Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials aging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Dynamic cycling enhances battery lifetime

Laboratory aging campaigns benchmark and elucidate the complex degradation behavior of lithium-ion batteries, and are critical not only for developing new battery chemistries and cell designs but also for engineering reliable battery management systems. Critically, these laboratory experiments aim to quantify and capture realistic aging mechanisms. In this study, we systematically compare dynamic discharge profiles representative of electric vehicle driving to the well-accepted constant-current profiles. Surprisingly, we discovered that dynamic discharge enhances lifetime substantially compared to constant current discharge. Specifically, for the same average current and voltage window, varying the dynamic discharge profile leads to an increase of up to 38 % in equivalent full cycles at end-of-life. Explainable machine learning reveals the importance of low-frequency current pulses as well as time-induced aging under these realistic discharge conditions. Our work quantifies the importance of evaluating new battery chemistries and designs with realistic load profiles, and highlights the opportunities to revisit our understanding of aging mechanisms at the chemistry, materials, and cell levels.

25 ENERGY STORAGE↗

EVIDENCE FOR MAGNESIUM ISOTOPE HETEROGENEITY IN THE SOLAR PROTOPLANETARY DISK

With a half-life of 0.73 Myr, the {sup 26}Al-to-{sup 26}Mg decay system is the most widely used short-lived chronometer for understanding the formation and earliest evolution of the solar protoplanetary disk. However, the validity of {sup 26}Al-{sup 26}Mg ages of meteorites and their components relies on the critical assumption that the canonical {sup 26}Al/{sup 27}Al ratio of {approx}5 x 10{sup -5} recorded by the oldest dated solids, calcium-aluminium-rich inclusions (CAIs), represents the initial abundance of {sup 26}Al for the solar system as a whole. Here, we report high-precision Mg-isotope measurements of inner solar system solids, asteroids, and planets demonstrating the existence of widespread heterogeneity in the mass-independent {sup 26}Mg composition ({mu}{sup 26}Mg*) of bulk solar system reservoirs with solar or near-solar Al/Mg ratios. This variability may represent heterogeneity in the initial abundance of {sup 26}Al across the solar protoplanetary disk at the time of CAI formation and/or Mg-isotope heterogeneity. By comparing the U-Pb and {sup 26}Al-{sup 26}Mg ages of pristine solar system materials, we infer that the bulk of the {mu}{sup 26}Mg* variability reflects heterogeneity in the initial abundance of {sup 26}Al across the solar protoplanetary disk. We conclude that the canonical value of {approx}5 x 10{sup -5} represents the average initial abundance of {sup 26}Al only in the CAI-forming region, and that large-scale heterogeneity-perhaps up to 80% of the canonical value-may have existed throughout the inner solar system. If correct, our interpretation of the Mg-isotope composition of inner solar system objects precludes the use of the {sup 26}Al-{sup 26}Mg system as an accurate early solar system chronometer.

79 ASTRONOMY AND ASTROPHYSICS↗

Silicone Elastomers with Novel Modified Filler for Increased Radiation Resistance

Radiation induced chemical aging behavior in filled silicone elastomers results in a decreased mechanical performance over time. This report describes chemical methodologies to reduce radiation aging via a surfacemodified filler. Four different modified fillers were incorporated into a silicone polymer matrix and subjected to accelerated radiation aging. Fillers modified with aryl group such as phenyl, styrl, and napthyl functionality should improve the radiation aging behavior of the composite material. A series of analytical methodologies were applied to determine the efficacy of the modified filler approach as a mitigation strategy for radiation damage. The results support that phenyl and napthyl modified fillers mitigated radiation damage when compared to control samples and samples with hexyl (non-aryl) modified filler.

36 MATERIALS SCIENCE↗

FY21 Status Report on Creep Rupture Testing at ANL to Support the Development of Alloy 709 Code Case

This report provides an update on the status of the creep rupture testing on the first commercial heat of Alloy 709 in support of the Alloy 709 Code Case development. Creep tests were performed in air on the lever-arm load frames in the Mechanical and Environmental Testing Laboratory at Argonne National Laboratory (ANL). In FY21, the focus was on the age-hardened ESR-1150°C material. Twenty two tests were initiated, among which ten were completed. This report presents the data from the completed tests. Metallographic characterization of the fractured specimens were performed and the results are included. The creep data enabled the preliminary analysis of the creep behavior of this material. The characterization showed the effect of test temperature and stress on the deformation microstructure.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

CRCNS US-France Research Proposal: Collaborative Research: Encoding reward expectation in Drosophilia

The fruit fly Drosophila melanogaster has been a valuable model for investigating the genetic and neural bases that underlie learning and memory. Early and most current studies use basic behavior conditioning protocols to study learning in controlled laboratory settings. More recently, the ability to transgenically manipulate many of the brain neurons in the fruit fly with exquisite specificity, and the recent knowledge of the synaptic ‘connectome’ of the fruit fly brain, makes these animals almost unique as a comprehensive model for studies of learning, memory and motivated behavior. In fact, the connectome has revealed many types of new connections that had until now been overlooked. Within this context, the thesis of this proposal is that studies of learning and memory will be greatly enhanced by using more sophisticated means for evaluating memory representations, such as have been developed in vertebrates, and combining those studies with information from the connectome guided by computational modelling. We propose to push beyond the boundaries of existing conditioning protocols for fruit flies to investigate more complex memory representations. In particular, we will investigate the function of reinforcement pathways in relation to the absence of expected reinforcement. More specifically, we propose a series of experiments designed to investigate the memory representations in fruit flies when an expected consequence of a Conditioned Stimulus (CS) fails to occur. Although studies have evaluated how this failure can establish extinction memory for the CS, our studies will go beyond studying extinction. Specifically, we predict that in Drosophila when a CS is associated with a failed expectation of an appetitive food reinforcement it will acquire aversive value, and vice versa for a failed expectation of an aversive reinforcer. We combine these studies with manipulations of reinforcement pathways in the CNS inspired from the connectome, iteratively knitted in with established computational models. Intellectual Merit: The concept of reinforcement expectation and incentive contrast have been influential in the development of studies of associative learning in mammals. These questions are particularly challenging to answer in vertebrates because they require exquisite cellular, temporal, and genetic specificity of experimental manipulations. The recent development of work with identified neurons and their connectomes makes the larval and adult fly brains ripe as models for pushing our understanding of neural bases for these higher- order conditioning phenomena. Broader Impacts: Public health: These analyses and the conceptual framework of prediction error processing underlying them have a profound impact on our understanding of reinforcement-related behavior in humans, including monetary rewards and the mnemonic consequences of traumatic experiences, and for pathologies of the dopamine reinforcement system. Educational: This project will provide interdisciplinary training for postdoctoral researchers, Ph.D. and undergraduate students. The PIs will act as co-supervisors or mentors of students working in the different labs via face-to-face and internet-based technologies. We will also work with ASU’s award-winning Ask- A-Biologist program. This is an online science program designed to enrich the learning experiences of students of all ages and to provide classroom material for use by K-12 teachers. We will develop an extension of a game developed under a prior NSF award, and the new game will include modules to teach K-12 students about how insects learn. We will also integrate into the AAB site a program developed by a collaborator (B Gerber) at the Leibniz Institut für Neurobiologie, Magdeburg, and now in use in schools in Germany, to teach K-12 students how to train animals using the fruit fly larval learning paradigm. Underrepresented groups: All PIs will work with their university offices of Academic Diversity and Equal Opportunity for reaching underrepresented students.

59 BASIC BIOLOGICAL SCIENCES↗

Reinterpretations of the northern Nectaris Basin, part F

Photogeologic analysis was attempted on a strip of Apollo 16 metric photographs; the superior quality and stereographic properties of the photography permitted this reevaluation. Geologic contacts, as redrawn closely resemble those of earlier maps, but some differences resulted because of improved photographic quality and a conscious attempt to test fully the impact hypothesis. All or most of the nonmare material of the region of the northern Nectaris Basin rim can be explained by the formation of impact basins. This interpretation seems strained only for some irregular and clustered craters north of Mare Nectaris and for the southern facies of the Descartes material. If the latter material is shown to have been sampled and to be of impact origin, then extensive hill and crater-forming volcanic material of Imbrian or younger age probably does not exist on the lunar terra.

Wilhelms, D. E.↗

Preliminary analysis of cometary dust trails

Dust trails are observed in the orbits of some short-period comets. Large particles, having diameters in the submillimeter range and larger, are ejected by these comets into orbits close to that of the parent comet. By considering the effects of ejection and radiation forces, the spread of particles of different diameters along a parent comet's orbit, both ahead and behind the comet in mean anomaly were modeled. Using this model, the ages of the dust trail material associated with P/Tempel 2, P/Gunn, P/Encke, and P/Schwassmann-Wachmann 1 were estimated; they are found to consist of emissions occurring over a minimum of one to a few orbital periods. It also becomes possible to constrain the particle diameters in a trail segment forward of a comet's orbital position. Such a forward extension is observed in the Tempel 2 and Gunn dust trails, but not the Encke and S-W 1 dust trails. Relative particle sizes among these trails are discussed. The Tempel 2 dust trail is found to have an excess of particles with diameters greater than 1 mm.

Sykes, M. V.↗

Elevated temperature crack growth in advanced powder metallurgy aluminum alloys

Rapidly solidified Al-Fe-V-Si powder metallurgy alloy FVS0812 is among the most promising of the elevated temperature aluminum alloys developed in recent years. The ultra fine grain size and high volume fraction of thermally stable dispersoids enable the alloy to maintain tensile properties at elevated temperatures. In contrast, this alloy displays complex and potentially deleterious damage tolerant and time dependent fracture behavior that varies with temperature. J-Integral fracture mechanics were used to determine fracture toughness (K sub IC) and crack growth resistance (tearing modulus, T) of extruded FVS0812 as a function of temperature. The alloy exhibits high fracture properties at room temperature when tested in the LT orientation, due to extensive delamination of prior ribbon particle boundaries perpendicular to the crack front. Delamination results in a loss of through thickness constraint along the crack front, raising the critical stress intensity necessary for precrack initiation. The fracture toughness and tensile ductility of this alloy decrease with increasing temperature, with minima observed at 200 C. This behavior results from minima in the intrinsic toughness of the material, due to dynamic strain aging, and in the extent of prior particle boundary delaminations. At 200 C FVS0812 fails at K levels that are insufficient to cause through thickness delamination. As temperature increases beyond the minimum, strain aging is reduced and delamination returns. For the TL orientation, K (sub IC) decreased and T increased slightly with increasing temperature from 25 to 316 C. Fracture in the TL orientation is governed by prior particle boundary toughness; increased strain localization at these boundaries may result in lower toughness with increasing temperature. Preliminary results demonstrate a complex effect of loading rate on K (sub IC) and T at 175 C, and indicate that the combined effects of time dependent deformation, environment, and strain aging may play a role. Fractography showed that microvoid coalescence was the microscopic mode of fracture in FVS0812 under all testing conditions. However, the nature of the microvoids varied with test temperature and loading rate, and is complex for the fine grain and dipersoid sizes of FVS0812.

Porr, William C., Jr.↗

Structural geology and geological history of the Perrine and Nun Sulci Quadrangles (Jg-2 and Jg-5), Ganymede

Grooves are the dominant structural features on Ganymede. While single grooves are found in many areas, it is somewhat more common to find them grouped together in groove sets (groupings of grooves with common structural trends). It is generally believed that the grooves are extensional features. Their underlying geologic nature cannot be determined from Voyager images, however. It appears likely that they are grabens, but the images are insufficient to rule out the possibility that they are modified extension fractures or some kind of ductile necking features. The oldest materials within the Nun Sulci and Perrine quadrangles occur within the cratered dark materials unit, as is generally the case for all of Ganymede. This is the most widespread of the dark units mapped in these two quadrangles. Crater densities within cratered dark materials are consistent with an age on the order of several billion years, and thus cratered dark terrain probably represents crust that has survived from the end of the primordial intense bombardment phase of solar system history. The brief geologic history is greatly oversimplified as a result of the poor resolution and unfavorable viewing geometry of the images covering the area.

Mcgill, George E.↗

Degradation of Coflon in Methanol at Temperatures Around 140 C

An unexpected and significant physico-chemical degradation of Coflon PVDF specimens was observed at the end of 1994 during routine scheduled exposure exercises on strained material. The intent was to age various samples, including some strained in a 4-point bend configuration, in methanol at 140 C and subsequently submit the aged samples to various tests including dynamic fatigue and fracture toughness. However, the samples deteriorated to such an extent that such testing was not possible: only when conditions were made less severe was it found possible to perform such testing. The purpose of the current report is to describe the nature of the PVDF deterioration observed during a number of tests performed to examine this phenomenon. This report also records, as Appendix 1, some SEM/X-ray microanalysis data on Coflon samples exposed to a methanol/amine mixture, and to other amine or H2S-aged samples.

Campion, R. P.↗

Automatic Inspection of Aircraft Using Open-Architecture Robotic Platforms

Aging aircraft structures and composite materials are requiring rapid inspection of large areas. Removal from the aircraft for NDE at an inspection facility is not economical as compared to field inspection. Detection and characterization of defects are labor intensive, time consuming and when the process is manual the results are subjected to human error. These limitations of NDE created a need for portable, user friendly inspection systems that can rapidly scan large areas of complex structures and locate all the detrimental material conditions. Addressing this need has been an evolutionary process that followed the technology trend, and unique devices were developed to allow rapid field inspection. This development involves multi-disciplinary approaches to integrate NDE, telerobotics, neural networks, advanced materials science, imbedded computing and automated control. These efforts have led to the development of various portable inspection systems and the current trend is towards fully automatic systems that will operate autonomously.

Bar-Cohen, Yoseph↗

Autonomous Rapid Inspection of Aerospace Structures

Aging aircraft structures and composite materials are requiring rapid inspection of large areas. Removal from the aircraft for NDE at an inspection facility is not economical as compared to field inspection. Detection and characterization of defects are labor intensive, time consuming and when the process is manual the result are subjected to human error.

control inspection systems↗

Flexible Thermal Protection System Development for Hypersonic Inflatable Aerodynamic Decelerators

The Hypersonic Inflatable Aerodynamic Decelerators (HIAD) project has invested in development of multiple thermal protection system (TPS) candidates to be used in inflatable, high downmass, technology flight projects. Flexible TPS is one element of the HIAD project which is tasked with the research and development of the technology ranging from direct ground tests, modelling and simulation, characterization of TPS systems, manufacturing and handling, and standards and policy definition. The intent of flexible TPS is to enable large deployable aeroshell technologies, which increase the drag performance while significantly reducing the ballistic coefficient of high-mass entry vehicles. A HIAD requires a flexible TPS capable of surviving aerothermal loads, and durable enough to survive the rigors of construction, handling, high density packing, long duration exposure to extrinsic, in-situ environments, and deployment. This paper provides a comprehensive overview of key work being performed within the Flexible TPS element of the HIAD project. Included in this paper is an overview of, and results from, each Flexible TPS research and development activity, which includes ground testing, physics-based thermal modelling, age testing, margins policy, catalysis, materials characterization, and recent developments with new TPS materials.

DelCorso, Joseph A.↗

Radiation Damage In Reactor Cavity Concrete

License renewal up to 60 years and the possibility of subsequent license renewal to 80 years has established a renewed focus on long-term aging of nuclear generating stations materials, and recently, on concrete. Large irreplaceable sections of most nuclear generating stations include concrete. The Expanded Materials Degradation Analysis (EMDA), jointly performed by the Department of Energy, the Nuclear Regulatory Commission and Industry, identified the urgent need to develop a consistent knowledge base on irradiation effects in concrete. Much of the historical mechanical performance data of irradiated concrete does not accurately reflect typical radiation conditions in NPPs or conditions out to 60 or 80 years of radiation exposure. To address these potential gaps in the knowledge base, The Electric Power Research Institute and Oak Ridge National Laboratory are working to disposition radiation damage as a degradation mechanism. This paper outlines the research program within this pathway including: (i) defining the upper bound of the neutron and gamma dose levels expected in the biological shield concrete for extended operation (80 years of operation and beyond), (ii) determining the effects of neutron and gamma irradiation as well as extended time at temperature on concrete, (iii) evaluating opportunities to irradiate prototypical concrete under accelerated neutron and gamma dose levels to establish a conservative bound and share data obtained from different flux, temperature, and fluence levels, (iv) evaluating opportunities to harvest and test irradiated concrete from international NPPs, (v) developing cooperative test programs to improve confidence in the results from the various concretes and research reactors, (vi) furthering the understanding of the effects of radiation on concrete (see companion paper) and (vii) establishing an international collaborative research and information exchange effort to leverage capabilities and knowledge.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Evaluating the Impacts of Reactive Gas (Carbon Dioxide and Oxygen) Ingress on Leaching from Cementitious Waste Forms - 17482

Cementitious materials are currently being used as the waste forms for low-activity waste disposal (Saltstone) at the Savannah River Site. In addition, cementitious materials have been selected as the waste form (Cast Stone) for secondary wastes and are being investigated for use for supplemental low-activity waste treatment (Cast Stone) at the Hanford Site. These materials are subjected to numerous aging and degradation phenomena in the disposal environment that potentially impact their long-term durability and performance. One important phenomenon is the ingress of reactive gases (i.e., carbon dioxide and oxygen) that can react with and change the chemistry and pore structure and thus mass transport properties of the waste forms. The reaction of carbon dioxide (i.e., carbonation) reduces the pH of the waste form pore solution impacting the solubility of constituents of potential concern (COPCs). In Cast Stone and Saltstone, the reaction of oxygen (i.e., oxidation) impacts the solubility of redox-sensitive COPCs, notably the technetium-99 (Tc-99) and chromium. The objective of this research is to experimentally characterize the carbonation and oxidation impacts on chemistry and leaching behavior in cementitious waste forms using experimental techniques including United States Environmental Protection Agency (U.S. EPA) Method 1313 and U.S. EPA Method 1315. Results of experimental characterization will be used to parameterize reactive mass transport models to project leaching under a range of field scenarios in future applications. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

MQ NMR and SPME analysis of nonlinearity in the degradation of a filled silicone elastomer

Radiation induced degradation of polymeric materials occurs via numerous, simultaneous, competing chemical reactions. Though degradation is typically found to be linear in adsorbed dose, some silicone materials exhibit non-linear dose dependence due to dose dependent dominant degradation pathways. We have characterized the effects of radiative and thermal degradation on a model filled-PDMS system, Sylgard 184 (commonly used as an electronic encapsulant and in biomedical applications), using traditional mechanical testing, NMR spectroscopy, and sample headspace analysis using Solid Phase Micro-Extraction (SPME) followed by Gas Chromatography/Mass Spectrometry (GC/MS). The mechanical data and {sup 1}H spin-echo NMR indicated that radiation exposure leads to predominantly crosslinking over the cumulative dose range studies (0 to 250 kGray) with a rate roughly linear with dose. {sup 1}H Multiple Quantum NMR detected a bimodal distribution in the network structure, as expected by the proposed structure of Sylgard 184. The MQ-NMR further indicated that the radiation induced structural changes were not linear in adsorbed dose and competing chain scission mechanisms contribute more largely to the overall degradation process in the range of 50 -100 kGray (though crosslinking still dominates). The SPME-GC/MS data were analyzed using Principal Component Analysis (PCA), which identified subtle changes in the distributions of degradation products (the cyclic siloxanes and other components of the material) as a function of age that provide insight into the dominant degradation pathways at low and high adsorbed dose.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PETN Coarsening - Predictions from Accelerated Aging Data

Ensuring good ignition properties over long periods of time necessitates maintaining a good level of porosity in powders of initiator materials and preventing particle coarsening. To simulate porosity changes of such powder materials over long periods of time a common strategy is to perform accelerated aging experiments over shorter time spans at elevated temperatures. In this paper we examine historical accelerated-aging data on powders of Pentaerythritol Tetranitrate (PETN), an important energetic material, and make predictions for long-term aging under ambient conditions. Lastly, we develop an evaporation-condensation- based model to provide some mechanistic understanding of the coarsening process.

36 MATERIALS SCIENCE↗

Mineral detection of neutrinos and dark matter. A whitepaper

Minerals are solid state nuclear track detectors — nuclear recoils in a mineral leave latent damage to the crystal structure. Depending on the mineral and its temperature, the damage features are retained in the material from minutes (in low-melting point materials such as salts at a few hundred °C) to timescales much larger than the 4.5 Gyr-age of the Solar System (in refractory materials at room temperature). The damage features from the O (50) MeV fission fragments left by spontaneous fission of 238U and other heavy unstable isotopes have long been used for fission track dating of geological samples. Laboratory studies have demonstrated the readout of defects caused by nuclear recoils with energies as small as O (1) keV. This whitepaper discusses a wide range of possible applications of minerals as detectors for E R ≳ O (1) keV nuclear recoils: Using natural minerals, one could use the damage features accumulated over O (10) Myr–O (1) Gyr to measure astrophysical neutrino fluxes (from the Sun, supernovae, or cosmic rays interacting with the atmosphere) as well as search for Dark Matter. Using signals accumulated over months to few-years timescales in laboratory-manufactured minerals, one could measure reactor neutrinos or use them as Dark Matter detectors, potentially with directional sensitivity. Research groups in Europe, Asia, and America have started developing microscopy techniques to read out the O (1)–O (100) damage features in crystals left by O (0.1)–O (100) keV nuclear recoils. We report on the status and plans of these programs. Furthermore, the research program towards the realization of such detectors is highly interdisciplinary, combining geoscience, material science, applied and fundamental physics with techniques from quantum information and Artificial Intelligence.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗