Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesh”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Navier-Stokes Simulation of UH-60A Rotor/Wake Interaction Using Adaptive Mesh Refinement

Time-dependent Navier-Stokes simulations have been carried out for a flexible UH-60A rotor in forward flight, where the rotor wake interacts with the rotor blades. These flow conditions involved blade vortex interaction and dynamic stall, two common conditions that occur as modern helicopter designs strive to achieve greater flight speeds and payload capacity. These numerical simulations utilized high-order spatial accuracy and delayed detached eddy simulation. Emphasis was placed on understanding how improved rotor wake resolution affects the prediction of the normal force, pitching moment, and chord force of the rotor. Adaptive mesh refinement was used to highly resolve the turbulent rotor wake in a computationally efficient manner. Moreover, blade vortex interaction was found to trigger dynamic stall. Time-dependent flow visualization was utilized to provide an improved understanding of the numerical and physical mechanisms involved with three-dimensional dynamic stall.

UH-60A RotorWake↗

An Underlay Communication Channel for 5G Cognitive Mesh Networks: Packet Design, Implementation, Analysis, and Experimental Results

This paper proposes and presents the design and implementation of an underlay communication channel (UCC) for 5G cognitive mesh networks. The UCC builds its waveform based on filter bank multicarrier spread spectrum (FB-MCSS) signaling. The use of this novel spread spectrum signaling allows the device-to-device (D2D) user equipments (UEs) to communicate at a level well below noise temperature and hence, minimize taxation on macro-cell/small-cell base stations and their UEs in 5G wireless systems. Moreover, the use of filter banks allows us to avoid those portions of the spectrum that are in use by macro-cell and small-cell users. Hence, both D2D-to-cellular and cellular-to-D2D interference will be very close to none. We propose a specific packet for UCC and develop algorithms for packet detection, timing acquisition and tracking, as well as channel estimation and equalization. We also present the detail of an implementation of the proposed transceiver on a software radio platform and compare our experimental results with those from a theoretical analysis of our packet detection algorithm.

cognitive networks↗

Adaptive Mesh Refinement Large Eddy Simulation of the Supercritical Carbon Dioxide Round Turbulent Jet

Supercritical carbon dioxide (sCO2) is of interest to a range of engineering problems, including carbon capture, utilization, and storage (CCUS) as well as advanced cycles for power generation. Non-ideal variations in physical properties of sCO2 impact the physics of these systems. In this study, we simulate turbulent sCO2 jets to gain a better understanding of these physics.We use a second order finite volume method with adaptive mesh refinement as implemented in the first-principles simulation code PeleC to perform a Large Eddy Simulation (LES) of three turbulent jets of sCO2. Additionally, we use the Soave-Redlich-Kwong equation of state to close the system and examine the impact of a cubic equation of state on the turbulent flow physics. We look at velocity and Reynolds stress profiles at different downstream locations for three cases in which the temperature of the jet andthat of the ambient fluid differ in order to capture the effects of widely varying thermal properties in the pseudocritical region. These results are then contrasted with established theory for ideal gas jets.

adaptive mesh refinement↗

Mesh generation and energy group condensation studies for the jaguar deterministic transport code

The deterministic transport code Jaguar is introduced, and the modeling process for Jaguar is demonstrated using a two-dimensional assembly model of the Hoogenboom-Martin Performance Benchmark Problem. This single assembly model is being used to test and analyze optimal modeling methodologies and techniques for Jaguar. This paper focuses on spatial mesh generation and energy condensation techniques. In this summary, the models and processes are defined as well as thermal flux solution comparisons with the Monte Carlo code MC21. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Application of linear prolongation to coarse mesh finite difference acceleration in CASMO5

The Coarse-Mesh Finite Difference (CMFD) method has been used for over a decade to accelerate the convergence of the Method of Characteristics (MOC) solution to the two- dimensional particle transport equation in CASMO5. Numerical testing, along with widespread use in production-level calculations, have shown that the current CMFD implementation provides stability and robustness for a wide range of realistic reactor physics problems. However, the recent development of linear prolongation has attracted attention from the community as a way to further improve the performance and stability of CMFD. Two interpolation methods for linear prolongation are presented in this work and implemented into a test version of CASMO5. The performance of the proposed interpolations, referred to as the bilinear and linear directional schemes, is evaluated in terms of runtime relative to the default constant or uniform scaling update. Numerical results indicate that the use of linear prolongation can reduce the transport solver runtime on average by approximately 10% when tested with two hundred randomly selected cases. The new directional linear interpolation, combined with default constant boundary updates, is found to provide the highest reduction in runtime for the cases analyzed. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Three-Dimensional Parallel Adaptive Mesh Refinement Simulations of Shock-Driven Turbulent Mixing in Plane and Converging Geometries

This paper presents the use of a dynamically adaptive mesh refinement strategy for the simulations of shock-driven turbulent mixing. Large-eddy simulations are necessary due the high Reynolds number turbulent regime. In this approach, the large scales are simulated directly and small scales at which the viscous dissipation occurs are modeled. A low-numerical centered finite-difference scheme is used in turbulent flow regions while a shock-capturing method is employed to capture shocks. Three-dimensional parallel simulations of the Richtmyer-Meshkov instability performed in plane and converging geometries are described.

42 ENGINEERING↗

Coordinate transformation and construction of finite element mesh in a diverted tokamak geometry

A coordinate transformation technique between straight magnetic field line coordinate system (Ψ, θ) and Cartesian coordinate system (R, Z) is presented employing a Solov'ev solution of the Grad-Shafranov equation. Employing the equilibrium solution, the poloidal magnetic flux Ψ(R, Z) of a diverted tokamak, magnetic field line equation is solved computationally to find curves of constant poloidal angle θ, which provides us with explicit relations R = R(Ψ, θ) and Z = Z(Ψ, θ). Correspondingly, conversion from one coordinate to the other along particle trajectories in the vicinity of separatrix is demonstrated. Based on the magnetic structure, a finite element mesh is generated in a diverted tokamak geometry to solve Poisson's equation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance analysis of a 3D unstructured mesh hydrodynamics code on multi‐core and many‐core architectures

SUMMARY Several next generation high performance computing platforms are or will be based on the so‐called many‐core architectures, which represent a significant departure from commodity multi‐core architectures. A key issue in transitioning large‐scale simulation codes from multi‐core to many‐core systems is closing the serial performance gap, that is, overcoming the large difference in single‐core performance between multi‐core and many‐core systems. In this paper, we discuss how this problem was addressed for a 3D unstructured mesh hydrodynamics code, describe how Amdahl's law can be used to estimate performance targets and guide optimization efforts, and present timing studies performed on multi‐core and many‐core platforms. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Waltz, J.↗

Continuous Counter‐Current Microfluidic Liquid–Liquid Extraction Achieved Using a Pair of Wettable Screen Meshes

Continuous counter‐current microfluidic liquid–liquid extraction performs separations by flowing immiscible liquids in opposing directions within a single flow channel. In principle, this flow arrangement enables a large number of theoretical separation units in a small footprint, without using interstage valving, pumping, and phase separation. Despite its potential for excellent separation performance, this microfluidic scheme rarely appears in literature due to the requirement for capillary forces to be greater than hydrodynamic forces for stable flow. We present a novel microfluidic device and flow approaches that overcome this force‐balance challenge, enabling stable, long‐duration continuous counter‐current flow. Additionally, we cover a suite of methodologies for quantifying the performance of the microfluidic device, revealing the number of theoretical equilibrium stages achieved. The enabling technologies include a woven mesh screen‐based microfluidic device architecture that is easily fabricated outside of a clean room, surface functionalization strategies to promote conjugate (organic/aqueous) wettability, flow approaches to eliminate bubbles and carryover, and computer‐aided flow automation with optical measurement of extraction performance. The reported experiments lasted for over 36 h, terminated only at experiment conclusion, where the device still exhibited good performance. Automated Raman spectroscopy was used for solute quantitation of the ternary system tert‐butanol in a toluene/water matrix, a ternary system that was specifically chosen to analyze the device's performance with a small solute partition ratio and to enable in‐line Raman measurements of solute concentrations in both phases. The microfluidic device possessed a 55 mm contact length and a 38.5 µL internal volume. During counter‐current flow, we observed approximately 37 equilibrium stages (37 ± 13) based on a best‐fit of the solute fraction remaining in the aqueous phase using a Kremser Group Method analysis.

36 MATERIALS SCIENCE↗

Early Embolization After Carotid Artery Stenting with Mesh-Covered Stent: Role of Diffusion-Weighted Magnetic Resonance Imaging as Pre-procedural Predictor and Discriminant Between Intra- and Post-procedural Events

Objectives: To evaluate the incidence and the time of onset of early micro-embolism after CAS (carotid artery stenting) with two different mesh-covered stents and to assess the role of DW-MRI (Diffusion-weighted magnetic resonance imaging) in their prediction. Methods: Single-institution prospective study including 50 patients (33 male, median age 74 years) who underwent CAS with Roadsaver{sup ®} or CGuard™. All patients with primary stenosis (37/50, 74%) had carotid plaque DW-MRI pre-procedure, with both qualitative evaluation of the hyperintensity and ADC (apparent diffusion coefficient) measurement of the plaque. All patients had brain DW-MRI pre-procedure, at 1 h, 24 h and 30 days post-procedure to evaluate the appearance of hyperintense lesions over time. Imaging analysis was performed in a double-blinded fashion by two radiologists. Results: There were no statistically significant differences between the two stents both in the incidence at 1 h (P = 0.23) and 24 h (P = 0.36) and in the volume of new DWI hyperintense brain lesions at 24 h (P = 0.27). Thirty-four new asymptomatic lesions in 19 patients (38%) were reported: 4 (11.8%) at 1 h, 30 (88.2%) at 24 h. The 30-day DWI-MR showed complete resolution of all lesions and no evidence of new lesion. The incidence of new lesions at 24 h resulted significantly higher in patients with DWI hyperintense carotid plaques (12/16, 75% vs. 0/21, 0%, P < 0.0001). This result was paralleled by the difference in ADC value (0.83 ± 0.21 vs. 1.42 ± 0.52). Conclusion: The majority of early asymptomatic brain lesion occurred during the first 24 h after CAS. Pre-procedure high DWI signal of the plaque was associated with an increased incidence of post-procedure microembolizations.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Formation and Transportation of an Intense Sub-Millisecond Electron Beam in a Longitudinal Magnetic Field in the Source with a Mesh Plasma Cathode

The limiting parameters of an intense sub-millisecond electron beam generated in the source with a plasma cathode on the basis of a low-pressure multi-arc discharge with mesh stabilization of the cathode (emission) plasma boundary and mobile anode (beam) plasma boundary are investigated. It is demonstrated that the limiting parameters of the electron beam in the examined electrode system are limited by its energy content on a level of about 4 kJ the excess of which leads to an electric breakdown of the accelerating gap. The optimal pressures are determined at which the beam during its transportation in the longitudinal magnetic field with a preset configuration has maximal parameters for the given electrode system. Different mechanisms of electric breakdown initiation and methods for increasing the electric strength of the high-voltage accelerating gap in this electrode system are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scalar energy fluctuations in Large-Eddy Simulation of turbulent flames: Statistical budgets and mesh quality criterion

Large-Eddy Simulation (LES) provides space-filtered quantities to compare with measurements, which usually have been obtained using a different filtering operation; hence, numerical and experimental results can be examined side-by-side in a statistical sense only. Instantaneous, space-filtered and statistically time-averaged signals feature different characteristic length-scales, which can be combined in dimensionless ratios. From two canonical manufactured turbulent solutions, a turbulent flame and a passive scalar turbulent mixing layer, the critical values of these ratios under which measured and computed variances (resolved plus sub-grid scale) can be compared without resorting to additional residual terms are first determined. It is shown that actual Direct Numerical Simulation can hardly accommodate a sufficiently large range of length-scales to perform statistical studies of LES filtered reactive scalar-fields energy budget based on sub-grid scale variances; an estimation of the minimum Reynolds number allowing for such DNS studies is given. From these developments, a reliability mesh criterion emerges for scalar LES and scaling for scalar sub-grid scale energy is discussed. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adaptive mesh based combustion simulations of direct fuel injection effects in a supersonic cavity flame-holder

Here, we present high-fidelity reacting simulations of a supersonic cavity flame-holder configuration. The focus of this work is on flame stabilization brought about by varying the location of fuel injection in a cavity stabilized supersonic flow of air. Central to our approach is a compressible multi-species reacting flow solver that uses adaptive-mesh-refinement (AMR), enabling the resolution of flame, shock-waves, boundary-layers, and small-scale structures in the computational domain. Our analysis indicates that fuel injection closer to the ramp at the aft end of the cavity allows for greater mixing and lower peak temperatures compared to fuel injection upstream that is closer to the backward facing step of the cavity. This difference is mainly due to greater turbulent fluctuations generated from the shear-layer towards the cavity ramp, thereby enhancing the mixing of fuel and air. A low frequency oscillatory behaviour in heat-release and pressure was also observed for the upstream injection case while a much higher-frequency phenomena was observed in the near-ramp injection case. By identifying the important physical determinants of the combustion processes, this study illustrates a promising pathway to design and optimize direct fuel injection strategies in supersonic cavity flame-holders that can improve flame stability, combustion efficiency, and reduce emissions.

42 ENGINEERING↗

Implementing Molecular Dynamics on Hybrid High Performance Computers - Particle-Particle Particle-Mesh

The use of accelerators such as graphics processing units (GPUs) has become popular in scientific computing applications due to their low cost, impressive floating-point capabilities, high memory bandwidth, and low electrical power requirements. Hybrid high-performance computers, machines with nodes containing more than one type of floating-point processor (e.g. CPU and GPU), are now becoming more prevalent due to these advantages. In this paper, we present a continuation of previous work implementing algorithms for using accelerators into the LAMMPS molecular dynamics software for distributed memory parallel hybrid machines. In our previous work, we focused on acceleration for short-range models with an approach intended to harness the processing power of both the accelerator and (multi-core) CPUs. To augment the existing implementations, we present an efficient implementation of long-range electrostatic force calculation for molecular dynamics. Specifically, we present an implementation of the particle-particle particle-mesh method based on the work by Harvey and De Fabritiis. We present benchmark results on the Keeneland InfiniBand GPU cluster. We provide a performance comparison of the same kernels compiled with both CUDA and OpenCL. We discuss limitations to parallel efficiency and future directions for improving performance on hybrid or heterogeneous computers.

97 MATHEMATICS AND COMPUTING↗

A mesh-free convex approximation scheme for Kohn-Sham density functional theory

Density functional theory developed by Hohenberg, Kohn and Sham is a widely accepted, reliable ab initio method. We present a non-periodic, real space, mesh-free convex approximation scheme for Kohn-Sham density functional theory. We rewrite the original variational problem as a saddle point problem and discretize it using basis functions which form the Pareto optimum between competing objectives of maximizing entropy and minimizing the total width of the approximation scheme. We show the utility of the approximation scheme in performing both all-electron and pseudopotential calculations, the results of which are in good agreement with literature.

97 MATHEMATICS AND COMPUTING↗

WENO schemes on arbitrary unstructured meshes for laminar, transitional and turbulent flows

This paper presents the development and implementation of weighted-essentially-non-oscillatory (WENO) schemes for viscous flows on arbitrary unstructured grids. WENO schemes up to fifth-order accurate have been implemented in conjunction with hybrid and non-hybrid unstructured grids. The schemes are investigated with reference to numerical and experimental results for the Taylor–Green vortex, as well as for laminar and turbulent flows around a sphere, and the turbulent shock-wave boundary layer interaction flow problem. The results show that the accuracy of the schemes depends on the arbitrariness of shape and orientation of the unstructured mesh elements, as well as the compactness of directional stencils. The WENO schemes provide a more accurate numerical framework compared to second-order and third-order total variation diminishing (TVD) methods, however, the fifth-order version of the schemes is computationally too expensive to make the schemes practically usable. On the other hand, the third-order variant offers an excellent numerical framework in terms of accuracy and computational cost compared to the fifth-order WENO and second-order TVD schemes. Parallelisation of the CFD code (henceforth labelled as UCNS3D), where the schemes have been implemented, shows that the present methods offer very good scalable performance.

42 ENGINEERING↗

Discontinuous diffusion synthetic acceleration for S{sub n} transport on 2D arbitrary polygonal meshes

In this paper, a Diffusion Synthetic Acceleration (DSA) technique applied to the S{sub n} radiation transport equation is developed using Piece-Wise Linear Discontinuous (PWLD) finite elements on arbitrary polygonal grids. The discretization of the DSA equations employs an Interior Penalty technique, as is classically done for the stabilization of the diffusion equation using discontinuous finite element approximations. The penalty method yields a system of linear equations that is Symmetric Positive Definite (SPD). Thus, solution techniques such as Preconditioned Conjugate Gradient (PCG) can be effectively employed. Algebraic MultiGrid (AMG) and Symmetric Gauss–Seidel (SGS) are employed as conjugate gradient preconditioners for the DSA system. AMG is shown to be significantly more efficient than SGS. Fourier analyses are carried out and we show that this discontinuous finite element DSA scheme is always stable and effective at reducing the spectral radius for iterative transport solves, even for grids with high-aspect ratio cells. Numerical results are presented for different grid types: quadrilateral, hexagonal, and polygonal grids as well as grids with local mesh adaptivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A mesh partitioning algorithm for preserving spatial locality in arbitrary geometries

Highlights: •An algorithm for partitioning computational meshes is proposed. •The Morton order space-filling curve is modified to achieve improved locality. •A spatial locality metric is defined to compare results with existing approaches. •Results indicate improved performance of the algorithm in complex geometries. -- Abstract: A space-filling curve (SFC) is a proximity preserving linear mapping of any multi-dimensional space and is widely used as a clustering tool. Equi-sized partitioning of an SFC ignores the loss in clustering quality that occurs due to inaccuracies in the mapping. Often, this results in poor locality within partitions, especially for the conceptually simple, Morton order curves. We present a heuristic that improves partition locality in arbitrary geometries by slicing a Morton order curve at points where spatial locality is sacrificed. In addition, we develop algorithms that evenly distribute points to the extent possible while maintaining spatial locality. A metric is defined to estimate relative inter-partition contact as an indicator of communication in parallel computing architectures. Domain partitioning tests have been conducted on geometries relevant to turbulent reactive flow simulations. The results obtained highlight the performance of our method as an unsupervised and computationally inexpensive domain partitioning tool.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗