Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “finite difference methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A three-dimensional boundary-layer method for flow over delta wings with leading-edge separation

A three-dimensional, laminar boundary-layer method is applied to the incompressible flow over a slender delta wing at incidence. The predictor-corrector finite-difference scheme of Matsuno is used to difference the governing equations. The method has the advantages that no iterations are required to advance the solution and the cross-flow derivatives are formed independent of the cross-field direction. The difference scheme is demonstrated to yield accurate numerical results when compared to the exact solution of the three-dimensional boundary-layer equations for parabolic flow over a moving flat plate. The method is applied to delta wings of various sweep angles at angles of attack up to 20 deg., with the inviscid solution determined using a higher-order, three-dimensional panel method.

Woodson, S. H.↗

Steady-state and dynamic performance of a gas-lubricated seal

Steady-state and dynamic performance of a gas-lubricated, self-acting face seal was determined using numerical methods based on a variable grid, finite-difference, time-transient procedure. Results were obtained for a gas turbine main shaft seal operating at 206.9 newton per square centimeter (300 psi) sealed air pressure and 152.4 meters per second (500 ft/sec) sliding velocity. Analysis of the seal dynamics revealed that the response of the seal nosepiece to runout of the seat face is markedly affected by secondary seal friction and by nosepiece inertia. The nosepiece response was determined for various levels of secondary seal friction and seat face runout magnitudes.

Colsher, R.↗

The dynamics and control of large flexible space structures, 3. Part A: Shape and orientation control of a platform in orbit using point actuators

The dynamics, attitude, and shape control of a large thin flexible square platform in orbit are studied. Attitude and shape control are assumed to result from actuators placed perpendicular to the main surface and one edge and their effect on the rigid body and elastic modes is modelled to first order. The equations of motion are linearized about three different nominal orientations: (1) the platform following the local vertical with its major surface perpendicular to the orbital plane; (2) the platform following the local horizontal with its major surface normal to the local vertical; and (3) the platform following the local vertical with its major surface perpendicular to the orbit normal. The stability of the uncontrolled system is investigated analytically. Once controllability is established for a set of actuator locations, control law development is based on decoupling, pole placement, and linear optimal control theory. Frequencies and elastic modal shape functions are obtained using a finite element computer algorithm, two different approximate analytical methods, and the results of the three methods compared.

Bainum, P. M.↗

Experimental and numerical studies of the incompressible viscous flow over a two-dimensional airfoil

Physical and numerical experiments for the low Reynolds number flow over a two-dimensional NACA 66(3)-018 airfoil have been performed. Pressure distributions and smoke flow photographs have been obtained for a Reynolds number based on airfoil chord and free-stream conditions of approximately 40,000 at angles of attack of 0 and 6 deg, and for a Reynolds number based on airfoil chord and free-stream conditions of approximately 400,000 at angles of attack of 0 and 12 deg in a low turbulence wind tunnel. Finite difference numerical experiments, using an approximate factorization method, have been obtained for a Reynolds number of 40,000 at angles of attack of 0 and 6 deg. Although the comparison of the wind tunnel and computer results is encouraging, further studies of this type are clearly necessary.

Mueller, T. J.↗

Theory and application of radiation boundary operators

A succinct unified review is provided of the theory of radiation boundary operators. With the recent introduction of the on-surface radiation condition (OSRC) method and the continued growth of finite-difference and finite-element techniques for modeling electromagnetic wave scattering problems, the understanding and use of radiation boundary operators has become increasingly important. Results are presented to illustrate the application of radiation boundary operators in both these areas. Recent OSRC results include analysis of the scattering behavior of both electrically small and large cylinders, a reactively loaded acoustic sphere, and a simple reentrant duct. Radiation boundary operator results include the demonstration of the effectiveness of higher-order operators in truncating finite-difference time-domain grids.

Moore, Thomas G.↗

Review of FD-TD numerical modeling of electromagnetic wave scattering and radar cross section

Applications of the finite-difference time-domain (FD-TD) method for numerical modeling of electromagnetic wave interactions with structures are reviewed, concentrating on scattering and radar cross section (RCS). A number of two- and three-dimensional examples of FD-TD modeling of scattering and penetration are provided. The objects modeled range in nature from simple geometric shapes to extremely complex aerospace and biological systems. Rigorous analytical or experimental validatons are provided for the canonical shapes, and it is shown that FD-TD predictive data for near fields and RCS are in excellent agreement with the benchmark data. It is concluded that with continuing advances in FD-TD modeling theory for target features relevant to the RCS problems and in vector and concurrent supercomputer technology, it is likely that FD-TD numerical modeling will occupy an important place in RCS technology in the 1990s and beyond.

Taflove, Allen↗

Improved calculation of optimum design sensitivity

Optimum design parameter sensitivity analysis has become an important topic in recent years. The principal reasons for obtaining optimum design sensitivity information with respect to various problem parameters are (l) to predict revised optimum designs, associated with specified perturbations of the problem parameters, without re-optimizing the problem and, (2) to provide sensitivity information in multilevel optimization strategies. Methods for calculating these derivatives were proposed by several authors. The most important drawback in estimating parameter sensitivities by the current methods is that they do not allow for changes in the active constraint set. Changes in the active constraint set produce discontinuities in the optimum design sensitivities, and therefore, a correct formulation has to be cast in terms of directional derivatives. Optimum design parameter sensitivity analysis is addressed in terms of directional derivatives so as to include possible discontinuities and it also presents a method for estimating optimum design sensitivities using finite differences.

Sepulveda, Abdon E.↗

FD-TD modeling of 2-D dielectric waveguides for propagation and scattering of femtosecond optical solitons

Experimentalists have produced all-optical switches capable of 100-fs responses. To adequately model such switches, nonlinear effects in optical materials (both instantaneous and dispersive) must be included. In principle, the behavior of electromagnetic fields in nonlinear dielectrics can be determined by solving Maxwell's equations subject to the assumption that the electric polarization has a nonlinear relation to the electric field. However, until our previous work, the resulting nonlinear Maxwell's equations have not been solved directly. Rather, approximations have been made that result in a class of generalized nonlinear Schrodinger equations (GNLSE) that solve only for the envelope of the optical pulses. In this paper, we present first-time calculations from the vector nonlinear Maxwell's equations of femtosecond soliton propagation and scattering, including carrier waves, in two-dimensional systems of dielectric waveguides exhibiting the Kerr and Raman quantum effects. We use the finite-difference time-domain (FD-TD) method in an extension of our 1-D work. There, in a fundamental innovation, we treated the linear and nonlinear convolutions for the electric polarization as new dependent variables. By differentiating these convolutions in the time domain, we derived an equivalent system of coupled, nonlinear second-order ODE's. These equations together with Maxwell's equations form the system that is solved to determine the electromagnetic fields in inhomogeneous nonlinear dispersive media. Backstorage in time is limited to only that needed by the time-integration algorithm for the ODE's, rather than that needed to store the time-history of the kernel functions of the convolutions (1000-10,000 time steps). Thus, a 2-D nonlinear optics model from Maxwell's equations is now feasible.

Joseph, Rose↗

On Computations of Duct Acoustics with Near Cut-Off Frequency

The cut-off is a unique feature associated with duct acoustics due to the presence of duct walls. A study of this cut-off effect on the computations of duct acoustics is performed in the present work. The results show that the computation of duct acoustic modes near cut-off requires higher numerical resolutions than others to avoid being numerically cut off. Duct acoustic problems in Category 2 are solved by the DRP finite difference scheme with the selective artificial damping method and results are presented and compared to reference solutions.

Dong, Thomas Z.↗

Design of a Variational Multiscale Method for Turbulent Compressible Flows

A spectral-element framework is presented for the simulation of subsonic compressible high-Reynolds-number flows. The focus of the work is maximizing the efficiency of the computational schemes to enable unsteady simulations with a large number of spatial and temporal degrees of freedom. A collocation scheme is combined with optimized computational kernels to provide a residual evaluation with computational cost independent of order of accuracy up to 16th order. The optimized residual routines are used to develop a low-memory implicit scheme based on a matrix-free Newton-Krylov method. A preconditioner based on the finite-difference diagonalized ADI scheme is developed which maintains the low memory of the matrix-free implicit solver, while providing improved convergence properties. Emphasis on low memory usage throughout the solver development is leveraged to implement a coupled space-time DG solver which may offer further efficiency gains through adaptivity in both space and time.

Design↗

A multigrid method for steady Euler equations on unstructured adaptive grids

A flux-difference splitting type algorithm is formulated for the steady Euler equations on unstructured grids. The polynomial flux-difference splitting technique is used. A vertex-centered finite volume method is employed on a triangular mesh. The multigrid method is in defect-correction form. A relaxation procedure with a first order accurate inner iteration and a second-order correction performed only on the finest grid, is used. A multi-stage Jacobi relaxation method is employed as a smoother. Since the grid is unstructured a Jacobi type is chosen. The multi-staging is necessary to provide sufficient smoothing properties. The domain is discretized using a Delaunay triangular mesh generator. Three grids with more or less uniform distribution of nodes but with different resolution are generated by successive refinement of the coarsest grid. Nodes of coarser grids appear in the finer grids. The multigrid method is started on these grids. As soon as the residual drops below a threshold value, an adaptive refinement is started. The solution on the adaptively refined grid is accelerated by a multigrid procedure. The coarser multigrid grids are generated by successive coarsening through point removement. The adaption cycle is repeated a few times. Results are given for the transonic flow over a NACA-0012 airfoil.

Riemslagh, Kris↗

Boundary conditions for the solution of compressible Navier-Stokes equations by an implicit factored method

A method is presented for formulating the boundary conditions in implicit finite-difference form needed for obtaining solutions to the compressible Navier-Stokes equations by the Beam and Warming implicit factored method. The usefulness of the method was demonstrated (a) by establishing the boundary conditions applicable to the analysis of the flow inside an axisymmetric piston-cylinder configuration and (b) by calculating velocities and mass fractions inside the cylinder for different geometries and different operating conditions. Stability, selection of time step and grid sizes, and computer time requirements are discussed in reference to the piston-cylinder problem analyzed.

Shih, T. I.-P.↗

More About Generating Three-Dimensional Grids About Anything

Report presents additional details of mathematical basis and potential applications of method of generating three-dimensional grids fitted to bodies having arbitrary, complicated shapes. Grids used in finite-difference or finite-volume computations of flows around bodies. Grid-generation method involves numerical solutions of Poisson's equations described in "Generating Three-Dimensional Grids About Anything" (ARC-12620).

Sorenson, Reese L.↗

Comparison of Implicit Collocation Methods for the Heat Equation

We combine a high-order compact finite difference scheme to approximate spatial derivatives arid collocation techniques for the time component to numerically solve the two dimensional heat equation. We use two approaches to implement the collocation methods. The first one is based on an explicit computation of the coefficients of polynomials and the second one relies on differential quadrature. We compare them by studying their merits and analyzing their numerical performance. All our computations, based on parallel algorithms, are carried out on the CRAY SV1.

Kouatchou, Jules↗

Effects of using a posteriori methods for the conservation of integral invariants

The nature and effect of using a posteriori adjustments to nonconservative finite-difference schemes to enforce integral invariants of the corresponding analytic system are examined. The method of a posteriori integral constraint restoration is analyzed for the case of linear advection, and the harmonic response associated with the a posteriori adjustments is examined in detail. The conservative properties of the shallow water system are reviewed, and the constraint restoration algorithm applied to the shallow water equations are described. A comparison is made between forecasts obtained using implicit and a posteriori methods for the conservation of mass, energy, and potential enstrophy in the complete nonlinear shallow-water system.

Takacs, Lawrence L.↗

Computational methods for ideal compressible flow

Conservative dissipative difference schemes for computing one dimensional flow are introduced, and the recognition and representation of flow discontinuities are discussed. Multidimensional methods are outlined. Second order finite volume schemes are introduced. Conversion of difference schemes for a single linear convection equation into schemes for the hyperbolic system of the nonlinear conservation laws of ideal compressible flow is explained. Approximate Riemann solvers are presented. Monotone initial value interpolation; and limiters, switches, and artificial dissipation are considered.

Vanleer, B.↗

Comparative study of numerical schemes of TVD3, UNO3-ACM and optimized compact scheme

Three different schemes are employed to solve the benchmark problem. The first one is a conventional TVD-MUSCL (Monotone Upwind Schemes for Conservation Laws) scheme. The second scheme is a UNO3-ACM (Uniformly Non-Oscillatory Artificial Compression Method) scheme. The third scheme is an optimized compact finite difference scheme modified by us: the 4th order Runge Kutta time stepping, the 4th order pentadiagonal compact spatial discretization with the maximum resolution characteristics. The problems of category 1 are solved by using the second (UNO3-ACM) and third (Optimized Compact) schemes. The problems of category 2 are solved by using the first (TVD3) and second (UNO3-ACM) schemes. The problem of category 5 is solved by using the first (TVD3) scheme. It can be concluded from the present calculations that the Optimized Compact scheme and the UN03-ACM show good resolutions for category 1 and category 2 respectively.

Lee, Duck-Joo↗