SEARCH · Engineering Papers

Results for “hydrogen applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

All sources NASA NTRS DOE OSTI

NASA NTRS1995

Hydrogen Annealing Of Single-Crystal Superalloys

Annealing at temperature equal to or greater than 2,200 degrees F in atmosphere of hydrogen found to increase ability of single-crystal superalloys to resist oxidation when subsequently exposed to oxidizing atmospheres at temperatures almost as high. Supperalloys in question are principal constituents of hot-stage airfoils (blades) in aircraft and ground-based turbine engines; also used in other high-temperature applications like chemical-processing plants, coal-gasification plants, petrochemical refineries, and boilers. Hydrogen anneal provides resistance to oxidation without decreasing fatigue strength and without need for coating or reactive sulfur-gettering constituents. In comparison with coating, hydrogen annealing costs less. Benefits extend to stainless steels, nickel/chromium, and nickel-base alloys, subject to same scale-adhesion and oxidation-resistance considerations, except that scale is chromia instead of alumina.

Smialek, James L.↗

NASA NTRS1995

An investigation of the loss of ductility in hydrogen charged beta-Ti alloys

The high strength, low density, and good corrosion resistance of Ti-based alloys make them candidate materials for a number of applications in the aerospace industry. A major limitation in the use of these alloys in the advanced hypersonic flight vehicle program is their susceptibility to hydrogen embrittlement. This study focuses on the hydrogen sensitivity of TIMETAL 21S beta-Ti alloy. The material received was in the form of grip-ends of failed tensile test samples which had been exposed to different charging conditions (combinations of hydrogen pressure and temperature). The samples received, the charging conditions, and their fracture mode are discussed. It can be seen that the fracture behavior changes from ductile to brittle with increasing hydrogen content, but the transition in behavior occurs for a small increase in hydrogen concentration. The aim of this program was to assess the microstructural differences between the ductile and brittle alloys to ascertain the embrittlement mechanism. A range of tools which included x-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used.

Robertson, Ian M.↗

DOE OSTI2020

In Situ Dispersion of Palladium on TiO 2 During Reverse Water–Gas Shift Reaction: Formation of Atomically Dispersed Palladium

The application of single-atom catalysts (SACs) to high-temperature hydrogenation requires materials that thermodynamically favor metal atom isolation over cluster formation. Here, we show that Pd can be predominantly dispersed as isolated atoms onto TiO 2 during the reverse water-gas shift (rWGS) reaction at 400 °C. Achieving atomic dispersion requires an artificial increase of the absolute TiO 2 surface area by an order of magnitude and can be accomplished by physically mixing a precatalyst (Pd/TiO 2 ) with neat TiO 2 prior to the rWGS reaction. Furthermore, the in situ dispersion of Pd was reflected through a continuous increase of rWGS activity over 92 h and supported by kinetic analysis, infrared and X-ray absorption spectroscopies and scanning transmission electron microscopy. The thermodynamic stability of Pd under high-temperature rWGS conditions is associated with Pd-Ti coordination, which manifests upon O-vacancy formation and the artificial increase in TiO 2 surface area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Sulfidation and selenidation of nickel nanoparticles

Abstract Transition metal chalcogenide nanoparticles (NPs) are of interest for energy applications, including batteries, supercapacitors, and electrocatalysis. Many methods have been established for synthesizing Ni NPs, and conversion chemistry to form Ni oxide and phosphides from template Ni NPs is well‐understood. Sulfidation and selenidation of Ni NPs have been much less explored, however. We report a method for the conversion of Ni template NPs into sulfide and selenide product NPs using elemental sulfur, 1‐hexadecanthiol, thiourea, trioctylphosphine sulfide, elemental selenium, and selenourea. While maintaining mole ratios of 2 mmol sulfur/selenium precursor: mmol Ni, products with phases of Ni 3 S 2 , Ni 9 S 8 , NiS, NiSO 4 ·6H 2 O, Ni 3 S 4 , Ni 3 Se 2 , and NiSe have been obtained. The products have voids that form through the Kirkendall effect during interdiffusion. Trends relating the chemical properties of the precursors to the phases of the products have been identified. While some precursors contained phosphorus, there was no significant incorporation of phosphorus in any of the products. An increase of the NP size during sulfidation and selenidation is consistent with ripening. The application of Ni sulfide and selenide NPs as electrocatalysts for the hydrogen evolution reaction is also demonstrated.

Lynch, Brian B.↗

DOE OSTI2023

Microstructure and Elevated Temperature Flexure Testing of Tungsten Produced by Electron Beam Additive Manufacturing

Abstract Due to their superior high-temperature thermomechanical capabilities, sputter erosion durability, and excellent resistance to hydrogen isotopes, tungsten materials have garnered significant interest in fusion nuclear applications. However, low room-temperature ductility and complex machining strategies present significant challenges for traditional fabrication. Electron beam powder bed fusion (EB-PBF) shows promise in manufacturing pure tungsten via high thermal energy input, elevated build temperature, and a tightly controlled high-vacuum environment. This work explores the process, structure, and property relationship of pure tungsten fabricated by EB-PBF, where 99.8% relative density was achieved with reduced cracking by isolating the build substrate and optimizing the print parameter suite. Optical and electron imaging revealed that the microstructure contained equiaxed grains along the build direction, with subgrains present in all inspected grains. Flexural testing at ambient and elevated temperatures demonstrated high ductility at 900°C and flexural strength of 470 MPa at room temperature of additively manufactured tungsten.

Zhang, Haozhi↗

DOE OSTI2021

Stable Tetrasubstituted Quinone Redox Reservoir for Enhancing Decoupled Hydrogen and Oxygen Evolution

In this report, we discuss Redox reservoirs (RRs) that may be used to decouple the two half-reactions of water electrolysis, enabling the spatial and temporal separation of hydrogen and oxygen evolution. Organic RRs are appealing candidates for this application; however, their instability limits their utility. Here we show that a tetrathioether-substituted quinone, tetramercaptopropanesulfonate quinone (TMQ), exhibits significantly enhanced stability relative to anthraquinone-2,7-disulfonate, the most effective organic RR reported previously. The enhanced stability, confirmed by symmetric flow-battery experiments under relevant conditions, enables the stable electrochemical production of H 2 and O 2 in a continuous-flow electrolysis cell. The reduced RR, tetramercaptopropanesulfonate hydroquinone, is not susceptible to decomposition, whereas the oxidized state, TMQ, undergoes slow decomposition, evident only after sustained operation (>60 h). The analysis of the byproducts provides a basis for a decomposition mechanism, establishing a foundation for the design of new organic RRs with even better performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

From Fluid Flow to Coupled Processes in Fractured Rock: Recent Advances and New Frontiers

Abstract Quantitative predictions of natural and induced phenomena in fractured rock is one of the great challenges in the Earth and Energy Sciences with far‐reaching economic and environmental impacts. Fractures occupy a very small volume of a subsurface formation but often dominate fluid flow, solute transport and mechanical deformation behavior. They play a central role in CO 2 sequestration, nuclear waste disposal, hydrogen storage, geothermal energy production, nuclear nonproliferation, and hydrocarbon extraction. These applications require predictions of fracture‐dependent quantities of interest such as CO 2 leakage rate, hydrocarbon production, radionuclide plume migration, and seismicity; to be useful, these predictions must account for uncertainty inherent in subsurface systems. Here, we review recent advances in fractured rock research covering field‐ and laboratory‐scale experimentation, numerical simulations, and uncertainty quantification. We discuss how these have greatly improved the fundamental understanding of fractures and one's ability to predict flow and transport in fractured systems. Dedicated field sites provide quantitative measurements of fracture flow that can be used to identify dominant coupled processes and to validate models. Laboratory‐scale experiments fill critical knowledge gaps by providing direct observations and measurements of fracture geometry and flow under controlled conditions that cannot be obtained in the field. Physics‐based simulation of flow and transport provide a bridge in understanding between controlled simple laboratory experiments and the massively complex field‐scale fracture systems. Finally, we review the use of machine learning‐based emulators to rapidly investigate different fracture property scenarios and accelerate physics‐based models by orders of magnitude to enable uncertainty quantification and near real‐time analysis.

58 GEOSCIENCES↗

DOE OSTI2023

Characterization of Aquifer Poroelastic Response to Impulse and Oscillatory Well Pressure Using Distributed Acoustic Sensing

Abstract The storage of fluids in the subsurface is critical for a broad spectrum of applications including managed aquifer recharge, storage of liquefied carbon dioxide and hydrogen, geothermal heat extraction and exploitation of hydrocarbon. It is surprising then, that there has been relatively little measurement of the vertical distribution of poroelastic storage in geologic formations as compared with permeability. We present experiments in which fluid was injected into an important regional aquifer and the depth‐dependent strain response measured using fiber optic distributed acoustic sensing. The formation expansion and contraction in response to fluid injection were several 100 nanostrain. Strain, and the implied storage distribution, was highly localized in specific strata and demonstrated complex, hydromechanical behavior. This new window into fluid‐geomechanical coupling undermines some typically use models and observations currently in practice, but provides potential for complete representation and prediction of fluid storage in the subsurface.

58 GEOSCIENCES↗

DOE OSTI2022

Self-healing oxygen evolution catalysts

Abstract Electrochemical and photoelectrochemical water splitting offers a scalable approach to producing hydrogen from renewable sources for sustainable energy storage. Depending on the applications, oxygen evolution catalysts (OECs) may perform water splitting under a variety of conditions. However, low stability and/or activity present challenges to the design of OECs, prompting the design of self-healing OECs composed of earth-abundant first-row transition metal oxides. The concept of self-healing catalysis offers a new tool to be employed in the design of stable and functionally active OECs under operating conditions ranging from acidic to basic solutions and from a variety of water sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Luminescence from Poly-Si Films and its Application to Study Passivating-Contact Solar Cells

In recent years, polycrystalline silicon (poly-Si) based passivating-contact solar cells have received tremendous attention from the solar research community due to its excellent surface passivation and high carrier conductivity. However, the poly-Si films are not transparent to all wavelengths of the solar spectrum. There is often some parasitic absorption in these films. From a different standpoint, as they absorb some light, they can luminesce. This phenomenon provides us with unique opportunities to investigate optoelectronic properties of the films in a fast, contactless, and nondestructive manner. In this work, we report the luminescence phenomenon from poly-Si films used in passivating-contact solar cells. We then utilize this phenomenon to report a range of applications for solar cells including studies of carrier transport behaviors and hydrogenation inside the films.

14 SOLAR ENERGY↗

DOE OSTI2022

Aluminization Coatings and Glass Seals for High Temperature Systems - CRADA 536 (Final Report)

The objective of this project was to demonstrate the suitability of PNNL’s Reactive Air Aluminization (RAA) coatings (US Patent Numbers 10,577,694, 10,378,094, and 9,481,923) for use in high-temperature systems. In particular, PNNL and Utility Global undertook a collaborative effort to explore the applicability of these coatings in Utility Global’s high-temperature hydrogen reactors where they would be used to prepare the sealing surfaces of the reactor technology. Utility Global instructed PNNL regarding their needs relating to further development of glass seal technologies suitable for use in their systems. This effort entailed alkaline earth-based silicate glass development and characterization; evaluation and characterization of reliability and compatibility of the coatings with glass seals, working environments, and substrates; performance demonstrations of representative cells and intermediate cells sealed using the glass seals and/or coatings of interest; and incorporation of the aluminization coatings and glass seals into Utility Global reactors for testing.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Vacuum-baking provides many advantages for LiH

In vacuum applications, the thermal decomposition of LiOH corrosion on LiH causes undesirable hydrogen outgassing. The quantity of outgassing is dependent on the thermal stability of the corrosion layer, which depends on sample treatment. We have measured the decomposition of LiOH on as-polished LiH and on previously vacuum-baked LiH (i.e., Li 2 O-covered LiH) which both experienced moisture re-exposure.

36 MATERIALS SCIENCE↗

NASA NTRS1979

Method for decomposing observed line shapes resulting from multiple causes - Application to plasma charge-exchange-neutral spectra

A method is given for decomposing the widths of observed spectral lines resulting from unresolved line splitting, additive kinetic processes of different types, instrumental broadening (slit function), Doppler broadening, etc. all superimposed. The second moments are used as measures of the various widths involved. The method is not applicable if dispersion type (Lorentz) broadening occurs. Application is made to plasma charge-exchange-neutral spectra of hydrogen, deuterium, and helium.

Patch, R. W.↗

NASA NTRS1981

Traction drive for cryogenic boost pump

Two versions of a Nasvytis multiroller traction drive were tested in liquid oxygen for possible application as cryogenic boost pump speed reduction drives for advanced hydrogen-oxygen rocket engines. The roller drive, with a 10.8:1 reduction ratio, was successfully run at up to 70,000 rpm input speed and up to 14.9 kW (20 hp) input power level. Three drive assemblies were tested for a total of about three hours of which approximately one hour was at nominal full speed and full power conditions. Peak efficiency of 60 percent was determined. There was no evidence of slippage between rollers for any of the conditions tested. The ball drive, a version using balls instead of one row of rollers, and having a 3.25:1 reduction ratio, failed to perform satisfactorily.

Meyer, S.↗

NASA NTRS1983

Investigation of the feasibility of temperature profiling optical diagnostics in the SSME fuel pre-burner

Results of an analytical investigation to determine the feasibility of temperature profiling in the space shuttle main engine (SSME) fuel preburner are presented. In this application it is desirable to measure temperature in the preburner combustor with a remote, nonintrusive optical technique. Several techniques using laser excitation were examined with a consideration of the constraints imposed by optical access in the fuel preburner and the problems associated with operation near the functioning space shuttle engine. The potential performance of practical diagnostic systems based on spontaneous Raman backscattering, laser induced fluorescence, and coherent anti-Stokes Raman spectroscopy were compared analytically. A system using collection of spontaneous Raman backscattering excited by a remotely located 5 to 10 watt laser propagated to the SSME through a small diameter optical fiber was selected as the best approach. Difficulties normally associated with Raman scattering: weak signal strength and interference due to background radiation are not expected to be problematic due to the very high density in this application, and the low flame luminosity expected in the fuel rich hydrogen oxygen flame.

Shirley, J. A.↗

NASA NTRS1987

The NASA/USAF arcjet research and technology program

Direct current arcjets have the potential to provide specific impulses greater than 500 sec with storable propellants, and greater than 1000 sec with hydrogen. This level of performance can provide significant benefits for such applications as orbit transfer, station keeping, orbit change, and maneuvering. The simplicity of the arcjet system and its elements of commonality with state-of-the-art resistojet systems offer a relatively low risk transition to these enhanced levels of performance for low power (0.5 to 1.5 kW) station keeping applications. Arcjets at power levels of 10 to 30 kW are potentially applicable to orbit transfer missions. Furthermore, with the anticipated development of space nuclear power systems, arcjets at greater than 100 kW may become attractive. This paper describes the ongoing NASA/USAF program and describes major recent accomplishments.

Stone, James R.↗

NASA NTRS1987

The NASA/USAF arcjet research and technology program

Stone, James R.↗

NASA NTRS1995

Hydrogen/Oxygen Torch Ignitor

Reliable device used to ignite variety of fuels. Used as general-purpose ignitor in other applications, or as hydrogen/oxygen torch. Operation of device straight-forward. Hydrogen and oxygen flow through separate ports into combustion chamber in device, where they ignite by use of surface-gap spark plug. Hot gases flow from this combustion chamber, through injector tube, into larger combustion chamber containing fuel-oxidizer mixture to be ignited.

Repas, George A.↗