Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “energy use behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Material efficiency and climate change mitigation of passenger vehicles

A transition to electric vehicles and renewable energy is currently underway but may not be rapid enough in order to reach ambitious climate change mitigation targets. Therefore, additional, preferably instantaneous, measures are needed for quick emissions reductions, which is where material efficiency (ME) could constitute a promising solution. ME strategies include but are not limited to vehicle lightweighting through material substitution, increased recycling of materials, reuse and remanufacturing of vehicle components, vehicle downsizing (switching to a smaller vehicle) and more intensive use by means of increased vehicle occupancy through sharing practices. While recent analyses have focused on a narrow subset of these, we find striking differences in the overall potential of different strategies to decrease vehicular carbon footprints. Downsizing and more intensive use offer the largest mitigation potential but strongly depend on consumer behavior and are highly sensitive to modeling assumptions. Combined, the analyzed strategies can achieve emission reductions of up to 57% over the life cycle of a single vehicle, which is comparable to up to 83% achieved through a shift to low-carbon energy supply. ME can cut carbon footprints of already efficient vehicles charging renewable electricity by half again. This makes ME both an excellent short-term solution for climate change mitigation targeting the light vehicle sector but also an important complementary strategy to the long-term transition towards electric vehicles and renewable energy supply.

54 ENVIRONMENTAL SCIENCES↗

Turbulent vortices in stratified fluids

In the present paper, calculations, made with the finite difference axisymmetric WAKE computer code, of the influence of turbulence and stratification on the behavior of vortex rings are compared with experimental data. Calculations, made with the two-dimensional version of the code, are used to study the behavior of vortex pairs in stably stratified atmospheres for a range of Froude numbers. Stratification is shown to have a profound effect on the radius of a vortex ring descending into a stably stratified fluid. The separation of the vortices of a vortex pair remains nearly constant or decreases monotonically with increasing penetration of a stably stratified fluid, depending on whether the stratification is discontinuous or linear. An analysis based on an energy balance is used to assess the maximum descent of a vortex pair in a stably stratified fluid.

Hecht, A. M.↗

OC6 Phase IV: Validation of CFD Models for Stiesdal TetraSpar Floating Offshore Wind Platform

ABSTRACT With only a few floating offshore wind turbine (FOWT) farms deployed anywhere in the world, FOWT technology is still in its infancy, building on a modicum of real‐world experience to advance the nascent industry. To support further development, engineers rely heavily on modeling tools to accurately portray the behavior of these complex systems under realistic environmental conditions. This reliance creates a need for verification and validation of such tools to improve reliability of load and dynamic response prediction and analysis capabilities of FOWT systems. The Offshore Code Comparison Collaboration, Continued with Correlation and unCertainty (OC6) project was created under the framework of the International Energy Agency to address this need and considers a three‐sided verification and validation between engineering level models, computational fluid dynamics (CFD), and experimental results. In this paper, a novel floating offshore wind platform, the Stiesdal TetraSpar, is simulated using CFD under the load conditions defined by Phase IV of the OC6 project. The comparison of these CFD results against the experimental results demonstrated the ability to predict the platform response to waves when imposing the measured wave signals as input. Although validation versus experiment was largely successful, the damping behavior was impacted by uncertainties likely originating from the mooring system and sensor umbilical cable. This extensive comparison effort with multiple CFD practitioners offers insight into best practices to achieve reliable results.

17 WIND ENERGY↗

Aging matrix visualizes complexity of battery aging across hundreds of cycling protocols

To reliably deploy lithium-ion batteries, a fundamental understanding of cycling aging behavior is critical. Battery aging consists of complex and highly coupled phenomena, making it challenging to develop a holistic interpretation. In this work, we generate a diverse battery cycling dataset with a broad range of degradation trajectories, consisting of 359 high energy density commercial Li(Ni,Co,Al)O 2 /graphite + SiO x cylindrical 21 700 cells cycled across 207 unique cycling protocols. We consolidate aging via 16 mechanistic state-of-health (SOH) metrics, including cell-level performance metrics, electrode-specific capacities/state-of-charges (SOCs), and aging trajectory metrics. We develop a framework using interpretable machine learning and explainable features to generate an aging matrix that visually deconvolutes the complex battery degradation behavior. This generalizable data-driven mechanistic framework simplifies the complex interplay between cycling conditions, degradation modes, and SOH, acting as a hypothesis-generation tool to aid battery users in identifying key degradation regimes for further study and experimentation.

25 ENERGY STORAGE↗

Influence of Nanoconfinement and Elevated Temperatures on Geocolloid-Facilitated Transport of Energy-related Contaminants

The main objective of this project is to obtain a better understanding of the transport behavior and interactions of geocolloids in the presence of energy- related contaminants under bulk and nanoconfined conditions. In that, we first established solid protocols to synthesize and fabricate numerous types of geocolloids with a. various sizes ranging from 40 – 800 nm and b. different hydrophile-lipophile balance (HLB) ratios in the range of 25:75 to 75:25. Direct force measurements with geocolloids having different degrees of surface coverages (i.e. HLB to realistically mimic adsorption of energy related contaminants) were conducted using the Surface Forces Apparatus (SFA) over a distance regime starting from 8μm all the way down to molecular contact. Repulsive forces were observed on approach starting from > 3μm, followed by an exponential increase of which magnitude appears to be larger than a decay length obtained from Derjaguin–Landau–Verwey–Overbeek (DLVO) theory in pure water. When the geocolloids were confined in salted water, the magnitude of onset of repulsion was varied as a function of salinity in solution, which can significantly alter a purely repulsive screened electrostatic (coulombic) interaction arising from, among geocolloids as well as between geocolloids and geosurfaces. The viscosity and flow characteristics of geocolloidal suspensions at different degrees of confinement were also investigated where we identified highly discontinuous rheological behaviors below a critical nanoconfinement level. We anticipate that the knowledge gained through this study will enable the scientists and researchers to better assess transport and fate behaviors of geocolloidal dispersions that can carry energy-related contaminants under realistically emulated geosystem.

03 NATURAL GAS↗

Avalanche gain and its effect on energy resolution in GEM-based detectors

Here, we present avalanche gain and associated resolution measurements recorded with a 4 He:CO 2 (70:30) gas mixture and pure SF 6 , a Negative Ion (NI) gas. SF 6 is of particular interest to the directional dark matter detection community, as its low thermal diffusion helps to retain recoil ionization track features over long drift lengths. With the aid of a general form of the reduced first Townsend coefficient (RFTC), multiple GEM-based detector data sets are used to study the high-gain behavior of the 4 He:CO 2 gas mixture. The high-gain data is well described purely in terms of the reduced electric field strength and the number of GEMs, and the robust relationship between the RFTC and the average, reduced, electric field strength across the GEMs is emphasized. The associated (pulse-height) resolution measurements are used to discuss the variance of the avalanche distribution and to describe and estimate the lower limits of energy resolution one should expect to measure using a simple relationship with the RFTC. In the end, a description of avalanche gain, its effect on energy resolution, and the contributing experimental parameters in GEM-based detectors is developed over a broad parameter space for further use.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Role of Nuclear Data Sensitivities in Prompt α-Eigenvalue Predictions of Delayed Critical Benchmarks

Alpha (α) eigenvalues, which describe the logarithmic time derivative of the neutron population in a multiplying system, are integral to time-dependent behavior and diagnostic applications. However, uncertainties in the evaluated nuclear data can significantly impact the accuracy of transport simulations for such quantities. This work explores the use of machine learning models to predict two key outputs, α-eigenvalues and keff bias, using input features derived from α-eigenvalue sensitivities to nuclear data. The criticality safety benchmark models used in this study come from the International Handbook of Evaluated Criticality Safety Benchmark Experiments. Three models, random forest, XGBoost, and NGBoost, are trained on both energy-resolved and energy-summed α sensitivities. For the α-eigenvalue bias prediction, NGBoost achieved the highest R 2 (0.9476) using energy-resolved features, while XGBoost performed best using summed sensitivities. In contrast, when predicting the keff bias, all the models showed moderate predictive capability (best R 2 ≈ 0.72), as the mapping from the static α-sensitivities to the static keff bias was less direct. SHAP (SHapley Additive exPlanations) analysis was used to interpret the model predictions. Across both prediction tasks, the features associated with neutron capture [H-1 (n, γ)], uranium scattering reactions (such as 235 U elastic/inelastic), and actinide capture/fission reactions (such as 239 Pu and 234 U) were consistently identified as the most impactful. This highlights the key role of specific nuclear reactions and energy ranges in shaping both time-dependent and steady-state criticality behavior. These results demonstrated that α-sensitivities, despite being computed for time-dependent metrics, can provide valuable insights for predicting both α-eigenvalues and the keff bias. Moreover, machine learning models offer a promising pathway for uncovering important nuclear data dependencies and guiding future data evaluation efforts.

Nuclear data↗

Problem-tailored Simulation of Energy Transport on Noisy Quantum Computers

The transport of conserved quantities like spin and charge is fundamental to characterizing the behavior of quantum many-body systems. Numerically simulating such dynamics is generically challenging, which motivates the consideration of quantum computing strategies. However, the relatively high gate errors and limited coherence times of today's quantum computers pose their own challenge, highlighting the need to be frugal with quantum resources. In this work we report simulations on quantum hardware of infinite-temperature energy transport in the mixed-field Ising chain, a paradigmatic many-body system that can exhibit a range of transport behaviors at intermediate times. We consider a chain with L = 12 sites and find results broadly consistent with those from ideal circuit simulators over 90 Trotter steps, containing up to 990 entangling gates. To obtain these results, we use two key problem-tailored insights. First, we identify a convenient basis – the Pauli Y basis – in which to sample the infinite-temperature trace and provide theoretical and numerical justifications for its efficiency relative to, e.g., the computational basis. Second, in addition to a variety of problem-agnostic error mitigation strategies, we employ a renormalization strategy that compensates for global nonconservation of energy due to device noise. We discuss the applicability of the proposed sampling approach beyond the mixed-field Ising chain and formulate a variational method to search for a sampling basis with small sample-to-sample fluctuations for an arbitrary Hamiltonian. This opens the door to applying these techniques in more general models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A DNN surrogate unsteady aerodynamic model for wind turbine loads calculations

A recurrent deep-neural network (DNN) surrogate model capable of modeling the unsteady aerodynamic response and dynamic stall behavior of wind turbine blades has been developed and validated for use in engineering design codes. The model is trained using a subset of the oscillating airfoil experiments conducted at the Ohio State University wind tunnel. The predictions from our DNN model show excellent agreement with the measured data and, in all cases, a marked improvement over the state-of-the-art unsteady aerodynamic models. The DNN-based unsteady aerodynamics model was integrated with OpenFAST to perform full-turbine load computations for the NREL-5MW rotor. The largest differences are observed for the inboard stations, particularly in the pitching moment response, when using the new surrogate model compared to the other models available in OpenFAST.

17 WIND ENERGY↗

Survivability of Affordable High Temperature Polymer Matrix Composites for Propulsion Engine Components

PMR-type polyimides are regarded as state of the art high temperature polymers, due to their excellent thermo-mechanical properties and thermo-oxidative stability. One of their drawbacks, however is the inability to process them using cost-effective processing methods such as Resin Transfer Molding (RTM) and Resin Film Infusion (RFI). Development of low viscosity, high temperature polymers has been the subject of intense research. Recently, a new generation of low viscosity polyimides were synthesized by the introduction of twisted biphenyl or binapthyl groups into the backbone. This report details the progress for Year 1, which has involved acquiring samples and initiating Phases I and II of the proposed research. Specifically, studies of the process-property relationships of a series of polymers using oligomers based on 2,3,3' ,4'-biphenyltertracarboxylic dianhydride (PBDA) and a mixture of a diamine, BAX and a triamine, 1,3,5-Tris (4-aminophenoxybenzene), TAB, where the amount of TAB was varied have been initiated. The sample containing 10 percent TAB possesses a slightly higher degree of crystalline order versus that of the 20 percent TAB sample, based on x-ray diffraction studies of the b-staged oligomers. Both systems lose all of the crystalline order upon curing, however. The chemorheology has been studied as a function of the TAB content. While the magnitude of the viscosity is essentially the same for both systems, the cure kinetics of the 10 percent TAB system is faster than that for the 20 percent TAB system. The sample exhibits a melting-recrystallization-remelting behavior before the crosslinking commences. Correlation of other kinetic parameters, such as the activation energies for curing, the Tg and mechanical properties to the structure of these systems is underway. Future studies will involve characterization of mechanical and thermal properties of the pure resins and the fabrication of fiber reinforced composites using these materials.

Dean, Derrick↗

Large Solar-Rejection Filter

NASA utilized Image Intensified Video Cameras for ATV data acquisition from a jet flying at 12.8 km. Afterwards the video was digitized and then analyzed with a modified commercial software package, Image Systems Trackeye. Astrometric results were limited by saturation, plate scale, and imposed linear plate solution based on field reference stars. Time-dependent fragment angular trajectories, velocities, accelerations, and luminosities were derived in each video segment. It was evident that individual fragments behave differently. Photometric accuracy was insufficient to confidently assess correlations between luminosity and fragment spatial behavior (velocity, deceleration). Use of high resolution digital video cameras in future should remedy this shortcoming. A scenically accurate description of matter interpreted as a substance made up of corpuscular constituents was established during the course of the 19th century. In this description, atoms--the building blocks of the matter--form molecules. The properties of the molecules were described by chemistry or thermodynamics depending on what characteristics of the matter were investigated. In both theories, the molecules can dissociate to atoms when the kinetic energies of the atoms exceed the strength of the chemical bonds. The number of atoms is always preserved in a closed system. This is not true, however, when the matter takes up much higher energies at relativistic scales. New particles can be produced at the expense of the kinetic energy. The number of particles is no longer preserved. There are other conserved quantities, however, these quantities, the charge, baryon number, lepton number, are associated with particles that are considered elementary today. The properties and behavior of these elementary particles is the subject of Particle Physics or High Energy Physics. Practice Page: A crewmember touching a positively charged surface was thought to be galvanically isolated from the vehicle ground analogous to a bird on a high voltage power wire. Recent analysis confirms that positive floating potentials, ionospheric currents to the EVA suit, can be hazardous. The analysis is wrong in that the ionospheric plasma itself can close the circuit. Parametric analysis of very low voltage exposures (2 to 15 volts) could cause pain and/or involuntary muscle tetani or spinal cord shock. NASA worked with the Naval Health Research Center Detachment Directed Energy Bioeffects Laboratory to examine the affects electrical hazards could have on extravehicular activity using two models. The results of the two computational models were combined to predict areas of the body in which neurons of different diameters would be excited. They predicted that physiologically active current could be conducted across the crew member causing catastrophic hazards. Future work to analyze additional current paths was proposed. The FUSE spectrum of BB Dor, observed in a high state, is modeled with an accretion disk with a very low inclination (possibly lower than 10 degrees). Assuming an average WD mass of 0.8 solar mass leads to a distance of the order of approximately 650pc, consistent with the extremely low galactic reddening in its direction, and a mass accretion rate of 10 (exp -9) solar mass a year. The spectrum presents some broad and deep silicon and sulfur absorption lines, indicating that these elements are over-abundant: silicon is 3 times solar, and sulfur is 20 times solar. The FUSE spectrum of BB Dor, observed in a high state, is modeled with an accretion disk with a very low inclination (possibly lower than 10 degrees). Assuming an average WD mass of 0.8 solar mass leads to a distance of the order of approximately 650pc, consistent with the extremely low galactic reddening in its direction, and a mass accretion rate of 10 (exp -9) solar mass a year. The spectrum presents some broad and deep silicon and sulfur absorption lines, indicating that these elements are over-abundant: silicon is times solar, and sulfur is 20 times solar. From its previously observed optical emission lines, P831-57 (WD 0334 6400 or Ret 1 in A Catalog and Atlas of Cataclysmic Variables: Living Edition) has been suspected to contain an accretion disk associated with a companion star in orbit around a subdwarf star with a temperature T is greater than 21,000K. P831-57 has therefore been classified as a nova-like. However, our present observations show it to be a DA + dMe binary. The analysis of its Far Ultraviolet Spectroscopic Explorer (FUSE) spectrum (continuum and lines) reveal an average mass white dwarf (Log(g) approximately equals 7.8 plus or minus 0.1)with a temperature T approximately equals 37,000 plus or minus 500K, an extremely low projected rotational velocity, and a distance of about 115 plus or minus 5pc. The photosphere contains C, N, Si, and S (at about 1% of solar abundances). The dMe star is seen as a flux excess in near-infrared photometry and appears to show occasional flaring of about one magnitude as seen in the Harvard plates. There is no evidence of periodic variability in the spectroscopic or photometric data. We find no evidence of a an accretion disk, instead we find evidence of wind accretion as the stellar carbon abundance (N(C)/N(H) = 2.5 x 10 (exp -6) is about ten times larger than predicted by radiative levitation for such a gravity and temperature. The power needs and solutions for the space exploration and lunar mobility program are discussed. Long term missions in space and on the lunar surface require high energy batteries. Rechargeable batteries for mobility systems and portable utility pallet are needed for successful exploration missions. Nanomaterial usage increases the energy density of the cells apart from increasing the power density. The symptoms and threats from acute mountain sickness (AMS) are discussed. The underlying assumptions concerning spacecraft atmosphere mean there is a potential risk to astronauts. The baseline worst case scenario is about 25% based on direct ascent to 8.0 psia with 32% O2. The practical mitigation approach is a staged depressurization scheme. Due to the uncertainty about potential AMS risk the flight surgeon should prepare, focused research should proceed, and current analytical efforts should continue. This slide presentation reviews the threat astronauts face from acute mountain sickness (AMS). The incidence of AMS is highly variable and the risk to astronauts is unclear. However, the potential risk is higher than current EAAs suggest and precautions should be implemented. Due to the uncertain nature of the risk flight surgeons should prepare, and focused research should proceed. Quasiparticle tunneling can be understood at low temperatures using a non-equilibrium kinetic theory. Low-temperature tunneling can be suppressed using existing techniques: island-lead gap engineering, lead cooling with SIN junctions, and quasiparticle traps. The slide presentation reviews the science goals and mission planning for the proposed Jupiter System Observer (JSO). The spacecraft would accommodate 9 instruments making the instrument payload more capable than any previously flown to Jupiter. The would-be mission includes study programs for Jupiter's satellites, interior, magnetosphere and atmosphere. The power needs and solutions for the space exploration and lunar mobility program are discussed. Long term missions in space and on the lunar surface require high energy batteries. Rechargeable batteries for mobility systems and portable utility pallet are needed for successful exploration missions. Nanomaterial usage increases the energy density of the cells apart from increasing the power density. This slide presentation reviews the power requirements for the space exploration and the lunar surface mobility programs. It includes information about the specifications for high energy batteries and the power requirements for lunar rovers,

Roberts, William↗

Effects of transient fission gas release on rod balloon burst behavior during a loss-of-coolant accident

The US nuclear energy industry is investigating strategies to increase the reactor operating cycle to 24 months, which would result in rod average burnups exceeding the current limit of 62 GWd/tU. To support this goal, multiphysics simulations tools and methodologies are being developed to predict the effects of this change during transient events such as loss-of-coolant accidents (LOCAs). In this work, two cladding burst correlations were used to predict cladding failure. Here, these were coupled with three transient fission gas release (tFGR) models and were implemented in the BISON fuel performance code to quantify any changes in cladding burst behavior during a large-break LOCA. First, a simple linear model was used to perform a sensitivity analysis of a single fuel rod. Second, a tFGR model available in BISON was applied to 281 fuel rods throughout the core. The third model examined was an empirical correlation based on data from the literature.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

BAMBAM (The Behavior and Advanced Mobility Big Access Model) [SWR-25-123]

Access modeling toolkit for Rust built on the RouteE Compass energy-aware route planner. The Behavior and Advanced Mobility Big Access Model (BAMBAM) is a mobility research platform for scalable access modeling. The process begins with a grid defined at some spatial granularity (e.g., census block or 1 km grid) and a variety of travel configurations. For each grid cell and configuration, the platform executes constrained searches, uses the results to index points of interest (POI), and aggregates the findings to the grid level. It provides researchers access through R or Python running on HPC. The platform automates the import and merging of datasets from a variety of sources including data.gov (with automatic merging of Tiger/Lines geometries), OpenStreetMaps, OvertureMaps, and GTFS. It is built upon RouteE Compass, a scalable, energy-aware route planner written in Rust, extended to model multiple travel modes.

Fitzgerald, Robert [National Renewable Energy Labo↗

Self-Diffusivity Measurement of Eutectic F 7 LiNaK with and without Additives Using Quasi-Elastic Neutron Scattering

The atomic scale relaxation dynamics of eutectic F 7 LiNaK (46.5 LiF–11.5 NaF–42 KF mol %, Li-7 enriched) were measured using quasi-elastic neutron scattering (QENS) over a temperature range of 500–750 °C. Here, the effect of adding 0.988 mol % cerium, 0.499 mol % cesium, and 1.21 mol % zirconium individually to the dynamics of F 7 LiNaK was also investigated. The relaxation process in both pure and doped F 7 LiNaK molten salts was fit with a stretched exponential function and the temperature dependence follows an Arrhenius behavior over a wavevector transfer range of 0.4 Å –1 < Q < 0.9 Å –1 . The measured activation energy for self-diffusion is E a = 0.77 ± 0.02 eV/atom for pure molten F 7 LiNaK. The QENS response with additives added to F 7 LiNaK was also fit with a stretched exponential and the associated Arrhenius behavior was characterized with activation energies of E a = 0.88 ± 0.01 eV/atom for zirconium (1.21 mol %), E a = 1.02 ± 0.02 eV/atom for cerium (0.988 mol %), and E a = 0.71 ± 0.03 eV/atom for cesium (0.499 mol %). The measured diffusivities are compared to those simulated with a neural network force field model by Lee et al. [Lee, S.-C. Comparative Studies of the Structural and Transport Properties of Molten Salt FLiNaK Using the Machine-Learned Neural Network and Reparametrized Classical Forcefields. J. Phys. Chem. B 2021, 125(37), 10562–10570].

FLiNaK↗

The behavior of fragments of comet Shoemaker-Levy 9 in the atmosphere of Jupiter

Studies of the entry of fragments of comet Shoemaker-Levy 9 into the atmosphere of Jupiter give conflicting predictions as to whether or not most of the energy is deposited above the clouds. Using analytical models, we find that for a typical fragment radius of 1.5 km, both deceleration and mass loss (ablation) are negligible above the 1 bar level, so most of the energy will be deposited below the clouds, where radiation is blocked from escaping. The bulk of the energy produced by entering fragments will be observable only if the energy deposited below the clouds is transported above the clouds by means other than radiation. We provide new calculations of the flattening of fragments by ram pressure, of radiation-driven evaporative ablation and of ablation of droplets formed by Kelvin-Helmholtz instability.

Field, G. B.↗

Spectroscopy of Low Mass X-Ray Binaries: New Insights into Accretion

This project is to observe two low mass X-ray binaries, chosen for their X-ray brightness, low column density, and diversity of accretion behavior. The high spectral resolution of the RGS, the broad energy range and tremendous collecting power of EPIC, and simultaneous optical monitoring with the OM are particularly well-suited to these studies. observation of one of the two objects has taken place and the data were received in late November. The second object is yet to be observed. Over the next year we will: investigate the physical conditions of the emitting gas using emission and recombination line diagnostics to determine temperatures, densities, elemental abundances, and ionization structure; study the behavior of emission features as a function of binary orbit; and test and improve models of X-ray line emission developed by us over the past decade. We will gain insight on both the geometry of the accretion flow and on the evolutionary history of LMXBs.

DilVrtilek, Saeqa↗

Understanding the Role of Lithium Iodide in Lithium–Oxygen Batteries

Lithium–oxygen (Li–O 2 ) batteries possess a high theoretical energy density, which means they could become a potential alternative to lithium-ion batteries. Nevertheless, the charging process of Li–O 2 batteries requires much higher energy, due to the insulating nature of the discharge product. It has been revealed that the anion additive, lithium iodide (LiI), can tune the cell chemistry to form lithium hydroxide (LiOH) as the product and facilitate the kinetics during the charging process. Although numerous studies have been reported, the role of this additive is still under investigation. Herein, the recent advances focusing on the use of LiI in Li–O 2 batteries are reviewed, its catalytic behavior on discharge and charge is discussed, and its synergistic effect with water is understood. Here, the ambiguity existing among the studies are also revealed, and solutions to the current issues are introduced.

25 ENERGY STORAGE↗

Global biomass supply modeling for long-run management of the climate system

Bioenergy is projected to have a prominent, valuable, and maybe essential, role in climate management. However, there is significant variation in projected bioenergy deployment results, as well as concerns about the potential environmental and social implications of supplying biomass. Bioenergy deployment projections are market equilibrium solutions from integrated modeling, yet little is known about the underlying modeling of the supply of biomass as a feedstock for energy use in these modeling frameworks. We undertake a novel diagnostic analysis with ten global models to elucidate, compare, and assess how biomass is supplied within the models used to inform long-run climate management. With experiments that isolate and reveal biomass supply modeling behavior and characteristics (costs, emissions, land use, market effects), we learn about biomass supply tendencies and differences. The insights provide a new level of modeling transparency and understanding of estimated global biomass supplies that informs evaluation of the potential for bioenergy in managing the climate and interpretation of integrated modeling. For each model, we characterize the potential distributions of global biomass supply across regions and feedstock types for increasing levels of quantity supplied, as well as some of the potential societal externalities of supplying biomass. We also evaluate the biomass supply implications of managing these externalities. Finally, we interpret biomass market results from integrated modeling in terms of our new understanding of biomass supply. Overall, we find little consensus between models on where biomass could be cost-effectively produced and the implications. We also reveal model specific biomass supply narratives, with results providing new insights into integrated modeling bioenergy outcomes and differences. The analysis finds that many integrated models are considering and managing emissions and land use externalities of supplying biomass and estimating that environmental and societal trade-offs in the form of land emissions, land conversion, and higher agricultural prices are cost-effective, and to some degree a reality of using biomass, to address climate change.

09 BIOMASS FUELS↗