Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrostaticity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Mechanical characterization and modeling of non-linear deformation and fracture of a fiber reinforced metal matrix composite

The nonlinear anisotropic mechanical behavior of an aluminum alloy metal matrix composite reinforced with continuous alumina fibers was determined experimentally. The mechanical behavior of the composite were modeled by assuming that the composite has a periodical microstructure. The resulting unit cell problem was solved with the finite element method. Excellent agreement was found between theoretically predicted and measured stress-strain responses for various tensile and shear loadings. The stress-strain responses for transverse and inplane shear were found to be identical and this will provide a simplification of the constitutive equations for the composite. The composite has a very low ductility in transverse tension and a limited ductility in transverse shear that was correlated to high hydrostatic stresses that develop in the matrix. The shape of the initial yield surface was calculated and good agreement was found between the calculated shape and the experimentally determined shape.

Jansson, S.↗
NASA NTRS1990

Development and mechanical properties of construction materials from lunar simulants

The development of construction materials such as concrete from lunar soils without the use of water requires a different methodology than that used for conventional terrestrial concrete. Currently, this research involves two aspects: (1) liquefaction of lunar simulants with various additives in a furnace so as to produce a construction material like an intermediate ceramic; and (2) cyclic loading of simulant with different initial vacuums and densities with respect to the theoretical maximum densities (TMD). In both cases, bending, triaxial compression, extension, and hydrostatic tests will be performed to define the stress-strain strength response of the resulting materials. In the case of the intermediate ceramic, bending and available multiaxial test devices will be used, while for the compacted case, tests will be performed directly in the new device. The tests will be performed by simulating in situ confining conditions. A preliminary review of high-purity metal is also conducted.

Desai, Chandra S.↗
NASA NTRS1991

Cardiovascular Adjustments to Gravitational Stress

The effects of gravity on the cardiovascular system must be taken into account whenever a hemodynamic assessment is made. All intravascular pressure have a gravity-dependent hydrostatic component. The interaction between the gravitational field, the position of the body, and the functional characteristics of the blood vessels determines the distribution of intravascular volume. In turn this distribution largely determines cardiac pump function. Multiple control mechanisms are activated to preserve optimal tissue perfusion when the magnitude of the gravitational field or its direction relative to the body changes. Humans are particularly sensitive to such changes because of the combination of their normally erect posture and the large body mass and blood volume below the level of the heart. Current aerospace technology also exposes human subjects to extreme variations in the gravitational forces that range from zero during space travel to as much an nine-times normal during operation of high-performance military aircraft. This chapter therefore emphasizes human physiology.

Blomqvist, C. Gunnar↗
NASA NTRS1991

Effects of atmospheric modeling errors on determinations of baseline vectors from very long baseline interferometry

An investigation is conducted in order to expose errors in the formula for the elevation angle dependence of the hydrostatic atmospheric propagation delay, called the mapping function. A series of special VLBI experiments that involve a large fraction of group delay data from very low elevation angles are performed. Twenty-two experiments, each 26 hours in duration, were performed using VLBI antennas at Goldstone, California and at Westford, Massachusetts. Elevation angle cutoff tests were used to examine the contribution of these errors to the estimates of the vertical coordinate of site position. This contribution is determined to be about 19 mm. It is also found that, for the spacing of 1-2 months between experiments, the mapping function errors do not exhibit a coherent annual signature, but appear to be random in the long term.

Davis, J. L.↗
NASA NTRS1991

A study of solar flare energy transport based on coordinated H-alpha and X-ray observations

The temporal evolution of the ratio between H-alpha to nonthermal hard X-ray emission was investigated using coordinated H-alpha and hard- and soft-X-ray observations of five solar flares (on May 7, June 23, June 24, and June 25, 1980 and on April 30, 1985). These observations were used to estimate the emitted flare energy flux F(H-alpha) in H-alpha, the flux of F(2O) energy deposited by nonthermal electrons with energies above 20 keV, and the pressure p(c) of soft X-ray-emitting plasma as functions of time during the impulsive phase of each flare. It was found that the F(H-alpha)/F(2O) ratio shows a power-law dependence on F(2O), with a slope that differs slightly from that predicted by the static thick-target model of solar transport. Results also indicate that the power-law dependence is modified by hydrostatic pressure effects.

Canfield, Richard C.↗
NASA NTRS1990

Zonal mean temperature, pressure, zonal wind and geopotential height as functions of latitude

The new zonal mean COSPAR International Reference Atmosphere (CIRA-86) of temperature, zonal wind, and geopotential/geometric height is presented. This data can be used as a function of altitude or pressure and has nearly pole-to-pole coverage (80 deg S - 80 deg N) extending from the ground to approximately 120 km. Data sources and methods of computation are described; in general, hydrostatic and thermal wind balance are maintained at all levels and latitudes. As shown by a series of cross sectional plots, the new CIRA accurately reproduces most of the characteristic features of the atmosphere such as the equatorial wind and the general structure of the tropopause, stratopause, and mesopause.

Fleming, Eric L.↗
NASA NTRS1990

Development of experimental facilities for processing metallic crystals in orbit

This paper discusses the evolution, current status, and planning for facilities to exploit the microgravity environment of earth orbit in applied metallic materials science. Space-Shuttle based facilities and some precursor flight programs are reviewed. Current facility development programs and planned Space Station furnace capabilities are described. The reduced gravity levels available in earth orbit allow the processing of metallic materials without the disturbing influence of gravitationally induced thermal convection, stratification due to density differences in sample components, or the effects of hydrostatic pressure.

Duncan, Bill J.↗
NASA NTRS1991

Gasdynamic modeling of the Venus magnetotail

A gasdynamic, convected magnetic field model of the solar wind interaction with Venus is used to model the steady state Venus magnetotail. The flow obstacle surface is approximated as a tangential discontinuity. An initial obstacle shape is defined by balancing a hydrostatic equilibrium approximation for the internal plasma pressure with an external flow pressure approximation. These approximations produce a cylindrical obstacle in the distant tail. A refined obstacle shape that attempts to balance this internal pressure with the calculated external flow pressure tapers inward toward the tail axis downstream of the terminator. The bulk plasma flow and magnetic field properties compare well with experimental observations. The model predicts central magnetotail oxygen plasma number densities of about 0.2/cu cm and temperatures on the order of 10 to the 6th K flowing tailward at speeds as low as 200 m/s.

Moore, K. R.↗
NASA NTRS1991

The chromospheres of late-type stars. I - Eridani as a test case of multiline modelling

A new model of the lower chromosphere of the dwarf K2 star Epsilon Eridani is derived by matching flux profiles of the Ca IR triplet lines 8498 and 8542 A H-alpha and H-beta lines and the Na D lines (all observed simultaneously at the AAT), and the Ca II K line. The coupled non-LTE equations of statistical equilibrium and radiative transfer are solved under the constraint of hydrostatic equilibrium using the Carlsson (1986) code. Within the framework of the model, the Na D lines are an important photospheric diagnostic, and the Ca IR triplet lines can be used to locate the temperature minimum. The computed H-alpha and H-beta depths are highly sensitive constraints on the transition zone gradients and base pressures allowing us to derive a pressure at the base of the transition zone of 0.9 dyn/cm.

Thatcher, John D.↗
NASA NTRS1991

Model atmospheres and X-ray spectra of bursting neutron stars

Model atmosphere equations are derived which correspond to plane-parallel nongray atmospheres of very hot neutron stars in hydrostatic and radiative equilibrium. The nonlinear transfer equation used implements an exact photon redistribution function which precisely traces even those scattering events having large photon-electron energy exchange. The numerical results thus obtained encompass tables of the surface fluxes for 20 model atmospheres whose T(eff) ranges from 6 to 30 million K. The spectra of high gravity models are virtually identical with the blackbody spectrum shifted toward higher energies, while models approaching the Eddington limit develop a large low-energy hump.

Madej, Jerzy↗
NASA NTRS1991

Luminosity limit for alpha-viscosity accretion disks

The existence of a luminosity limit for alpha-viscosity physically thin accretion disks around black holes is established, using a new formulation of the radiation equation bridging optically thick and thin regimes. For alpha close to unity, this limit can be lower than the Eddington limit. Physically, this limit is due to the combined effects of gas and radiation pressure which become too large to satisfy vertical hydrostatic balance at intermediate optical depths for sufficiently high luminosities. This effect was overlooked in previous treatments using only the optically thin or thick limits of the radiative equation.

Liang, Edison P.↗
NASA NTRS1991

Numerical models of giant planet formation with rotation

A 1D quasi-spherical approximation is presently used under the assumption of hydrostatic equilibrium to model giant-planet formation processes that encompass the accretion and transport of angular momentum for both radiative and convective zones. These calculations have been conducted up to masses comparable to those of Saturn. Angular momentum transport is strong, leading to strong concentration of angular momentum in the outer convective zones which develop envelope masses greater than 30 earth masses. When the models are allowed to contract near the calculation's end, the ratio of centrifugal force to gravity at the outer radius rises sufficiently to validate the quasi-spherical approximation.

Korycansky, D. G.↗
NASA NTRS1991

Radiative-hydrodynamical simulations of accretion disk coronae

An algorithm has been developed that will carry out detailed, two-dimensional, fully self-consistent radiative-hydrodynamical simulations of accretion disk coronae in X-ray-luminous compact sources. The calculation reported here, for an accreting neutron star radiating at 0.5 times the Eddington luminosity, reveals several striking features. (1) The corona is comprised of two main regions - an inner highly dynamic portion whose vertical structure varies cyclically on a dynamical time scale, and an outer, more stable zone in which the evaporated plasma rises to form a 'sheath' that gradually merges into a wind at large radii. (2) The coronal structure shows a density inversion that contrasts sharply with the Gaussian profiles of earlier hydrostatic models. (3) Interestingly, flow velocities as high as a few billion cm/s are not uncommon in portions of the corona. The relevance of this point to the large measured width of the emission features seen in low-mass X-ray binaries and the Galactic black hole candidates is discussed.

Melia, Fulvio↗
NASA NTRS1991

Numerical simulations of thermal instabilities in stratified gases. II - Exploration of the parameter space

The temporal evolution of density perturbations in an initially hydrostatic isothermal atmosphere consisting of an optically thin radiating compressible plasma is studied. Numerical techniques are used to describe the nonlinear evolution of the perturbations, and the relative equilibrium between dynamic and thermal instabilities as governed by three independent control parameters are examined, namely, the initial density contrast of the perturbation, the ratio of the local buoyancy oscillation period to the local radiative cooling time, and the ratio of the perturbation radius to the local scaleheight. Four orders of magnitude of initial density contrasts and ratios of buoyancy and cooling times, and one order of magnitude of the bubble dimensions are explored. Well-defined oscillations were found to occur in a limited parameter range, and thermal instability to occur even within secondary condensations deriving from the bubble fragmentation.

Reale, F.↗
NASA NTRS1991

Alfven wave trapping, network microflaring, and heating in solar coronal holes

Fresh evidence that much of the heating in coronal holes is provided by Alfven waves is presented. This evidence comes from examining the reflection of Alfven waves in an isothermal hydrostatic model coronal hole with an open magnetic field. Reflection occurs if the wavelength is as long as the order of the scale height of the Alfven velocity. For Alfven waves with periods of about 5 min, and for realistic density, magnetic field strength, and magnetic field spreading in the model, the waves are reflected back down within the model hole if the coronal temperature is only slightly less than 1.0 x 10 to the 6th K, but are not reflected and escape out the top of the model if the coronal temperature is only slightly greater than 1.0 x 10 to the 6th K. Because the spectrum of Alfven waves in real coronal holes is expected to peak around 5 min and the temperature is observed to be close to 1.0 x 10 to the 6th K, the sensitive temperature dependence of the trapping suggests that the temperature in coronal holes is regulated by heating by the trapped Alfven waves.

Moore, R. L.↗
NASA NTRS1992

Hybrid Hydrostatic/Transient Roller Bearing Assembly

Proposed bearing assembly for shaft of high-speed turbopump includes both hydrostatic and rolling-element bearings. Rolling-element bearing unloaded at high speed by centrifugal expansion of outer race and transient retainer.

Justak, John F.↗
NASA NTRS1991

Flow and fracture of ice and ice mixtures

Frozen volatiles make up an important volume fraction of the low density moons of the outer solar system. Understanding the tectonic history of the surfaces of these moons, as well as the evolution of their interiors, requires knowledge of the mechanical strength of these icy materials under the appropriate planetary conditions (temperature, hydrostatic pressure, strain rate). Ongoing lab research is being conducted to measure mechanical properties of several different ices under conditions that faithfully reproduce condition both at the moons' surfaces (generally low temperature, to about 100 K, and low pressures) and in the deep interiors (warmer temperatures, pressures to thousands of atmospheres). Recent progress is reported in two different phases of the work: rheology of ices in the NH3-H2O system at temperatures and strain rates lower than ever before explored, with application to the ammonia-rich moons of Saturn and Uranus; and the water ice I yields II phase transformation, which not only applies directly to process deep in the interiors of Ganymede and Callisto, but holds implications for deep terrestrial earthquakes as well.

Durham, W. B.↗
NASA NTRS1991

Effect of Eccentricity on the Static and Dynamic Performance of a Turbulent Hybrid Bearing

The effect of journal eccentricity on the static and dynamic performance of a water lubricated, 5-recess hybrid bearing is presented in detail. The hydrostatic bearing has been designed to operate at a high speed and with a large level of external pressurization. The operating conditions determine the flow in the bearing to be highly turbulent and strongly dominated by fluid inertia effects. The analysis covers the spectrum of journal center displacements directed towards the middle of a recess and towards the mid-land portion between two consecutive recesses. Predicted dynamic force coefficients are uniform for small to moderate eccentricities. For large journal center displacements, fluid cavitation and recess position determine large changes in the bearing dynamic performance. The effect of fluid inertia force coefficients on the threshold speed of instability and whirl ratio of a single mass flexible rotor is discussed.

Sanandres, Luis A.↗