Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “glasses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Ab Initio Simulation of Medium-Range Ordering in Ionic Glass Electrolytes LiSiPON and LiNaSiPON

Ionic glasses can exhibit a unique combination of optical transparency, electronic resistivity, ionic conductivity, and mechanical ductility. The origin of the relatively high ionic conductivity and ductility is poorly understood. Recently, these ionic glasses were found to have medium-range ordering (MRO) similar to that of metallic glasses. This MRO significantly impacts the properties of metallic glasses and is also expected to significantly impact the properties of ionic glasses. Here, this work used ab initio molecular dynamics (AIMD) simulations to study the effect of ionic glass composition on the MRO. The AIMD models showed that the degree of MRO increased as the temperature of the LiSiPON ionic glass decreased. The modeling also showed that the MRO is suppressed when 50% of Li is substituted with Na. This work lays the foundation for using AIMD to identify clear structure–property relationships in ionic glasses, allowing their properties to be optimized.

Osetsky, Yuri N. [Oak Ridge National Laboratory (O↗

Structure of International Simple Glass and properties of passivating layer formed in circumneutral pH conditions

Knowing the structure of a material is necessary to understand its evolution under various influences; here, the alteration by water of a reference glass of nuclear interest, called International Simple Glass (ISG), is studied. The ISG atomic structure has not yet been thoroughly characterized. Short- and medium-range order in this six-oxide glass was investigated by molecular dynamics (MD) methods. Combining the simulated data with experimental observations acquired from both pristine and altered ISG provided new insight into the formation of surface layers and passivation of the underlying glass. In the tested conditions of 90 °C, silica-saturated solution, and pH 90°C 7, the passivating layer partly inherits the structure of the pristine glass network despite the release of mobile elements (Na, B, and some Ca), with a reorganization of the silicate network following B release. The layer appears to minimize its internal energy by relaxing strain accumulated during glass quenching. The resulting passivated glass shows a strong resistance to hydrolysis. The nanopores of this hydrated material, displaying a mean pore size of ~1 nm, are filled with various water species. Water speciation determination inside the nanopores is therefore an achievement for future water dynamic study in the passivated glass.

36 MATERIALS SCIENCE↗

Effect of decades of corrosion on the microstructure of altered glasses and their radiation stability

Understanding the microstructural evolution of glasses during their interaction with water and radiation is of fundamental importance in addressing the corrosion of nuclear waste forms under geological disposal conditions. Here we report the results of more than 21 years of corrosion of two borosilicate glasses showing the formation of mesoporous C–S–H gels in Ca-bearing glasses and a mainly microporous microstructure in Al-bearing glasses. These porous corroded glasses were then irradiated with heavy ions to simulate the effects of recoil nucleus damage and monitored in real time using transmission electron microscopy with in situ ion irradiation. The ballistic collisions remarkably healed the porous corroded glasses to a pore-free homogeneous microstructure. Besides providing new insights and predictions about how doped glasses and actual waste forms may evolve under corrosion and irradiation, the results highlight the non-universal nature of the existing corrosion models and the important role that the glass composition and radiation damage play in the evolution of the microstructure during corrosion.

36 MATERIALS SCIENCE↗

New oxyfluoride glass with high fluorine content and laser patterning of nonlinear optical BaAlBO{sub 3}F{sub 2} single crystal line

A new oxyfluoride glass of 50BaF{sub 2}-25Al{sub 2}O{sub 3}-25B{sub 2}O{sub 3} (mol. %) with a large fraction of fluorine, i.e., F/(F + O) = 0.4, was prepared using a conventional melt-quenching method in order to synthesize new glass-ceramics containing nonlinear optical oxyfluoride crystals. The refractive index at 632.8 nm and ultra-violet cutoff wavelength of the glass were 1.564 and {approx}200 nm, respectively. Eu{sup 3+} ions in the glass showed a high quantum yield of 88% in the photoluminescence spectrum in the visible region. BaAlBO{sub 3}F{sub 2} crystals (size: 50-100 nm) showing second harmonic generations were formed through the crystallization of the glass. Lines consisting of BaAlBO{sub 3}F{sub 2} crystals were patterned successfully on the glass surface by laser irradiations (Yb:YVO{sub 4} laser with a wavelength of 1080 nm, laser power of 1.1 W, scanning speed of 8 {mu}m/s). High resolution transmission electron microscope observations combined with a focused ion beam technique indicate that BaAlBO{sub 3}F{sub 2} crystals are highly oriented just like a single crystal. The present study proposes that the new oxyfluoride glass and glass-ceramics prepared have a high potential for optical device applications.

36 MATERIALS SCIENCE↗

Effect of Li{sub 2}SO{sub 4} addition on structure and ionic conductivity of lithium borosilicotitanate glasses

Lithium borosilicotitanate glasses containing Li{sub 2}SO{sub 4} were prepared by melt quenching technique. Electrical conductivity, density, molar volume and glass transition temperature T{sub g} for all the glass samples were measured. IR spectroscopy was used for structural studies of these glasses in the range from 400 to 2000 cm{sub −1}. The conductivity of the Li{sub 2}SO{sub 4} containing glasses was found to be half an order higher than the base glass. The electrical conductivity was interpreted from the point of view of glass structure which suggests that an enhancement in conductivity is due to the incorporation of Li{sub 2}SO{sub 4} in the macromolecular network. The molar volume and glass transition temperature T{sub g} results are found to be in good correlation with conductivity results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structures and physical properties of Na 2 O doped silicate glass

Ab initio molecular dynamics has been applied to construct seven sodium silicate glass models with Na2O concentration ranging from 0 to 50 mol. %. The structures of the simulated (Na 2 O) x (SiO 2 ) 1-x glasses are critically analyzed and validated by comparing with available experimental data. Because the initial seed model is based on a near-perfect continuous random network model for amorphous SiO 2 with periodic boundaries, the structures of these silicate glasses are highly reliable. The electronic structure, interatomic bonding, and the mechanical and optical properties of seven models are calculated using the first-principles density functional method. In particular, a single quantum mechanical metric, the total bond order density (TBOD), is used to characterize the internal cohesion of sodium silicate glass. This is a significant step beyond the traditional analysis of glasses based purely on the geometric parameters. The TBOD value is found to decrease with increasing Na content, indicating the destruction of silica network connectivity. The calculated mass density and refractive index increase with x are in good agreement with experiment. The elastic coefficients and bulk mechanical properties exhibit a nonlinear variation in the series and depend greatly on the internal bonding and cohesion of the glass. The calculated Poisson's ratio indicates that the glass becomes more ductile with the addition of Na 2 O. Our results indicate that sodium silicate glass tends to be unstable for x greater than 0.4 due to the total destruction of the SiO 2 network.

36 MATERIALS SCIENCE↗

Mesoscale Phase Field Modeling of Glass Strengthening Under Triaxial Compression

Recent hydraulic bomb and confined sleeve tests on transparent armor glass materials such as borosilicate glass and soda-lime glass showed that the glass strength was a function of confinement pressure. The measured stress-strain relation is not a straight line as most brittle materials behave under little or no confinement. Moreover, borosilicate glass exhibited a stronger compressive strength when compared to soda-lime glass, even though soda-lime has higher bulk and shear moduli as well as apparent yield strength. To better understand these experimental findings, a mesoscale phase field model is developed to simulate the nonlinear stress versus strain behaviors under confinement by considering heterogeneity formation under triaxial compression and the energy barrier of a micro shear banding event (referred to as pseudo-slip hereafter) in the amorphous glass. With calibrated modeling parameters, the simulation results demonstrate that the developed phase field model can quantitatively predict the pressure-dependent strength, and it can also explain the difference between the two types of glasses from the perspective of energy barrier associated with a pseudo-slip event.

Confined Borosilicate↗

A Discrete Element Model of Armor Glass Fragmentation and Comminution Failure Under Compression

Because of its exceptional compressive resistance and crystal-clear appearance, lightweight glass has been traditionally used in transparent armor applications. However, due to its brittle nature, glass fails differently from ductile materials in the sense that glass fragmentation occurs instantly ahead of the projectile tip upon penetration. The effective residual strength of the armor glass then inevitably relies on the damaged glass strength within such comminuted zones with confinement from the surrounding intact materials. Physical understanding of damaged glass strength therefore becomes highly critical to the further development of armor designs. In the present study, a discrete element based modeling framework has been developed to understand and predict the evolution of compressive damages and residual strength of armor glasses. With the characteristic fragmentation and comminution failures explicitly resolved, their influences on the mechanical degradation of the loaded glass materials have been evaluated. The effects of essential loading conditions and material properties have also been investigated.

36 MATERIALS SCIENCE↗

Looking through model medieval green glasses: From color to recipe

Abstract The colors of medieval stained glasses depend on their chemical composition. The redox interactions in glass between iron and copper and their influence on the color were investigated in two soda‐lime silicate model glasses. Both glasses have close iron and copper redox ratios and copper oxidizes iron when the iron content is smaller than the copper content. The redox speciation of iron and copper was determined using combining x‐ray and optical absorption spectroscopies in relation with the resulting color. The molar extinction coefficient of Cu 2+ was estimated from the combined analysis to be 32 mol/L/cm. The glass color change from green to blue‐green color is assigned to the decrease of the total iron content, confirming that ancient glassmakers could control the final color with the glass recipe. These results provide reference data for further spectroscopic investigations of medieval stained glasses. Comparison with ancient copper‐colored green glass compositions suggests that the higher ratio of copper to iron total contents was imposed by the more reducing melting conditions in medieval furnaces.

Hunault, Myrtille O. J. Y.↗

Derivation of the Structural Integrity of Residual (SIR) glass model for the enhancement of waste loading

A new model based on glass structure to allow for enhanced waste loading in nuclear waste glass while maintaining chemical durability is proposed. The model is derived by splitting the molar concentrations of the targeted starting glass composition into theoretical crystalline phases anticipated to be observed during devitrification and a residual glass. An empirically derived relationship based on maintaining the residual glass structure, determined from a calculated non-bridging oxygen content, was demonstrated to successfully screen glasses for acceptable durability. The proposed model can successfully identify durable glass compositions containing 20–35 wt% Al 2 O 3 , a concentration that would significantly increase the projected waste loading in glasses processed at the Hanford Tank Waste Treatment and Immobilization Plant.

36 MATERIALS SCIENCE↗

Vibrational spectroscopy analysis of silica and silicate glass networks

Vibrational spectroscopy has been widely used to investigate various structural aspects of the glass network, and there are a plethora of papers reporting subtle but consistent changes in infrared and Raman spectral features of glass upon alterations of glass compositions, thermal histories, mechanical stresses, or surface treatments. However, interpretations of such spectral features are still obscured due to the lack of well-established physical principles accurately describing vibrational modes of the non-crystalline glass network. Due to the non-equilibrium nature of the glass network, three-dimensionally connected without any long-range orders, vibrational spectral features of glass cannot be interpreted using the analogy with those of isolated molecular moieties or crystalline counterparts. Here, this feature article explains why such comparisons are outdated and describes the recent advances made from theoretical calculations of vibrational spectral features of amorphous networks or comparisons of computational results with experimental data. For the interpretation of vibrational spectral features of silica and silicate glasses, the following empirical relationships are suggested: (i) the intensity-weighted peak position of the Si-O-Si stretch mode negatively correlates with the weighted average of the Si-O bond length distribution, and (ii) the broad band of the Si-O-Si bending mode negatively correlates with the Si-O-Si bond angle distribution. Selected examples of vibrational spectroscopic imaging of surface defects are discussed to deliberate the implication of these findings in the structure-property relationship of silica and silicate glass materials. Unanswered questions and continuing research challenges are identified.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Viscous Glass Sealants for SOFC Applications

Two series of silicate glasses that contain gallium as the primary critical component have been identified and optimized for viscous sealing of solid oxide fuel cells operating from 650 to 850°C. Both series of glass sealants crystallize partially upon heat treatment and yield multiphase microstructures that allow viscous flow at temperatures as low as 650°C. A fully amorphous sealant was also developed by isolating, synthesizing and testing a silicate glass of the same composition as the remnant glassy phase in one of the two glass series. Of ~40 glasses tested for longer than 500 hours, a set of 5 glasses has been further tested for up to 1000h in air, wet hydrogen, and against both yttria-stabilized zirconia and aluminized stainless steel. In some cases the testing times reached 2000h. The reactivity testing has provided new insight into the effects of Y, Zr, and Al on bulk and surface crystallization in boro-gallio-silicate glasses, and demonstrated that at least 5 of the newly-developed glasses are viable viscous sealants.

30 DIRECT ENERGY CONVERSION↗

Integrated Disposal Facility FY 2012 Glass Testing Summary Report

PNNL is conducting work to provide the technical basis for estimating radionuclide release from the engineered portion of the disposal facility for Hanford immobilized low-activity waste (ILAW). Before the ILAW can be disposed, DOE must conduct a performance assessment (PA) for the Integrated Disposal Facility (IDF) that describes the long-term impacts of the disposal facility on public health and environmental resources. As part of the ILAW glass testing program, PNNL is implementing a strategy, consisting of experimentation and modeling, to provide the technical basis for estimating radionuclide release from the glass waste form in support of future IDF PAs. Key activities in FY12 include upgrading the STOMP/eSTOMP codes to do near-field modeling, geochemical modeling of PCT tests to determine the reaction network to be used in the STOMP codes, conducting PUF tests on selected glasses to simulate and accelerate glass weathering, developing a Monte Carlo simulation tool to predict the characteristics of the weathered glass reaction layer as a function of glass composition, and characterizing glasses and soil samples exhumed from an 8-year lysimeter test. The purpose of this report is to summarize the progress made in fiscal year (FY) 2012 and the first quarter of FY 2013 toward implementing the strategy with the goal of developing an understanding of the long-term corrosion behavior of LAW glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

FY2016 ILAW Glass Corrosion Testing with the Single-Pass Flow-Through Method

The inventory of immobilized low-activity waste (ILAW) produced at the Hanford Tank Waste Treatment and Immobilization Plant (WTP) will be disposed of at the near-surface, on-site Integrated Disposal Facility (IDF). When groundwater comes into contact with the waste form, the glass will corrode and radionuclides will be released into the near-field environment. Because the release of the radionuclides is dependent on the dissolution rate of the glass, it is important that the performance assessment (PA) model accounts for the dissolution rate of the glass as a function of various chemical conditions. To accomplish this, an IDF PA model based on Transition State Theory (TST) can be employed. The model is able to account for changes in temperature, exposed surface area, and pH of the contacting solution as well as the effect of silicon concentrations in solution, specifically the activity of orthosilicic acid (H4SiO4), whose concentration is directly linked to the glass dissolution rate. In addition, the IDF PA model accounts for the alkali-ion exchange process as sodium is leached from the glass and into solution. The effect of temperature, pH, H4SiO4 activity, and the rate of ion-exchange can be parameterized and implemented directly into the PA rate law model. The rate law parameters are derived from laboratory tests with the single-pass flow-through (SPFT) method. To date, rate law parameters have been determined for seven ILAW glass compositions, thus additional rate law parameters on a wider range of compositions will supplement the existing body of data for PA maintenance activities. The data provided in this report can be used by ILAW glass scientists to further the understanding of ILAW glass behavior, by IDF PA modelers to use the rate law parameters in PA modeling efforts, and by Department of Energy (DOE) contractors and decision makers as they assess the IDF PA program.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Stress Mapping in Glass-to-Metal Seals using Indentation Crack Lengths.

Predicting the residual stress which develops during fabrication of a glass-to-metal compression seal requires material models that can accurately predict the effects of processing on the sealing glass. Validation of the predictions requires measurements on representative test geometries to accurately capture the interaction between the seal materials during a processing cycle required to form the seal, which consists of a temperature excursion through the glass transition temperature of the sealing glass. To this end, a concentric seal test geometry, referred to as a short cylinder seal, consisting of a stainless steel shell enveloping a commercial sealing glass disk has been designed, fabricated, and characterized as a model validation test geometry. To obtain data to test/validate finite element (FE) stress model predictions of this geometry, spatially-resolved residual stress was calculated from the measured lengths of the cracks emanating from radially positioned Vickers indents in the glass disk portion of the seal. The indentation crack length method is described, and the spatially-resolved residual stress determined experimentally are compared to FE stress predictions made using a nonlinear viscoelastic material model adapted to inorganic sealing glasses and an updated rate dependent material model for 304L stainless steel. The measurement method is a first to achieve a degree of success for measuring spatially resolved residual stress in a glass-bearing geometry and a favorable comparison between measurements and simulation was observed.

36 MATERIALS SCIENCE↗

Stress Mapping in Glass-to-Metal Seals using Indentation Crack Lengths

Predicting the residual stress which develops during fabrication of a glass-to-metal compression seal requires material models that can accurately predict the effects of processing on the sealing glass. Validation of the predictions requires measurements on representative test geometries to accurately capture the interaction between the seal materials during a processing cycle required to form the seal, which consists of a temperature excursion through the glass transition temperature of the sealing glass. To this end, a concentric seal test geometry, referred to as a short cylinder seal, consisting of a stainless steel shell enveloping a commercial sealing glass disk has been designed, fabricated, and characterized as a model validation test geometry. To obtain data to test/validate finite element (FE) stress model predictions of this geometry, spatially-resolved residual stress was calculated from the measured lengths of the cracks emanating from radially positioned Vickers indents in the glass disk portion of the seal. The indentation crack length method is described, and the spatially-resolved residual stress determined experimentally are compared to FE stress predictions made using a nonlinear viscoelastic material model adapted to inorganic sealing glasses and an updated rate dependent material model for 304L stainless steel. The measurement method is a first to achieve a degree of success for measuring spatially resolved residual stress in a glass-bearing geometry and a favorable comparison between measurements and simulation was observed.

36 MATERIALS SCIENCE↗

Phase separation and crystallization of complex borosilicate melts for glass-ceramic waste forms

Waste loadings of reprocessed spent nuclear fuel vitrified into borosilicate glass can be increased by precipitating environmentally stable phases concentrated with waste components in a chemically stable glass matrix. The principal objective of this study was to characterize the development of crystalline powellite (CaMoO 4 and related phases) and oxyapatite (Ca 2 LN 8 Si 6 O 26 ) in borosilicate glass-ceramics and to determine how the formation of those phases affected its chemical durability. Borosilicate glasses provided by PNNL were re-melted and quenched at rates from over 300°C/s to ~0.05°C/s. Isothermal heat treatment experiments were conducted by quenching melts in a molten tin bath at various temperatures, holding for periods of time, and then quenching in a water bath. Analytical electron microscopy and x-ray diffraction provided information about the kinetics of the phase separation and crystallization processes responsible for microstructural development. Powellite and oxyapatite crystals formed during slower quench rates and longer isothermal times, and time-temperature-transformation (TTT) diagrams were developed from the latter experiments. A hot thermocouple test (HTT) system was built to rapidly quench melts and hold them at set times to provide supplementary TTT information, but that system was not as sensitive to the phase transformations as other tests. Corrosion tests were performed to understand how the individual phases in the glass-ceramic affect its overall chemical durability. Product consistency tests, performed at Missouri S&T and at Savannah River National Lab, provided release rates of major elements from samples as a function of cooling rate, and atomic force microscopy and profilometry measurements of surface topology determined the relative corrosion rates of the residual glass and oxyapatite phases. Faster dissolution rates were measured from samples cooled more slowly and these were explained by the greater fractions of B 2 O 3 in the residual glass phase after the formation of oxyapatite and powellite. Oxyapatite was found to be more durable than the residual glass.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Screening of Additional Candidate Low-Temperature Glasses for Technetium Recovered from Hanford Effluent Management Facility Evaporator Bottoms

In this annex to a previously reported study, a series of laboratory screening tests was conducted to identify low-temperature glasses that have significant potential for use in disposition of technetium from a Hanford Tank Waste Treatment & Immobilization Plant (WTP) secondary liquid waste stream. Specifically, a glass waste form is sought that would be suitable for on-site disposition of technetium, salts, and other species in a Tc-rich stream recovered by ion exchange from the future Effluent Management Facility (EMF) evaporator concentrate. In the current study, several additional candidate glasses were identified, and testing of previous candidates was extended to include the Toxicity Characteristic Leaching Procedure (TCLP). In non-radioactive testing with rhenium surrogate, new formulations incorporated a simulated ion exchange eluate at temperatures below 750 °C to produce an amorphous, or mixed crystalline-amorphous, product. Incorporation of technetium (NaTcO 4 )-containing simulated eluate was evaluated for two of these glasses. Technetium was not retained well in these glasses, confounding the previous conclusion that Tc volatilization during vitrification can be reduced by appropriate selection of low-temperature glasses. Preliminary data for additional low-temperature glass compositions and recommendations for future work are provided. This report is a deliverable associated with requisition 55068-004-03 NFE-17-0020 "Candidate Low-T Glass Waste Forms for EMF Bottoms On-Site Disposition Alternative."

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗