Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Magnetorheological effect in the magnetic field oriented along the vorticity

In this work, we have studied the magnetorheological (MR) fluid rheology in the magnetic field parallel to the fluid vorticity. Experimentally, the MR fluid flow was realized in the Couette coaxial cylinder geometry with the magnetic field parallel to the symmetry axis. The rheological measurements were compared to those obtained in the cone-plate geometry with the magnetic field perpendicular to the lower rheometer plate. Experiments revealed a quasi-Bingham behavior in both geometries with the stress level being just a few dozens of percent smaller in the Couette cylindrical geometry at the same internal magnetic field. The unexpectedly high MR response in the magnetic field parallel to the fluid vorticity is explained by stochastic fluctuations of positions and orientations of the particle aggregates. These fluctuations are induced by magnetic interactions between them. Once misaligned from the vorticity direction, the aggregates generate a high stress independent of the shear rate, and thus assimilated to the suspension apparent (dynamic) yield stress. Quantitatively, the fluctuations of the aggregate orientation are modeled as a rotary diffusion process with a diffusion constant proportional to the mean square interaction torque. The model gives a satisfactory agreement with the experimental field dependency of the apparent yield stress and confirms the nearly quadratic concentration dependency σ{sub Y}∝Φ{sup 2.2}, revealed in experiments. The practical interest of this study lies in the development of MR smart devices with the magnetic field nonperpendicular to the channel walls.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Blocks and residual stresses in sapphire rods of different crystallographic orientations grown by the Stepanov method

The formation of blocks in shaped sapphire rods of two crystallographic orientations has been investigated. It is shown that, when growth occurs in the direction of the optical c axis, blocks are formed with a higher probability than in the case of growth in the a direction. A model of formation of blocks in rods of different orientations is proposed. The distribution of residual stresses over sapphire rod cross sections is measured by conoscopy. It is found that stresses increase from the middle of a rod to its periphery and reach 20 MPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orientation features of {sup 24}Mg(2+) aligned nuclei in (p, p) and (d, d) reactions at E{sub x} ≈ 7.5 MeV per nucleon

Experimental angular dependences of cross sections for elastic and inelastic scattering and the result obtained by reconstructing the populations of magnetic sublevels, multipole-moment orientation tensors, and polarization tensors are presented for {sup 24}Mg (2{sup +}, 1.369 MeV) aligned nuclei produced in inelastic proton scattering at E{sub p} = 7.4 MeV. The experimental results in question are compared with the results of calculations based on the coupled-channel method and on the compound-nucleus model, the 3/2{sup +} resonance in the {sup 25}Al compound nucleus being taken into account. The orientation features of {sup 24}Mg (2{sup +}, 1.369 MeV) nuclei produced in inelastic proton and deuteron scattering on {sup 24}Mg at E{sub x} ≈ 7.5 MeV per nucleon are found to be generally similar despite a substantial difference in the respective differential cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Goal-Oriented Optimal Approximations of Bayesian Linear Inverse Problems

We propose optimal dimensionality reduction techniques for the solution of goal-oriented linear-Gaussian inverse problems, where the quantity of interest (QoI) is a function of the inversion parameters. These approximations are suitable for large-scale applications. In particular, we study the approximation of the posterior covariance of the QoI as a low-rank negative update of its prior covariance and prove optimality of this update with respect to the natural geodesic distance on the manifold of symmetric positive definite matrices. Assuming exact knowledge of the posterior mean of the QoI, the optimality results extend to optimality in distribution with respect to the Kullback--Leibler divergence and the Hellinger distance between the associated distributions. We also propose the approximation of the posterior mean of the QoI as a low-rank linear function of the data and prove optimality of this approximation with respect to a weighted Bayes risk. Both of these optimal approximations avoid the explicit computation of the full posterior distribution of the parameters and instead focus on directions that are well informed by the data and relevant to the QoI. These directions stem from a balance among all the components of the goal-oriented inverse problem: prior information, forward model, measurement noise, and ultimate goals. We illustrate the theory using a high-dimensional inverse problem in heat transfer.

97 MATHEMATICS AND COMPUTING↗

Myosin head orientation: a structural determinant for the Frank-Starling relationship

The cellular mechanism underlying the Frank-Starling law of the heart is myofilament length-dependent activation. The mechanism(s) whereby sarcomeres detect changes in length and translate this into increased sensitivity to activating calcium has been elusive. Small-angle X-ray diffraction studies have revealed that the intact myofilament lattice undergoes numerous structural changes upon an increase in sarcomere length (SL): lattice spacing and the I{sub 1,1}/I{sub 1,0} intensity ratio decreases, whereas the M3 meridional reflection intensity (I{sub M3}) increases, concomitant with increases in diastolic and systolic force. Using a short ({approx}10 ms) X-ray exposure just before electrical stimulation, we were able to obtain detailed structural information regarding the effects of external osmotic compression (with mannitol) and obtain SL on thin intact electrically stimulated isolated rat right ventricular trabeculae. We show that over the same incremental increases in SL, the relative changes in systolic force track more closely to the relative changes in myosin head orientation (as reported by IM3) than to the relative changes in lattice spacing. We conclude that myosin head orientation before activation determines myocardial sarcomere activation levels and that this may be the dominant mechanism for length-dependent activation.

59 BASIC BIOLOGICAL SCIENCES↗

Linking preferred orientations to elastic anisotropy in Muderong Shale, Australia

The significance of shales as unconventional hydrocarbon reservoirs, nuclear waste repositories, and geological carbon storage has opened new research frontiers in geophysics. Among many of its unique physical properties, elastic anisotropy has long been investigated by both experimental and computational approaches. Here we calculate elastic properties of Cretaceous Muderong Shale from Australia with a self-consistent averaging method based on microstructural information. The volume fraction and crystallographic preferred orientation distributions of constituent minerals are based on synchrotron X-ray diffraction experiments. Aspect ratios of minerals and pores, determined from scanning electron microscopy (SEM), are introduced in the self-consistent averaging. Our analysis suggests that phyllosilicates (i.e., illite-mica, illite-smectite, kaolinite, and chlorite) are dominant with ~70 vol.%. The shape of clay platelets displays an average aspect ratio of 0.05. These platelets are aligned parallel to the bedding plane with a rather high degree of preferred orientation. The estimated porosity at ambient pressure is ~17 vol.% and is divided into equiaxial pores and flat pores with an average aspect ratio of 0.01. Our model shows results (e.g. at pressure of ~50 MPa with C 11 = 26.3; C 13 =12.5; C 33 = 18.2; C 44 = 2.8; C 66 = 6.8 [GPa]) that compare satisfactorily with values derived from ultrasonic velocity measurements (C 11 = 26.6; C 13 = 16.2; C 33 = 18.3; C 44 = 4.5; C 66 = 8.8 [GPa]), confirming the validity and reliability of our approximations and averaging approach.

58 GEOSCIENCES↗

EGS Collab Testbed 2 Preliminary Test Wells Locations and Orientations

The EGS Collab project is evaluating a site for Experiment 2 (hydraulic fracturing/shearing) at a depth of 1.25 km in the Sanford Underground Research Facility (SURF) on the 4100 Level. Two early test holes were drilled in an alcove (formerly known as Battery Charging Station) near Yates Shaft. One of the test hole is about 50 m where as the other hole is about 10 m. This submission package includes well head locations, total lengths of boreholes, their orientations (gyro data). The reported boreholes orientation data were primarily obtained with REFLEX GYRO (TM) survey right after the completion of each hole. Well head locations were ascertained by Laser/LiDAR survey of the drift around the Testbed 2. Note: The coordinate system used is local Homestake Mine Coordinate (HMC) system from an old gold mine that was in operation for over 100 years.

15 GEOTHERMAL ENERGY↗

Effects of the crystallographic orientation of Sn on the electromigration of Cu/Sn-Ag-Cu/Cu ball joints

Electromigration behavior and fast circuit failure with respect to crystallographic orientation of Sn grains were examined. The test vehicle was Cu/Sn-3.0 wt% Ag-0.5 wt% Cu/Cu ball joints, and the applied current density was 15 kA/cm 2 at 160 °C. The experimental results indicate that most of the solder bumps show different microstructural changes with respect to the crystallographic orientation of Sn grains. Fast failure of the bump occurred due to the dissolution of the Cu circuit on the cathode side caused by the fast interstitial diffusion of Cu atoms along the c-axis of the Sn grains when the c-axis was parallel to the electron flow. Slight microstructural changes were observed when the c-axis was perpendicular to the electron flow. In addition, Cu 6 Sn 5 intermetallic compound (IMC) was formed along the direction of the c-axis of the Sn grains instead of the direction of electron flow in all solder ball joints.

36 MATERIALS SCIENCE↗

The His-tag as a decoy modulating preferred orientation in cryoEM

The His-tag is a widely used affinity tag that facilitates purification by means of affinity chromatography of recombinant proteins for functional and structural studies. We show here that His-tag presence affects how coproheme decarboxylase interacts with the air-water interface during grid preparation for cryoEM. Depending on His-tag presence or absence, we observe significant changes in patterns of preferred orientation. Our analysis of particle orientations suggests that His-tag presence can mask the hydrophobic and hydrophilic patches on a protein’s surface that mediate the interactions with the air-water interface, while the hydrophobic linker between a His-tag and the coding sequence of the protein may enhance other interactions with the air-water interface. Our observations suggest that tagging, including rational design of the linkers between an affinity tag and a protein of interest, offer a promising approach to modulating interactions with the air-water interface.

59 BASIC BIOLOGICAL SCIENCES↗

The Effect of Planetary Albedo on Solar Orientation of Spacecraft

The analytical expression for the solar orientation error caused by planetary albedo is derived. A typical solar sensor output characteristic is assumed and a computer solution to the analytical is obtained. The computer results are presented for a spacecraft in the vicinity of Earth, Venus, Mars, and the Moon. Each planetary body is assumed to be a spherical diffuse reflector with cylindrical shadows and a constant albedo. The data generated herein permit the selection of an appropriate coarse-sensor to fine-sensor switching angle for solar orientation control systems and facilitate the the interpretation of solar-referenced scientific experiment data.

SPACE ORIENTATION↗

Haptic cues for orientation and postural control in sighted and blind individuals

Haptic cues from fingertip contact with a stable surface attenuate body sway in subjects even when the contact forces are too small to provide physical support of the body. We investigated how haptic cues derived from contact of a cane with a stationary surface at low force levels aids postural control in sighted and congenitally blind individuals. Five sighted (eyes closed) and five congenitally blind subjects maintained a tandem Romberg stance in five conditions: (1) no cane; (2,3) touch contact (< 2 N of applied force) while holding the cane in a vertical or slanted orientation; and (4,5) force contact (as much force as desired) in the vertical and slanted orientations. Touch contact of a cane at force levels below those necessary to provide significant physical stabilization was as effective as force contact in reducing postural sway in all subjects, compared to the no-cane condition. A slanted cane was far more effective in reducing postural sway than was a perpendicular cane. Cane use also decreased head displacement of sighted subjects far more than that of blind subjects. These results suggest that head movement control is linked to postural control through gaze stabilization reflexes in sighted subjects; such reflexes are absent in congenitally blind individuals and may account for their higher levels of head displacement.

NASA Discipline Neuroscience↗

Aspect-Oriented Monitoring of C Programs

The paper presents current work on extending ASPECTC with state machines, resulting in a framework for aspect-oriented monitoring of C programs. Such a framework can be used for testing purposes, or it can be part of a fault protection strategy. The long term goal is to explore the synergy between the fields of runtime verification, focused on program monitoring, and aspect-oriented programming, focused on more general program development issues. The work is inspired by the observation that most work in this direction has been done for JAVA, partly due to the lack of easily accessible extensible compiler frameworks for C. The work is performed using the SILVER extensible attribute grammar compiler framework, in which C has been defined as a host language. Our work consists of extending C with ASPECTC, and subsequently to extend ASPECTC with state machines.

runtime verifications↗

Service Oriented Robotic Architecture for Space Robotics: Design, Testing, and Lessons Learned

This paper presents the lessons learned from six years of experiments with planetary rover prototypes running the Service Oriented Robotic Architecture (SORA) developed by the Intelligent Robotics Group (IRG) at the NASA Ames Research Center. SORA relies on proven software engineering methods and technologies applied to space robotics. Based on a Service Oriented Architecture and robust middleware, SORA encompasses on-board robot control and a full suite of software tools necessary for remotely operated exploration missions. SORA has been eld tested in numerous scenarios of robotic lunar and planetary exploration. The experiments conducted by IRG with SORA exercise a large set of the constraints encountered in space applications: remote robotic assets, ight relevant science instruments, distributed operations, high network latencies and unreliable or intermittent communication links. In this paper, we present the results of these eld tests in regard to the developed architecture, and discuss its bene ts and limitations.

service oriented architecture↗

Combinations of Earth Orientation Measurements: COMB94 and POLE94

A Kalman filter has been used to combine Earth orientation measurements taken by optical astrometry with SPACE94, a previously determined combination of Earth orientation measurements taken by space-geodetic techniques. This created two series of combined, smoothed, and interpolated polar motion: COMB94 covering 1962-1995 at 5-day intervals, and POLE94 covering 1900 to 1995 at 30.4375-day intervals.

Earth↗

A low-temperature sample orienting device for single crystal spectroscopy at the SNS

A low temperature sample orientation device providing three axes of rotation has been successfully built and is in testing for use on several spectrometers at the spallation neutron source (SNS). Sample rotation about the vertical ({omega}) axis of nearly 360{sup o} and out of plane tilts ({phi} and {nu}) of from -3.4{sup o} to 4.4{sup o} and from -2.8{sup o} to 3.5{sup o}, respectively, are possible. An off-the-shelf closed cycle refrigerator (CCR) is mounted on a room temperature sealed rotary flange providing {omega} rotations of the sample. Out-of-plane tilts are made possible by piezoelectric actuated angular positioning devices mounted on the low temperature head of the CCR. Novel encoding devices based on magnetoresistive sensors have been developed to measure the tilt stage angles. This combination facilitates single crystal investigations from room temperature to 3.1 K. Commissioning experiments of the rotating CCR for both powder and single crystal samples have been performed on the ARCS spectrometer at the SNS. For the powder sample this device was used to continuously rotate the sample and thus average out any partial orientation of the powder. The powder rings observed in S(Q) are presented. For the single crystal sample, the rotation was used to probe different regions of momentum transfer (Q-space). Laue patterns obtained from a single crystal sample at two rotation angles are presented.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Strategies for reducing preferred orientation and strain in powder samples for high-pressure synchrotron X-ray diffraction in diamond-anvil cells

Among the many problems associated with high-pressure X-ray diffraction from polycrystalline samples in the diamond-anvil cell are strain and preferred orientation. A method is presented for efficiently reducing preferred orientation of powder samples compressed in diamond-anvil cells to pressures in excess of 20 GPa. This method may be successfully applied to samples of yield strength higher than alkalihalides. In addition, the problem of strain is discussed using ice-VII as an example and as an illustration of the importance of laser heating as a method of minimizing strain.

36 MATERIALS SCIENCE↗

Oriented hydroxyapatite in turkey tendon mineralized via the polymer-induced liquid-precursor (PILP) process

Bone is a hierarchically structured composite which imparts it with unique mechanical properties and bioresorptive potential. These properties are primarily influenced by the underlying nanostructure of bone, which consists of nanocrystals of hydroxyapatite embedded and uniaxially aligned within collagen fibrils. There is also a small fraction of non-collagenous proteins in bone, and these are thought to play an important role in bone's formation. In our in vitro model system of bone formation, polyanionic peptides are used to mimic the role of the non-collagenous proteins. In our prior studies, we have shown that intrafibrillar mineralization can be achieved in synthetic reconstituted collagen sponges using a polymer-induced liquid-precursor (PILP) mineralization process. This led to a nanostructured arrangement of hydroxyapatite crystals within the individual fibrils which closely mimics that of bone. This report demonstrates that biogenic collagen scaffolds obtained from turkey tendon, which consist of densely packed and oriented collagen fibrils, can also be mineralized by the PILP process. Synchrotron X-ray diffraction studies show that the mineralization process leads to a high degree of crystallographic orientation at the macroscale, thus emulating that found in the biological system of naturally mineralizing turkey tendon.

36 MATERIALS SCIENCE↗

Study of YBCO tape anisotropy as a function of field, field orientation and operating temperature

Superconducting magnets with magnetic fields above 20 T will be needed for a Muon Collider and possible LHC energy upgrade. This field level exceeds the possibilities of traditional Low Temperature Superconductors (LTS) such as Nb{sub 3}Sn and Nb{sub 3}Al. Presently the use of high field high temperature superconductors (HTS) is the only option available for achieving such field levels. Commercially available YBCO comes in tapes and shows noticeable anisotropy with respect to field orientation, which needs to be accounted for during magnet design. In the present work, critical current test results are presented for YBCO tape manufactured by Bruker. Short sample measurements results are presented up to 14 T, assessing the level of anisotropy as a function of field, field orientation and operating temperature.

43 PARTICLE ACCELERATORS↗