Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A soft departure from jamming: the compaction of deformable granular matter under high pressures

Here, the high-pressure compaction of three-dimensional granular packings is simulated using a bonded particle model (BPM) to capture linear elastic deformation. In the model, grains are represented by a collection of point particles connected by bonds. A simple multibody interaction is introduced to control Poisson's ratio and the arrangement of particles on the surface of a grain is varied to model both high- and low-frictional grains. At low pressures, the growth in packing fraction and coordination number follows the expected behavior near jamming and exhibit friction dependence. As the pressure increases, deviations from the low-pressure power-law scaling emerge after the packing fraction grows by approximately 0.1 and results from simulations with different friction coefficients converge. These results are compared to predictions from traditional discrete element method simulations which, depending on the definition of packing fraction and coordination number, may only differ by a factor of two. As grains deform under compaction, the average volumetric strain and asphericity, a measure of the change in the shape of grains, are found to grow as power laws and depend heavily on the Poisson's ratio of the constituent solid. Larger Poisson's ratios are associated with less volumetric strain and more asphericity and the apparent power-law exponent of the asphericity may vary. The elastic properties of the packed grains are also calculated as a function of packing fraction. In particular, we find the Poisson's ratio near jamming is 1/2 but decreases to around 1/4 before rising again as systems densify.

36 MATERIALS SCIENCE↗

Twin density and twin thickness evolution in sputtered Al–Mg alloys

Twinned Al–Mg alloys have been reported. However, the role of Mg solute in facilitating the formation of growth twins remains unclear. By using a precession-assisted crystal orientation mapping technique (PACOM) coupled with transmission electron microscopy (known as ASTAR), we examined the evolution of twin boundaries in Al, Al–1Mg, and Al–2.2Mg (at. %) films. The twinned grain fraction elevates with increasing film thickness until it reaches a peak when the film thickness is 120–160 nm. The Al–Mg alloys exhibited greater twinned grain fractions than pure Al. To investigate the fluctuation of twinned grain fraction, two types of twin boundaries were classified including intergranular and intragranular twins. The initial increase in twin density is attributed to the impingement of twinned grains during island coalescence and the twinned grains are more likely to survive during the grain growth process. Whereas the decrease in twinned grain fraction in thicker films is related to the removal of intragranular twins, and a lack of formation mechanisms of new twins.

Physics↗

Polarization-dependent electrocaloric and pyroelectric effects in ferroelectric BaTiO 3 thin films

In this paper we examine the influence of controllable polarization reversal and built-in electric fields on pyroelectric and electrocaloric effects in a BaTiO 3 thin film using a modified indirect method. We find that the magnitude of the sample's change in polarization with temperature is sensitive to the degree of polarization reversal. The pyroelectric response is small at low fractions of switched polarization and grows larger by several factors as larger fractions of polarization are reversed. This polarization reversal-sensitive pyroelectric behavior is the result of an internal built-in field, which has the effect of destabilizing low fractions of switched polarization and producing diminished pyroelectric effect. Greater fractions of switched polarization are more stable against backswitching and permit a larger pyroelectric response. Our findings highlight a characterization method for polarization-dependent pyroelectric effects in ferroelectric thin films, where built-in field effects are also present.

36 MATERIALS SCIENCE↗

Electrostatically driven pattern formation in mixed charged–neutral multicomponent elastic membranes

Multicomponent crystalline and amorphous elastic shells exhibit heterogeneous surface patterns that provide distinctive functionalities in cellular environments. Such patterning typically arises from the competition between short-range attractive and long-range repulsive interactions in membranes. Here, we demonstrate that the intrinsic competition between electrostatic repulsion and elastic deformation is sufficient to drive spontaneous surface patterning in elastic shells, requiring no additional attractive interactions. Using numerical simulations, we demonstrate pattern formation in mechanically homogeneous membranes with heterogeneous surface charge composition across different topologies, including spheres, discs, and flat periodic membranes. We also examine patterns in crystalline and amorphous shells of coassembled charged and neutral components with different bending rigidities. At low charge fraction, discrete charged surface domains form. At intermediate charge fraction, the competition between electrostatics and elasticity leads to elongated domains (rods) of the charged component, which results in lamellar patterns at nearly equal fraction of the charged and neutral components. At high charge fraction, nanodomains of the neutral component form. Amorphous shells exhibit similar progressions but with disordered structures rather than ordered lamellar patterns. These pattern morphologies are observed in both the closed shells and flat membranes. As salt concentration increases, all patterns coarsen due to the screening of electrostatic interactions.

charge heterogeneity↗

Incorporation of Ti in epitaxial Fe2TiO4 thin films

The titanomagnetites (Fe2-xTixO4, x = 1) are a family of reducible spinel-structure oxides of interest for their favorable magnetic, catalytic, and electrical transport properties. To understand the stability of the system during low temperature deposition, epitaxial thin films of Fe2TiO4 were deposited by molecular beam epitaxy on MgO(001) at 250 – 375°C. The homogeneous incorporation of Ti, Fe valence, and film morphology were all found to be strongly dependent on the oxidation conditions at the low substrate temperatures employed. More oxidizing conditions led to phase separation into epitaxial, faceted Fe3O4 and rutile TiO2. Less oxidizing conditions resulted in polycrystalline films that exhibited Ti segregation to the film surface, as well as mixed Fe valence (Fe3+, Fe2+, Fe0). A narrow window of intermediate oxygen partial pressure during deposition yielded nearly homogeneous Ti incorporation and a large fraction of Fe2+. However, these films were poorly crystallized, and no occupation of tetrahedral sites in the spinel lattice by Fe2+ was detected by x-ray magnetic circular dichroism at the Fe L-edge. After vacuum annealing, a small fraction of Fe2+ was found to occupy tetrahedral sites. Comparison of these results with previous work suggests that the restriction of the deposition conditions to low temperature by the MgO substrate limits the incorporation of Ti into the spinel lattice. This work suggests a path towards obtaining stoichiometric, well-crystallized Fe2TiO4 by MBE by utilizing high substrate temperature and low oxygen partial pressure during deposition on temperature-stable substrates.

Kaspar, Tiffany C.↗

Characterization and controllability of radiated power via extrinsic impurity seeding in strongly negative triangularity plasmas in DIII-D

Experiments with extrinsic impurity seeding in strongly negative triangularity shapes in DIII-D achieved radiated power fractions (relative to input power) of up to ≈85% total radiation and ≈55% core radiation in steady-operating conditions. The relationship between core and total radiation was sensitive to impurity species and input power. Attempts to reach higher radiation levels via higher impurity flows resulted in radiative collapse disruptions. Nitrogen, neon, argon, and krypton were tested. Injection was by gas puffing, usually controlled by feeding back real-time estimates for core or total radiating fractions ($P_\textrm{rad} / P_\textrm{input}$). Argon and krypton were controlled by feeding back total radiating fraction, whereas neon was controlled by feeding back the core radiating fraction, due to the lower efficiency of neon as a divertor radiator. Nitrogen flows were pre-programmed. Reasonable total $P_\textrm{rad}$ control target following was achieved with argon or krypton. Control was more challenging with the neon/core radiation configuration, which was more prone to slow response and overshooting of the control target. Poor particle removal contributed to the control challenge: neon particle inventory within the last closed flux surface was roughly constant for up to 1 s (the longest duration tested) after neon injection was halted. However, separate experiments with laser-blow off of non-recycling impurities measured a short impurity confinement time, on the scale of the energy confinement time of ∼100 ms. Modeling with the Aurora impurity transport simulation matched experimental neon density profiles with full recycling (R = 1.0) and weak pumping but predicted rapid decreases in neon inventory if pumping were increased or recycling decreased. This indicates that changes outside the confined plasma (adding a well-placed pump) would improve controllability for all highly recycling species.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Achievement of highly radiating plasma in negative triangularity and effect of reactor-relevant seeded impurities on confinement and transport

The first achievement of highly radiating plasmas in negative triangularity (NT) is shown with an operational space featuring high core radiation at high Greenwald fraction obtained with the injection of reactor-relevant seeded gases. These NT shape diverted discharges reach high values of normalized plasma pressure ( β N > 2) at high radiation fraction with no edge localized modes (ELMs) and a simultaneous reduction of the divertor heat flux. Here, we demonstrate that as long as the impurity level in the core is kept low to avoid excessive fuel dilution and impurity accumulation, integration of NT configuration with high radiation fraction not only is achievable but it can lead to confinement improvement with stabilization effects originating from collisionality, E × B shear and profiles changes due to impurity radiation cooling. The underlying physics mechanism is robust and reproducible and holds for a variety of impurity species. The absence of the requirement to stay in H-mode translates in a higher core radiation fraction potentially allowed in NT shape effectively mitigating the power exhaust issue. The results presented here demonstrate a path to high performance, ELM free and highly radiative regime with reactor-relevant seeding gases making this regime a potential new scenario for reactor design.

confinement improvement↗

Test of lepton flavor universality in B ± → K ± μ + μ – and B ± → K ± e + e – decays in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A test of lepton flavor universality in B ± → K ± μ + μ – and B ± → K ± e + e – decays, as well as a measurement of differential and integrated branching fractions of a nonresonant B ± → K ± μ + μ – decay are presented. The analysis is made possible by a dedicated data set of proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded in 2018, by the CMS experiment at the LHC, using a special high-rate data stream designed for collecting about 10 billion unbiased b hadron decays. The ratio of the branching fractions B(B ± → K ± μ + μ – ) to B(B ± → K ± e + e – ) is determined from the measured double ratio R(K) of these decays to the respective branching fractions of the B ± → J/ψK ± with J/ψ → μ + μ – and e + e – decays, which allow for significant cancellation of systematic uncertainties. The ratio R(K) is measured in the range 1.1 < q 2 < 6.0 GeV 2 , where q is the invariant mass of the lepton pair, and is found to be R(K) = 0.78$^{+0.47}_{-0.23}$, in agreement with the standard model expectation R(K) ≈ 1. This measurement is limited by the statistical precision of the electron channel. The integrated branching fraction in the same q 2 range, B(B ± → K ± μ + μ – ) = (12.42 ± 0.68) x 10 -8 , is consistent with the present world-average value and has a comparable precision.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Disruption thermal load mitigation with shattered pellet injection on the Joint European Torus (JET)

Disruption mitigation remains a critical, unresolved challenge for ITER. To aid in addressing this challenge, a shattered pellet injection (SPI) system was installed on JET and experiments conducted at a range of thermal energy fractions and stored energies in excess of 7 MJ. The primary goals of these experiments were to investigate the efficacy of the SPI on JET and the ability of the plasma to assimilate multiple pellets. Single pellet injections produced a saturation in total radiated energy (Wrad) with increasing injected neon content, suggesting total radiation of stored thermal energy. Further increases in injected neon quantities resulted in reduced cooling times and current quench (CQ) durations, indicating higher impurity assimilation. No significant variation in CQ duration or W rad was observed when varying the deuterium content at fixed neon quantities. Additionally, higher assimilation, inferred by shorter CQ durations, was measured when a mechanical punch was used to launch the pellets and this was attributed to a lower pellet velocity leading to higher solid content in the pellet plume and larger fragments penetrating deeper into the plasma. Radiation asymmetries averaged over the cooling time were inferred from Emis3D and ranged from 1.6 to 1.9. Asymmetries averaged over the entire disruption sequence were found to increase at higher thermal energy fractions. The radiated energy fractions decreased with increasing thermal energy fractions but this trend was eliminated when toroidal asymmetries were accounted for with Emis3D. Pure deuterium pellets were able to produce cooling times of up to 75 ms with a gradual loss in thermal stored energy of up to 80%. Experiments with multiple pellet injection indicated W rad can be increased through pellet superposition and density can be increased with an additional D2 injection without a reduction in W rad . KPRAD modelling accurately reproduced the cooling times and the CQ duration at high thermal energies. Assimilation estimates from KPRAD indicated CQ rates scale strongly whilst W rad scales weakly and saturates with assimilated neon content. Comparable W rad can be achieved with lower assimilated neon quantities as longer cooling times are attained. Thus reduced neon content can be preferential in a thermal load mitigation scheme as it may reduce radiation asymmetries and prevent flash melting.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simultaneous enhancement of tritium burn efficiency and fusion power with low-tritium spin-polarized fuel

This study demonstrates that using spin-polarized deuterium-tritium (D-T) fuel with more deuterium than tritium can increase tritium burn efficiency (TBE) by at least an order of magnitude without compromising fusion power output, compared to unpolarized fuel. Although previous studies show that a low tritium fraction can enhance TBE, this strategy resulted in reduced fusion power density. The surprising improvement in TBE at fixed power reported here is due to the TBE increasing nonlinearly with decreasing tritium fraction but the fusion power density increasing roughly linearly with D-T cross section. A study is performed for an ARC-like tokamak producing 481 MW of fusion power with unpolarized 53:47 D-T fuel, finding the minimum startup tritium inventory (I startup,min ) is 0.69 kg. By spin-polarizing half of the fuel and using a 60:40 D-T mix, I startup,min is reduced to 0.08 kg, and fully spin-polarizing the fuel with a 63:37 D-T mix further reduces I startup,min to 0.03 kg. Some ARC-like scenarios are predicted to achieve plasma ignition with relatively modest spin polarization. These findings indicate that, with advancements in helium divertor pumping efficiency, TBE values of approximately 10%–40% could be achieved using low-tritium-fraction and spin-polarized fuel with minimal power loss. This would dramatically lower tritium startup inventory requirements and reduce the amount of on-site tritium. More generally than just for spin-polarized fuels, increased plasma performance can be used to increase TBE. This strongly motivates the development of spin-polarized fuels and low-tritium-fraction operation for burning plasmas.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The landscape of disc outflows from black hole–neutron star mergers

ABSTRACT We investigate mass ejection from accretion discs formed in mergers of black holes (BHs) and neutron stars (NSs). The third observing run of the LIGO/Virgo interferometers provided BH–NS candidate events that yielded no electromagnetic (EM) counterparts. The broad range of disc configurations expected from BH–NS mergers motivates a thorough exploration of parameter space to improve EM signal predictions. Here we conduct 27 high-resolution, axisymmetric, long-term hydrodynamic simulations of the viscous evolution of BH accretion discs that include neutrino emission/absorption effects and post-processing with a nuclear reaction network. In the absence of magnetic fields, these simulations provide a lower limit to the fraction of the initial disc mass ejected. We find a nearly linear inverse dependence of this fraction on disc compactness (BH mass over initial disc radius). The dependence is related to the fraction of the disc mass accreted before the ouflow is launched, which depends on the disc position relative to the innermost stable circular orbit. We also characterize a trend of decreasing ejected fraction and decreasing lanthanide/actinide content with increasing disc mass at fixed BH mass. This trend results from a longer time to reach weak freezout and an increasingly dominant role of neutrino absorption at higher disc masses. We estimate the radioactive luminosity from the disc outflow alone available to power kilonovae over the range of configurations studied, finding a spread of two orders of magnitude. For most of the BH–NS parameter space, the disc outflow contribution is well below the kilonova mass upper limits for GW190814.

79 ASTRONOMY AND ASTROPHYSICS↗

The consequences of gamma-ray burst jet opening angle evolution on the inferred star formation rate

ABSTRACT Gamma-ray burst (GRB) data suggest that the jets from GRBs in the high redshift universe are more narrowly collimated than those at lower redshifts. This implies that we detect relatively fewer long GRB progenitor systems (i.e. massive stars) at high redshifts, because a greater fraction of GRBs have their jets pointed away from us. As a result, estimates of the star formation rate (SFR; from the GRB rate) at high redshifts may be diminished if this effect is not taken into account. In this paper, we estimate the SFR using the observed GRB rate, accounting for an evolving jet opening angle. We find that the SFR in the early universe (z > 3) can be up to an order of magnitude higher than the canonical estimates, depending on the severity of beaming angle evolution and the fraction of stars that make long GRBs. Additionally, we find an excess in the SFR at low redshifts, although this lessens when accounting for evolution of the beaming angle. Finally, under the assumption that GRBs do, in fact, trace canonical forms of the cosmic SFR, we constrain the resulting fraction of stars that must produce GRBs, again accounting for jet beaming-angle evolution. We find this assumption suggests a high fraction of stars in the early universe producing GRBs – a result that may, in fact, support our initial assertion that GRBs do not trace canonical estimates of the SFR.

79 ASTRONOMY AND ASTROPHYSICS↗

Model-independent discovery prospects for primordial black holes at LIGO

ABSTRACT Primordial black holes may encode the conditions of the early Universe, and may even constitute a significant fraction of cosmological dark matter. Their existence has yet to be established. However, black holes with masses below ${\sim}{1}{\, \mathrm{M}_\odot }$ cannot form as an endpoint of stellar evolution, so the detection of even one such object would be a smoking gun for new physics, and would constitute evidence that at least a fraction of the dark matter consists of primordial black holes. Gravitational wave detectors are capable of making a definitive discovery of this kind by detecting mergers of light black holes. But since the merger rate depends strongly on the shape of the black hole mass function, it is difficult to determine the potential for discovery or constraint as a function of the overall abundance of black holes. Here, we directly maximize and minimize the merger rate to connect observational results to the actual abundance of observable objects. We show that LIGO can discover mergers of light primordial black holes within the next decade even if such black holes constitute only a very small fraction of dark matter. A single merger event involving such an object would (i) provide conclusive evidence of new physics, (ii) establish the nature of some fraction of dark matter, and (iii) probe cosmological history at scales far beyond those observable today.

79 ASTRONOMY AND ASTROPHYSICS↗

Ionizing radiation from AGNs at z > 3.3 with the Subaru Hyper Suprime-Cam Survey and the CFHT Large Area U-band Deep Survey (CLAUDS)

ABSTRACT We use deep and wide imaging data from the CFHT Large Area U-band Deep Survey (CLAUDS) and the Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP) to constrain the ionizing radiation (Lyman Continuum, LyC) escape fraction from active galactic nuclei (AGNs) at z ∼ 3–4. For 94 AGNs with spectroscopic redshifts at 3.3 < z < 4.0, we use their U/i-band flux ratios to estimate LyC transmission of individual AGNs. The distribution of their LyC transmission shows values lower than the range of LyC transmission values for IGM of the same redshift range, which suggests that LyC escape fraction of AGNs at z > 3.3 is considerably lower than unity in most cases. We do not find any trend in LyC transmission values depending on their UV luminosities. Based on the photometry of stacked images we find the average flux ratio of LyC and non-ionizing UV photons escaping from the objects (fLyC/fUV)out = 0.182 ± 0.043 for AGNs at 3.3 < z < 3.6, which corresponds to LyC escape fraction fesc = 0.303 ± 0.072 if we assume a fiducial intrinsic SED of AGN. Based on the estimated LyC escape fraction and the UV luminosity function (UVLF) of AGNs, we argue that UV-selected AGNs’ contribution to the LyC emissivity at the epoch is minor, although the size of their contribution largely depends on the shape of the UVLF.

79 ASTRONOMY AND ASTROPHYSICS↗

SDSS-IV MaNGA: global properties of kinematically misaligned galaxies

ABSTRACT We select 456 gas–star kinematically misaligned galaxies from the internal Product Launch-10 of MaNGA survey, including 74 star-forming (SF), 136 green-valley (GV), and 206 quiescent (QS) galaxies. We find that the distributions of difference between gas and star position angles for galaxies have three local peaks at ∼0°, 90°, and 180°. The fraction of misaligned galaxies peaks at log (M*/M⊙) ∼ 10.5 and declines to both low- and high-mass end. This fraction decreases monotonically with increasing star formation rate and specific star formation rate. We compare the global parameters including gas kinematic asymmetry Vasym, H i detection rate and mass fraction of molecular gas, effective radius Re, Sérsic index n as well as spin parameter $\lambda _{R_e}$ between misaligned galaxies and their control samples. We find that the misaligned galaxies have lower H i detection rate and molecular gas mass fraction, smaller size, higher Sérsic index, and lower spin parameters than their control samples. The SF and GV misaligned galaxies are more asymmetric in gas velocity fields than their controls. These pieces of observational evidence point to the gas accretion scenario followed by angular momentum redistribution from gas–gas collision, leading to gas inflow and central star formation for the SF and GV misaligned galaxies. We propose three possible origins of the misaligned QS galaxies: (1) external gas accretion, (2) merger, and (3) GV misaligned galaxies evolve into QS galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Secular outflows from 3D MHD hypermassive neutron star accretion disc systems

Magnetized hypermassive neutron stars (HMNSs) have been proposed as a way for neutron star mergers to produce high electron fraction, high-velocity ejecta, as required by kilonova models to explain the observed light curve of GW170817. The HMNS drives outflows through neutrino energy deposition and mechanical oscillations, and raises the electron fraction of outflows through neutrino interactions before collapsing to a black hole (BH). Here, in this study, we perform 3D numerical simulations of HMNS–torus systems in ideal magnetohydrodynamics, using a leakage/absorption scheme for neutrino transport, the nuclear APR equation of state, and Newtonian self-gravity, with a pseudo-Newtonian potential added after BH formation. Due to the uncertainty in the HMNS collapse time, we choose two different parametrized times to induce collapse. We also explore two initial magnetic field geometries in the torus, and evolve the systems until the outflows diminish significantly ($\sim\!\! 1\!\! - \!\!2\ \mathrm{s}$). We find bluer, faster outflows as compared to equivalent BH–torus systems, producing M ∼ 10 −3 M ⊙ of ejecta with Y e ≥ 0.25 and v ≥ 0.25c by the simulation end. Approximately half the outflows are launched in disc winds at times $t\lesssim 500 \ \mathrm{ms}$, with a broad distribution of electron fractions and velocities, depending on the initial condition. The remaining outflows are thermally driven, characterized by lower velocities and electron fractions. Nucleosynthesis with tracer particles shows patterns resembling solar abundances in all models. Although outflows from our simulations do not match those inferred from two-component modelling of the GW170817 kilonova, self-consistent multidimensional detailed kilonova models are required to determine whether our outflows can power the blue kilonova.

79 ASTRONOMY AND ASTROPHYSICS↗

IGM damping wing constraints on the tail end of reionization from the enlarged XQR-30 sample

ABSTRACT The attenuation of Lyα photons by neutral hydrogen in the intergalactic medium (IGM) at z ≳ 5 continues to be a powerful probe for studying the epoch of reionization. Given a framework to estimate the intrinsic (true) Lyα emission of high-z sources, one can infer the ionization state of the IGM during reionization. In this work, we use the enlarged XQR-30 sample of 42 high-resolution and high signal-to-noise quasar spectra between $5.8\lesssim \, z\lesssim \, 6.6$ obtained with VLT/X-shooter to place constraints on the IGM neutral fraction. This is achieved using our existing Bayesian QSO reconstruction framework which accounts for uncertainties such as the: (i) posterior distribution of predicted intrinsic Lyα emission profiles (obtained via covariance matrix reconstruction of the Lyα and N v emission lines from unattenuated high-ionization emission line profiles; C iv, Si iv + O iv], and C iii]) and (ii) distribution of ionized regions within the IGM using synthetic damping wing profiles drawn from a 1.63 Gpc3 reionization simulation. Following careful quality control, we used 23 of the 42 available QSOs to obtain constraints/limits on the IGM neutral fraction during the tail-end of reionization. Our median and 68th percentile constraints on the IGM neutral fraction are: $0.20\substack{+0.14 -0.12}$ and $0.29\substack{+0.14 -0.13}$ at z = 6.15 and 6.35. Further, we also report 68th percentile upper limits of $\bar{x}_{\mathrm{H\, {\small I}}{}} \lt 0.21$, 0.20, 0.21, and 0.18 at z = 5.8, 5.95, 6.05, and 6.55. These results imply reionization is still ongoing at $5.8\lesssim \, z\lesssim \, 6.55$, consistent with previous results from XQR-30 (dark fraction and Lyα forest) along with other observational probes considered in the literature.

Greig, B. (ORCID:0000000240852094)↗

Galaxy Zoo DESI: large-scale bars as a secular mechanism for triggering AGNs

ABSTRACT Despite the evidence that supermassive black holes (SMBHs) co-evolve with their host galaxy, and that most of the growth of these SMBHs occurs via merger-free processes, the underlying mechanisms which drive this secular co-evolution are poorly understood. We investigate the role that both strong and weak large-scale galactic bars play in mediating this relationship. Using 48 871 disc galaxies in a volume-limited sample from Galaxy Zoo DESI, we analyse the active galactic nucleus (AGN) fraction in strongly barred, weakly barred, and unbarred galaxies up to $z = 0.1$ over a range of stellar masses and colours. After controlling for stellar mass and colour, we find that the optically selected AGN fraction is $31.6 \pm 0.9$ per cent in strongly barred galaxies, $23.3 \pm 0.8$ per cent in weakly barred galaxies, and $14.2 \pm 0.6$ per cent in unbarred disc galaxies. These are highly statistically robust results, strengthening the tantalizing results in earlier works. Strongly barred galaxies have a higher fraction of AGNs than weakly barred galaxies, which in turn have a higher fraction than unbarred galaxies. Thus, while bars are not required in order to grow an SMBH in a disc galaxy, large-scale galactic bars appear to facilitate AGN fuelling, and the presence of a strong bar makes a disc galaxy more than twice as likely to host an AGN than an unbarred galaxy at all galaxy stellar masses and colours.

Astronomy & Astrophysics↗