Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monotonicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

On rotational forces in the solar wind

Solar rotational forces affecting the flow of minor ions in the solar wind are considered as corotating with the sun. Cold, noninteracting charged particles in the magnetic and gravitational fields of the sun rotate with the angular velocity of the sun, and calculations of lowest bulk order velocities show that differences in particle velocities decrease with increasing distance from the sun. A centrifugal potential in the corotating frame implies that ion motion is independent of protons, with velocities determined by the potential, which monotonically decreases without limit. The potential dominates the initial kinetic energy of the particles, and the equality of velocities within the potential is not due to interactions between particles as claimed by Mackenzie et al. (1979).

Hollweg, J. V.↗
NASA NTRS1982

The heavy element yields of neutron capture nucleosynthesis

Consideration of the contribution made to the abundances of the heavy element isotopes by the S- and R-processes of nucleosynthesis has led to the determination that the previous assumption concerning the exclusive alignment of isobars to one or the other of these processes is probably in error. If the relatively small odd and even mass number abundance fluctuations characterizing R-process abundances are always the case, as assumed by this study, S-process contributions to the abundances of R-process isobars are substantial, consistent with transient flashing episodes in the S-process neutron production processes. A smooth and monotonically-decreasing curve of the abundance of the S-process yields times the neutron capture cross-section versus mass number is therefore the primary tool for the separation of the abundances due to the two processes.

Cameron, A. G. W.↗
NASA NTRS1982

High-resolution photographs in the rocket ultraviolet of the Orion Nebula

High-resolution photographs of the Orion Nebula have been obtained in UV bands centered near 1400, 1820, 2240 and 2620 by a 31-cm telescope mounted on an Astrobee sounding rocket. Reduction of the data by image processing, photometric calibration and error analysis steps was used to derive a matrix of values of specific intensity in absolute units. Data indicate that the Orion Nebula is primarily a reflection nebula in the UV, so that morphology is determined by the distribution of dust with respect to the illuminating stars. Ultraviolet color gradients for each color relative to the 1820-A image indicate reddening towards the outer parts of the nebula, as well as fairly symmetric dust scattering in the Theta 1 and Theta 2 Ori region. The color gradients also imply a monotonic change in scattering phase function asymmetry between 2620 and 1400 A. Total nebular flux in each bandpass is observed to be about 2.5 times the stellar flux from the Trapezium, indicating a high scattering efficiency.

Bohlin, R. C.↗
NASA NTRS1982

Time-marching transonic flutter solutions including angle-of-attack effects

Transonic aeroelastic solutions based upon the transonic small perturbation potential equation are studied. Time-marching transient solutions of plunging and pitching airfoils are analyzed using a complex exponential modal identification technique, and seven alternative integration techniques for the structural equations are evaluated. The HYTRAN2 code is used to determine transonic flutter boundaries versus Mach number and angle-of-attack for NACA 64A010 and MBB A-3 airfoils. In that code, a monotone differencing method, which eliminates leading edge expansion shocks, is used to solve the potential equation. When the effect of static pitching moment upon the angle-of-attack is included, the MBB A-3 airfoil can have multiple flutter speeds at a given Mach number.

Edwards, J. W.↗
NASA NTRS1982

Pole-strength of the earth from Magsat and magnetic determination of the core radius

A model based on two days of Magsat data is used to numerically evaluate the unsigned magnetic flux linking the earth's surface, and a comparison of the 16.054 GWb value calculated with values from earlier geomagnetic field models reveals a smooth, monotonic, and recently-accelerating decrease in the earth's pole strength at a 50-year average rate of 8.3 MWb, or 0.052%/year. Hide's (1978) magnetic technique for determining the radius of the earth's electrically-conducting core is tested by (1) extrapolating main field models for 1960 and 1965 downward through the nearly-insulating mantle, and then separately comparing them to equivalent, extrapolated models of Magsat data. The two unsigned fluxes are found to equal the Magsat values at a radius which is within 2% of the core radius; and (2) the 1960 main field and secular variation and acceleration coefficients are used to derive models of 1930, 1940 and 1950. The same core magnetic radius value, within 2% of the seismic value, is obtained. It is concluded that the mantle is a nearly-perfect insulator, while the core is a perfect conductor, on the decade time scale.

Voorhies, G. V.↗
NASA NTRS1982

Analysis and design of steady transonic flow over airfoils by the method of parametric differentiation

The results reported here are based on applying the method of parametric differentiation (MPD) to transform the nonlinear differential equation governing small-disturbance transonic flow to a linear equation. Implicit approximate factorization and monotone methods were used to accelerate convergence of the linear problem by an order of magnitude over successive line over-relaxation. The relative merits of using MPD are discussed in comparison to conventional small-disturbance applications. Several MPD analyses are performed on an array of airfoils. A design procedure utilizing MPD is discussed and demonstrated for two nonlifting cases.

Halt, D. W.↗
NASA NTRS1982

Heterogeneous growth of meteorites and planets, especially the earth and moon

It is pointed out that enough information remains in meteorites to show that the solar nebula was chemically inhomogeneous, and that it did not develop under physical and chemical equilibrium. It is found that the earth is not in chemical equilibrium, and that it still retains vestiges of its heterogeneous growth in spite of prolonged convection and volcanism. The present investigation has the aim to unify simple ideas into a comprehensive, complex scheme for heterogeneous growth of the planets and parent bodies of meteorites. A scheme is considered for the conversion of dust and gas in the solar nebula into the present population of bodies. Attention is given to possible processes for the growth and development of planetesimals from dust via clouds, the major episodes in the development of the solar system, the relation of meteorites to a solar nebula with monotonic variation of temperature and oxidation state, the significance of meteorite properties, the composition of the inner planets, and the development of the earth.

Smith, J. V.↗
NASA NTRS1982

The solar wind interaction with Mars as seen by the Viking retarding potential analyzers

Both energy spectra and continuous monitoring periods of the total flux above 15 eV are available, from Viking retarding potential analyzer measurements of electron fluxes not exceeding 75 eV out to 16,000 km above the Mars surface. Although the mean electron current at energies above 15 eV increases monotonically by almost two orders of magnitude from 9000 to 700 km in Viking 1 data, no clear signature of the bow shock is seen. Total current wave power shows a peak near 1700 km altitude. It is suggested that there may be a highly turbulent shock structure masking a clear signature of the bow shock in the time-averaged data, and it is concluded that the interaction model consistent with the bow shock at 1700 km, together with ionosphere measurements, indicates a permanent magnetic field able to stand off the solar wind during the Viking 1 entry.

Cragin, B. L.↗
NASA NTRS1982

A study of the diffuse galactic gamma radiation

Assuming cosmic rays pervade the Galaxy, they necessarily produced high energy gamma-rays as they interact with the instellar matter and photons. The cosmic ray nucleon interactions five rise to gamma rays primarily through the decay of pi mesons, giving a unique spectrum with a maximum at approximately 68 MeV. Cosmic ray electrons produce gamma rays through bremsstrahlung, but with a markedly different energy spectral shape, one which decreases monotonically with energy. Cosmic ray electrons also interact with the interstellar starlight, optical and infrared photons, and the blackbody radiation through the Compton process. A model of galactic gamma ray production is discussed, and the predicted spatial distribution and energy spectra are presented. Considering the uncertainty in the point source contributions, the agreement between the theoretical predictions and the gamma ray data seems quite reasonable.

Fichtel, C. E.↗
NASA NTRS1982

Finite-element analysis of initiation, stable crack growth and instability using a crack-tip-opening displacement criterion

An elastic-plastic (incremental and small strain) finite element analysis was used with a crack growth criterion to study crack initiation, stable crack growth, and instability under monotonic loading to failure of metallic materials. The crack growth criterion was a critical crack-tip-opening displacement (CTOD) at a specified distance from the crack tip, or equivalently, a critical crack-tip-opening angle (CTOA). Whenever the CTOD (or CTOA) equaled or exceeded a critical value, the crack was assumed to grow. Single values of critical CTOD were used in the analysis to model crack initiation, stable crack growth, and instability for 7075-T651 and 2024-T351 aluminum alloy compact specimens. Calculated and experimentally measured CTOD values at initiation agreed well for both aluminum alloys. These critical CTOD values were also used to predict failure loads on center-crack tension specimens and a specially-designed three-hole-crack tension specimen made of the two aluminum alloys and of 304 stainless steel. All specimens were 12.7 mm thick. Predicted failure loads for 7075-T651 aluminum alloy and 304 stainless steel specimens were generally within + or - 15 percent of experimental failure loads, whereas the predicted failure loads for 2024-T351 aluminum alloy specimens were generally within + or - 5 percent of the experimental loads.

Newman, J. C., Jr.↗
NASA NTRS1982

A Poisson process approximation for generalized K-5 confidence regions

One-sided confidence regions for continuous cumulative distribution functions are constructed using empirical cumulative distribution functions and the generalized Kolmogorov-Smirnov distance. The band width of such regions becomes narrower in the right or left tail of the distribution. To avoid tedious computation of confidence levels and critical values, an approximation based on the Poisson process is introduced. This aproximation provides a conservative confidence region; moreover, the approximation error decreases monotonically to 0 as sample size increases. Critical values necessary for implementation are given. Applications are made to the areas of risk analysis, investment modeling, reliability assessment, and analysis of fault tolerant systems.

Arsham, H.↗
NASA NTRS1983

Crack layer morphology and toughness characterization in steels

Both the macro studies of crack layer propagation are presented. The crack extension resistance parameter R sub 1 based on the morphological study of microdefects is introduced. Experimental study of the history dependent nature of G sub c supports the representation of G sub c as a product of specific enthalpy of damage (material constant) and R sub 1. The latter accounts for the history dependence. The observation of nonmonotonic crack growth under monotonic changes of J as well as statistical features of the critical energy release rate (variance of G sub c) indicate the validity of the proposed damage characterization.

Chudnovsky, A.↗
NASA NTRS1983

Fracture in compression of brittle solids

The fracture of brittle solids in monotonic compression is reviewed from both the mechanistic and phenomenological points of view. The fundamental theoretical developments based on the extension of pre-existing cracks in general multiaxial stress fields are recognized as explaining extrinsic behavior where a single crack is responsible for the final failure. In contrast, shear faulting in compression is recognized to be the result of an evolutionary localization process involving en echelon action of cracks and is termed intrinsic.

Source record↗
NASA NTRS1983

Tensile and Compressive Constitutive Response of 316 Stainless Steel at Elevated Temperatures

Creep rate in compression is lower by factors of 2 to 10 than in tension if the microstructure of the two specimens is the same and are tested at equal temperatures and equal but opposite stresses. Such behavior is characteristic for monotonic creep and conditions involving cyclic creep. In the latter case creep rate in both tension and compression progressively increases from cycle to cycle, rendering questionable the possibility of expressing a time stabilized constitutive relationship. The difference in creep rates in tension and compression is considerably reduced if the tension specimen is first subjected to cycles of tensile creep (reversed by compressive plasticity), while the compression specimen is first subjected to cycles of compressive creep (reversed by tensile plasticity). In both cases, the test temperature is the same and the stresses are equal and opposite. Such reduction is a reflection of differences in microstructure of the specimens resulting from different prior mechanical history.

Manson, S. S.↗
NASA NTRS1983

A Unified Constitutive Relationship for the Time-dependent Behavior of Fast Breeder Alloys

Constitutive equations based on classical concepts of creep and plasticity generally rest on the assumption that the inelastic strain can be decomposed into two distinct and additive contributions, one time dependent (creep) and the other time dependent (plastic). It is suggested that an approach is to adopt a unified representation in which creep and plasticity are characterized as occurring simultaneously and interactively and time is an essential ingredient throughout. Examples of the inherent time dependency exhibited by some fast breeder alloys at elevated temperature are rate dependency under monotonic and cyclic straining, thermal recovery and strong creep-elasticity interaction. The stron influence of the recent history of plastic straining on stress relaxation is shown.

Robinson, D. N.↗
NASA NTRS1983

Constrained Self-adaptive Solutions Procedures for Structure Subject to High Temperature Elastic-plastic Creep Effects

This paper will develop a new solution strategy which can handle elastic-plastic-creep problems in an inherently stable manner. This is achieved by introducing a new constrained time stepping algorithm which will enable the solution of creep initiated pre/postbuckling behavior where indefinite tangent stiffnesses are encountered. Due to the generality of the scheme, both monotone and cyclic loading histories can be handled. The presentation will give a thorough overview of current solution schemes and their short comings, the development of constrained time stepping algorithms as well as illustrate the results of several numerical experiments which benchmark the new procedure.

Padovan, J.↗
NASA NTRS1983

Fluid signatures of rotational discontinuities at Earth's magnetopause

Fluid signatures in the MHD approximation at rotational discontinuities (RD) of finite width called rotational shear layers (RSL) are examined for general flow and magnetic geometries. Analytical and geometrical arguments illustrate that the fluid speed can either go up or down across an RSL for a fixed normal mass flux. The speed profile may or may not be monotonic depending on the boundary conditions. The flow velocity may or may not be field aligned or ""jetting'' as a result of traversing the RSL. In general, significant ""convection'' is expected in the layer. The observable signatures of (MHD) RSL's depend on 7 (boundary condition) parameters are (1) the mass density, (2 to 5) the incident normal and transverse components of the magnetic field and fluid velocity, (6) the angle epsilon between the incident tangential flow velocity and tangential magnetic field, and (7) the size of the magnetic angular rotation implemented by the layer delta phi.

Scudder, J. D.↗
NASA NTRS1982

Sorption of noble gases by solids, with reference to meteorites. I - Magnetite and carbon

The trapping of meteoritic noble gases by solids is simulated through the synthesis of 18 Fe3O4 samples at 350-720 K in a noble gas atmosphere, by means of the reactions: (1) 3Fe + 4H2O yields Fe3O4 + 4H2, using Ne, Ar, Kr and Xe; and (2) 3Fe + 4CO yields Fe3O4 + 4C + carbides, using Xe. Etching experiments suggest an analogy with 'Phase Q' in meteorites. Adsorbed atmospheric gases are present in all samples, and dominate whenever the noble gas partial pressure in the atmosphere is greater than that in the synthesis. While many of the results of Lancet and Anders (1973) appear to have been dominated by such an atmospheric component, others are suspect. When the doubtful samples of Lancet and Anders are corrected or eliminated, the fractionation pattern no longer peaks at Ar, but rather, as in the present sample, rises monotonically from Ne to Xe. No evidence is found for the earlier study's claim of a strong temperature dependence.

Yang, J.↗