the claims of Miniati and Elyiv, we find that neither the longitudinal nor the perpendicular spread in the relativistic pair distribution function significantly affect the electrostatic growth rates. The maximum kinetic growth rate for no perpendicular spread is even about an order of magnitude greater than the corresponding reactive maximum growth rate. The reduction factors in the maximum growth rate due to the finite perpendicular spread in the pair distribution function are tiny and always less than 10{sup –4}. We confirm earlier conclusions by Broderick et al. and our group that the created pair beam distribution function is quickly unstable in the unmagnetized intergalactic medium. Therefore, there is no need to require the existence of small intergalactic magnetic fields to scatter the produced pairs, so that the explanation (made by several authors) for the Fermi non-detection of the inverse Compton scattered GeV gamma-rays by a finite deflecting intergalactic magnetic field is not necessary. In particular, the various derived lower bounds for the intergalactic magnetic fields are invalid due to the pair beam instability argument.

79 ASTRONOMY AND ASTROPHYSICS↗

Scattering functions of Platonic solids

In this report the single-particle scattering properties of five Platonic solids, including tetrahedron, hexahedron, octahedron, dodecahedron and icosahedron, are investigated in a systematic manner. For each given geometry, the Debye spatial autocorrelation function (r), pair distance distribution function (PDDF) p (r) and intraparticle structure factor (form factor) P (Q) are respectively calculated and compared to the corresponding scattering function of the spherical referential system. Based on our theoretical models, the empirical relationship between the dodecahedral and icosahedral structural characteristics and those of the equivalent spheres is found. Moreover, the single-particle scattering properties of the icosahedral and the spherical shells with the same volume are further investigated and the prospect of using different data analysis approaches to explore their structural difference is also presented and discussed.

36 MATERIALS SCIENCE↗

Characterization of zirconium carbide microspheres synthesized via internal gelation

Microspheres of zirconium carbide with grain size 40-320 nm were synthesized using internal gelation techniques and characterized by scanning electron microscopy, synchrotron X-ray diffraction, and neutron total scattering. Compared with a polycrystalline benchmark ZrC sample prepared by plasma vapor phase deposition, the microspheres display lower variance in grain size and considerably lower microstrain representative of a more homogenous internal microstructure. However, excess carbon was present in the microspheres, evident in both the X-ray and neutron diffraction data as well as a corresponding hypostoichiometric ZrC phase. Furthermore, the excess carbon phase is assumed to be pockets of carbon that remained unreacted through the combined internal gelation and subsequent carbothermic reduction synthesis process. Atomic-scale structural characterization with neutron PDF analysis confirmed the presence of localized nano-sized domains of graphite-like carbon material.

36 MATERIALS SCIENCE↗